I recently downloaded and flashed my Qmobile A10 with this ROM http://forum.xda-developers.com/showthread.php?t=2160609
And after flashing it I had a RAVEN ROM first which was getting stuck at boot logo. Even after the flashing I get to see the RAVEN ROM boot logo and then I see the Canvas(The ROM I installed) boot animation.
Problem is that I don't get signals. They keep dropping.
Further more I don't get to go to recovery again. Everytime I try it just factory resets the mobile
I tried going to Recovery mode by:
1) Holding Vol UP + Vol Down + Power Button > Vol Up
2) Mobile Uncle Tools again
3) ROM Manager
4) Terminal Emulator
5) Some flashbit.bat file I found for my phone
6) SP Flash Tools
All give the same result that my phone is factory reset. Except SP Flash, even after installing drivers it prompts that the drivers may not be installed and a USB error 8100.
Please guide me with a proper solution.
Buddy it is a serious problem. The best Solution I could give you is to either post this issue Micromax Canvas A110 q&a thread present in legacy devices or Customer service center for which you will have revert to stock rom.
Sent from my GT-i9103 using xda app-developers app
EddChang said:
I recently downloaded and flashed my Qmobile A10 with this ROM http://forum.xda-developers.com/showthread.php?t=2160609
And after flashing it I had a RAVEN ROM first which was getting stuck at boot logo. Even after the flashing I get to see the RAVEN ROM boot logo and then I see the Canvas(The ROM I installed) boot animation.
Problem is that I don't get signals. They keep dropping.
Further more I don't get to go to recovery again. Everytime I try it just factory resets the mobile
I tried going to Recovery mode by:
1) Holding Vol UP + Vol Down + Power Button > Vol Up
2) Mobile Uncle Tools again
3) ROM Manager
4) Terminal Emulator
5) Some flashbit.bat file I found for my phone
6) SP Flash Tools
All give the same result that my phone is factory reset. Except SP Flash, even after installing drivers it prompts that the drivers may not be installed and a USB error 8100.
Please guide me with a proper solution.
Click to expand...
Click to collapse
Can you connect your phone to PC in DFU mode?
If yes theres still hope, in recovering.
Did you find the solution? If so please post.
I am in the same condition after buying the used phone.
Related
Hi Friends,
My Karbonn A30 has bricked. I did so many experiment on my phone and also stucked several time with some problem but i did solved that problems. Unfortunately this time i am helpless with my phone.Now i am going to explain you what i did with my phone and what problem i am facing.
NOTE: My phone was rooted by using "Root_with_Restore_by_Bin4ry_v18" process.
Two days back i flashed TITAN MOBILE ROM in my Karbonn A30 but that was unsuccessful,After that my phone was not able to boot and also it was not able to boot in recovery mode using Volume up + Power key. Then with some R&D i get a new option using Volume Down + Power key that option is for my mobile hardware test. In that option i formatted my "emmc" then after my phone was able boot in CWMR recovery mode.Then i wiped my all data and system using CWM Recovery,Also did Restore factory.
After that i was regularly getting error message on my phone notification " Phone storage corrupted,Format it" Then i formatted that. Then i installed my all apps from by apps_backup. When i rebooted my phone,again i was getting same error message and didn't any option except format it.
Then i decide to check this error after unrooting my phone. So i remove root access. After that i was not getting this error.
Yesterday again i rooted it with same process and again i was getting same error message after installing apps and reboot my phone.
then i decided to flash new rom with same company phone(Karbonn). So i got ROM for Karbonn S5 from google. I flashed that successfully on my phone i was very happy because this rom was having Jellybean OS(4.1.2). But after some time apps started crashing when i logged in my phone using my gmail as usual i did after every factory reset.
Then i re-flashed the same rom(Karonn S5). This time i decided to do factory reset using phone setting before loggin in google account.
That was my blunder mistake. After pressing factory reset my phone got stuck in boot screen.
Then i tried same option to solve it (Volume down + power ) so i can format emmc again to resolve it. But this time after formatting emmc i was in the same condition on boot looping.
I am not able to go in recovery option using my phone key.
I need you help, i can not go service center because i voided my warranty.
NOTE: Currently my phone is not rooted,I checked it using ADB commands. My USB DEBUGGING is showing on but when i put my phone in" phone hardware check mode( using Volume Down + Power key)".
