SIII freezing problem after the update 4.3 - Galaxy S III Q&A, Help & Troubleshooting

Hi every one
My freezing problem after the update 4.3 all I got black screen with samsung word :crying::crying::crying:
Can any one help me ?

Factory reset, reflash -search and read.

My English is so bad can you help me cause I get lost on search

Maybe if you give some details someone can help you.
Is your s3 rooted? If yes which ROM and kernel are you using? How did you update to 4.3?

Desert Cheetah said:
My English is so bad can you help me cause I get lost on search
Click to expand...
Click to collapse
Phone Freezes
http://forum.xda-developers.com/showthread.php?t=2133401

chandnit said:
Maybe if you give some details someone can help you.
Is your s3 rooted? If yes which ROM and kernel are you using? How did you update to 4.3?
Click to expand...
Click to collapse
NOT rooted I'm using official ROM and it's phone update from samsung

Choices
One factory reset
Two flash stock rom via Odin .
Three take it to a Samsung service centre .

I solved it
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
Click to expand...
Click to collapse
I used this link
Code:
sammobile.com/firmwares/3/?download=25529
thanks all

Related

"Issue Resolved" HELP I think i just bricked my phone

Need help.
I did a factory reset through the rom and now its blank after the boot screen
I was able to boot into a download mode I think where I hold vol down, home and power.
it says a custom OS can cause critical problems in phone and installed apps
if you want to download a custom OS, press the vol up key, otherwise press vol down
I pressed vol up and
It says its on Odin mode
custom binary download: NO
current binary: samsung official
Downloading...
Do not turn off target!!!
what do I do?? help
wanewon said:
Need help.
I did a factory reset through the rom and now its blank after the boot screen
I was able to boot into a download mode I think where I hold vol down, home and power.
it says a custom OS can cause critical problems in phone and installed apps
if you want to download a custom OS, press the vol up key, otherwise press vol down
I pressed vol up and
It says its on Odin mode
custom binary download: NO
current binary: samsung official
Downloading...
Do not turn off target!!!
what do I do?? help
Click to expand...
Click to collapse
well would suggest u to reflash ur stock firmware once again from Odin
Sun90 said:
well would suggest u to reflash ur stock firmware once again from Odin
Click to expand...
Click to collapse
yes I was wishing that I could do that but I have no idea how..
a little step by step instruction would be much appreciated !!!
wanewon said:
yes I was wishing that I could do that but I have no idea how..
a little step by step instruction would be much appreciated !!!
Click to expand...
Click to collapse
check the link below for the same
http://forum.xda-developers.com/showthread.php?t=1075278
thanks. quick question.
My device is rooted, do i need to unroot to do it? and after I flashed the stock firmware. would my device still be rooted (if unrooting is not needed)
wanewon said:
thanks. quick question.
My device is rooted, do i need to unroot to do it? and after I flashed the stock firmware. would my device still be rooted (if unrooting is not needed)
Click to expand...
Click to collapse
no need to unroot ma8, since flashing stock firmware will automatically unroot ur phone, after that if u need root then u can always do so
ps- ensure that u dwnld the proper firmware meant for ur device(if its I9100 then the one corresponding to it) and follow the ODIN instruction carefully for a successfull flash
1). Download official firmware for your device from samobile.com , Google and download Odin .
2) Extract the zip downloaded from samobile . It will be a .tar or .tar.md5 file.
3) Boot into Odin mode like u did earlier
4) Run Odin and connect your device . Odin will detect and will show the port number.
5) In PDA ,select the extracted file.
Don't change any other option .
6) Press Start
Odin will flash the binary . Wait till process is complete. On completion it shows pass.
Your phone will boot automatically.
Sent from my GT-I9100G using xda app-developers app
yeah, its i9100
is this firmware correct?
https://androidfirmwares.net/PhoneFirmware/Download/118
wanewon said:
yeah, its i9100
is this firmware correct?
https://androidfirmwares.net/PhoneFirmware/Download/118
Click to expand...
Click to collapse
yes, its the one
Sun90 said:
yes, its the one
Click to expand...
Click to collapse
thanks. Im about to proceed with it. also do I need to flash the kernel too? I downloaded the kernel file too which extracted into tar.md5 file.
thanks again
wanewon said:
thanks. Im about to proceed with it. also do I need to flash the kernel too? I downloaded the kernel file too which extracted into tar.md5 file.
thanks again
Click to expand...
Click to collapse
which kernel file?
Sun90 said:
which kernel file?
Click to expand...
Click to collapse
this one
https://www.androidfirmwares.net/PhoneKernel/Download/54
this under XWLPD from the official firmware section from the link you gave me
wanewon said:
this one
https://www.androidfirmwares.net/PhoneKernel/Download/54
this under XWLPD from the official firmware section from the link you gave me
Click to expand...
Click to collapse
yeah thats is the stock kernel.
first try to flash the firmware file which u have extracted
plz delete
ok. I flashed it and the device rebooted. but now its stuck on the boot animation
edit: should I try another firmware thats on the list? also, odin shows epic 4G on top
wanewon said:
ok. I flashed it and the device rebooted. but now its stuck on the boot animation
edit: should I try another firmware thats on the list? also, odin shows epic 4G on top
Click to expand...
Click to collapse
flash the kernel and see now
still no luck. theres so many firmwares on the list too. did I dl the wrong one?
wanewon said:
still no luck. theres so many firmwares on the list too. did I dl the wrong one?
Click to expand...
Click to collapse
may be, try dwnlding a diff firmware and see:good:
check this link below for the same
http://forum.xda-developers.com/showthread.php?t=1544487
ok i will try and report back.
I want to ask though, this issue is fixable right??
I mean being able to get in download is good sign?
wanewon said:
ok i will try and report back.
I want to ask though, this issue is fixable right??
I mean being able to get in download is good sign?
Click to expand...
Click to collapse
dont worry dude as long as ur able to get into dwnld mode ur safe, only thing is to flash the firmware right

