Hi.....
I am having my XT910 [Asia Version] currently ruuning on UK official JB ROM [System Version 982.124.14.XT910.Retail.en.EU].
Everything was working fine.
Last Week, My mobile battery completely drained out switching off the system directly.
When I restarted my mobile, I am unable to connect to internet.
I got the apn settings changed by Mobile Company but the net is still not working.
The Net is working when the sim card is used in other mobile
I formatted my mobile & installed UK official JB ROM again [System Version 982.124.14.XT910.Retail.en.EU] by using AP fastboot but the 3G is still not working.
Does Anybody knows the solution ??? I also wanted to know whether formatting the CID file will help.
..... anybody plz help !!! :crying:
I even running same .EU ota on Asian xt910 and i have never got this problem .
Ok as ya saying ya have tried all the possible methods and none of them seemed to be working then try flashing baseband , i hope that would work or else try to change ya sim card and else what happnes
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
anurag.dj2u said:
I even running same .EU ota on Asian xt910 and i have never got this problem .
Ok as ya saying ya have tried all the possible methods and none of them seemed to be working then try flashing baseband , i hope that would work or else try to change ya sim card and else what happnes
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
Click to expand...
Click to collapse
I cannt connect to the 3G service on CM 10 rom
do you have any baseband for XT910. I need it for CM10 rom.
teen9xpro said:
I cannt connect to the 3G service on CM 10 rom
do you have any baseband for XT910. I need it for CM10 rom.
Click to expand...
Click to collapse
According to me I've seen so many users having the same problem on cm10 . As far as i know cm10 is not fully integrated and still in beta stage with some bugs so i would like to recommend ya use liquid smooth or any other fully working custom ROM
Edit : look out into the development section for roms and try i hope it would work .
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
anurag.dj2u said:
According to me I've seen so many users having the same problem on cm10 . As far as i know cm10 is not fully integrated and still in beta stage with some bugs so i would like to recommend ya use liquid smooth or any other fully working custom ROM
Edit : look out into the development section for roms and try i hope it would work .
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
Click to expand...
Click to collapse
I also try liquid smooth too,
if I use android 4.1.2 like Rage Rom v3.2 *STABLE*, 3G work perfect. however, with 4.2.2, it cant connect
Then please use 4.1.2 instead of 4.2 because official 4.2 has not yet been released and the developers might developed it from other sources like taken from galaxy s4 or nexus so kindly wait till the official released and use 4.1.2
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
teen9xpro said:
I also try liquid smooth too,
if I use android 4.1.2 like Rage Rom v3.2 *STABLE*, 3G work perfect. however, with 4.2.2, it cant connect
Click to expand...
Click to collapse
Thats because most of the 4.1.2 ROMs are based on stock ROM(and kernel) and the 4.2.2 ones are from AOSP/AOKP(kexec kernel).
search in the dev section for baseband
Sent from my DROID RAZR using Tapatalk 2
neo.ank said:
Thats because most of the 4.1.2 ROMs are based on stock ROM(and kernel) and the 4.2.2 ones are from AOSP/AOKP(kexec kernel).
search in the dev section for baseband
Sent from my DROID RAZR using Tapatalk 2
Click to expand...
Click to collapse
I has looking for baseband before. However I don't know clearly about baseband so that I cant find it.
Can you help me?
sb can help me find the right baseband
teen9xpro said:
I has looking for baseband before. However I don't know clearly about baseband so that I cant find it.
Can you help me?
Click to expand...
Click to collapse
I'll look for the threads and post it.
Sent from my DROID RAZR using Tapatalk 2
neo.ank said:
I'll look for the threads and post it.
Sent from my DROID RAZR using Tapatalk 2
Click to expand...
Click to collapse
thank for you help :highfive:
abhijeet834u said:
Hi.....
I am having my XT910 [Asia Version] currently ruuning on UK official JB ROM [System Version 982.124.14.XT910.Retail.en.EU].
