Hey guys, I'm on the Galaxy 10.1 Tab 7510. I flashed Paranoid Android 3.50 earlier today from another post on here and everything was fine if a little slow. I then found the A1 kernel on Here and flashed the one labeled "A1-p4-1.8.7-wifi-stock.zip". Being an idiot I forgot to make a backup before doing this and when I rebooted I noticed wifi wasn't working (couldn't turn it on) and any time I plug the tablet into my computer nothing shows up as a mounted device. Is there anything I can do? I've tried a wipe/factory reset and wiped both caches. I have no clue how to fix this since it's not like the thing has an SD card slot.
I don't think you should flash the stock version of the kernel. Make a full wipe, reflash ROM, then flash the cm version of A1 kernel.
Sent from my GT-P7500 using XDA Premium HD app
Ok so I was able to use my Nexus 4 and download the A1 CM kernel and send it to my Galaxy via Bluetooth. Went back to clockwork recovery, did a factory reset, wiped both cache, installed the CM kernel and then it wanted to optimize the apps I had. It then shut down and now when I turn the tab back on it just shows the Samsung logo, then a black screen. Do I have any other options?
Wipe system, not just data, cache and dalvik. Then reflash the ROM you had.
Sent from my GT-P7500 using XDA Premium HD app
Related
Hey All,
I had been having troubles with 4.0.3 multi-dpi, so I thought I'd flash Saurom. I flashed this, but upon reboot, I got stuck at the samsung screen. It never went past there, just sat there forever. So, I went back into cwm (holding down vol up/vol down/power), and wiped everything again, and tried to flash saurom again, but same thing happened.
I then tried to flash back to 4.0.3 multi-dpi, with same results. I can get into CWM just fine, but it seems any rom I flash hangs at the samsung boot screen.
Does anyone have any ideas? Right now I'm completely down :/
Thanks in advance for any assistance,
Sebastian
Hi sounds like a bad kernel flash.i would go into cwm, do the usually wipes, go to mounts and storage. Format data. Format system. Format cache only. Pull battery. Install any of the odin install Roms through download mode, That should fix your problem. Then you can start over and flash whatever Rom you want
Sent from my SAMSUNG-SGH-I717 using xda premium
You should restore the latest good backup you created before you flashed whatever is giving you problems.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Just a reminder, when you go to mounts and storage, do not fformat sd storage, this will wipe everything in your memory of your phone
Sent from my SAMSUNG-SGH-I717 using xda premium
A backup restore should do the trick.
-Once you go NOTE, you'd say 4 inches a Joke
Worse comes to worse you can flash stock Odin. If you one clicked for ICS, remember to flash bootloader first
Sent from my SAMSUNG-SGH-I717 using XDA
From my gathering, Saurom & ICS 4.0.3 DPI are incompatible. Meaning you can't flash one on top of the other without doing a full wipe data/factory reset. Having said that, I think the best move then would be to flash back to stock via ODIN, install cwm, redownload whatever ROM to your ex sd card, mount system & data then re-flash.
Shdowalker said:
From my gathering, Saurom & ICS 4.0.3 DPI are incompatible. Meaning you can't flash one on top of the other without doing a full wipe data/factory reset. Having said that, I think the best move then would be to flash back to stock via ODIN, install cwm, redownload whatever ROM to your ex sd card, mount system & data then re-flash.
Click to expand...
Click to collapse
I "believe" all you need to flash through Odin is the GB bootloader, then you can flash GB roms, the ICS bootloader is what causes the hang up with ROM incompatibilities
Sent from my SAMSUNG-SGH-I717 using XDA
Be sure the ROM has the radio load and remember a Nandroid does not flash the radio load. That has to be done manually.
VonEsch said:
I "believe" all you need to flash through Odin is the GB bootloader, then you can flash GB roms, the ICS bootloader is what causes the hang up with ROM incompatibilities
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
I'm not very familiar with Saurom but from what I've read I think that's correct. ICS needs a clean slate to operate from is all I was saying.
