Samsung Galaxy Tab 2 P5110 freeze. Can not turn it off - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

Hi,
yesterday I rooted my Samsung Galaxy Tab 2 P5110 and flashed CM 10.1 RC2.
First I worked like but then it freezes and just leaves a black screen. If I press the power button for about 10 seconds the backlight goes on for a couple of seconds and then again a black screen.
It seems that the tablet is frozen. If I connect it to my PC it will be mounted as "GT-5110" and I have access to the intern and extern sd-card. If I ping the ip address I get a response.
But I can not turn it off! Tried a lot of power, power+louder, power+silencs button combinations.
Any ideas what I can do now?
Thanks!

This is the galaxy tab 10.1 section, not the galaxy tab 2.
Seems like you bricked your device

Related

[Q] TouchWiz crashed my Tab

I installed the update on a nonrooted galaxy tab 10.1. Now it is stuck trying to reboot. Try to do a factory reset, and it won't work. I would like to root it so I can access some files while i'm traveling. What's the best, quickest option?
I got a problem too
After updating my device and rebooting it, everything seemed to be fine. It turned on, (Samsung GALAXY TAB 10.1) logo appeared, then instead of getting the normal screen all i got was unreadable screen made of small pixels, like an old broken tv. I know the screen is not broken because of the logo at first (which I tried to restart several times and always the logo is fine but what's after the logo is not working) Also I tried plugging in my device later and the battery icon that indicates it's charging when it's turned off is perfectly normal. But I can't seem to use my device or even see the main screen PLEASE HELP!!
Bricked!
Downloaded the TW update this morning, and then attempted to install it immediately. After a couple of minutes, it told me the installation failed and to either contact Samsung or do something with the Kies.
I OK'ed out of the dialogue boxes and then it asked me to reboot. I said 'yes'. When I did, upon it restarting, saw a new Samsung Galaxy Tab 10.1 logo (and the music). Then it went to a scrambled screen and totally unusable Tab.
Called Samsung customer service twice. I was told how to start the Tab in "Manual Mode" (I guess I would call it going into dev or recovery mode). Wiped everything and did a Factory Reset. When I reboot, it hangs on that new logo a little longer, but still is screwed up.
So, while I was on the phone with the second Samsung tech, I realized that this thing was going to have to go to Samsung for repair - so I decided to click around a little. I started the Tab again in Manual Mode, but before I got to the wipe and reset options, I got two icons. One was a Android robot (with the word "Downloading" below it) and the other was a box with an arrow coming out of it next to a smaller android robot. I decided to choose the Robot with the downloading below it.
When I do that, I get to a "ODIN3 Download Mode" screen. From this point, I feel that I am close to being able to restoring the Tab to stock - but I have no idea what to do from here. The screen has some ASCII text at the top left. It says "Connected! Press the [Start] of Odin3!!". There is a large Android robot in the middle of the screen. Below it is "Downloading..." and "Do not turn off target!!".
What can I do to bring my Tab back from the brink? HELP!!!
I have noticed I can plug the Tab into the pc and see what is on the Tab. So, I can still put files ON the Tab and run them from the recovery screen.
thanks in advance!
Kitster

[Q] problem with my galaxy s2 home button

Hello, I have a problem with my galaxy s2 home button, it keeps opening the voice command by itself every 1 sec and this problem won't let me charge my phone,
After resetting the factory and changinglem the firmware.. the problem still exists.
Any help?

[Q] Galaxy S2 I-9100 Lock Button Broken

Ok, so I've had my samsung galaxy s2 international for a few months now and my lock button has suddenly stopped working. It was working on/off for a while, however it has suddenly stopped functioning. There shows no sign of damage and is not 'stuck' . If anyone is able to tell me how i could fix it that would be great.

Galaxy s2 doesnt display on tv

My samsung galaxy s2 will not work when using MHL adapter to hd tv i just get a blank screen,
like you would see if the tv doesn't recognize anything plugged into the port, It did work 3 days ago when I installed an original ROM but now All iI see is a blank screen
is there a setting on my phone that isn't on or what do you think?
THANKS!​
anyone?
IVE SOLVED IT BY MYSELF!!
Here is the solution:
GO TO RECOVERY MODE
ADVANCED
CHOOSE FIX PREMISSION
RUN IT
RESTART YOUR PHONE.
ENJOY
Yesterday same thing happened to me. I just rebooted the phone and it worked.

Tab 10.1 suddenly stopped working

Hello guys so my tab suddenly stopped working when I opened the back of it, I didn't removed battery or anything it is not showing on PC, tried the 10-30 second power button holding didn't help. Here are the pictures of the back and front.

Categories

Resources