Everything was working fine.
Last Week, My mobile battery completely drained out switching off the system directly.
When I restarted my mobile, I am unable to connect to internet.
I got the apn settings changed by Mobile Company but the net is still not working.
The Net is working when the sim card is used in other mobile
I formatted my mobile & installed UK official JB ROM again [System Version 982.124.14.XT910.Retail.en.EU] by using AP fastboot but the 3G is still not working.
Does Anybody knows the solution ??? I also wanted to know whether formatting the CID file will help.
Click to expand...
Click to collapse
hmm, the question is if you use other operator, you can connect to Internet.
so, I guess the problem is with the network.
teen9xpro said:
thank for you help :highfive:
Click to expand...
Click to collapse
[GSM][ICS]( KERNELS / RADIOS / MODS / TWEAKS ) to modifiy any ICS rom
Here. Give those a try.
CAUTION: MAKE A FULL BACKUP BEFORE DOING ANYTHING.
neo.ank said:
[GSM][ICS]( KERNELS / RADIOS / MODS / TWEAKS ) to modifiy any ICS rom
Here. Give those a try.
CAUTION: MAKE A FULL BACKUP BEFORE DOING ANYTHING.
Click to expand...
Click to collapse
It's mean that I need to flash my phone to use this ICS rom?
Now I am running JB 4.1.2. Do it work?
teen9xpro said:
It's mean that I need to flash my phone to use this ICS rom?
Now I am running JB 4.1.2. Do it work?
Click to expand...
Click to collapse
Just flash radio.img . Do not flash any other because it won't work on jellybean and ya may brick ya phone . So please make a backup to save ya ass lolz
Thanks!!
Please hit the thanks button if i helped ya in anyways !!!
teen9xpro said:
It's mean that I need to flash my phone to use this ICS rom?
Now I am running JB 4.1.2. Do it work?
Click to expand...
Click to collapse
Look under the baseband section. Those are the baseband files from ICS and will work with JB as well(only the baseband)
You should flash the radio.img file using BMM.
Sent from my DROID RAZR using Tapatalk 2
I have a XT912 and have lost my 3G connection before, It's happened once while on stock and I called the carrier for help. The second time I was on CM10.1 and the setting was the same for the fix. Hopefully it's as simple for you as it was for me:
Settings > Data Usage > Mobile Data > ON
and
Settings > Mobile Networks >Data Enabled > Checked box
Having either of the above two settings will disable your data connection and knock you off 3G. I hope the fix is as easy for you as it was for me!
~S
neo.ank said:
Look under the baseband section. Those are the baseband files from ICS and will work with JB as well(only the baseband)
You should flash the radio.img file using BMM.
Sent from my DROID RAZR using Tapatalk 2
Click to expand...
Click to collapse
I am using safestrap, how can I flash it with BMM
Remove safestrap => I lost my custom rom
Related
i folowed razr guys video to update to jelly bean from ics from the post below
http://forum.xda-developers.com/showthread.php?t=2078021
after i tried to install cm 10 on slot 1 and after that my phone doesnt boot past the safestrap screen. i tried to reflash and it didnt work
then i ended up trying to restore the back up that i made. still doesnt work.
now im just stuck on safestrap screen after which the phone goes black and blank or i can go into safestrap menu but whatever i do in their has no effect on the phone.
need some help and advise how to fix this.
im running a gsm xt910 in canada on fido
Have you tried deleting the ROM Slot 1 and then activating it again?
Gus194 said:
Have you tried deleting the ROM Slot 1 and then activating it again?
Click to expand...
Click to collapse
i had to restart the whole proces again im going to install safestrap and try again letshope it works
naifs_br10 said:
i had to restart the whole proces again im going to install safestrap and try again letshope it works
Click to expand...
Click to collapse
no use i installed and followed the instructions just goes back into SS recovery menu
Cm10.1 requiere ics kernel maybe thats why tour device doesnt boot, what aboit your safe system? If you are using safestrap tour main system should be untouched and be able to boot ...