[Q] ODIN Complete(Write) Failed

Im running Resurrection Remix 3.0.4 (Lastest) and the 5.66 Dorimanx Kernel.
My problem is when i try and boot into CWM the phone freezes, and when i try and use Odin i get Zimage and then a redbox with the words FAIL appear and Complete(write) failed. Is there a solution in Odin that i can do to change my kernel?
noscentsbrad said:
Im running Resurrection Remix 3.0.4 (Lastest) and the 5.66 Dorimanx Kernel.
My problem is when i try and boot into CWM the phone freezes, and when i try and use Odin i get Zimage and then a redbox with the words FAIL appear and Complete(write) failed. Is there a solution in Odin that i can do to change my kernel?
Click to expand...
Click to collapse
u can try flashing the .tar file of siyah kernel thro Odin and see
Sun90 said:
u can try flashing the .tar file of siyah kernel thro Odin and see
Click to expand...
Click to collapse
I Tried with the latest Siyah the 4.1Rc1 and same thing happened
noscentsbrad said:
I Tried with the latest Siyah the 4.1Rc1 and same thing happened
Click to expand...
Click to collapse
well then u can try this.
1)turn off ur phone.
2)then HOLD Volup+home+pwrbutton simultaneously till u enter recovery.
3)if ur able to enter recovery then from there Wipe cache / dalvik and do fixpermission and then reboot and check
Sun90 said:
well then u can try this.
1)turn off ur phone.
2)then HOLD Volup+home+pwrbutton simultaneously till u enter recovery.
3)if ur able to enter recovery then from there Wipe cache / dalvik and do fixpermission and then reboot and check
Click to expand...
Click to collapse
when i try and enter CWM it freezes?
noscentsbrad said:
when i try and enter CWM it freezes?
Click to expand...
Click to collapse
then the only option left is to flash a official firmware from ODIN and see
Sun90 said:
then the only option left is to flash a official firmware from ODIN and see
Click to expand...
Click to collapse
Do u have a link?
noscentsbrad said:
Do u have a link?
Click to expand...
Click to collapse
visit www.sammobile.com u will get all the firmwares (stock) for ur GT I9100 there
Sun90 said:
visit www.sammobile.com u will get all the firmwares (stock) for ur GT I9100 there
Click to expand...
Click to collapse
will that work tho? my android version is 4.1.1
noscentsbrad said:
will that work tho? my android version is 4.1.1
Click to expand...
Click to collapse
no problem u will have stock ICS firmware installed, then u have to re-root ur phone to install rr jb v3.0.4
as sun90 said u have to flash the stock rom back and then root it again
find ur stock rom here : www.samfirmware.com
or
checkfus downloader (Only downloads the latest roms from the server)
neerajganga said:
as sun90 said u have to flash the stock rom back and then root it again
find ur stock rom here : www.samfirmware.com
or
checkfus downloader (Only downloads the latest roms from the server)
Click to expand...
Click to collapse
so, how do i install via odin? never installed a rom over odin before
noscentsbrad said:
so, how do i install via odin? never installed a rom over odin before
Click to expand...
Click to collapse
yes use odin
download ur stock firmware from samfirmware or checkfus
then start odin (Kill all kies precess before flashing)
the current firmware jus have 1 file so insert it in pda ..
connect ur phone in download mode VOL DWN + HOME + POWER
connect usb
odin shud detect and show a yellow rectangle shwin the port connected
once done and ready hit start and wait for it to finish
Need any help pm me
When I tried flashing my Galaxy S II (using the instructions here http://forum.xda-developers.com/showthread.php?t=1274337 ) I must have done something wrong
When writing, it froze, and now my phone is stuck on the "Firmware upgrade encountered an issue" screen. I tried the emergency recover through KIES, but KIES can't seem to detect the phone. I cant reenter download mode or the recovery mode.
Anyone have any suggestions?
repair Firmware upgrade encountered an issue
Keeyakanze said:
When I tried flashing my Galaxy S II (using the instructions here http://forum.xda-developers.com/showthread.php?t=1274337 ) I must have done something wrong
When writing, it froze, and now my phone is stuck on the "" screen. I tried the emergency recover through KIES, but KIES can't seem to detect the phone. I cant reenter download mode or the recovery mode.
Anyone have any suggestions?
Click to expand...
Click to collapse
open odin again, set up as normal only select pda , enter pda file you tried earlier, switch on the phone, let it boot till the message you get is on screen reconnect the phone to odin and press start, wiat till it says pass and the phone should reboot :good: hope it helps, worked for me

