I was using CM7 on my X10i, and i wanted to update to CM10, too bad i flashed the phone with wrong kernel and brick it. However, the phone is recovered now, i rooted it, installed xRecovery, but when i try to unlock the bootloader in order to flash the kernel i got this:
Welcome to S1 tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "R4A045"
MODEL (from GDFS): E10i
SOFTWARE VERSION: 1235-3408_2.1.1.A.0.16
CUSTOM VERSION: 1237-1709_R14B
FILESYSTEM VERSION: CHINA-1-8_2.1.1.A.0.16
SERIAL NO: BX902BT4AW
NOT RECOGNIZED SIMLOCK CERTIFICATE
MAYBE YOU SHOULD UNLOCK PHONE BY SETOOL2 ?
Elapsed:41 secs.
Im scared to run msm7227_semc.cmd because of this NOT RECOGNIZED SIMLOCK CERTIFICATE. Before the brick there was SEMC_SIMLOCK CERTIFICATE.
However i try to flash the kernel via Flashtool but i got this:
21/057/2013 16:57:26 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
21/057/2013 16:57:26 - INFO - You can drag and drop ftf files here to start flashing them
21/057/2013 16:57:31 - INFO - Device disconnected
21/057/2013 16:57:45 - INFO - Selected E10_2.6.32.60-nAa-05.ftf
21/057/2013 16:57:45 - INFO - Preparing files for flashing
21/057/2013 16:57:45 - INFO - Please connect your device into flashmode.
21/059/2013 16:59:51 - INFO - Device connected in flash mode
21/059/2013 16:59:51 - INFO - Opening device for R/W
21/059/2013 16:59:51 - INFO - Reading device information
21/059/2013 16:59:51 - INFO - Phone ready for flashmode operations.
21/059/2013 16:59:51 - INFO - Current device : E10i - BX902BT4AW - 1237-1709_R14B - 1235-3408_2.1.1.A.0.16 - CHINA-1-8_2.1.1.A.0.16
21/059/2013 16:59:51 - INFO - Start Flashing
21/059/2013 16:59:51 - INFO - Processing loader
21/059/2013 16:59:51 - INFO - Checking header
21/059/2013 16:59:51 - INFO - Ending flash session
21/059/2013 16:59:51 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
21/059/2013 16:59:51 - ERROR - Error flashing. Aborted
21/059/2013 16:59:52 - INFO - Device connected in flash mode
21/059/2013 16:59:53 - INFO - Device disconnected
Should i risk with msm7227_semc.cmd? Manifaction date is 10W26 according the phone sticker and im 100% sure that i unlocked it once before the bricking, but i dont know after this jteg repair, give me some advice please.
kumboom said:
I was using CM7 on my X10i, and i wanted to update to CM10, too bad i flashed the phone with wrong kernel and brick it. However, the phone is recovered now, i rooted it, installed xRecovery, but when i try to unlock the bootloader in order to flash the kernel i got this:
...
Should i risk with msm7227_semc.cmd? Manifaction date is 10W26 according the phone sticker and im 100% sure that i unlocked it once before the bricking, but i dont know after this jteg repair, give me some advice please.
Click to expand...
Click to collapse
Trying to unlock the bootloader of your device won't break it as bad as flashing the wrong kernel did. The only thing that can happen is that you lose the ability to connect to your providers network.
If you unlock the bootloader, boot up the phone and see if you still have signal. If that's ok you can go and flash the kernel.
If you don't have a signal, use S1tool's restore button to relock the bootloader again, usually your signal will come back that way.
And don't forget to delete the x10blrelock.ftf from your flashtool folder if you haven't already.
Ive tried msm7227_semc.cmd and the phone is bricked again
kumboom said:
Ive tried msm7227_semc.cmd and the phone is bricked again
Click to expand...
Click to collapse
What happened?
SmG67 said:
What happened?
Click to expand...
Click to collapse
S1 Tool said "NOT RECOGNIZED SIMLOCK CERTIFICATE", but i started msm7227_semc.cmd anyway - it says "access denied" few times and the phone was restarted. I had signal and everything so i decided the unlocking was successful. I turned off the phone in order to flash the kernel, but when i started the Flashtool and it says "Hold back and plug the cabel" nothing happened (no green light, no screen, no nothing) than i tried to turn on or recharge the phone and nothing again. Bricked like before.
I guess the guy from the service was not using jtag repair machine, but replace the main chip, so thats why the phone act like it was manifactured after 11W21. However i didnt want to use the stock kernel so i had to try
Im separeted between U and Sola now
kumboom said:
S1 Tool said "NOT RECOGNIZED SIMLOCK CERTIFICATE", but i started msm7227_semc.cmd anyway - it says "access denied" few times and the phone was restarted. I had signal and everything so i decided the unlocking was successful. I turned off the phone in order to flash the kernel, but when i started the Flashtool and it says "Hold back and plug the cabel" nothing happened (no green light, no screen, no nothing) than i tried to turn on or recharge the phone and nothing again. Bricked like before.
I guess the guy from the service was not using jtag repair machine, but replace the main chip, so thats why the phone act like it was manifactured after 11W21. However i didnt want to use the stock kernel so i had to try
Im separeted between U and Sola now
Click to expand...
Click to collapse
I guess you forgot to root the phone before starting the unlock-process, that's why you got access denied errors.
I'm not sure what you flashed though, but if you did anything else than the x10blrelock.ftf it should have failed.
SmG67 said:
I guess you forgot to root the phone before starting the unlock-process, that's why you got access denied errors.
I'm not sure what you flashed though, but if you did anything else than the x10blrelock.ftf it should have failed.
Click to expand...
Click to collapse
No, Im pretty sure that the phone was rooted. I did it with SuperOne click - i check after and i had Superuser app in the menu. After that i installed Root explorer, granted superuser permissions and copy files of xRecovery at /system/bin. If the phone wasnt rooted i wasnt able to do that.
But, if u are using e10i ... U should need 11w04 like mine or a little bit higher, or it will hard brick it.
Related
So you did the inevitable... you got a phone that's bricked.. fear not.. this happens to all of us.. consider it a "right of passage" when it comes to dealing with custom ROM's
Here at xda, help is never too far away (I was there once too)
I've tried to get you back to functioning latest Local 2.1 with recovery (xrecovery)
0) You'll lose all data with this method....
come to terms with that... not stuff on the sd card but data of your phone, sms'es, contacts, applications etc
1) Turn off your phone
Pull the battery and reinsert it if you have to...