Sent from my XT910 using xda premium
Thats what i did when I had the same problem! just deleted the safestrap fold and then re-activated rom slot-1! Now it work just like the why it should!
Steven87 said:
Cm10.1 requiere ics kernel maybe thats why tour device doesnt boot, what aboit your safe system? If you are using safestrap tour main system should be untouched and be able to boot ...
what you mean ics kernel ?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
blackops11252 said:
Thats what i did when I had the same problem! just deleted the safestrap fold and then re-activated rom slot-1! Now it work just like the why it should!
Click to expand...
Click to collapse
i didnt get this part.
guys ive been trying to instal cm10.1 for 2 days now if somebody can help me please i'd appreciate it. there isnt much support from what i see on xda forums and my patience is running thing without a phone if somebody can maybe walk me through the steps after the install of the jb leak i'd appreciate it greatly please really need to get a proper rom and i dont have have much understanding except that i have a razr in my hand that is on jb leak thanks to the razr guy guide.
how to get cm 10.1 i dont get it.
Hey man a few days after the JB leak was out spchicks and BDH had a complete guide on how to make the jump stay rooted and how to install SS. hope it helps you.
Sent From My Droid RAZR MAXX
Hello Razr people,
I have Chinese Razr maxx with Blur_Version.67.213.6.XT910.ChinaRetail.en.CN.zip OTA installed.
CDT might have been 5. But still I managed to root with a chinese root method.
Everything was fine until I went outside China.
None of the sim cards I tried were working. And in China, apart from China Telecom, everything else was working.
So I thought, maybe I should try the GSM patch with the magic code patch given in XDA in some other thread.
Hence I went into BMM recovery, installed the patch. rebooted the phone.
And it didn't start at all for like 30 minutes. It was stuck with M logo and blinking every now and then.
Hence, I decided to factory reset from stock recovery. Still it's the same.
And now I think I cannot flash it back to JB, as it was an OTA, and there's no firmware for flashing.
as CDT might have gone higher, I can't even go back to ICS.
I am new to all this, but I have spent a lot of time in reading all this info and now I'm stuck wondering what can i do if JB with higher CDT got bricked?
Please Please guys, I really need help with this,
Thank you very very much in advance. I really really appreciate it.
nishuthereaper said:
Hello Razr people,
I have Chinese Razr maxx with Blur_Version.67.213.6.XT910.ChinaRetail.en.CN.zip OTA installed.
CDT might have been 5. But still I managed to root with a chinese root method.
Everything was fine until I went outside China.
None of the sim cards I tried were working. And in China, apart from China Telecom, everything else was working.
So I thought, maybe I should try the GSM patch with the magic code patch given in XDA in some other thread.
Hence I went into BMM recovery, installed the patch. rebooted the phone.
And it didn't start at all for like 30 minutes. It was stuck with M logo and blinking every now and then.
Hence, I decided to factory reset from stock recovery. Still it's the same.
And now I think I cannot flash it back to JB, as it was an OTA, and there's no firmware for flashing.
as CDT might have gone higher, I can't even go back to ICS.
I am new to all this, but I have spent a lot of time in reading all this info and now I'm stuck wondering what can i do if JB with higher CDT got bricked?
Please Please guys, I really need help with this,
Thank you very very much in advance. I really really appreciate it.
Click to expand...
Click to collapse
Reflash the Chinese fastboot file using rsd lite and then again apply the ota update.zip and do full wipe /factory reset and wipe caches . It will fix ya razr
Thx
Hit the thx button if i helped ya in anyways
anurag.dj2u said:
Reflash the Chinese fastboot file using rsd lite and then again apply the ota update.zip and do full wipe /factory reset and wipe caches . It will fix ya razr
Thx
Hit the thx button if i helped ya in anyways
Click to expand...
Click to collapse
Thanks. However, I was wondering can I still flash the ICS fastboot after having the JB OTA installed that too with higher CDT?
