Hi.
So basically I think my Galaxy S3 i9300 is bricked .When I turn it on it goes into download mode.I want to flash a ROM on it but have trouble finding the proper one.Can someone give me links to a ROM which has .pit,csc and modem files?
please point me in the right direction.Thanks
Depends on yre choice , stock or custom
I want links to a stock ROM please.
Sammobile is your best bet. It has almost all stock firmwares for all Samsung phones.
However , the download speed is limited to around 50kb/s for free users
SAMMobile only gives the .md5 file. I need a ROM with all the files I listed.
Try here : http://samsung-updates.com/device/?id=GT-I9300
The region codes are listed here : http://forum.xda-developers.com/galaxy-s3/general/csc-codes-t2090739
Note: you don't allways need to use all the files, in most of the cases csc and pda is enough
hacker804 said:
Hi.
So basically I think my Galaxy S3 i9300 is bricked .When I turn it on it goes into download mode.I want to flash a ROM on it but have trouble finding the proper one.Can someone give me links to a ROM which has .pit,csc and modem files?
please point me in the right direction.Thanks
Click to expand...
Click to collapse
When I had same issue on gti9300 I flashed my recovery tar file with Odin again and enabled me to boot into recovery with power vol- up home keys.
kush2.0 said:
When I had same issue on gti9300 I flashed my recovery tar file with Odin again and enabled me to boot into recovery with power vol- up home keys.
Click to expand...
Click to collapse
Yes I can boot into recovery it says that cannot mount system .
Can you tell me what to do after that?
I need the .pit file
Related
hello
i rooted the phone and installed recovery , downloaded custom rom and placed it by mistake on the EXTERNAL SD instead of the internal , and i formatted the OS (without making a backup) , and then i found out that CWM doesn't support external SD on the GS2 .. so now i'm stuck without a OS..
i googled a lot and i found only 1 topic about the same problem , and the solution there was to flash stock using odin , so i looked for the stock rom that i had (Pelephone Israel) and i'm downloading it, and its taking like forever to be completed ..
my question (which i couldn't find an answer to anywhere) whats the difference between flashing a rom via CMW and Odin ? can i just flash it from Odin instead of waiting another hour or 2 till the download is done and then flash it , reroot and flash recovery then flash custom rom ?
another question, when flashing a custom rom vua CWM , does it change the kernel ? (while Odin doesn't ?)
i'm a little confused here and i would appreciate any help (by the way the GS2 is my fiend's and its the first time i try flashing one)
Flashing via odin: You can only use tar files, and it boosts your custom binary count.
Flashing via CWM: It uses zip files, which is the most popular format for most roms. And it doesn't boot your custom binary counter. It's also harder to mess up flashing.
Pretty sure that's right. Just use CWM.
Edit: CWM only changes the kernel if the kernel is within the rom's zip.
Sent from my GT-I9100 using XDA
thanks for the fast reply
do you confirm that flashing stock via Odin will solve my problem ? any worries of a brick there doing that?
what happens if i flash (via Odin) a firmware that uses a different kirnel from the 1 installed?
thanks again
as long as u're following the instructions right i'm sure you'll be fine..
if you are flashing via odin, PDA file is the ROM which usually includes a kernel.
Twiq said:
as long as u're following the instructions right i'm sure you'll be fine..
if you are flashing via odin, PDA file is the ROM which usually includes a kernel.
Click to expand...
Click to collapse
the thing is that there are no instructions .. someone told the OP to flash original firmware via Odin and thats all .. i couldn't find any information anywhere thats why i got confused and i'm asking here ..
what i'm downloading is the exact original firmware i had before .. i have CWM installed but apparently its useless in my case , and i can enter download mode ..
what i'm planning to do is flash the firmware i'm downloading via Odin (its either 1 PDA file or 3 different files , thats not the case here ..) , and all i need is a confirmation that i'm safe ..
thanks
bobo122 said:
the thing is that there are no instructions .. someone told the OP to flash original firmware via Odin and thats all .. i couldn't find any information anywhere thats why i got confused and i'm asking here ..
what i'm downloading is the exact original firmware i had before .. i have CWM installed but apparently its useless in my case , and i can enter download mode ..
what i'm planning to do is flash the firmware i'm downloading via Odin (its either 1 PDA file or 3 different files , thats not the case here ..) , and all i need is a confirmation that i'm safe ..
thanks
Click to expand...