Plz HELP ME TO SOLVE IT.
djhot143 said:
Hi Friends,
My Karbonn A30 has bricked. I did so many experiment on my phone and also stucked several time with some problem but i did solved that problems. Unfortunately this time i am helpless with my phone.Now i am going to explain you what i did with my phone and what problem i am facing.
NOTE: My phone was rooted by using "Root_with_Restore_by_Bin4ry_v18" process.
Two days back i flashed TITAN MOBILE ROM in my Karbonn A30 but that was unsuccessful,After that my phone was not able to boot and also it was not able to boot in recovery mode using Volume up + Power key. Then with some R&D i get a new option using Volume Down + Power key that option is for my mobile hardware test. In that option i formatted my "emmc" then after my phone was able boot in CWMR recovery mode.Then i wiped my all data and system using CWM Recovery,Also did Restore factory.
After that i was regularly getting error message on my phone notification " Phone storage corrupted,Format it" Then i formatted that. Then i installed my all apps from by apps_backup. When i rebooted my phone,again i was getting same error message and didn't any option except format it.
Then i decide to check this error after unrooting my phone. So i remove root access. After that i was not getting this error.
Yesterday again i rooted it with same process and again i was getting same error message after installing apps and reboot my phone.
then i decided to flash new rom with same company phone(Karbonn). So i got ROM for Karbonn S5 from google. I flashed that successfully on my phone i was very happy because this rom was having Jellybean OS(4.1.2). But after some time apps started crashing when i logged in my phone using my gmail as usual i did after every factory reset.
Then i re-flashed the same rom(Karonn S5). This time i decided to do factory reset using phone setting before loggin in google account.
That was my blunder mistake. After pressing factory reset my phone got stuck in boot screen.
Then i tried same option to solve it (Volume down + power ) so i can format emmc again to resolve it. But this time after formatting emmc i was in the same condition on boot looping.
I am not able to go in recovery option using my phone key.
I need you help, i can not go service center because i voided my warranty.
NOTE: Currently my phone is not rooted,I checked it using ADB commands. My USB DEBUGGING is showing on but when i put my phone in" phone hardware check mode( using Volume Down + Power key)".
Plz HELP ME TO SOLVE IT.
Click to expand...
Click to collapse
Problem has been solved but i am very much unhappy with XDA forum because i am not getting any solution from XDA about my Karbonn A30.
karbon a30 unbrick
djhot143 said:
Problem has been solved but i am very much unhappy with XDA forum because i am not getting any solution from XDA about my Karbonn A30.
Click to expand...
Click to collapse
I think you need so flash tool of mtk download it and install mtk vcom drivers of your phone in PC And download twrp recovery of cherry mobile titan TV download it you need scatter loading file I can give you links of all above files and full procedure when you download twrp recovery select scatter file in so flash tool and untick all only tick recovery click on recovery and select twrp recovery when you done all things you can pull out your phone battery and disconnect USB pull out the battery some seconds and replace it and connect usb and press f9 and recovery will flash then I will give you nandroid backup okk
---------- Post added at 08:14 AM ---------- Previous post was at 08:09 AM ----------
prince khurana said:
I think you need so flash tool of mtk download it and install mtk vcom drivers of your phone in PC And download twrp recovery of cherry mobile titan TV download it you need scatter loading file I can give you links of all above files and full procedure when you download twrp recovery select scatter file in so flash tool and untick all only tick recovery click on recovery and select twrp recovery when you done all things you can pull out your phone battery and disconnect USB pull out the battery some seconds and replace it and connect usb and press f9 and recovery will flash then I will give you nandroid backup okk
Click to expand...
Click to collapse
the link of mtk drivers: forum.gsmhosting.com/vbb/f457/how-install-mtk-driver-windows-xp-vista-7-a-1662956/
signature verification problem
sir,
i also try this ROM in my karbonn a30 ..and also new 4.2 rom
but i got error message
E: signature verification failed
installation aborted.
please tell me how to solve it
my process
i rooted my mobile
power + volume up
then update rom from sd card
update....
E: signature verification failed
installation aborted.
error
plz help me
djhot143 said:
Problem has been solved but i am very much unhappy with XDA forum because i am not getting any solution from XDA about my Karbonn A30.
Click to expand...