I still have BMM coming when I boot the phone.
So I am afraid of fastbooting the ICS file and loosing even BMM.
Please let me know what do you think is the best option?
A
1. Flash ICS flastboot of Chinaretail.
2. Upgrade via the zip file of the 4.0.4 OTA
3. Update via zip to ChinaRetail JB 4.1.2
or
B
1. Install a custom rom like AOKP on 2nd rom/system slot (Will it work though?)
Thank you very much.
nishuthereaper said:
Thanks. However, I was wondering can I still flash the ICS fastboot after having the JB OTA installed that too with higher CDT?
I still have BMM coming when I boot the phone.
So I am afraid of fastbooting the ICS file and loosing even BMM.
Please let me know what do you think is the best option?
A
1. Flash ICS flastboot of Chinaretail.
2. Upgrade via the zip file of the 4.0.4 OTA
3. Update via zip to ChinaRetail JB 4.1.2
or
B
1. Install a custom rom like AOKP on 2nd rom/system slot (Will it work though?)
Thank you very much.
Click to expand...
Click to collapse
In ya case i believe both method are wrong and wont work on ya razr .
For first method :
Just flash the appropriate china fastboot via rsd and then apply jellybean ota.zip from stock recovery .
Ya don't have to flash ics ota.zip ,just fastboot would work to update ya phone to jellybean
Second method :
Ya can't install akop or cm10 unless ya not on jellybean .
So first update ya phone to jellybean and then root (if root exploit is available for Chinese jellybean ) ,
Install ss or bmm ,
Partition and install custom roms on 2nd or 3rd slot
Thx
Hit the thx button if i helped ya in anyways
Thanks bro. I will do it as soon as my battery is up and will let you know the result.
But really a huge thanks for help.
nishuthereaper said:
Thanks bro. I will do it as soon as my battery is up and will let you know the result.
But really a huge thanks for help.
Click to expand...
Click to collapse
Its my pleasure that i helped ya outta ... please do full charge ya battery a if ya going to flash fastboot because battery drainage problem is sucks while flashing
Thx
Hit the thx button if i helped ya in anyways
Hey man,
Thanks a ton. I got AOKP 4.2.2. JB installed in slot 2 and it's working flawlessly.
However, I cannot access the network provider. So there is no mobile network.
My phone is unlocked.
Another strange thing is that, in the settings menu, the IMEI number is 000000000 ...
Now that is not possible as far as I know.
Any idea as to what I can do to get the network and make phone calls?
Thanks again for all your help.
nishuthereaper said:
Hey man,
Thanks a ton. I got AOKP 4.2.2. JB installed in slot 2 and it's working flawlessly.
However, I cannot access the network provider. So there is no mobile network.
My phone is unlocked.
Another strange thing is that, in the settings menu, the IMEI number is 000000000 ...
Now that is not possible as far as I know.
Any idea as to what I can do to get the network and make phone calls?
Thanks again for all your help.
Click to expand...
Click to collapse
I think ya should flash ya region basband . Try to look on forum for Chinese basband
Hit the thx button if i helped ya in anyways
Hey man, I tried to install the baseband from the previous OTA that was on my phone ... and another Baseband from Chinese JB Fastboot.
However, still no network or no imei.
I am currently in India, so does it mean I will have to find an indian baseband?
Also, AOKP is installed via BMM in rom slot system 2.
Can that be a problem?
I was wondering if I tried to flash with a Chinese JB fastboot via RSDLite, will it flash through properly?
Cause then at least I can send my phone to motorola and ask them about the network issue.
Thanks so much though. Seriously. You are a saviour.
nishuthereaper said:
Hey man, I tried to install the baseband from the previous OTA that was on my phone ... and another Baseband from Chinese JB Fastboot.
However, still no network or no imei.
I am currently in India, so does it mean I will have to find an indian baseband?