I've been running AOKP Milestone 6 for about 2 months now. It always had a problem unlocking the lockscreen at full battery as it didn't receive touch input so I just restarted the tablet. Then it would just reboot as the tablet would not turn off if the power button was held. I dont care. Dont turn it off enough for that to make a difference.
Well one day I woke up turned on the tablet and like normal there was no touch recognition. Oh well reboot like normal. Then my tablet stuck in the AOKP animation. It just froze. About halfway through the animation. I used the hard reboot (vol- and power) and it froze again at about the same place. I WTF and go to CWM and reflash the ROM and it froze at applying data. Hard reboot. Flash Galaxy Task. Freeze at applying data. Flash a backup I made on AOKP milestone 6. Froze at applying data. Plug into computer and flash stock root package. SUCCESS!! Then the AOKP boot animation comes up and freezes at the same place as before. I have no idea what to do as I decided I would flash 1 ROM and leave it on my tab because I've hard bricked my infuse before and didn't want to send this in have it come back broken and buy a new one.
Galaxy tab 10.1 wifi running http://forum.xda-developers.com/showthread.php?t=1459287
What version/mod of CWM are you running?
Grab CWM 5.5.0.4 at this address.works pretty well:
https://sites.google.com/site/arashtarafar/
Remember to wipe data/cache after flashing processes...
arashtarafar said:
What version/mod of CWM are you running?
Grab CWM 5.5.0.4 at this address.works pretty well:
https://sites.google.com/site/arashtarafar/
Remember to wipe data/cache after flashing processes...
Click to expand...
Click to collapse
I'm Running 4.0.0.4. Wasnt planning on flashing a lot of ROM so flashing that would be not so important to me. Checking that site out now.
I noticed I forgot to mention it's a wifi model. will update OP.
This currently happen to me too.
Will try to find 3g stock Rom and try to upgrade CWM
Sent from my HTC Sensation XE with Beats Audio using Tapatalk 2
I am currently having this problem too.
It all started when my wifi started not working so I rebooted my tablet. Suddenly im stuck in a bootloop with no way to get out of it.
I'm able to access CWM and have tried wiping cache, but that didnt work. Now i've tried wiping /data but it freezes.
I'm unable to access my USB as it repeatedly says "E:unable to open ums lunfile (No such file or directory).
I've tried using ADB to push a new flash image which worked but im still stuck in a brand new bootloop (presumably because i cant wipe /data).
Can anyone help? I have NO idea how this happened.
Flash a stock ROM using Odin in download mode...now that you are in such trouble flashing a 3G ROM doesn't make much difference...
I am trying to install cm10 on my Samsung sgh-i577.I have pushed the new cwm on the device go to install zip from sd card.cm10 will install fine when it boots it just hangs on cyangenmod screen. I have let it sit for 10 mins as they have said in the thread for the new kernel. Reboot and it still hangs what I am doing wrong? I am coming from stock ICS. Should I wipe factory data in cwm and wipe cache partition and wipe d. cache and then install?
I am sorry I left that out but I also flashed the latest gpapps for cm 10 I have tried this 6 times. And it just gets stuck at boot I have to go back to stock ICS. I have flashed AOKP,ROOTBOX,CM10 All get stuck
That happend to me too xS. Try what Sewrizer says :good:
I got it I wasn't wiping factory data as soon as done it worked fine but the android keyboard isn't working on cm10 it keeps saying has stopped working. And those are the files I was trying to use and thank you for your help.
I fixed it was the latest version of gpapps that was causing the problem
Anyone wanna move the Convo to the full thread?
http://forum.xda-developers.com/showthread.php?t=1926253
sent from my SGH-I577/LiquidSmooth/1.5oc LZ kernel
I couldn't post in that thread not enough posts
Sent from my SAMSUNG-SGH-I577 using xda app-developers app
Hey guys,
After using a CM9 rom for a long time I decided to try a cm10 nightly. I just flashed the rom in ClockworkMod and dont think I updated anything else such as boot loader. It boots, says "samsung galaxy 10.1, then I get the CM wheel rotating and it comes to a homescreen but says "Unfortunately, setup wizard has stopped" and I click "ok" and it just keeps coming up. I cant get to home screen or anything. I used to be savvy with flashing these diff roms but after I was on a stable CM Rom for so long I kind of forgot and didnt do it right.