Click to collapse
bro i have rooted my Karbonn A30.while changing the font it will restart and now its only showing boot screen plz help me what can i do??
fix
patilprashant777 said:
bro i have rooted my Karbonn A30.while changing the font it will restart and now its only showing boot screen plz help me what can i do??
Click to expand...
Click to collapse
reflash the stock rom
or do factory reset
Hi,
I'm pretty new to Android. I recently rooted my phone (Huawei Ascent Y511 U30) using Framaroot and it worked perfectly after reboot. Then I tried to install Sinhalese fonts using Sinhala Fonts Installer and after installing that, I uninstalled the app before restarting. Then I restarted the phone and it get stuck at the Huawei Logo and will not boot into launcher.
I tried to hard reset by going to recovery mode using Power + (vol up + vol down). (Fortunately I can go into the recovery mode.) Even if I factory reset the phone, the same situation is there. And some articles said to log in to fast boot mode by Power + Vol down, but it doesn't work and just boots into that Huawei logo.
As I read, to install a custom ROM, ClockWork Recovery has to be used, but I can't do it since I can't log into my phone.
Please help me on this. What has gone wrong? Is there any way I can make my phone alive? Or at least, is there any way that I can install ClockWork Recovery without booting into my phone, just using my SD card?
Thank you in advance..!!
gnomezgrave said:
Hi,
I'm pretty new to Android. I recently rooted my phone (Huawei Ascent Y511 U30) using Framaroot and it worked perfectly after reboot. Then I tried to install Sinhalese fonts using Sinhala Fonts Installer and after installing that, I uninstalled the app before restarting. Then I restarted the phone and it get stuck at the Huawei Logo and will not boot into launcher.
I tried to hard reset by going to recovery mode using Power + (vol up + vol down). (Fortunately I can go into the recovery mode.) Even if I factory reset the phone, the same situation is there. And some articles said to log in to fast boot mode by Power + Vol down, but it doesn't work and just boots into that Huawei logo.
As I read, to install a custom ROM, ClockWork Recovery has to be used, but I can't do it since I can't log into my phone.
Please help me on this. What has gone wrong? Is there any way I can make my phone alive? Or at least, is there any way that I can install ClockWork Recovery without booting into my phone, just using my SD card?
Thank you in advance..!!
Click to expand...
Click to collapse
My understanding is that being on that screen @ the logo IS fastboot mode. See if the PC Suite can get you back up and running: http://www.downloads.techdiscussion.in/smartphones/huawei-ascend-y511-pc-suite-and-usb-driver/
The reason a factory reset doesn't help in this situation is that you made a change to /system which isn't much affected when you wipe factory data which is /data partition.
Huawei Y511-U30 stuck at boot logo
I am facing a problem with huawei y511-u30, i have rooted my fone nearly 3 weeks ago with framaroot, every thing was working fine after reboot , i have installed many app, upto 3 weeks the fone was working absolutely fine and now suddenly it stuck at boot logo. my fone automatically turned off in night and turn On again in d morning with "scheduled power ON/Off" options in d setting. today when a wakeup i saw only boot logo.
i removed d battery and tried to restart but i could not, i can't go into recovery, when i press volume (-) and power button or vol (+) and power it stucks on same boot logo,
when i charge the mobile in power OFF mode it doesnot show battery indicator it again starts and stuck on boot logo "Huawei ASCEND"
it has default recovery 3e
any one plz help
problem is solved by updating firmware available on internet
well,,I'm not a developer so I'm not sure if what I'm about to say is going to work, but I have a full backup of my ascend y511-u30 I wonder if you can use my system.img backup and flash it with sp flashtool to recover your phone..
If you get this confirmed by any developer or wanna give it a try yourself you just tell me and I'll send you the files right away
Ahmed Hesham said:
well,,I'm not a developer so I'm not sure if what I'm about to say is going to work, but I have a full backup of my ascend y511-u30 I wonder if you can use my system.img backup and flash it with sp flashtool to recover your phone..
If you get this confirmed by any developer or wanna give it a try yourself you just tell me and I'll send you the files right away
Click to expand...
Click to collapse
You mean by STOCK ROM backup or just phone data?