Click to collapse
You're safe. Just be sure to flash the right files
Sent from my GT-I9100 using XDA
i'm up and running again .. thanks guys
bobo122 said:
the thing is that there are no instructions .. someone told the OP to flash original firmware via Odin and thats all .. i couldn't find any information anywhere thats why i got confused and i'm asking here ..
what i'm downloading is the exact original firmware i had before .. i have CWM installed but apparently its useless in my case , and i can enter download mode ..
what i'm planning to do is flash the firmware i'm downloading via Odin (its either 1 PDA file or 3 different files , thats not the case here ..) , and all i need is a confirmation that i'm safe ..
thanks
Click to expand...
Click to collapse
You can safely update the official firmware using odin and you won't bork anything by that method. I hope you have enabled the USB debugging mode in your mobile or else odin might not recognize the phone.
Need help.
I did a factory reset through the rom and now its blank after the boot screen
I was able to boot into a download mode I think where I hold vol down, home and power.
it says a custom OS can cause critical problems in phone and installed apps
if you want to download a custom OS, press the vol up key, otherwise press vol down
I pressed vol up and
It says its on Odin mode
custom binary download: NO
current binary: samsung official
Downloading...
Do not turn off target!!!
what do I do?? help
wanewon said:
Need help.
I did a factory reset through the rom and now its blank after the boot screen
I was able to boot into a download mode I think where I hold vol down, home and power.
it says a custom OS can cause critical problems in phone and installed apps
if you want to download a custom OS, press the vol up key, otherwise press vol down
I pressed vol up and
It says its on Odin mode
custom binary download: NO
current binary: samsung official
Downloading...
Do not turn off target!!!
what do I do?? help
Click to expand...
Click to collapse
well would suggest u to reflash ur stock firmware once again from Odin
Sun90 said:
well would suggest u to reflash ur stock firmware once again from Odin
Click to expand...
Click to collapse
yes I was wishing that I could do that but I have no idea how..
a little step by step instruction would be much appreciated !!!
wanewon said:
yes I was wishing that I could do that but I have no idea how..
a little step by step instruction would be much appreciated !!!
Click to expand...
Click to collapse
check the link below for the same
http://forum.xda-developers.com/showthread.php?t=1075278
thanks. quick question.
My device is rooted, do i need to unroot to do it? and after I flashed the stock firmware. would my device still be rooted (if unrooting is not needed)
wanewon said:
thanks. quick question.
My device is rooted, do i need to unroot to do it? and after I flashed the stock firmware. would my device still be rooted (if unrooting is not needed)
Click to expand...
Click to collapse
no need to unroot ma8, since flashing stock firmware will automatically unroot ur phone, after that if u need root then u can always do so
ps- ensure that u dwnld the proper firmware meant for ur device(if its I9100 then the one corresponding to it) and follow the ODIN instruction carefully for a successfull flash
1). Download official firmware for your device from samobile.com , Google and download Odin .
2) Extract the zip downloaded from samobile . It will be a .tar or .tar.md5 file.
3) Boot into Odin mode like u did earlier
4) Run Odin and connect your device . Odin will detect and will show the port number.
5) In PDA ,select the extracted file.
Don't change any other option .
6) Press Start
Odin will flash the binary . Wait till process is complete. On completion it shows pass.
Your phone will boot automatically.
Sent from my GT-I9100G using xda app-developers app
yeah, its i9100
is this firmware correct?
https://androidfirmwares.net/PhoneFirmware/Download/118
wanewon said:
yeah, its i9100
is this firmware correct?
https://androidfirmwares.net/PhoneFirmware/Download/118
Click to expand...