Like I said my guess is I flashed a jelly bean rom onto a older kernel or boot loader, forgive me if I am using wrong terms here. I am sure it can be brought back but its been awhile since I did this stuff so any help is appreciated.
thanks in advance.
Craig
Did you make a full wipe i.e. system, data, cache, dalvik before flashing?
Sent from my GT-P7500 using Tapatalk HD
Boot to Download mode and Odin ICS 4.0.4 on the device first. That will give you the required bootloader. You can then root the device before you flash the JB. But you must do full wipes (format/factory reset, format system under Mounts/Storage, wipe dalvik under Advance) before the installation. For the installation, make sure your Recovery is the current one. I use CWM Recovery 6.0.3.2 especially if you wish to install CM 10.1 which is what I run. After the installation wipe cache and dalvik again before rebooting.
Sent from my GT-P7500 using xda app-developers app
This is my first time trying to install this I have a Samsung galaxy s2 T989 And I'm pretty sure I've done it right. I factory wiped it, cleared the cache and the cleared the cache in advanced settings. It's been atlesst over 10min and its still on the blue circle just spinning around.
Can someone please help me?
When I installed cm10.2 for the first time mine done that. Best bet and worked for me is do a battery pull and reboot. If that don't push you past the spinning circle which I ran across you should reinstall the ROM again and it should boot up just fine. Hope this helps
Sent from my SCH-I545 using xda app-developers app
You've bootlooped it. The T989 is a pain when flashing custom ROM's because the custom recovery's built in wipe doesn't quite work for it.
Keep this ZIP handy as you'll be needing to run it every single time you need to wipe data/cache and dalvik. Don't ever ever use any other means of wiping aside from this one until this issue is fixed. I've been doing this for a while and have flashed upwards of 20 ROM's on my T989 alone.
It's called Darkside Super Wipe.
http://forum.xda-developers.com/showthread.php?t=1477955
So, just put that ZIP on your SD card, along with your custom ROM and appropriate Gapps. Flash Darkside first (always) then flash ROM then Gapps. Then reboot and problem solved!!
Good luck!! :highfive:
So after putting that in my sd card. Install that and gapps and cm10.2?
Sent from my SGH-T989 using xda app-developers app
murtillon said:
So after putting that in my sd card. Install that and gapps and cm10.2?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Yup, install Darkside Super Wipe first, then install the ROM zip then Gapps. Then reboot!
Should I factory reset and clear caches first or no?
Sent from my SGH-T989 using xda app-developers app
murtillon said:
Should I factory reset and clear caches first or no?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Nope, just run the Darkside Super Wipe and it'll erase all /system, /data and /cache partitions. And like the thread says, it won't wipe your SD card or EMMC.
Just make sure you don't leave the recovery without flashing the ROM and Gapps
Also, you should get in the habit of making backups. You can make them from CWM or TWRP's custom recovery.
Titanium backup is an application on the Google Play store that you should look into as well my friend.
T989 Tears
Very finicky phone for customs. On mine I can get no ROM to fully load other than the stock Koodo 4.04, and CM 10.0 I flashed the latest radio for JB, darkside super wipe, flash custom rom, flash gapps, wipe dalvik. The same process for every ROM i try... still no success, 10.2 stays at boot. Dirty Unicorns starts boot, goes through the "optimizing apps" stage gets to the "starting apps" and reboots, lather, rinse, repeat. I've tried a few others, AOKP and some others. Still only Koodo 4.04 and CM 10.0 will fully boot. Not even the stock T-mobile 4.03 will boot (came with phone). Going to give JMT a shot, it looks pretty