---------- Post added at 10:58 PM ---------- Previous post was at 10:54 PM ----------
trm33 said:
I am facing a problem with huawei y511-u30, i have rooted my fone nearly 3 weeks ago with framaroot, every thing was working fine after reboot , i have installed many app, upto 3 weeks the fone was working absolutely fine and now suddenly it stuck at boot logo. my fone automatically turned off in night and turn On again in d morning with "scheduled power ON/Off" options in d setting. today when a wakeup i saw only boot logo.
i removed d battery and tried to restart but i could not, i can't go into recovery, when i press volume (-) and power button or vol (+) and power it stucks on same boot logo,
when i cahrge the mobile in power OFF mode it doesnot show battery indicator it again starts and stuck on boot logo "Huawei ASCEND"
it has default recovery 3e
any one plz help
problem is solved by updating firmware available on internet
Click to expand...
Click to collapse
Do you mind explainig about firmware and rom?? I don't get it. Firmware=android version updare or full stock rom? Like I'm using 4.2.2!!.. I don't know much and sorry about my english.
Would like to try the application please send it, you can mail me on [email protected]
Guys it happened to me tooo...and i fixed it...all u have to do is download sp flashtool(google for it)...and google for a stock rom for huawei y511...(sorry i can't upload the files because i'm on a data block)...download sp flashtool and install it and open it...choose the scatter file inside the rom and some files will load to the app select only the recovery file and click the download button...connect your phone to the pc pressing the vol down button..it will flash the recovery to your phone...then boot into cwm recovery of your phone and flash a custom rom...(obviously u have to download one...after that u can change back to stock if you like)...
help plzzz
Help plzzz!
My Huawei Y511 U10 is not booting Can You Help Me To Fix It And if You Have a Rom OF Your Huawei Y511 U10 Plsss Upload It And Give Me The Link
Hi, all
I was running kitkat on my tablet so I decided to flash with CM13 custom rom I used DP TOOLS to rooted my tablet after that I used Flashify to installed TWRP at that point everything were nice and happy, then I installed gapps-600-base-20151112-1-signed.zip, cm-13.0-20160604-NIGHTLY-v410.zip, BETA-SuperSU-v2.74-2-20160519174328.zip using TWRP at that point everything installed without any error, I rebooted the tablet and now its stuck to LG logo with "error boot certification verify" after pressing power and volume up button I was able to get in download mode, but DP tools doesn't recognized tablet using my PC so I'm wondering how to installed rom back again since I cant get TWRP to load and why am I get this "error boot certification verify" anyway. Any help will be very helpful. Thanks
i fixed it using these steps, Thanks
1. You will need the Stock Rooted ROM: [ROM][STOCK](V410 ONLY)KOT49I.V4101d | 4.4.2… | LG G Pad 10.1 | XDA Forums
2. Stock Recovery Image: https://onedrive.live.com/redir?resi...int=file,img
[OPTIONAL]
- I downloaded the USB Driver suite so I can make sure it all connects and works, this really is optional, but I would HIGHLY suggest it!
LG Software & Firmware | LG U.S.A
- I also download this nifty tool called DP Tools by danielpinto8zz6 over at XDA. This just made it a lot easier to reboot to recovery and all that fun stuff.
[Tool][Win] DP TOOLS - Manage your LG device | LG G Pad 10.1 | XDA Forums
[MANUAL RECOVERY]
If you do not want to install the drivers and DP Tools, you can reboot to recovery using the following method:
1. Power OFF your device and unplug from USB
2. Press Vol-Down + Power and HOLD until you see the LG Logo (will only take a couple seconds)
3. Let go of the POWER button ONLY
4. Keep holding the Vol-Down, then also press Power + Vol-Up (so you should now be holding ALL 3 BUTTONS)
5. Wait for recovery mode to start and you can let go of the buttons
[THE PROCESS]
1. Copy the ROM and Recovery Image to to SD Card or Internal Storage of your device
2. Reboot to Recovery
3. Wipe, Wipe, Wipe
4. Flash the Stock Rooted ROM
5. Reboot and set up your device far enough for you to get into the Play Store and download an App
6. Download Flashify: https://play.google.com/store/apps/d...llner.flashify
7. Launch the app and flash your stock recovery
8. DO NOT REBOOT YET (however, if you do reboot, it's really not an issue)
9. Open the Super User app that is already installed
10. Go into Settings and then find the In-Root (Uninstall) option and you will get a warning that Root will be removed
11. Complete the instructions on the screen and you are now back to stock
[TROUBLESHOOTING]
- If SU will not uninstall and just hangs, restart the device and try again
- If the ROM starts acting strange, Factory Restore (this did not happen to me, but happened to a friends and reset fixed it all)
Please let me know if anyone has any questions!!