Also, AOKP is installed via BMM in rom slot system 2.
Can that be a problem?
I was wondering if I tried to flash with a Chinese JB fastboot via RSDLite, will it flash through properly?
Cause then at least I can send my phone to motorola and ask them about the network issue.
Thanks so much though. Seriously. You are a saviour.
Click to expand...
Click to collapse
No ya don't have to flash Asian retail jellybean ota beacause ya are on Chinese kernel ,ya may stuck on fastboot if ya flash Asian retail on ya razr unless ya don't erase ya cid .
I just can't understand why ya getting network issue even after flashing all the baseband. Damn !!
Try to flash Indian baseband it may help ya .
Nah flashing any custom rom on another slot doesn't affect stock slot at all akop or cm10 is not the issue .
Edit : flashing different region kernel and bricking ya phone and send it to service centre wont help ya at all beacsue they ll come to know that ya tried to flash it illegally so ya warranty no more void . As ya saying ya in India and using Chinese xt910 ,service centre ll not accept it so ya need to go back to China and give it there for fix
Thx
Hit the thx button if i helped ya in anyways
This is a patch to fully enable GSM on every Stock Rom, on every AOSP Rom and on every Android version.
This in not for US users, in US the GSM is locked in RIL.
Release 4.x
This patch will enable:
-GSM
-SMS
-MMS
-3G Data
-USSD Code
-Call Forwarding
I'm constantly updating only this main thread and I will answer only in it, I have no time to update and control every thread in sub-forums.
I'm using this thread only for major notifications.
Kernel
First of all, thanks for the patch.I'm planing to use it for the eclipse rom.
But there is still a problem.The kernel.Some roms are based on the american kernel.And flashing that kernel on eu devices will take me to fastboot mode even with the cid partition erased.
But i guess that this problem needs to be discussed with the rom developer.
ryd3r89 said:
First of all, thanks for the patch.I'm planing to use it for the eclipse rom.
But there is still a problem.The kernel.Some roms are based on the american kernel.And flashing that kernel on eu devices will take me to fastboot mode even with the cid partition erased.
But i guess that this problem needs to be discussed with the rom developer.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2174390&page=12
see post #115
heblu said:
http://forum.xda-developers.com/showthread.php?t=2174390&page=12
see post #115
Click to expand...
Click to collapse
Thanks.I'm running jelly bean,so I cant flash the rom.Too bad
We managed it to boot stock Rom on kexec kernel finally . I will release a kexec patch + gsm patch tonight. Then you can run any rom while the stock kernel doesn't matter. I will do the same for cdma, so cdma users can run any gsm rom. The kernel will be a unmodified one, no extras so far. Keep in mind that JBX KERNEL will not with with it!
The first bigger project for advanced stock experience is catalyst 3 rom on JBX Kernel. Maybe also tonight ..
http://forum.xda-developers.com/showthread.php?p=43756937
Gesendet von meinem XT910 mit Tapatalk 4 Beta
I cant wait mate Great Work!!!
Btw: This "patch" doesn't work for GSM users - only for XT912 which is in GSM networks. The ril libs are responsible, so XT910 users will not be able to pass SIM pin.
But doesn't matter. I made a new GSM patch for it..
ryd3r89 said:
First of all, thanks for the patch.I'm planing to use it for the eclipse rom.
But there is still a problem.The kernel.Some roms are based on the american kernel.And flashing that kernel on eu devices will take me to fastboot mode even with the cid partition erased.
But i guess that this problem needs to be discussed with the rom developer.
Click to expand...
Click to collapse
I can't help you.
dtrail1 said:
Btw: This "patch" doesn't work for GSM users - only for XT912 which is in GSM networks. The ril libs are responsible, so XT910 users will not be able to pass SIM pin.
But doesn't matter. I made a new GSM patch for it..
Click to expand...
Click to collapse
Yes, this patch is for XT912 VZW.
Mentor.37 said:
I can't help you.
.
Click to expand...