2) Install Flashtool
go here and downlad flashtool
Install on your windows pc
Thank Androxyde and Bin4ry for this kickass tool
3) Download and flash stock 2.1
Go to this thread and download a 2.1 rom in your language of choice (Dont worry that it's not your local ROM)
4) Flash this rom using Flashtool
In the first link there is a how-to. follow it and flash the downloaded ROM from step 3
Once you have 2.1 on your phone,
5) Enable USB Debugging and Root
Use flashtool and root your phone using the simple button "Root" (I know!! what an awesome tool right!!?? )
Once rooted, disconnect the phone.
6) Get yourself a root file manager
Download a file manager capable of root access such as root explorer or solid explorer.
7) Access and edit the build.prop file
Open the file manager. U should get a superuser prompt to allow root access. Touch "Allow". Go to /system and mount the system as RW. there's a file there called build.prop. open it in a text editor. Find all instances of a number that looks like this 1238-9045 (this is my build number, yours will not be the same). Edit this number(all 3 instances) to look like your build number (Found on original box or behind the battery). Save the file and exit
8) Update via SEUS OR PC companion
Now connect your phone back. PC companion or SEUS will tell you there is a new update available. follow the instructions and you'll be running the latest 2.1 for your region and variant of the mini pro
9) [optional] Root and recovery
The new firmware installed by SEUS/PC companion is not rooted. If you need it, root again (same way as in step 5). once rooted, click "Ask root perms" on flashtool. Once root access is confirmed, install xrecovery from the menu.
Hope that helped!
Enjoy
Edit: if you get an error while opening flashtool saying "JVM could not be started because heap size bla bla bla..." Please try on another pc and maybe reinstall windows on urs
Bricked u20i
My phone keeps disconnecting nce the green light goes on. Please help
I have bricked xperia mini x10, and it's failing to boot. Debugging is turned off, so flashboot can't recognize it.
16/010/2012 19:10:31 - INFO - Device connected with USB debugging off
16/010/2012 19:10:31 - INFO - For 2011 devices line, be sure you are not in MTP mode
Click to expand...
Click to collapse
Can someone help?
Immortalis said:
I have bricked xperia mini x10, and it's failing to boot. Debugging is turned off, so flashboot can't recognize it.
Can someone help?
Click to expand...
Click to collapse
Repair it with SEUS or PC Companion.
Step A: leave your phone disconnected from your PC
Step B: Run SEUS/PC Companion, and select update
Step C: It doesn't recognise your phone because it's disconnected and give you a repair option
Step D: Select it, choose your model, it will download the firmware
Step Ea: You get a popup, Press the back-button on your phone while it's off and plug in the USB-Cable
Step Eb: If you can't turn off your phone, plug in the USB-cable and press home- and power-buttons at the same time, it will do a hard reboot and enter flashmode.
Step F: Wait till it's done...
everything past item 3 is pretty hard since we can't acces anything on phone(that's bricking a phone right) to enable usb debugging.
Good tutorial though for those who installed a custom rom and they want to revert to original plus root acces.
Any ideea how to force seus or flash to force flash?
slvjpn said:
everything past item 3 is pretty hard since we can't acces anything on phone(that's bricking a phone right) to enable usb debugging.
Good tutorial though for those who installed a custom rom and they want to revert to original plus root acces.
Any ideea how to force seus or flash to force flash?
Click to expand...
Click to collapse
You don't need usb-debugging in order to flash your phone.
SmG67 said:
You don't need usb-debugging in order to flash your phone.
Click to expand...
Click to collapse
tell this to my sister's x10 pro mini ). I know your right but the phone is @&&&@%))+6)-)-))-=+( up so it doesn't know human comands
Help needed !!
Hi to all,i`m new on this forum and new to Sony Ericsson!
Few days ago i did a repair option with the PcCompanion,becouse i removed to much apk`s.
After about 2 minutes,PcCompanion displayed error (code 100) and stopped flashing!
Searched the internet and found solution!
Flashtool!
But no way it keeps telleing me an error!
17/028/2012 17:28:11 - INFO - <- This level is successfully initialized
17/028/2012 17:28:11 - INFO - Flashtool Version 0.7.0.0 built on 2012-04-14 11:34:01
17/028/2012 17:28:11 - INFO - You can drag and drop ftf files here to start flashing them
17/028/2012 17:28:20 - INFO - Device disconnected
17/028/2012 17:28:38 - INFO - Selected Xperia X10 Mini Pro (U20)_2.1 (2.1.1.A.0.6) Reloaded_Greek (by Leajian).ftf
17/028/2012 17:28:38 - INFO - Preparing files for flashing
17/028/2012 17:28:53 - INFO - Please connect your device into flashmode.
17/029/2012 17:29:01 - INFO - Device connected in flash mode
17/029/2012 17:29:02 - INFO - Opening device for R/W
17/029/2012 17:29:03 - INFO - Reading device information
17/029/2012 17:29:03 - INFO - Phone ready for flashmode operations.
17/029/2012 17:29:03 - INFO - Start Flashing
17/029/2012 17:29:03 - INFO - Flashing loader
17/029/2012 17:29:04 - INFO - Loader : S1_Loader_Root_8e35 - Version : R4A045 / Bootloader status : UNROOTABLE
17/029/2012 17:29:04 - INFO - Flashing fota1.sin
17/029/2012 17:29:04 - INFO - Ending flash session
17/029/2012 17:29:04 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Block verification failed";
17/029/2012 17:29:04 - ERROR - Error flashing. Aborted
17/029/2012 17:29:05 - INFO - Device connected in flash mode
17/029/2012 17:29:07 - INFO - Device disconnected
17/029/2012 17:29:09 - INFO - Device connected in flash mode
please any help will be usefull!
How to bring back alive my X10 Mini Pro?
Now the only thing happends,green blink for 1 second and a bit vibration!
Also tryed with SEUS,no suc6!
(Damn I've been gone a while)
Not too sure of the greek firmware file bro.. can you put the link of the forum where you got it from? are you sure it is a stock firmware?
gixxerfan said:
Hi to all,i`m new on this forum and new to Sony Ericsson!
Few days ago i did a repair option with the PcCompanion,becouse i removed to much apk`s.
After about 2 minutes,PcCompanion displayed error (code 100) and stopped flashing!
Searched the internet and found solution!
Flashtool!
But no way it keeps telleing me an error!
17/028/2012 17:28:11 - INFO - <- This level is successfully initialized
17/028/2012 17:28:11 - INFO - Flashtool Version 0.7.0.0 built on 2012-04-14 11:34:01
17/028/2012 17:28:11 - INFO - You can drag and drop ftf files here to start flashing them
17/028/2012 17:28:20 - INFO - Device disconnected
17/028/2012 17:28:38 - INFO - Selected Xperia X10 Mini Pro (U20)_2.1 (2.1.1.A.0.6) Reloaded_Greek (by Leajian).ftf
17/028/2012 17:28:38 - INFO - Preparing files for flashing
17/028/2012 17:28:53 - INFO - Please connect your device into flashmode.