Thanks!
Quick reply to this message Reply
zfk110 said:
Hi, all
I was running kitkat on my tablet so I decided to flash with CM13 custom rom I used DP TOOLS to rooted my tablet after that I used Flashify to installed TWRP at that point everything were nice and happy, then I installed gapps-600-base-20151112-1-signed.zip, cm-13.0-20160604-NIGHTLY-v410.zip, BETA-SuperSU-v2.74-2-20160519174328.zip using TWRP at that point everything installed without any error, I rebooted the tablet and now its stuck to LG logo with "error boot certification verify" after pressing power and volume up button I was able to get in download mode, but DP tools doesn't recognized tablet using my PC so I'm wondering how to installed rom back again since I cant get TWRP to load and why am I get this "error boot certification verify" anyway. Any help will be very helpful. Thanks
Click to expand...
Click to collapse
just flash ur stock rom
Hello all,
First of all, as a disclaimer: I am a total noob in this area. I just got my Ulefone T1, and tried to root it by installing TWRP and then installing SuperSU using TWRP. When I first installed TWRP, it worked and I got into the TWRP recovery menu. However, as the phone had to be wiped, I couldn't install the SuperSU zip anymore. I did a normal reboot to transfer the SuperSU zip to my phone, but when I then tried to turn my phone off and access TWRP, it went to normal recovery mode of my phone. As I wanted to start fresh off again, I went to the settings of my phone and did a factory reset silly.
Now, it is stuck in a bootloop where I can literally do nothing. I cannot access factory mode or recovery mode, all it does is just endlessly boot and turn off. I have managed to turn it off completely, but that's all I can do. Also, the battery is not removable.
Does anyone with a little more knowledge have a suggestion for me? Thanks in advance!
As an update, I got a suggestion to fully drain the battery, but that does not work either. I have tried connecting it to my PC, which is not working, but that was acting weird before. I guess it's just not possible?
did you work this out ? i am stuck in bootloop too ??????
Daviesjosh95 said:
did you work this out ? i am stuck in bootloop too ??????
Click to expand...
Click to collapse
I have no idea what software is necessary to do it for your device but you can flash stock rom, if it uses sp tool or something then download stock rom, use sp tool to flash it. Should be OK after that. As I am not familiar with this device I can't give you any other advice other than flashing stock rom.
Any solutions to unbricking/boot looping?
Have anyone found any solutions to unbricking phone??
Mine also did bootlooping after unlocking bootloader.
I was able to flash successfully but screen fussy and unreadable and not able to touch. I am able to hear but lines are on screen.
I have same problem, please, anyone help, I think I used wrong twrp image
Ulefone T1 Bootloop solution 2019.
I was able to fix the bootloop of my ulefone t1, just flash it with sp flash tool by following this guide:
1. Download the Stock Firmware on your personal computer.
2. Install the USB MTK Drivers (skip if you have it already installed).
3. Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
4. Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
5. Select the Scatter File from the extracted Stock Firmware on your computer.
6. Select the Download Only in the SP flash tool option
7. Click the Download button to start the Formating process.
8. Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
9. Patiently wait for your device to be formatted.
10. After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
11. Unplug your device and boot it up.
12. If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
13. Voila, you are all good.
Very important step 8 of the guide.
Problem:
1.I had Resurrection Remix rom 7.1.2 installed with TWRP.
2. Tried to Install stock rom and stock recovery. Was able to install stock recovery but it was hanging in recovery. Could not move with volume buttons.
3. Then I tried flashing fastboot roms through miflashtool. Flashing was done successfully but nothing happens. It is now stuck on MI logo.
4. Mi logo only(No powered by android below or anything) It just restarts.
5. Cant go to recovery by any means tried everything.
6. Can only go to fastboot.
7. Adb does not detect device tried to install multiple times.
8. Cannot switch on Usb debuging since tablet wont boot even once.
9. I have no means to flash recovery as well.
Please help.
Have you found any solution
I am looking for a solution facing similar problem
I am looking for a solution facing a similar problem. Any help will be appreciated. I am able to reach fastboot and sun boot as well as recovery command successfully with twrp iso. but twrp is not loading after reboot and also trying to press vol up and power buttons.
chandidas said:
Have you found any solution
Click to expand...
Click to collapse