Click to collapse
Not a problem since the Kexec patch has been released.
@dtrail1 Curious I am about this miui. I have noticed a lot if conversations about this over the past months... Hit me up on Google talk/hangouts if you would like one more tester.. Ty. (Pretty Krazy what you, hash, dhacker, and anyone else involved are doing to the RAZR.. Without you guys RAZR would be dead right now.. As I am sure you know.. Thanks much..)
XT912 RaZR SpYdEr CDMA
So whats the use again? Can i go to tmobil now?
RAZR MAXX
Work like a champ :good::good:
Finally Liquidsmooth without any gsm signals problems:victory:
Any change or trouble i'll post it.
Thanks for this
HELP?
hello, I have Cyanogenmod 10.1.2 on motorola razr XT912, I want to know if flashing this patch and can work all it says in the description????
[email protected] said:
hello, I have Cyanogenmod 10.1.2 on motorola razr XT912, I want to know if flashing this patch and can work all it says in the description????
Click to expand...
Click to collapse
Yes it would man,give it a try.
Sent from the moon using xda premium
AztekSoul said:
Yes it would man,give it a try.
Sent from the moon using xda premium
Click to expand...
Click to collapse
Some how its not helping me. I get network drop and no data on both Mokee and MIUI. havent tried another rom yet. Can u suggest a way out?
AztekSoul said:
Yes it would man,give it a try.
Sent from the moon using xda premium
Click to expand...
Click to collapse
as I can flash?
Sent from my DROID RAZR using xda app-developers app
[email protected] said:
as I can flash?
Sent from my DROID RAZR using xda app-developers app
Click to expand...
Click to collapse
Just follow the instructions i did that.
And it's working.
Flash over the rom :good:
so i get Fc on phone.android
hy guys!
i flashed it over stock VZ.EN.US 98.72.16 and now i sometimes get FC on com.phone.android.
i would like to get to stock. is there an undo zip for this or do i have to use matts utility? or do a restore just to system?
thanks!
THANK YOU,you saved my razr,like it.
The patch has been updated.
Hi everybody!
I`we been looking the Touchwiz 4.3 ROM for a while, but there is no leak for our t0lte yet.
I surf around and i found AT&A variant forums this; http://forum.xda-developers.com/showthread.php?t=2497994
I flashed it yesterday and everything seems working except wi-fi, but wi-fi is no subject to me.
Also i flashed theme from our themes and apps section, and that worked too.
Just let you no. It`s wort to try
cerisu said:
Hi everybody!
I`we been looking the Touchwiz 4.3 ROM for a while, but there is no leak for our t0lte yet.
I surf around and i found AT&A variant forums this; http://forum.xda-developers.com/showthread.php?t=2497994
I flashed it yesterday and everything seems working except wi-fi, but wi-fi is no subject to me.
Also i flashed theme from our themes and apps section, and that worked too.
Just let you no. It`s wort to try
Click to expand...
Click to collapse
This is a pretty sweet Rom. Just make sure you ask the Op of the Rom for permission to post a link into this thread, just to be on the safe side.
Has anyone found out how to get Wifi working?
UncleSamPT said:
Has anyone found out how to get Wifi working?
Click to expand...
Click to collapse
I think you need to flash bootloader, the same problem is on 7100. If the ROM is MJ5 then you need MJ5 bootloader.
Its worth checking out skynote in the att section. Still no wifi as we have no boot loader but sean has done an amazing job.
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Will we be able to downgrade back to 4.1.2 without any problem if we flash those 4.3 roms?
Ruthx said:
Will we be able to downgrade back to 4.1.2 without any problem if we flash those 4.3 roms?
Click to expand...
Click to collapse
Yes of course. Why not?
cerisu said:
Yes of course. Why not?
Click to expand...
Click to collapse
I read some people are having problems with their imei/modem when they downgraded or is that only with the official leaked? kinda noob sorry
Ruthx said:
I read some people are having problems with their imei/modem when they downgraded or is that only with the official leaked? kinda nood sorry
Click to expand...