Click to collapse
yes, its the one
Sun90 said:
yes, its the one
Click to expand...
Click to collapse
thanks. Im about to proceed with it. also do I need to flash the kernel too? I downloaded the kernel file too which extracted into tar.md5 file.
thanks again
wanewon said:
thanks. Im about to proceed with it. also do I need to flash the kernel too? I downloaded the kernel file too which extracted into tar.md5 file.
thanks again
Click to expand...
Click to collapse
which kernel file?
Sun90 said:
which kernel file?
Click to expand...
Click to collapse
this one
https://www.androidfirmwares.net/PhoneKernel/Download/54
this under XWLPD from the official firmware section from the link you gave me
wanewon said:
this one
https://www.androidfirmwares.net/PhoneKernel/Download/54
this under XWLPD from the official firmware section from the link you gave me
Click to expand...
Click to collapse
yeah thats is the stock kernel.
first try to flash the firmware file which u have extracted
plz delete
ok. I flashed it and the device rebooted. but now its stuck on the boot animation
edit: should I try another firmware thats on the list? also, odin shows epic 4G on top
wanewon said:
ok. I flashed it and the device rebooted. but now its stuck on the boot animation
edit: should I try another firmware thats on the list? also, odin shows epic 4G on top
Click to expand...
Click to collapse
flash the kernel and see now
still no luck. theres so many firmwares on the list too. did I dl the wrong one?
wanewon said:
still no luck. theres so many firmwares on the list too. did I dl the wrong one?
Click to expand...
Click to collapse
may be, try dwnlding a diff firmware and see:good:
check this link below for the same
http://forum.xda-developers.com/showthread.php?t=1544487
ok i will try and report back.
I want to ask though, this issue is fixable right??
I mean being able to get in download is good sign?
wanewon said:
ok i will try and report back.
I want to ask though, this issue is fixable right??
I mean being able to get in download is good sign?
Click to expand...
Click to collapse
dont worry dude as long as ur able to get into dwnld mode ur safe, only thing is to flash the firmware right
I am a newbie from Nepal. I dont have much knowledge of flashing. A week ago i tried to flash CMW recover while i was in resurrection remix JB rom. Till then i am not able to start my phone because it freezes at "Samsung Galaxy S2" logo... Now i dont know the CSC, PDA and kernel version of my mobile. So please help me solve my problem, how can i make it work?
Boot into recovery (Turn phone off. Then hold home/power/volume up) & do a wipe/factory reset. Or if you have a recent backup (or any backup) restore that from recovery. I've done this a couple of times over the past few mths when my phone has spontaneously bootlooped.
didnt help
MistahBungle said:
Boot into recovery (Turn phone off. Then hold home/power/volume up) & do a wipe/factory reset. Or if you have a recent backup (or any backup) restore that from recovery. I've done this a couple of times over the past few mths when my phone has spontaneously bootlooped.
Click to expand...
Click to collapse
I can boot into CWM recovery but the wipe/factory reset and cache deletion too would not help.. I dont have any backup and i am not able to access my external sd card too... so please can you help me now...
Boot into download mode (Phone off. Home, power, volume down) & flash a stock rom in Odin; go to Samfirmware or AndroidFirmwares.net & get a stock rom (or get the PC version of Checkfus). Flashing instructions here
help me again
MistahBungle said:
Boot into download mode (Phone off. Home, power, volume down) & flash a stock rom in Odin; go to Samfirmware or AndroidFirmwares.net & get a stock rom (or get the PC version of Checkfus). Flashing instructions here
Click to expand...
Click to collapse
Now i dont know PDA, PHONE and CSC of my SGS2, So how can i select the particular rom for my SGS2.. Please let me know.....
Flash an old rom on your sd card maybe?
Sent From My Rooted Samsung Galaxy S2 JB 4.1.2 (GT-I9100)
Dannyvld said:
Flash an old rom on your sd card maybe?
Sent From My Rooted Samsung Galaxy S2 JB 4.1.2 (GT-I9100)
Click to expand...