[Tutorial] How to Unbrick/Flash Official Firmware on Samsung Galaxy Ace S5830i Using

How to Unbrick/Flash
Official Firmware on
Samsung Galaxy Ace
S5830i Using Odin
First You Need
Latest Version of ODIN [ TRY TO GOOGLE IT]
Bricked Samsung Galaxy Ace S5830I
USB Cable
YOU CAN DOWNLOAD YOUR COUNTRY FRIMWARE HEAR
http://samsung-updates.com/device/?id=GT-S5830i
Samsung Galaxy Ace S5830i is one
of the most popular and best-selling
low-end Android smartphones with
nice features. The phone was
released with Android 2.2 (Froyo)
and was later upgraded to version
2.3.6 Gingerbread. Modest specs of
the this handset make it unqualified
to be updated to Ice Cream
Sandwich or Jelly Bean but there are
qualified and skilled developers out
there who have successfully, but not
buglessly, developed custom ROMs
and mods to give you some ICS and
JB flavor.
If you have recently tried a custom
ROM and now want to go back to
original Gingerbread ROM, you can
install it manually. Sometimes the
device does not start properly
because it is caught in a bootloop
and you can only see the Samsung
logo with your device name. In such
a situation, installing the official
ROM is the best solution.
Getting Prepared
Download appropriate firmware
file from above and extract the
zip to your desktop computer.
Download Odin3 1.84 tool for
multi-file installation (extract
zip): Odin_with_pit_S5830I.zip
Download Odin3 v3.07 for
single file installation (extract
zip): Odin3-v3.07.zip
Download and install Samsung
USB Drivers on your PC:
Download
Charge your phone and backup
all essential data such as
contacts, messages, apps using
These Free Apps .
Open phone Settings>
Applications> Development
and enable USB Debugging.
Installing Stock Gingerbread
Firmware
Turn off you phone and boot it into
Download mode: hold down
the Volume Down + Volume
Up buttons, then long press
the Power key till the your phone’s
screen turns up and you see the
Download mode screen. Now follow
the steps that applies your case.
Single File Installation:
1. If you are going to do a single
file installation, launch Odin3
v3.07.exe as administrator and
connect the phone to computer
via USB cable.
2. When the device connections is
established successfully the
ID:COM port at Odin 3.07 turns
blue.
3. Click on PDA button and select
the firmware file with .tar.md5
extension.
4. Do not mess with any other
thing in Odin and click the
“Start” button.
Multi-file Installation:
1. In case you choose to install a
multi-file firmware, run Odin3
1.84.exe as administrator and
connect your phone to PC while
it is in Download mode.
2. When the device is connected,
the ID:COM will turn yellow.
3. Make sure that “Re-Partition”,
“Auto Reboot” and “F Reset
Time” options are checked on
Odin.
4. Now click on PIT button and
select the .pit
file: cooperve_0623.pit
5. Then click the PDA button and
select the file with CODE in its
name.
6. Click Phone and select the file
with MODEM in its name.
7. Click on CSC and select the file
with CSC in its name.
8. Finally hit the “Start” button on
Odin and let the installation
finish.
The installation will take just a few
minutes and when it is done your
phone will reboot automatically. The
first boot usually takes longer time
so a little patience is required. When
the phone boots, check the firmware
version from Settings> About on
your Galaxy Ace S5830i. Enjoy the
new firmware. Cheers! :beer:
Sent from my GT-S5830i using xda app-developers app
we already have unbrick tutorial..
any help is appriciated...but please search before u post...
there is already a guide in general section stickies...
Sent from my GT-S5830i using xda app-developers app
Anyway, good tutorial.
Include Odin download links and some screenshots, will make it better.
Sent from my GT-S5830i using xda app-developers app
brijeshep said:
Anyway, good tutorial.
Include Odin download links and some screenshots, will make it better.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
Had a bricked bootlooped s5830i laying somewhere, it is fixed now! thanks!
Cant unbrick
Hi, I'm a newbie. When i finally unbrick, phone again restart stock logo SAMSUNG and again restart fix? pls ((