Click to collapse
Don`t be sorry. That`s why we are here, to help each other. Eweryone of us has been noob sometime.
What about 4G? Does that work?
cerisu said:
Hi everybody!
I`we been looking the Touchwiz 4.3 ROM for a while, but there is no leak for our t0lte yet.
I surf around and i found AT&A variant forums this; http://forum.xda-developers.com/showthread.php?t=2497994
I flashed it yesterday and everything seems working except wi-fi, but wi-fi is no subject to me.
Also i flashed theme from our themes and apps section, and that worked too.
Just let you no. It`s wort to try
Click to expand...
Click to collapse
i try to flash this on my korean note 2 shv-e250s but always stuck on unmounting /sdcard /data stage . any solution for this ?
i try to flash this on my hongkong Note2 LTE N7105
only the wifi not work , bluetooth & LTE & PhoneCall & Whatsapp+ & wechat & playstore is all okay:fingers-crossed::fingers-crossed:
cyrustsui said:
i try to flash this on my hongkong Note2 LTE N7105
only the wifi not work , bluetooth & LTE & PhoneCall & Whatsapp+ & wechat & playstore is all okay:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
wifi quite important for us lol
Hi, just a thought. I have flashed AT&T roms on the N7105 and they have worked pretty fine before. Since this is a 4.3 build, am guessing there is a need to flash the base rom (the leaked firmware) and then flash the rom from the developer. Might get things working. Cheers.
Sent from my GT-N7105 using xda app-developers app
Hi there, aside from WiFi I've had no issues with the ROM. Just a regular twrp flash of the ROM required.
Sent from my SAMSUNG N7105 using XDA Premium HD app
hi cyrus
http://forum.xda-developers.com/showthread.php?p=15
i.use note2 lte.hong kong ver
rhe rom new ver <10/11>.wifi is not..work?
thx
Sent from my GT-N7105 using xda premium
try this wifi fixfor MJ5 bootloader
http://forum.xda-developers.com/attachment.php?attachmentid=2342179&d=1382427777
brayann16k said:
try this wifi fixfor MJ5 bootloader
http://forum.xda-developers.com/attachment.php?attachmentid=2342179&d=1382427777
Click to expand...
Click to collapse
No need for fix, a kernel is posted here: http://forum.xda-developers.com/showpost.php?p=47416297&postcount=1771 that fixes the Wifi on the 7105. 4G/LTE works just fine. Best thing ever happend in months here :victory:
Hmm, wonder how to put swedish language in the ROM?
J.K Nilsson
J.K Nilsson said:
No need for fix, a kernel is posted here: http://forum.xda-developers.com/showpost.php?p=47416297&postcount=1771 that fixes the Wifi on the 7105. 4G/LTE works just fine. Best thing ever happend in months here :victory:
Hmm, wonder how to put swedish language in the ROM?
J.K Nilsson
Click to expand...
Click to collapse
Try language enabler from play store, It worked on some other samsung roms
Rurik1970 said:
Try language enabler from play store, It worked on some other samsung roms
Click to expand...
Click to collapse
I used the locale & language app from market.
So I went ahead and risk to flash this rom. The developer said it support all note 3 models.
It is a S5/ note 4 rom. I like it. Using it as driver until jasmine updates to 2.5.
Anyways there some things of the note 4 s note that I can't use because of Knox. Here is the rom and some screen shots from me. By the way I have t-mobile service. http://forum.xda-developers.com/galaxy-note-3/development/rom-t2891226
Thanks. I might give this a shot myself
?Galaxy ?Note 3?
I tried to install this on ROM slot 1 to give it a try, but it wouldn't boot. How did you install this?
I tried it on stock slot and it booted but no 4glte and lotsa bugs. . Sticking to JasmineROM 2.4.1
?Galaxy ?Note 3?