17/029/2012 17:29:01 - INFO - Device connected in flash mode
17/029/2012 17:29:02 - INFO - Opening device for R/W
17/029/2012 17:29:03 - INFO - Reading device information
17/029/2012 17:29:03 - INFO - Phone ready for flashmode operations.
17/029/2012 17:29:03 - INFO - Start Flashing
17/029/2012 17:29:03 - INFO - Flashing loader
17/029/2012 17:29:04 - INFO - Loader : S1_Loader_Root_8e35 - Version : R4A045 / Bootloader status : UNROOTABLE
17/029/2012 17:29:04 - INFO - Flashing fota1.sin
17/029/2012 17:29:04 - INFO - Ending flash session
17/029/2012 17:29:04 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Block verification failed";
17/029/2012 17:29:04 - ERROR - Error flashing. Aborted
17/029/2012 17:29:05 - INFO - Device connected in flash mode
17/029/2012 17:29:07 - INFO - Device disconnected
17/029/2012 17:29:09 - INFO - Device connected in flash mode
please any help will be usefull!
How to bring back alive my X10 Mini Pro?
Now the only thing happends,green blink for 1 second and a bit vibration!
Also tryed with SEUS,no suc6!
Click to expand...
Click to collapse
cant flash using SEUS...its saying i have latest version but in reality the phone is already bricked by me and not having the original stock firmware... now it just keeps restart with sony erricson logo and turns off again and bootloop...cant root, cant flash... heard that there is some special modified usb that will make the bootloader enter download mode so that we can flash fresh firmware inside it?
jasonmiracle said:
cant flash using SEUS...its saying i have latest version but in reality the phone is already bricked by me and not having the original stock firmware... now it just keeps restart with sony erricson logo and turns off again and bootloop...cant root, cant flash... heard that there is some special modified usb that will make the bootloader enter download mode so that we can flash fresh firmware inside it?
Click to expand...
Click to collapse
You can always flash... post your model and if your bootloader is locked or unlocked ( since you're on SE kernel logo, i assume it's locked), and i can provide you with stock firmware (E10i or U20i) to flash with flashtool.
SmG67 said:
You can always flash... post your model and if your bootloader is locked or unlocked ( since you're on SE kernel logo, i assume it's locked), and i can provide you with stock firmware (E10i or U20i) to flash with flashtool.
Click to expand...
Click to collapse
hi, i am u20i model...i accidentally locked the bootloader while having nna kernel i think, because flashing customised rom and kernel, my phone will enter bootloop, thats why i pressed Restore inside s1tool.exe, which got my bootloader locked....
and now that my bootloader is locked, and i cant root my phone without turning it on( the phone bricked cant turn on anymore) i cant unlock my bootloader to flash new kernels into it... please do provide stock firmware and rom for me... i can only flash stock kernel, but not the rom... after i flashed the stock u20i kernel, i dont know how to flash the original rom into my phone, since now my phone, didnt have the CWM or XRecover anymore, which can browse my SD card, and install the rom from .zip files....
flashing stock kernel no problem but did not know how to flash the stock rom
01/041/2012 15:41:58 - INFO - Device connected in flash mode
01/041/2012 15:41:59 - INFO - Opening device for R/W
01/041/2012 15:41:59 - INFO - Reading device information
01/042/2012 15:42:00 - INFO - Phone ready for flashmode operations.
01/042/2012 15:42:00 - INFO - Start Flashing
01/042/2012 15:42:00 - INFO - Processing loader
01/042/2012 15:42:00 - INFO - Checking header
01/042/2012 15:42:00 - INFO - Flashing data
01/042/2012 15:42:02 - INFO - Loader : S1_Loader_Root_8e35 - Version : R4A045 / Bootloader status : UNROOTABLE
01/042/2012 15:42:02 - INFO - Processing kernel.sin
01/042/2012 15:42:02 - INFO - Checking header
01/042/2012 15:42:02 - INFO - Flashing data
01/042/2012 15:42:05 - INFO - Ending flash session
01/042/2012 15:42:05 - INFO - Flashing finished.
01/042/2012 15:42:05 - INFO - Please unplug and start your phone
01/042/2012 15:42:05 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
01/042/2012 15:42:06 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
unable to flash customised kernel probably because of the locked bootloader
01/052/2012 15:52:27 - INFO - Device connected in flash mode
01/052/2012 15:52:27 - INFO - Opening device for R/W
01/052/2012 15:52:28 - INFO - Reading device information
01/052/2012 15:52:28 - INFO - Phone ready for flashmode operations.
01/052/2012 15:52:28 - INFO - Start Flashing
01/052/2012 15:52:28 - INFO - Processing loader
01/052/2012 15:52:28 - INFO - Checking header
01/052/2012 15:52:28 - INFO - Ending flash session
01/052/2012 15:52:28 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
Click to expand...
Click to collapse
s1tool shows locked bootloader
i1109.photobucket.com/albums/h426/jasonforeverlove/11-2.jpg
problem- cant turn on the phone in order to choose usb debugging mode to root the phone
problem- SEUS cant detect update to my phone...
spent 3 weeks in vail...wish i can get it working ...reli hope to succeed in using customised ROM
jasonmiracle said:
hi, i am u20i model...i accidentally locked the bootloader while having nna kernel i think, because flashing customised rom and kernel, my phone will enter bootloop, thats why i pressed Restore inside s1tool.exe, which got my bootloader locked....
...
spent 3 weeks in vail...wish i can get it working ...reli hope to succeed in using customised ROM
Click to expand...
Click to collapse
Download this, It's the complete SE 2.1 Firmware (Kernel and ROM), flashable with flashtool.
(It's about 213.5MB, although the site may display it's less in your download dialog, but it will keep downloading till it's all there)
SmG67 said:
ubuntuone.com/515oWr7b8j4PeeZfm8xZ1pIt's the complete SE 2.1 Firmware (Kernel and ROM), flashable with flashtool.
(It's about 213.5MB, although the site may display it's less in your download dialog, but it will keep downloading till it's all there)
Click to expand...
Click to collapse
im trying this out... :victory:
tks for the thread, dude
My X10 mini pro won't turn on.
I've try the methods that mentioned in this thread but it all failed.
my phone still won't turn on. if i charged it, it's just boot for 2 seconds and then dead. repeatedly.
any suggestion?
*sorry for bad english
itwasgood said:
My X10 mini pro won't turn on.
I've try the methods that mentioned in this thread but it all failed.
my phone still won't turn on. if i charged it, it's just boot for 2 seconds and then dead. repeatedly.
any suggestion?
*sorry for bad english
Click to expand...