Click to collapse
Sorry i cant access my external sd card in CWM recovery and i dont know how to access internal memory of my phone since it can only boot into recovery and download mode...
In that case flash any stock rom you like. I gather you'll be going back to a custom rom pretty quickly in any case (?) so it doesn't matter. Whatever you do tho, do not flash a PIT.
liveondead said:
Now i dont know PDA, PHONE and CSC of my SGS2, So how can i select the particular rom for my SGS2.. Please let me know.....
Click to expand...
Click to collapse
MistahBungle said:
In that case flash any stock rom you like. I gather you'll be going back to a custom rom pretty quickly in any case (?) so it doesn't matter. Whatever you do tho, do not flash a PIT.
Click to expand...
Click to collapse
All I can do is download a rom which is in zip format, but i know odin does not support .zip but it supports .tar, so how can i download rom in .tar, also does it matter if I flashed the rom which is not meant for my region?(I mean I dont know my phone's PDA and I am not able to decide which firmware to download since every firmware has its own specific PDA)... Yes, I'll be going back again to custom rom after I make it work...haha
AFAIK a rom for another country wont break your phone, but be careful with 4.0.4 roms because of the brickbug
liveondead said:
All I can do is download a rom which is in zip format, but i know odin does not support .zip but it supports .tar, so how can i download rom in .tar, also does it matter if I flashed the rom which is not meant for my region?(I mean I dont know my phone's PDA and I am not able to decide which firmware to download since every firmware has its own specific PDA)... Yes, I'll be going back again to custom rom after I make it work...haha
Click to expand...
Click to collapse
go to http://www.sammobile.com/firmware/?page=3 and choose the stock or even another stock rom you wish, download it.
Boot into download mode and flash the single .tar file through odin, flashing instructions can be found here: http://forum.xda-developers.com/showthread.php?t=1075278
PD: if the downloaded file is .zip and not .tar, just extract the zip and u'll get the .tar
Delta25 said:
AFAIK a rom for another country wont break your phone, but be careful with 4.0.4 roms because of the brickbug
Click to expand...
Click to collapse
Amm, now i have a android 4.0.4 firmware in odin supported format.. and i am about to flash using odin.. but i got confused what did you mean by "but be careful with 4.0.4 roms because of the brickbug".. Please explain me... And thankx in advance..
He means don't do a wipe/factory reset from recovery while you're running that kernel. Once you switch to a custom kernel you can relax tho.
MistahBungle said:
He means don't do a wipe/factory reset from recovery while you're running that kernel. Once you switch to a custom kernel you can relax tho.
Click to expand...
Click to collapse
Oh god, I am so confused. When I selected my PDA in the odin interface and I clicked start, it says "The Parameter is incorrect".. What can I do now???
MistahBungle said:
He means don't do a wipe/factory reset from recovery while you're running that kernel. Once you switch to a custom kernel you can relax tho.
Click to expand...
Click to collapse
Please help, when i tried to flash android 4.0.4, odin says "The Parameter is Incorrect"...
liveondead said:
Please help, when i tried to flash android 4.0.4, odin says "The Parameter is Incorrect"...
Click to expand...
Click to collapse
Parameter is incorrect error can be caused by either of two reasons
1 . something is wrong with the file you downloaded try re downloading
2.Kies is interfering with Odin, terminate Kies from the background by using the task manager.
Using GT - I9100
Just hit the damn help button if I helped you.
A lot of Thankx..
I wanna thank all of the members of the forum who have helped me in fixing my mobile. I finally fixed it by flashing the stock rom android 4.0.3, and it is doing perfect but laggs sometimes....:good:
Glad you got it sorted
liveondead said:
I wanna thank all of the members of the forum who have helped me in fixing my mobile. I finally fixed it by flashing the stock rom android 4.0.3, and it is doing perfect but laggs sometimes....:good:
Click to expand...
Click to collapse
When my phone bricked i went to the store, they set the official software over my rooted one, i had very much lag, just flash a good rom and its over.