Yeah flashing a rom on slot 1 doesnt seem to work. I get lte on tmobile service. But the only bug I found was the after a reboot I loose cell connection and cant get it back.... But I'm testing roms from other variants without a kernel and so far im getting them working. We do have the same motherboard so there shouldn't be a problem on porting these roms. As of right now im porting hyperdrive from tmobile variant since its more updated than ours. Once I get it all working fine. I'll ask the developer if he let me take the porting of that here since he doesnt have a verizon note 3. Me and a friend also trying to port the sprint rom 4.4.4
What I really really really want is the liquidsmooth rom for retail edition. . Why won't they just unlock the bootloader already lol ?
do you guys know if their will be any lollipop ROMs for the Verizon Note 3? (non-dev)
Flashed on slot 1. Was pretty smooth for me, but no SMS/4g obviously. I'll try flashing NC4 radios to see if that does anything. Thanks for the find!
Sent from my SM-N900V
that's great.but I can't download on my phone.can you give me download link?
hr222 said:
that's great.but I can't download on my phone.can you give me download link?
Click to expand...
Click to collapse
Why can't you download?
gypsy214 said:
Why can't you download?
Click to expand...
Click to collapse
I don't know.Im in China.I think the china net can't allow my phone to download this rom.
Parker Iverson said:
Flashed on slot 1. Was pretty smooth for me, but no SMS/4g obviously. I'll try flashing NC4 radios to see if that does anything. Thanks for the find!
Sent from my SM-N900V
Click to expand...
Click to collapse
You might need to update you apn for Verizon or what ever your carrier is.
Sheradrax said:
You might need to update you apn for Verizon or what ever your carrier is.
Click to expand...
Click to collapse
am installed few weeks ago using Safestrap 3.75 , and Flash Kernel is working with Kernel NC2,NC4, kk, but everything work minus send SMS ,you have setup APN actually my Data work LTE i have N900V so i dont know yet why i cant send SMS from Hangout i use Whatsapp for now working perfect
I tried looking to change apn, but only gave me a choice of home or automatic . Didn't let me choose an apn
mjh68 said:
I tried looking to change apn, but only gave me a choice of home or automatic . Didn't let me choose an apn
Click to expand...
Click to collapse
try again delete dalvik , cache , system , factory reset and you able to setup APN try use Kernel NC2
jmontalvo248 said:
try again delete dalvik , cache , system , factory reset and you able to setup APN try use Kernel NC2
Click to expand...
Click to collapse
Thanks ,; I will try it again after work. I am using kernel NC2. I am also going to try unmodded version. First I tried v10 modded.
Can anyone link to a working kernel for this rom? Nc2 or nc4 flashable zip if available. Thanks. Found only odin versions
mjh68 said:
Thanks ,; I will try it again after work. I am using kernel NC2. I am also going to try unmodded version. First I tried v10 modded.
Click to expand...
Click to collapse
Still don't have an option to change the Apn . Frustrating because seems like a good rom to try out[emoji20]
raveniselizabeth said:
What I really really really want is the liquidsmooth rom for retail edition. . Why won't they just unlock the bootloader already lol ?
Click to expand...
Click to collapse
If it's such an easy task why don't you unlock the bootloader? If you really really really want liquid smooth, perhaps make a more informed purchase next time and buy a dev unit or a phone whose manufacturer supports unlocking like HTC or Motorola.
---------- Post added at 10:51 AM ---------- Previous post was at 10:50 AM ----------
mjh68 said:
Still don't have an option to change the Apn . Frustrating because seems like a good rom to try out[emoji20]
Click to expand...
Click to collapse
You can access the apns by using voice dialer and saying APN or use *#*#4636#*#* :thumbup:
21031980 said:
Can anyone link to a working kernel for this rom? Nc2 or nc4 flashable zip if available. Thanks. Found only odin versions
Click to expand...
Click to collapse
With a locked bootloader you will not find a flashable kernel. You can only odin flash it.