Click to collapse
Repair with Sony Update Service or PC Companion?
SmG67 said:
Repair with Sony Update Service or PC Companion?
Click to expand...
Click to collapse
already tried it. but still it won't turned on.
flashtool does not recognize my phone
flashtool does not recognize my x10 mini pro, screen still remains black, seus and pc companion does not recognize it either. what do i do?:crying:
itwasgood said:
already tried it. but still it won't turned on.
Click to expand...
Click to collapse
Your tried to unlock your booloader and now dont turn on?
If your phones was manufacturated after 11w29, you got a hard brick.
I haven't found the guide to unbrick the SE Xperia 2011 "bricked" device, then here it goes.
All of the following worked on my ST15i Xperia Mini Smultron.
So, your device was briked (doesn't turn on and probably blinks its LED).
If your device's LED works or you are able to turn it to flashmode (green LED light) then you can unbrick it using this short guide. In the over case bring it to Service.
Let me guess. Your device was unlocked and/or rooted just before it got bricked. Right? And you have tried to install official FOTA update. Right? I have bad news. After you have unlocked the bootloader the official installer (built into SE Android ROM) will always brick your smartphone. From now on you have to install all the updates and stuff via Flashtool or Clockwork Recovery only.
I assume you have downloaded and installed Flashtool for Sony Ericsson devices. Also I assume all the necessary drivers are installed on your PC.
Download attached file and extract the *.tft from it.
Put it to the Flashtool/firmwares/ folder.
Start the Flashtool, click Flash icon, select Flashmode, select the *.tft file.
Put your device onto flashmode and flash.
You're right, and there is always a need for these things, thank you.
Thank you for your file.
I've bricked my Xperia yesterday after a OTA update before unlocking bootloader with "Test point" method.
For me, worked flashing stock rom .62 with Wotan Server.
S1 tool flashed correctly ROM but still phone won't boot.
Now I have a question, after flashing new rom and "unbrick" the device my bootloader was unlocked and I must retry the steps of "Testpoint" or it is already unlocked?
SOLVED: Did the job hitting "RESTORE" in s1tool after wiping phone hitting "Restore" in Companion and flashing useless ftf bootloader relocker... '-.-
i cant get it to work
ok, can you please tell me exactly what to do after flashing the files on the phone?
i cant get it to boot, i also tried wotan but to no avail, the phone is dead
however let me tell you what my problem is:
my phone is a non branded ST17i (xperia active) rooted. nothing more not unlocked bootloader, no custom rom.
it was updated about more than a month ago (so i doubt it is bricked for that reason).
yesterday the screen began to act *funny* with a strange colored line in the top (i added an image of how it looked like), i restarted it, and it rebooted fine, so i put it to charge, from time to time within 30 *mins* i checked to see if the line was there again, but nothing, about an hour later i wanted to play with it and check whatsapp, but the screen would not turn on, it was totally frozen, as it happened before i just removed and inserted the battery (since this always fixed it), but then, it would not show a single thing on the screen, actually not even the buttons at the bottom would light up (back-home-menu), the only thing that seems to work is the vibration, and the notification led, after a few tries i removed and inserted the battery and put it to charge, but again, nothing, when it is turned off and you charge it, it reacts to touch lighting the buttons and showing the battery level on screen, but nothing, it is actually dead, so i don't know if it is bricked or no.
firstly i tried flashing with wotan, but nothing, i also tried flashing with seus, but nothing, and i don't understand, what to do with you post, i flash the files you posted, but then what?, do i boot it normally or do i need to flash something else?
i would be very grateful with a detailed step by step
If you haven't unlocked bootloader or flashed custom ROM or kernel your problem is very very strange...
First question: Phone will enter correctly in "Download" mode pressing VOL- during boot?
If you connect the device at PC it will be recognized? Launching Companion will detect a "Generic" SE phone or you will display the exact model? Have you tried a repair?
is not that strange look:
http://forum.xda-developers.com/showthread.php?t=1572972
to your questions:
*yes, the phone enters flash mode
*yes it is correctly recognized by PC
*companion recognizes the exact model
*i have tried more than twice to reinstall and repair the phone software, as stated before, and the progress goes smooth showing NO errors.
phone does not start, does not boot.
if you have any ideas please let me know
linkendis said:
is not that strange look:
http://forum.xda-developers.com/showthread.php?t=1572972
to your questions:
*yes, the phone enters flash mode
*yes it is correctly recognized by PC
*companion recognizes the exact model
*i have tried more than twice to reinstall and repair the phone software, as stated before, and the progress goes smooth showing NO errors.
phone does not start, does not boot.
if you have any ideas please let me know
Click to expand...
Click to collapse
Try to download S1tool and tell me what output do you obtain pressing "IDENTIFY" with Download mode phone attached to PC.
this is what s1tool shows:
RUNNING S1_EROM VER "R9A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "00EC/00B3"
LOADER VERSION: "R4A069"
MODEL (from GDFS): ST17i
SOFTWARE VERSION: 1250-5521_4.0.2.A.0.62
CUSTOM VERSION: 1257-6548_R3D
FILESYSTEM VERSION: WORLD-i_4.0.2.A.0.62
SERIAL NO: CB5A1HD0V6
SEMC SIMLOCK CERTIFICATE
Elapsed:8 secs.
i see the restore button, but this phone is practically in factory state, as noted before, so i haven't tried anything else.
any ideas will be welcome
linkendis said:
this is what s1tool shows:
RUNNING S1_EROM VER "R9A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "00EC/00B3"
LOADER VERSION: "R4A069"
MODEL (from GDFS): ST17i
SOFTWARE VERSION: 1250-5521_4.0.2.A.0.62
CUSTOM VERSION: 1257-6548_R3D
FILESYSTEM VERSION: WORLD-i_4.0.2.A.0.62
SERIAL NO: CB5A1HD0V6
SEMC SIMLOCK CERTIFICATE
Elapsed:8 secs.
i see the restore button, but this phone is practically in factory state, as noted before, so i haven't tried anything else.
any ideas will be welcome
Click to expand...
Click to collapse
You not need to restore the device because you have already a locked bootloader.
Try to re-flash with Wotanserver with another firmware version.
If problem persist, I think you need to meet local service center...
Telephone Mini Pro
Boot loader opened
Version 62 is installed
Who I got you update ota
After that turn off the device no longer works
Now the phone does not boot
Tested program FlashTool
Update and work efficiently but the device still does not work
This report flash Toole
02/013/2012 12:13:29 - INFO - Selected SK17i_4.0.2.A.0.62__1251-0103_.ftf
02/013/2012 12:13:29 - INFO - Preparing files for flashing
02/013/2012 12:13:46 - INFO - Please connect your device into flashmode.