Sent From My Rooted Samsung Galaxy S2 JB 4.1.2 (GT-I9100)
Hi
sorry for my bad english
a few days ago i did an update via odin.i mean i want to change firmware to another stock rom to test battery life and something else but my mistake is that i used PIT file.that erase every thing and after that S3 freeze at boot logo ,very lagy and restart by itself.
i searched internet and unfourtunately i found my s3 bricked
but now its ok and the solution is ever u used PIT(partition information table)u must flash files that ur s3 need.
=================================================
1-u must use correct version of samsung galaxy s3(i9300) = Odin3 v3.04
2-go to download mode by presing volume down + menu + power and then select wolume up
3-flash pit file with odin .phone will restart and then enter download mode by step 2 again then go to step 4 (this isnt necessary more)
4-if u want flash desired stock rom do this by PDA button
5-if u do step 4 then restart or not flash PARAM.bin by PHONE button via odin
thats the point , param.bin is the solution for s3
its worked for my dead galaxy s3 gt-i9300 and i thought that bricked
=======================
extract files and uses them
i extracted param.bin from a stock korean firmware
hope it will help who search for solution :victory:
Good but Really works ??
hi
i think this can help if use PIT file.i test without using PIT file and no problem happens.
if phone is slow and laggy and restart with no reason i think its good to test this solution.however this file available in boot loader and main firmware file but flash it instead of those can help
when u flash .pit or .param do you need to enable Re-partition on Odin?
murphy0 said:
when u flash .pit or .param do you need to enable Re-partition on Odin?
Click to expand...
Click to collapse
Should be pit yes param no. Though param is the 4th partition on the mmc.
Not working 4 me.....
Flashed pit, reboot to DL-Mode, Flashed ROM -> Blue Bootanimation Loop
z0mg.jer1Cho said:
Not working 4 me.....
Flashed pit, reboot to DL-Mode, Flashed ROM -> Blue Bootanimation Loop
Click to expand...
Click to collapse
try over recovery mode and wipe data and cache
mostafaz said:
try over recovery mode and wipe data and cache
Click to expand...
Click to collapse
haven't counted, but tried this a lot of times :/
Never the Less, sent my Phone to Service Center (with Flashcounter 14, thank god im living in Germany )
mostafaz said:
Hi
sorry for my bad english
a few days ago i did an update via odin.i mean i want to change firmware to another stock rom to test battery life and something else but my mistake is that i used PIT file.that erase every thing and after that S3 freeze at boot logo ,very lagy and restart by itself.
i searched internet and unfourtunately i found my s3 bricked
but now its ok and the solution is ever u used PIT(partition information table)u must flash files that ur s3 need.
=================================================
1-u must use correct version of samsung galaxy s3(i9300) = Odin3 v3.04
2-go to download mode by presing volume down + menu + power and then select wolume up
3-flash pit file with odin .phone will restart and then enter download mode by step 2 again then go to step 4 (this isnt necessary more)
4-if u want flash desired stock rom do this by PDA button
5-if u do step 4 then restart or not flash PARAM.bin by PHONE button via odin
thats the point , param.bin is the solution for s3
its worked for my dead galaxy s3 gt-i9300 and i thought that bricked
=======================
extract files and uses them
i extracted param.bin from a stock korean firmware
hope it will help who search for solution :victory:
Click to expand...
Click to collapse
is that for galaxy s3 i9300 16 gb internacional europe ?
---------- Post added at 01:04 AM ---------- Previous post was at 01:01 AM ----------
mostafaz said:
Hi
sorry for my bad english
a few days ago i did an update via odin.i mean i want to change firmware to another stock rom to test battery life and something else but my mistake is that i used PIT file.that erase every thing and after that S3 freeze at boot logo ,very lagy and restart by itself.
i searched internet and unfourtunately i found my s3 bricked
but now its ok and the solution is ever u used PIT(partition information table)u must flash files that ur s3 need.
