Well come back to life my Galaxy S3-i9300 - Galaxy S III Q&A, Help & Troubleshooting

Hi
sorry for my bad english
a few days ago i did an update via odin.i mean i want to change firmware to another stock rom to test battery life and something else but my mistake is that i used PIT file.that erase every thing and after that S3 freeze at boot logo ,very lagy and restart by itself.
i searched internet and unfourtunately i found my s3 bricked
but now its ok and the solution is ever u used PIT(partition information table)u must flash files that ur s3 need.
=================================================
1-u must use correct version of samsung galaxy s3(i9300) = Odin3 v3.04
2-go to download mode by presing volume down + menu + power and then select wolume up
3-flash pit file with odin .phone will restart and then enter download mode by step 2 again then go to step 4 (this isnt necessary more)
4-if u want flash desired stock rom do this by PDA button
5-if u do step 4 then restart or not flash PARAM.bin by PHONE button via odin
thats the point , param.bin is the solution for s3
its worked for my dead galaxy s3 gt-i9300 and i thought that bricked
=======================
extract files and uses them
i extracted param.bin from a stock korean firmware
hope it will help who search for solution :victory:

---

Good but Really works ??

---

hi
i think this can help if use PIT file.i test without using PIT file and no problem happens.
if phone is slow and laggy and restart with no reason i think its good to test this solution.however this file available in boot loader and main firmware file but flash it instead of those can help

---

when u flash .pit or .param do you need to enable Re-partition on Odin?

---

murphy0 said:
when u flash .pit or .param do you need to enable Re-partition on Odin?
Click to expand...
Click to collapse
Should be pit yes param no. Though param is the 4th partition on the mmc.

---

Not working 4 me.....
Flashed pit, reboot to DL-Mode, Flashed ROM -> Blue Bootanimation Loop

---

z0mg.jer1Cho said:
Not working 4 me.....
Flashed pit, reboot to DL-Mode, Flashed ROM -> Blue Bootanimation Loop
Click to expand...
Click to collapse
try over recovery mode and wipe data and cache

---

mostafaz said:
try over recovery mode and wipe data and cache
Click to expand...
Click to collapse
haven't counted, but tried this a lot of times :/
Never the Less, sent my Phone to Service Center (with Flashcounter 14, thank god im living in Germany )

---

mostafaz said:
Hi
sorry for my bad english
a few days ago i did an update via odin.i mean i want to change firmware to another stock rom to test battery life and something else but my mistake is that i used PIT file.that erase every thing and after that S3 freeze at boot logo ,very lagy and restart by itself.
i searched internet and unfourtunately i found my s3 bricked
but now its ok and the solution is ever u used PIT(partition information table)u must flash files that ur s3 need.
=================================================
1-u must use correct version of samsung galaxy s3(i9300) = Odin3 v3.04
2-go to download mode by presing volume down + menu + power and then select wolume up
3-flash pit file with odin .phone will restart and then enter download mode by step 2 again then go to step 4 (this isnt necessary more)
4-if u want flash desired stock rom do this by PDA button
5-if u do step 4 then restart or not flash PARAM.bin by PHONE button via odin
thats the point , param.bin is the solution for s3
its worked for my dead galaxy s3 gt-i9300 and i thought that bricked
=======================
extract files and uses them
i extracted param.bin from a stock korean firmware
hope it will help who search for solution :victory:
Click to expand...
Click to collapse
is that for galaxy s3 i9300 16 gb internacional europe ?
---------- Post added at 01:04 AM ---------- Previous post was at 01:01 AM ----------
mostafaz said:
Hi
sorry for my bad english
a few days ago i did an update via odin.i mean i want to change firmware to another stock rom to test battery life and something else but my mistake is that i used PIT file.that erase every thing and after that S3 freeze at boot logo ,very lagy and restart by itself.
i searched internet and unfourtunately i found my s3 bricked
but now its ok and the solution is ever u used PIT(partition information table)u must flash files that ur s3 need.
=================================================
1-u must use correct version of samsung galaxy s3(i9300) = Odin3 v3.04
2-go to download mode by presing volume down + menu + power and then select wolume up
3-flash pit file with odin .phone will restart and then enter download mode by step 2 again then go to step 4 (this isnt necessary more)
4-if u want flash desired stock rom do this by PDA button
5-if u do step 4 then restart or not flash PARAM.bin by PHONE button via odin
thats the point , param.bin is the solution for s3
its worked for my dead galaxy s3 gt-i9300 and i thought that bricked
=======================
extract files and uses them
i extracted param.bin from a stock korean firmware
hope it will help who search for solution :victory:
Click to expand...
Click to collapse
is that for galaxy s3 i9300 16 gb internacional europe ?

---

hi
yes gt-i9300
international

---

PIT file
mostafaz said:
hi
yes gt-i9300
international
Click to expand...
Click to collapse
hello,I had initially no WIFI, then a few days later brick.
Hopefully boot always correct and I could flash some original ROM.
But doing so the IMEI and other where lost (while files are written in the EFS partition-directory
My 9300 INT (Europe-France) works but limited to Wifi. 4.1.2 version with EMG4 (recent 2013 july) the 9300 date sept 2012
The EFS was probably overriden
I flashed different ROMS and could not have it back, but I did not try to use PIT rebuilding.
I am actually with an EMG4 modem - so I just wonder
Is the param.bin a descriptive file fro PIT ?
If not what kind of PIT file may I use ? is it included in a part of the ROM files ?
If I put the complete rom file in the PIT window of ODIN, will ODIN use only PIT? or will it FLASH the complete ROM + PIT.
SOrry to be new to this, I can understand shell, ADB, busybox, root etc, but the way the flashing is mounting files and partitioopns escapes me.
Thank you in advance if someone can give me a hand.
Regards
PS I had seen almost 100 pages of different methods and no real TUTO when no backup is find (I may have one at some point but on another SD...
So I know no miracle exist, out of specific equipment. , box, ...
Sorry for the 10001 quetion about the same troublewith IEMI/EFS

---

Help
there is no PIT partition here

---

i can't understand if i need to flash param or not. if its not needed then why download it ?

---

i can't connect to wifi and can't use dialer, does above method solve my problem ?