FirsThink2000 said:
Hi, I'm a newbie. When i finally unbrick, phone again restart stock logo SAMSUNG and again restart fix? pls ((
Click to expand...
Click to collapse
Go to stock recovery and do wipe data/cache and then again flash stock rom via odin it will start...
Sent from my Ace-i
Hitesh2626 said:
Go to stock recovery and do wipe data/cache and then again flash stock rom via odin it will start...
Sent from my Ace-i
Click to expand...
Click to collapse
Hi! I was try it, and its works!!! TNX A LOT!!!!
FirsThink2000 said:
Hi! I was try it, and its works!!! TNX A LOT!!!!
Click to expand...
Click to collapse
Don't just say thanks, hit his thanks button! :silly:
odin3 1.84 stuck at <ID:0/005>setupconnection...
not working
It still isn't working .i had tried single firmware and my phone is still bootlooping!!
Flash013 said:
It still isn't working .i had tried single firmware and my phone is still bootlooping!!
Click to expand...
Click to collapse
If you flashed firmware then enter stock recovery wipe data cache.
:: Freedom... ::
ChelebiTech said:
If you flashed firmware then enter stock recovery wipe data cache.
:: Freedom... ::
Click to expand...
Click to collapse
I already did that ...it didn't help!
hello,
my galaxy ace is from ksa region can I flash india region firmware does it work r not
it will help me a lot plz do reply me fast
aakifnouman said:
hello,
my galaxy ace is from ksa region can I flash india region firmware does it work r not
it will help me a lot plz do reply me fast
Click to expand...
Click to collapse
Yes it will work
Sent from my GT-S5830i using xda app-developers app
Hitesh2626 said:
Yes it will work
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
thank you...... u saved my time
well I don't know more about Samsung devices so one more doubt
are there any chances to install custom kernels in s5830 and s5830i
if yes then how to flash
is the procedure is like sony devices or different on unlocking the bootloader
aakifnouman said:
thank you...... u saved my time
well I don't know more about Samsung devices so one more doubt
are there any chances to install custom kernels in s5830 and s5830i
if yes then how to flash
is the procedure is like sony devices or different on unlocking the bootloader
Click to expand...
Click to collapse
Yes their are some Kernels for both model ,for flashing them just the steps are given in there Original posts they are simple just need to flash them via CWM
Sent from my GT-S5830i using xda app-developers app
Help me
I try to do what you said above, but Odin has to step it
<ID:0/004> NAND Write Start!
<ID:0/004> BcmCP.img
<ID:0/004> boot.img
<ID:0/004> system.img
I attached a picture to see more precisely. What should I do not get any phone in recovery mode (Power On + Volume Up + Home).
HELP ME.
Works great. +1
hey man,
im a newbie here, can you help me unbrick my galaxy ace s5830i , ived looked at several how to tutorials but im just haveing a problem on finding an australian stock rom for my phone! , please help , it would be a pleasure
Please help!
Hi guys,
I'm a newbie, and I decided to root my phone yesterday. Once it was rooted successfully, i tried flashing a couple of ROMS (Ace of spades & Slimbean) and both didn't work because of an rror in the file. I then downloaded Razodroid 2.5, and insatlled it (after installing CWM 5), it said installation complete and i tried to reboot my phone, but its stuck on the logo screen. I've looked at so many different tutorials to unbrick it, downloaded all the different setups needed, but the problem is that it just won't go into recovery.
If i press down all the buttons, the logo comes on once, and then just stays blank for as long as i hold the buttons down, and if i let go of the buttons the logo comes up again and stays there.
I tried doing it through ODIN, but if it won't go in to recovery mode how do i get it to work? It doesn't even connect to the computer.
Please help me, I am really upset and frustrated by this, and no longer have a phone. I am at my wits end. Please tell me how to fix this.