=================================================
1-u must use correct version of samsung galaxy s3(i9300) = Odin3 v3.04
2-go to download mode by presing volume down + menu + power and then select wolume up
3-flash pit file with odin .phone will restart and then enter download mode by step 2 again then go to step 4 (this isnt necessary more)
4-if u want flash desired stock rom do this by PDA button
5-if u do step 4 then restart or not flash PARAM.bin by PHONE button via odin
thats the point , param.bin is the solution for s3
its worked for my dead galaxy s3 gt-i9300 and i thought that bricked
=======================
extract files and uses them
i extracted param.bin from a stock korean firmware
hope it will help who search for solution :victory:
Click to expand...
Click to collapse
is that for galaxy s3 i9300 16 gb internacional europe ?
hi
yes gt-i9300
international
PIT file
mostafaz said:
hi
yes gt-i9300
international
Click to expand...
Click to collapse
hello,I had initially no WIFI, then a few days later brick.
Hopefully boot always correct and I could flash some original ROM.
But doing so the IMEI and other where lost (while files are written in the EFS partition-directory
My 9300 INT (Europe-France) works but limited to Wifi. 4.1.2 version with EMG4 (recent 2013 july) the 9300 date sept 2012
The EFS was probably overriden
I flashed different ROMS and could not have it back, but I did not try to use PIT rebuilding.
I am actually with an EMG4 modem - so I just wonder
Is the param.bin a descriptive file fro PIT ?
If not what kind of PIT file may I use ? is it included in a part of the ROM files ?
If I put the complete rom file in the PIT window of ODIN, will ODIN use only PIT? or will it FLASH the complete ROM + PIT.
SOrry to be new to this, I can understand shell, ADB, busybox, root etc, but the way the flashing is mounting files and partitioopns escapes me.
Thank you in advance if someone can give me a hand.
Regards
PS I had seen almost 100 pages of different methods and no real TUTO when no backup is find (I may have one at some point but on another SD...
So I know no miracle exist, out of specific equipment. , box, ...
Sorry for the 10001 quetion about the same troublewith IEMI/EFS
Help
there is no PIT partition here
i can't understand if i need to flash param or not. if its not needed then why download it ?
i can't connect to wifi and can't use dialer, does above method solve my problem ?
Hi guys,
my friend accidentally bricked his phone while he was trying to install a new ROM.
It is a Galaxy S4 and he accidentally deleted everything, whice means there is no system and no recovery.
What can I do?
Appreciate any help.
Thanks in advance!
Go Into Download Mode (vol+ and power button i think) and Flash new Rom with Odin
Sent Form A1001 One Plus One Using Tapatalk on CM14 <3
KrYptoNxXx said:
Go Into Download Mode (vol+ and power button i think) and Flash new Rom with Odin
Sent Form A1001 One Plus One Using Tapatalk on CM14 <3
Click to expand...
Click to collapse
I tried it but i am getting an error in Odin.. doesn't Odin need a recovery like TWRP or something to install a ROM?
Adi_vizgan said:
I tried it but i am getting an error in Odin.. doesn't Odin need a recovery like TWRP or something to install a ROM?
Click to expand...
Click to collapse
Odin can work independently in download mode
were you able to go into download mode?
rajat224 said:
Odin can work independently in download mode
were you able to go into download mode?
Click to expand...
Click to collapse
How can I install a ROM from Odin? the ROM is a zip file and Odin doesn't let me choose zip files.
Adi_vizgan said:
How can I install a ROM from Odin? the ROM is a zip file and Odin doesn't let me choose zip files.
Click to expand...
Click to collapse
Odin is for flashing the original firmware from Samsung. You should be able to find it here in the forum for your phone. They usually will post it either in the General or Development sub-forums. If you can't find the exact one you need, then you can check out sammobile.com, though it is usually a pretty slow download. You must use the one for your variant of S4 and can be specific to your carrier or region, depending on which S4 you have. You should only use the same firmware or newer.
odin for samsung
i will recommend try flashing a custom recovery like twrp or philz for flashing a custom rom
flash recovery image using odin or any adb boot type commands
also be device specific when u search for rooting or flashing roms to avoid bricking of the device