02/013/2012 12:13:54 - INFO - Device connected in flash mode
02/013/2012 12:13:54 - INFO - Opening device for R/W
02/013/2012 12:13:54 - INFO - Reading device information
02/013/2012 12:13:54 - INFO - Phone ready for flashmode operations.
02/013/2012 12:13:54 - INFO - Start Flashing
02/013/2012 12:13:54 - INFO - Flashing loader
02/013/2012 12:13:56 - INFO - Loader version : R4A066 / Bootloader status : ROOTED
02/013/2012 12:13:56 - INFO - Flashing adsp.sin
02/013/2012 12:13:59 - INFO - Flashing kernel.sin
02/014/2012 12:14:02 - INFO - Flashing amss_fs.sin
02/014/2012 12:14:02 - INFO - Flashing fota1.sin
02/014/2012 12:14:02 - INFO - Flashing fota0.sin
02/014/2012 12:14:03 - INFO - Flashing apps_log.sin
02/014/2012 12:14:03 - INFO - Flashing amss.sin
02/014/2012 12:14:12 - INFO - Flashing cache.sin
02/014/2012 12:14:13 - INFO - Flashing system.sin
02/016/2012 12:16:17 - INFO - Flashing userdata.sin
02/016/2012 12:16:19 - INFO - Flashing finished.
02/016/2012 12:16:19 - INFO - Please wait. Phone will reboot
02/016/2012 12:16:19 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
02/016/2012 12:16:19 - INFO - Device connected in flash mode
02/016/2012 12:16:21 - INFO - Device disconnected
02/016/2012 12:16:22 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
Note When you press the power button glows green LED intermittently and device does not work
Please help me
Raye2 said:
Telephone Mini Pro
Boot loader opened
Version 62 is installed
Who I got you update ota
After that turn off the device no longer works
Now the phone does not boot
Tested program FlashTool
Update and work efficiently but the device still does not work
This report flash Toole
Note When you press the power button glows green LED intermittently and device does not work
Please help me
Click to expand...
Click to collapse
Flash with Wotanserver and next time don't accept OTA updates with unlocked bootloader.
m4x23 said:
Flash with Wotanserver and next time don't accept OTA updates with unlocked bootloader.
Click to expand...
Click to collapse
Thx Man
but The attached file in the main post not fit my problem??
Because I am in my country I can not use this program Wotanserver
Because of the proxy server
try relock the bootloader,and then you can fix it over PC companion.
Raye2 said:
Thx Man
but The attached file in the main post not fit my problem??
Because I am in my country I can not use this program Wotanserver
Because of the proxy server
Click to expand...
Click to collapse
Unfortunatly flashing the .ftf file of main post didn't work for me
I've instantly unbricked the phone with Wotanserver...
My phone has been restored file attachment
Flash does not have to re-generate operating
But after the break cable usb lifting the battery and the back has been successfully reboot by power button
All thanks to you...
Many many thanks. You saved my live.
08/000/2012 21:00:42 - INFO - Selected Sk17a_4.1.B.0.431_Generic Trade US.ftf
08/000/2012 21:00:42 - INFO - Preparing files for flashing
08/001/2012 21:01:45 - INFO - Please connect your device into flashmode.
08/001/2012 21:01:51 - INFO - Device connected in flash mode
08/001/2012 21:01:51 - INFO - Opening device for R/W
08/001/2012 21:01:51 - INFO - Start Flashing
08/001/2012 21:01:51 - INFO - Flashing loader
08/001/2012 21:01:51 - INFO - Ending flash session
08/001/2012 21:01:51 - ERROR -
08/001/2012 21:01:51 - ERROR - Error flashing. Aborted
08/001/2012 21:01:52 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
Do you guy have any Idea to fixed this? :'(
i've try this and it's work,
but i disconnect the phone before flashing rom, etc.
i thought i could continue later. but when i try once again, it's not recognize in s1 mode ( volumekey press )
any idea how to make this phone flashable again,
this is the log, after finished i dosconnect the phone
Code:
04/001/2012 18:01:22 - INFO - Device connected in flash mode
04/001/2012 18:01:38 - INFO - Selected Xperia_2011_FreeXperia_ALL.ftf
04/001/2012 18:01:38 - INFO - Preparing files for flashing
04/001/2012 18:01:38 - INFO - Please connect your device into flashmode.
04/001/2012 18:01:39 - INFO - Opening device for R/W
04/001/2012 18:01:39 - INFO - Reading device information
04/001/2012 18:01:39 - INFO - Phone ready for flashmode operations.
04/001/2012 18:01:39 - INFO - Start Flashing
04/001/2012 18:01:39 - INFO - Processing loader
04/001/2012 18:01:39 - INFO - Checking header
04/001/2012 18:01:39 - INFO - Flashing data
04/001/2012 18:01:40 - INFO - Loader : S1_Loader_Root_773f - Version : R4A066 / Bootloader status : ROOTABLE
04/001/2012 18:01:41 - INFO - Flashing preset.ta
04/001/2012 18:01:41 - INFO - Writing TA unit : [00, 00, 08, FD, 00, 00, 00, 02, 00, 00]
04/001/2012 18:01:41 - INFO - Ending flash session
04/001/2012 18:01:41 - INFO - Flashing finished.
04/001/2012 18:01:41 - INFO - Please unplug and start your phone
04/001/2012 18:01:41 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
04/001/2012 18:01:41 - INFO - Device connected in flash mode
04/001/2012 18:01:47 - INFO - Log written to C:\Flashtool\flashtool_2012-09-04_05-56-21.log
thanks
Hello, I tried to unbrick my phone, but it doesn't work :/ Flashing is ok, but when I turn the phone it only vibrates and I can't do nothing. Please help me
That might be useful
[Q] Help with "ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";E RR_DYNAMIC="SIN head"
Can you guys please help me with this error that happens when i try to flash:
02/025/2012 11:25:35 - INFO - <- This level is successfully initialized
02/025/2012 11:25:35 - INFO - Flashtool Version 0.6.9.1 built on 2012-04-09 19:22:19
02/025/2012 11:25:35 - INFO - You can drag and drop ftf files here to start flashing them
02/025/2012 11:25:41 - INFO - Device disconnected
02/026/2012 11:26:02 - INFO - Selected X10_SE_2.6.29_DualRecovery.ftf
02/026/2012 11:26:02 - INFO - Preparing files for flashing
02/026/2012 11:26:02 - INFO - Please connect your device into flashmode.
02/026/2012 11:26:06 - INFO - Device connected in flash mode
02/026/2012 11:26:06 - INFO - Opening device for R/W
02/026/2012 11:26:07 - INFO - Reading device information
02/026/2012 11:26:07 - INFO - Phone ready for flashmode operations.