[Q] why my samsung wont turn on after update superuser ?

Hi, I danny, I have problem with samsung galaxy s2, after I update android to 4.1.2 jelly bean, problem that when update once with superuser in clockworkmod, my phone wont turn on, only out samsung galaxy s2 logo. please help me, thank you.
Boot into recovery, factory reset. No recovery ? Flash stock rom with Odin. How ? Thread stickied near the top of Q&A has the information you need.
DANNY_DANIEL said:
Hi, I danny, I have problem with samsung galaxy s2, after I update android to 4.1.2 jelly bean, problem that when update once with superuser in clockworkmod, my phone wont turn on, only out samsung galaxy s2 logo. please help me, thank you.
Click to expand...
Click to collapse
Which variant of S2 do you have? What did you flashed for superuser? You probably flashed the wrong file, flash stock again in odin or restore if you have a nandroid backup, then find whatever you need to flash properly, we can help you if you give us more information.
Dakura said:
Which variant of S2 do you have? What did you flashed for superuser? You probably flashed the wrong file, flash stock again in odin or restore if you have a nandroid backup, then find whatever you need to flash properly, we can help you if you give us more information.
Click to expand...
Click to collapse
before this I use android 4.1.2 jelly bean official, I change to BiftorRom V10 JB XWLSW no wipe, I777UCMD8_modem, and jeboo_kernel_i777_v2-2_CWM in sdcard. after that, I exchange to revolutionROm, I follow all in youtube : After all okay, superuser order me update in CWM, when I press "CWM" telephone started restart and attached in "Samsung Galaxy SII GT_i9100" I try kill power and switch on back, it same. Please help me,
SORRY FOR BAD ENGLISH
MistahBungle said:
Boot into recovery, factory reset. No recovery ? Flash stock rom with Odin. How ? Thread stickied near the top of Q&A has the information you need.
Click to expand...
Click to collapse
i try to open recovery to factory/delete all data but it won't open. just out image logo "Samsung Galaxy SII GT-i9100"
DANNY_DANIEL said:
before this I use android 4.1.2 jelly bean official, I change to BiftorRom V10 JB XWLSW no wipe, I777UCMD8_modem, and jeboo_kernel_i777_v2-2_CWM in sdcard. after that, I exchange to revolutionROm, I follow all in youtube : After all okay, superuser order me update in CWM, when I press "CWM" telephone started restart and attached in "Samsung Galaxy SII GT_i9100" I try kill power and switch on back, it same. Please help me,
SORRY FOR BAD ENGLISH
Click to expand...
Click to collapse
Can you go to recovery? (volume up+home+power) If you can, simply wipe data and cache, and see if it works out.
Dakura said:
Can you go to recovery? (volume up+home+power) If you can, simply wipe data and cache, and see if it works out.
Click to expand...
Click to collapse
i try to open recovery to factory/delete all data but it won't open. just out image logo "Samsung Galaxy SII GT-i9100" and stalk.
DANNY_DANIEL said:
i try to open recovery to factory/delete all data but it won't open. just out image logo "Samsung Galaxy SII GT-i9100" and stalk.
Click to expand...
Click to collapse
Can you go to download mode? (press down+ home+ power) when the phone opens, stop pressing the power button but keep pressing other buttons. If you can go to download mode, flash your stock firmware again via odin ( you can download your stock firmware from samfirmware.com) , if you get bootloop after that, go to recovery and delete data and cache.
Dakura said:
Can you go to download mode? (press down+ home+ power) when the phone opens, stop pressing the power button but keep pressing other buttons. If you can go to download mode, flash your stock firmware again via odin ( you can download your stock firmware from samfirmware.com) , if you get bootloop after that, go to recovery and delete data and cache.
Click to expand...
Click to collapse
yes can. give me 12 hours for try this. thanks for help! :good:
Dakura said:
Can you go to download mode? (press down+ home+ power) when the phone opens, stop pressing the power button but keep pressing other buttons. If you can go to download mode, flash your stock firmware again via odin ( you can download your stock firmware from samfirmware.com) , if you get bootloop after that, go to recovery and delete data and cache.
Click to expand...
Click to collapse
Hi Dakura, I try to include another android official 4.1.2 in ODIN. When i click start, it FAIL. I try again, but it same. And i try to use a new RECOVERY file, It same. FAIL. Please help me. thanks.
DANNY_DANIEL said:
Hi Dakura, I try to include another android official 4.1.2 in ODIN. When i click start, it FAIL. I try again, but it same. And i try to use a new RECOVERY file, It same. FAIL. Please help me. thanks.
Click to expand...
Click to collapse
Are u sure u are doing everthing correctly? You need to download stock from your region, check if you stock firmware is correct, you can search your development forums for stock firmware mirrors or you can download from samfirmware.com , you need to put it on PDA, and then just flash.
DANNY_DANIEL said:
before this I use android 4.1.2 jelly bean official, I change to BiftorRom V10 JB XWLSW no wipe, I777UCMD8_modem, and jeboo_kernel_i777_v2-2_CWM in sdcard. after that, I exchange to revolutionROm, I follow all in youtube : After all okay, superuser order me update in CWM, when I press "CWM" telephone started restart and attached in "Samsung Galaxy SII GT_i9100" I try kill power and switch on back, it same. Please help me,
SORRY FOR BAD ENGLISH
Click to expand...
Click to collapse
I Had this problem too at the past when update superSU.. If u face to update SuperSU again..Try update superSu with normal mode..
Sent from my GT-I9100 using Xparent Purple Tapatalk 2
dinoredfield said:
I Had this problem too at the past when update superSU.. If u face to update SuperSU again..Try update superSu with normal mode..
Sent from my GT-I9100 using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Before i update SuperSU, My WeChat Can't open moment, i know it problem in WeChat apps. Btw my SdCard not detect. And my gallery can't open and show the text "Not enough space. Delete unnecessary items such as ... pictures, videos..." that why i exchange to revolutionROm. It like Samsung note 3/Galaxy s4. Then SuperSU command update a SuperSU in CWM and i have a problem. -_- . now my phone back to normal, just gallery can't open. I remove the SdCard. it same.
As the message said, delete unnecessary items, if that doesn't work, format sd card (internal and external both) and if that doesn't work, use nuke script, re-install rom.

Can't find stock firmware HELP

Hi guys my s3 is on some rom,and its REALLY SLOW and Buggy so i wanted to go back to stock rom but i dont know which one to install can someone help pls ??
If you have the international variant (btu) i can link you to the mk6 rom.
Beamed in by telepathy.
shivadow said:
If you have the international variant (btu) i can link you to the mk6 rom.
Beamed in by telepathy.
Click to expand...
Click to collapse
um,i did wanted to install stock recovery and it failed and my phone wont turn on it says i need to use the kies. And i tried and now it does not work.uhhhhhhhhhhhh
Damn my english sucks when i'm angry
kefi999 said:
um,i did wanted to install stock recovery and it failed and my phone wont turn on it says i need to use the kies. And i tried and now it does not work.uhhhhhhhhhhhh
Click to expand...
Click to collapse
Download stock rom from sammobile.com. Don't worry you can flash it via odin. Pull the battery, wait for a minute. Now insert the battery & boot to download mode(Hold press volume down +Home+ Power key). Now flash the stock rom via odin .
If the phone stays at the screen that says the firmware enountered an error, don't worry. Open Odin, connect the phone, and flash the firmware.

Categories

Resources