02/026/2012 11:26:07 - INFO - Start Flashing
02/026/2012 11:26:07 - INFO - Flashing loader
02/026/2012 11:26:07 - INFO - Ending flash session
02/026/2012 11:26:07 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
02/026/2012 11:26:07 - ERROR - Error flashing. Aborted
02/026/2012 11:26:07 - INFO - Device connected in flash mode
02/026/2012 11:26:09 - INFO - Device disconnected
02/026/2012 11:26:09 - INFO - Device connected in flash mode
Repair your X10 via SEUS PC Companion if you tried to / or have unlock(ed) your Bootloader.
If you haven't, unlock your Bootloader using one of the tutorials.
But i'd recommend checking if you can unlock with s1tool first.
Tekkpriest said:
Repair your X10 via SEUS PC Companion if you tried to / or have unlock(ed) your Bootloader.
If you haven't, unlock your Bootloader using one of the tutorials.
But i'd recommend checking if you can unlock with s1tool first.
Click to expand...
Click to collapse
I can't, after a few seconds on flash mode, the phone restarts... =/
dont worry
dude just open your seus....
there click support...->update phone->repair(written in red color) do as directed ....
then remove ur phone battery for 5 secs.... put it in... while pressing the back button and keeping it pressed... connect the usb cable to the phone.... voila it recognizes the phone and flashes it with default rom....
i semi bricked my phone a million times.... this always saved my ASS......
nt a complete NOOB now though:angel:
rohit25 said:
dude just open your seus....
there click support...->update phone->repair(written in red color) do as directed ....
then remove ur phone battery for 5 secs.... put it in... while pressing the back button and keeping it pressed... connect the usb cable to the phone.... voila it recognizes the phone and flashes it with default rom....
i semi bricked my phone a million times.... this always saved my ASS......
nt a complete NOOB now though:angel:
Click to expand...
Click to collapse
I've tried... didn't work... the green light on flash mode goes of after a few seconds and it reistarts... on both SEUS and flashtool....
when I google it it seems to always point me in the direction of bootloader problems .
ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ER R_DYNAMIC="SIN header verification failed"
'''''I tried to figure out what's causing this and I end up with the "locked bootloader solution". I tried the instructions read here: http://unlockbootloader.sonymobile.com/instructions but when I typed ##7378423## no service menu was available...
'''''
answers that helped solve related!
If you didn't already have your bootloader unlocked and tools in place to reload the Android operating system (ie, ROMs or disk images), I strongly suspected you are completely screwed.
You can install an OS from scratch on your phone, but you need a specialized environment and tools to do so and those are often proprietary and/or secret. It is far easier to load a disk image (ROM) than do a base install. Either way, part of the process is an unlocked bootloader so that you can boot into an environment/tool instead of the existing OS. If you don't have a way to boot into something besides the installed system and have pooched that system - generally the only way you as a consumer have available to hack the bootloader - then you're up the creek. – Logos Apr 6 at 12:34
so basicly there saying if you did not unlock bootloader and a way of booting OTHER then the system itself ... you bricked it ..
if you cant flash
cant use recovery
whats left ?
If this hasnt bin solved another person had the exact same problem and got it fixed it seemed to be driver related (pc wise)
Only other info i can share is he used wotan to repair wich requires a fee ...
Sent from my x10 using xda premium
This is what i could find
www.wotanserver.com/en/sony-ericsson/se/xperia-x10/unlock-tool/debranding-flash
Seus coukd not help him aswell phone would not stay in flash mode
Or look up his post an ask him personnaly
In Q&A aswell
Sent from my x10 using xda premium
Hi to all, do you have time? I cant figure out what is wrong with my x10. When i try to flash those Generic Stock Rom, i get to have errors flashing. It aborts sometime when flashing system.sin and other sin depending on the tft file... i dunno what version my phone is but my pc detects it with flashmode. When im using Seus, it fails flashing in about 90% of the process... when booting my phone, just a quick vibrate with green flashes once. Do u have skype account? Hope u have time and can help me. Most of the links in xda our outdated. And i know my phone is outdated too. Thanks and more power
I dunno if im bootloader locked but i bought this phone without any modding until now... nor root.... Pls help me
you can try downloading this Generic one from THeLogiC thread
http://www.mediafire.com/?vy4v24ditk4lsxa
extract it and try to flash it via latest flash tool
it worked with me when i was on locked bootloader - on a custom gb rom - and want to unlock it so i flashed that one, rooted it, and unlocked the bootloader ...
sorry for my english if it bad
i am just want to help
Islam Looca said:
you can try downloading this Generic one from THeLogiC thread
http://www.mediafire.com/?vy4v24ditk4lsxa
extract it and try to flash it via latest flash tool
it worked with me when i was on locked bootloader - on a custom gb rom - and want to unlock it so i flashed that one, rooted it, and unlocked the bootloader ...
sorry for my english if it bad
i am just want to help
Click to expand...
Click to collapse
Thanks Islam, im downloading it ryt now... ill keep you posted and pls help me again if i wasnt able to,
My Flashing Error, just now
Islam Looca said:
you can try downloading this Generic one from THeLogiC thread
http://www.mediafire.com/?vy4v24ditk4lsxa
extract it and try to flash it via latest flash tool
it worked with me when i was on locked bootloader - on a custom gb rom - and want to unlock it so i flashed that one, rooted it, and unlocked the bootloader ...
sorry for my english if it bad
i am just want to help
Click to expand...
Click to collapse
wahbufetz said:
Thanks Islam, im downloading it ryt now... ill keep you posted and pls help me again if i wasnt able to,
Click to expand...
Click to collapse
Error again
wahbufetz said:
Error again
Click to expand...
Click to collapse
does your phone opens normally so that you can allow unknown sources and usb debugging ? ... or not
did you installed drivers for the device from the setup folders of flashtool ??
what was the rom and baseband that you had before try flashing ??
I dont remember already what rom and baseband before, but i bought this phone without modding it until now.. and i cant boot the phone, not the triangle error on first screen, it just flash red and vibrates once when i press the power button...
I keep having this error when flashing...
I also installed alreasy all drivers, as well as java environment... But still
ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Block verification failed";
BLOCK VERIFICATION FAILED to all stock roms available for dload for x10
13/002/2013 21:02:39 - INFO - Opening device for R/W
13/002/2013 21:02:39 - INFO - Reading device information
13/002/2013 21:02:39 - INFO - Phone ready for flashmode operations.
13/002/2013 21:02:39 - INFO - Start Flashing
13/002/2013 21:02:39 - INFO - Flashing loader
13/002/2013 21:02:40 - INFO - Loader : S1_Loader_Root_f851 - Version : R4A024 / Bootloader status : UNROOTABLE
13/002/2013 21:02:40 - INFO - Flashing kernel.sin
13/002/2013 21:02:45 - INFO - Flashing fota1.sin
13/002/2013 21:02:46 - INFO - Flashing fota0.sin
13/002/2013 21:02:46 - INFO - Ending flash session
13/002/2013 21:02:46 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Block verification failed";
13/002/2013 21:02:46 - ERROR - Error flashing. Aborted
13/002/2013 21:02:47 - INFO - Device connected in flash mode
13/002/2013 21:02:48 - INFO - Device disconnected
13/002/2013 21:02:49 - INFO - Device connected in flash mode
13/002/2013 21:02:51 - INFO - Device disconnected
13/002/2013 21:02:53 - INFO - Device connected in flash mode
13/002/2013 21:02:54 - INFO - Device disconnected
13/003/2013 21:03:04 - INFO - Selected X10i_3.0.1.G.0.75_1241-1846.ftf
13/003/2013 21:03:04 - INFO - Preparing files for flashing
13/003/2013 21:03:18 - INFO - Please connect your device into flashmode.
13/003/2013 21:03:24 - INFO - Device connected in flash mode
13/003/2013 21:03:25 - INFO - Opening device for R/W
13/003/2013 21:03:25 - INFO - Reading device information
13/003/2013 21:03:25 - INFO - Phone ready for flashmode operations.
13/003/2013 21:03:25 - INFO - Start Flashing
13/003/2013 21:03:25 - INFO - Flashing loader
13/003/2013 21:03:26 - INFO - Loader : S1_Loader_Root_f851 - Version : R4A024 / Bootloader status : UNROOTABLE
13/003/2013 21:03:26 - INFO - Flashing system.sin
13/003/2013 21:03:27 - INFO - Ending flash session
13/003/2013 21:03:27 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Block verification failed";
13/003/2013 21:03:27 - ERROR - Error flashing. Aborted
13/003/2013 21:03:27 - INFO - Device connected in flash mode
13/003/2013 21:03:28 - INFO - Device disconnected
13/003/2013 21:03:30 - INFO - Device connected in flash mode
13/003/2013 21:03:30 - INFO - Device disconnected
i think you should try old version of flash tool ... that already worked with me when flashing stock rom...
http://azuzu.spice.net.au/tools/X10_GB_Root/FlashTool_0.2.9.1-GBready_root_xRec.exe
you should try this stock one too with that flashtool
http://www.4shared.com/file/-4NS5SuD/x10_23_aro.htm
and make sure your battery is charged at least 50% before flashing ... maybe it was part of the problem ... try a desktop charger or something like that
Tried older versions of the flashtool already, .5.3m .7.1.0, .8.6.0 and the latest .9.10.1, but still the same Block Ver Failed...
But then i will try the links uve given me and try to do it....
I think my batterry if full cozwhenever i put my battery its green Led, i use external charger to do it coz i think my phone doesnt charge it, the green led always disappear when charging on the wall outlet...
Question. Can i really flash anything, i mean x10 Stock roms even when it is not rooted and have Locked Bootloader? When i am flashing there is none to be ticked on the options like excluding kernel? baseband? fota? and the like?
Thanks
yes only official stock generic or stock branded roms can be flashed via flash tool, dont tick any option to exclude anything you must install complete ftf file without excluding anything , the root comes after you flashed the stock rom in order to install a recovery like xRecovery on Locked Bootloader to install GB custom roms based on stock via xRecovery, or you can unlock the bootloader and install GB, ICS and JB roms via CWM recovery
Islam Looca said:
yes only official stock generic or stock branded roms can be flashed via flash tool, dont tick any option to exclude anything you must install complete ftf file without excluding anything , the root comes after you flashed the stock rom in order to install a recovery like xRecovery on Locked Bootloader to install GB custom roms based on stock via xRecovery, or you can unlock the bootloader and install GB, ICS and JB roms via CWM recovery
Click to expand...
Click to collapse
OK sir, understood about that...
When i try to flash stock roms that i downloaded from xda, i get the errors on different lines , sometimes on fota0.sin, sometimes system.sin, it changes everytime depending on what stock rom i flash, the error is the same BLOCK VERIFICATION FAILED.
I tried this also, but still no luck
http://www.youtube.com/watch?v=nbVdyoeO9V8
....
I tried other computers here also, niether XP, Windows 8 and this Win7 but still the same... Linux? i dunno how to install there...... Stil BLOCK VERIFICATION FAILED.... .. i THINK ill gonna give up...
mmm... download s1tool
http://forum.xda-developers.com/attachment.php?attachmentid=718432&d=1315921227
and post results from s1tool to see the bootloader if it locked or unlocked
Welcome to S1 tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A031"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_3.0.1.G.0.75
CUSTOM VERSION: 1237-0334_R2C
FILESYSTEM VERSION: WORLD-1-4-8_3.0.1.G.0.75
SERIAL NO: CB511TS1M4
SEMC SIMLOCK CERTIFICATE
Elapsed:6 secs.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A031"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "002C/00B3"
LOADER VERSION: "R4A024"
MODEL (from GDFS): X10i
SOFTWARE VERSION: 1227-4612_3.0.1.G.0.75
CUSTOM VERSION: 1237-0334_R2C
FILESYSTEM VERSION: WORLD-1-4-8_3.0.1.G.0.75
SERIAL NO: CB511TS1M4
SEMC SIMLOCK CERTIFICATE
Elapsed:7 secs.
I tried the latest ftf file uve told me sir, but then still the same error... i installed back the latest flashtool and:
14/000/2013 09:00:27 - INFO - Selected x10_2.3_aro.ftf
14/000/2013 09:00:27 - INFO - Preparing files for flashing
14/000/2013 09:00:33 - INFO - Please connect your device into flashmode.
14/000/2013 09:00:36 - INFO - Device connected in flash mode
14/000/2013 09:00:36 - INFO - Opening device for R/W
14/000/2013 09:00:36 - INFO - Reading device information
14/000/2013 09:00:36 - INFO - Phone ready for flashmode operations.
14/000/2013 09:00:36 - INFO - Start Flashing
14/000/2013 09:00:36 - INFO - Flashing loader
14/000/2013 09:00:37 - INFO - Loader : S1_Loader_Root_f851 - Version : R4A024 / Bootloader status : UNROOTABLE / IMEI : 01259000654649
14/000/2013 09:00:37 - WARN - This file is ignored : simlock.ta
14/000/2013 09:00:37 - INFO - Flashing kernel.sin
14/000/2013 09:00:38 - INFO - Ending flash session
14/000/2013 09:00:38 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="MEMORY_CLASS";ERR_STATIC="HASH_VER";ERR_DYNAMIC="Block verification failed";
14/000/2013 09:00:38 - ERROR - Error flashing. Aborted
14/000/2013 09:00:38 - INFO - Device connected in flash mode
14/000/2013 09:00:39 - INFO - Device disconnected
14/000/2013 09:00:40 - INFO - Device connected in flash mode
14/000/2013 09:00:41 - INFO - Device disconnected
ok seems that your bootloader is locked ...
Try to remove and insert back the battery until the green light is on ... with usb cable connected to the pc.... then try flashing again
if it gives same error try SEUS
http://www.sonymobile.com/gb/tools/update-service/
this is the last thing you must do ... if it gives same error too
then it could be your flash ic problem or any other hardware problem ...
i hope you can make it ..
Sad to say Islam, that is the first thing i did... Installed the PCC and the SEUS, update it there but still flashing error... one time it reaches about 90%, and then fail...
If then that it is my IC Problem inside, do u think SE will replace it? or others say it must be the USB port broken....
you said you tried flashtool on win7 and 8
what about trying SEUS on XP 32bit maybe it might work ... you should try
after that if it fails try to flash a Froyo 2.1 stock rom it maybe works with you then you can root it and install custom GB roms
http://www.mediafire.com/?sqv6274anzfzn2x
Islam Looca said:
you said you tried flashtool on win7 and 8
what about trying SEUS on XP 32bit maybe it might work ... you should try
after that if it fails try to flash a Froyo 2.1 stock rom it maybe works with you then you can root it and install custom GB roms
http://www.mediafire.com/?sqv6274anzfzn2x
Click to expand...
Click to collapse
I have tried XP brother, without java installed, but the same has errors... I had that 2.1 also, still had errors ( ( :crying::crying::crying::crying::crying:
See attached image, these are the roms i have tried...
Hello, guys !
My old Sony Ericsson x10 stopped working 4 months ago and back then I tried everything I could think of to fix it myself, without luck though. Today I decided to give it another last try. I think the phone just shat down by itself back then, but sadly I don't remember much of the details. I was using Advanced Xperia X10i ROM and it was working fine, I didn't get any errors during the flashing or while I was running it. And yes, the phone was rooted / with unlocked bootloader.
When I press the power button the phone vibrates for half a sec or less and that's it, the screen doesn't light up or anything. When I connect the phone to a charger or PC the green light comes on, I haven't seen it turn red so far.
This is the s1tool log I get when I 'identify' the phone.
RUNNING S1_EROM VER "r8A033"
SOFTWARE AID: FFFF
LOADER AID: DEAD
FATAL ERROR [ SECURITY_CLASS, SIN_header_verification_failed ]
error while uploading HDR block
LOADER NOT STARTED
Elapsed:13 secs.
When I try to flash stock or any firmware with flashtool I get an error too.
05/055/2013 12:55:08 - INFO - Preparing files for flashing
05/055/2013 12:55:08 - INFO - Please connect your device into flashmode.
05/055/2013 12:55:15 - INFO - Device connected in flash mode
05/055/2013 12:55:15 - INFO - Opening device for R/W
05/055/2013 12:55:15 - INFO - Reading device information
05/055/2013 12:55:15 - INFO - Phone ready for flashmode operations.
05/055/2013 12:55:15 - INFO - Start Flashing
05/055/2013 12:55:15 - INFO - Processing loader
05/055/2013 12:55:15 - INFO - Device loader has not been identified. Using the one from the bundle
05/055/2013 12:55:15 - INFO - Checking header
05/055/2013 12:55:15 - INFO - Ending flash session
05/055/2013 12:55:15 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
So I cannot flash any firmware or enter recovery mode because the phone doesn't turn on.
It seems the problem comes from that 'sin header' , whatever that is. I noticed that flashtool has a Sin Editor in the Tools, but I have no idea what to do with that.
I've seen 30+ posts with the same "SIN header verification failed" problem but I didn't find a solution in them, that's why I'm asking.
Bump. By the way, SEUS says I'm running the latest version so it doesn't help either.
razor_BUL said:
Bump. By the way, SEUS says I'm running the latest version so it doesn't help either.
Click to expand...
Click to collapse
did u fix it b5y any chance? i have the same problem
Relock your bootloader and then try to flash stock ftf
Sent from my MT11i using xda app-developers app
I have same your problem
please help us
pleeeeeeeeeeeeeeaaaaaaaaaaaase
razor_BUL said:
Hello, guys !
My old Sony Ericsson x10 stopped working 4 months ago and back then I tried everything I could think of to fix it myself, without luck though. Today I decided to give it another last try. I think the phone just shat down by itself back then, but sadly I don't remember much of the details. I was using Advanced Xperia X10i ROM and it was working fine, I didn't get any errors during the flashing or while I was running it. And yes, the phone was rooted / with unlocked bootloader.
When I press the power button the phone vibrates for half a sec or less and that's it, the screen doesn't light up or anything. When I connect the phone to a charger or PC the green light comes on, I haven't seen it turn red so far.
This is the s1tool log I get when I 'identify' the phone.
RUNNING S1_EROM VER "r8A033"
SOFTWARE AID: FFFF
LOADER AID: DEAD
FATAL ERROR [ SECURITY_CLASS, SIN_header_verification_failed ]
error while uploading HDR block
LOADER NOT STARTED
Elapsed:13 secs.
When I try to flash stock or any firmware with flashtool I get an error too.
05/055/2013 12:55:08 - INFO - Preparing files for flashing
05/055/2013 12:55:08 - INFO - Please connect your device into flashmode.
05/055/2013 12:55:15 - INFO - Device connected in flash mode
05/055/2013 12:55:15 - INFO - Opening device for R/W
05/055/2013 12:55:15 - INFO - Reading device information
05/055/2013 12:55:15 - INFO - Phone ready for flashmode operations.
05/055/2013 12:55:15 - INFO - Start Flashing
05/055/2013 12:55:15 - INFO - Processing loader
05/055/2013 12:55:15 - INFO - Device loader has not been identified. Using the one from the bundle
05/055/2013 12:55:15 - INFO - Checking header
05/055/2013 12:55:15 - INFO - Ending flash session
05/055/2013 12:55:15 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
So I cannot flash any firmware or enter recovery mode because the phone doesn't turn on.
It seems the problem comes from that 'sin header' , whatever that is. I noticed that flashtool has a Sin Editor in the Tools, but I have no idea what to do with that.
I've seen 30+ posts with the same "SIN header verification failed" problem but I didn't find a solution in them, that's why I'm asking.
Click to expand...
Click to collapse
Did u manage to repair it as it seems very similar problem to mine. After I connect wall charger it turns green but cant turn it on, seus or flashtool doesnt recognize my phone, pc cant connect due to usb malfuncion..phone is just dead, plz help if you got solution. thanks