HTC Radar
PI06100
Hello,everyone.
Because not English, expression may have errors, please forgive me.
I have some questions to consult you. It will be great if you can spare time to help me.
At first, I installed SPL-2.05 and HSPL2.05 so that I could use the ROM of xda.
But later, I wanted to change it into the ROM of Asia & Pacific. However, I forgot to erase OSPL and
directly loaded SPL-1.9.160015.3.
Now, when I want to copy / load SPL-1.9.160015.3, it flashes and then disappeares.
And it fails to erase / copy the ROM of Asia & Pacific. Actually, it quits and backs to the screen where
you can check your SPL after loading for only just one or two seconds.
The same problem exists when I erase / copy SPL-2.05 with data connection or my memory card.
I have tested many times and found that the data connection works well and I have replaced many kinds of
memory cards ---- 512M,1G,2G,4G, but it still fails to erase / copy / load SPL again.
I would like to listen to your advice.
Thanks a lot for helping me out of the trouble.
Related
Hi folks,
I've really been trying to find the information I'm asking for. So please just tell me if my questions have been asked before
I'm using the unbranded Tytn with Eplus (ger). The device itself works and I wouldn't change anything about the software if it wasn't for Active Sync. I sometimes have to end it with the Task Manager and start it again before it will sync anything. He doesn't even connect to the Exchange server. Sometimes there's the message "waiting for network" (or similar, own translation). Sometimes there simply NO message at all (where he usually says "looking for changes", etc.
Finally he claims the host is unreachable - other applications (Pocket IE, e.g.) don't see a problem getting their packets out.
This is great with Push Mail. As far as I can say he gets his problems when I'm moving (driving car, even when going to the other side of a building): He changing the cell phone masts. He loses his connection and is uncapable of regaining it.
Does anyone know this problem? And if, is it fixed by any update? I'd say since it seems to be an application-only problem upgrading the windows rom should be enough, shouldn't it?
And how can I use the rom from Vodafone with my original extended rom to keep my provider settings?
First of all try the EXtROM unlocker to make sure it works on your current ROM or look for your ExtROM on the Wiki.
If you can unlock your or if your ExtROM is on the Wiki then you can just update the windows ROM. When the ROM is updated and you go through the initial setup, wait for it to say it will install some additional programs. Hit soft eset before the timer counts down to the install of the ExtROM to stop it.
Then use the ExtROM unlocker and delete all the stuff in there. Then put your ExtROM contents in there. Next, either run the ExtROM stuff manually or I usually do a hard reset and let the device do it automatically.
If that doesn't fix your connection problems I would suggest exchanging it for a new one if possible.
I also like the fact you refer to your TyTN as a 'He.'
jokinawa said:
First of all try the EXtROM unlocker to make sure it works on your current ROM or look for your ExtROM on the Wiki.
If you can unlock your or if your ExtROM is on the Wiki then you can just update the windows ROM. When the ROM is updated and you go through the initial setup, wait for it to say it will install some additional programs. Hit soft eset before the timer counts down to the install of the ExtROM to stop it.
Then use the ExtROM unlocker and delete all the stuff in there. Then put your ExtROM contents in there. Next, either run the ExtROM stuff manually or I usually do a hard reset and let the device do it automatically.
If that doesn't fix your connection problems I would suggest exchanging it for a new one if possible.
I also like the fact you refer to your TyTN as a 'He.'
Click to expand...
Click to collapse
Mine is a she...anyways though
jokinawa I thought we could have the ext rom initiate itseld unless the cabs were signed with htc's thingy? unless this has change recently. Oh how I would love to try the south africa rom with a cingular ext rom and some goodies...
slimsaturn said:
Mine is a she...anyways though
jokinawa I thought we could have the ext rom initiate itseld unless the cabs were signed with htc's thingy? unless this has change recently. Oh how I would love to try the south africa rom with a cingular ext rom and some goodies...
Click to expand...
Click to collapse
hehe
I use the Imate 1.20 ROM with the Softbank ExtROM that autoinstalled after I replaced them and did a hard reset. I also did it previously with the HTC ROMs.
then it should work fine since all those cabs came from the carrier. but i meant for say installing ms voice command
Reference:
I think since its capabilities to frustrate his owner this devices definitely have to have a soul. Or are at least living somehow.
Okay, I have to admit, "she" would be more appropriate in this case, but...
I'm still used to the update procedures from my old Qtek 9090, where the rom, radio and ext were in 3 seperate image files and where you could just delete those you didn't want to be upgraded.
I wasn't sure if I would have had all the Vodafone stuff and couldn't reverse it. But you seem quite sure that their individual stuff is in the Ext I'll have a try tonight.
My Ext can be downloaded from the site. So I can skip extracting it.
By the way: I the ftp server sometimes down? I couldn't connect yesterday from home. Now, from work, it works fine and fast.
No, didn't really work. I've got the impression that it is a little bit more reliable, but what is a push mail service that can't provide at least 99% availability? If I have to look at my phone every hour to make sure Active Sync is still doing what it is supposed to do.
I've not heard of many people experiencing this problem, but since it is only Active Sync (other programs don't have this problem) I don't see what I would get by having the phone replaced... ?
Hello !!
I have qtek 1010 german version! After i read the links i decided to upgrade the rom version, because i barely manage in english, not to metion german.
I downloaded a rom from http://www.romkitchen.de, i complete the setup with no errors and i thouht it was a success. Now in start menu i only have Recent Programs (with no access to tap on it), Today, Find and Help, and the screen logo xda-developers.com. Cant do anything the best result when i tap something its : "No program memory available. Tap Start>Settings>System tab>Memory, stop programs that did noy not automatically stop, and try again". But in start i have nothing
I downloaded another rom version 4.01.12_ENG, but now i can not connect the pda with activesync, so i cant make another upgrade.
So, please, help!!
Thanks, Regards!
Hello there.
In some occasions the roms versions has that problem, that is after upgrade, you cannot upgrade another one.
Itś simple, if you have a card reader external, you create a image from OSImage available in this site to the SDcard.
Then you reset the XDA by pressing the on botton in the same type you put the pencil in the botton of XDA.
It will start with Bootloader, then if ther is no problem at all, it will ask you if you want to install that rom that you have on the SDCARD.
After finnish you have to do a Hard Reset.
Then i think for mi experience that you have your problem resolved!!!
Hello i just got mine htc hd2 from berlin.
German rom.
Everything was working fine for couple of days untill i conected it via usb cable to my friends pc.
The phone then froze up and i had to do hard reset to get it working again.
Everything was fine untill i again connected it o the same usb port(usb front hub) next day. Phone froze again, and after hard reset pop up message just keeps appearing that my memory is low i that i need to uninstall programs, which i havent installed!
When i go to information about memory it say that my total storage is 56 mb only, and i know it was around 180mb. When i delete few sample pictures the message wont show again.
My question is? Did the stupid usb port burned up my phone, becouse my friend told me that he burned 3 usb devices from that same port !;/
And why was amount of total memory reduced?
Now phone sometimes dont boot at all, i did 5 hard resets and always same error!
Thank you for reading , and sugestion will be usefull.
Try SKTools or cleartemp to clean up your device (with sktools select clean)
This will clean up temporary Internet files, caches and other files )
Solved
I solved my problem, by unlocking the phone, hspl 2.08 , then ran task29 and flashed new rom.
Ty
Main memory from 50+mb now going to 65Mb
My problem for HD2 is each time browse FB video. Rom space will gone.. even i use "ClearTemp" to clean the temporary file problem still the same.
Just format my phone last week ago. From 45+Mb going to 50+mb..... Now is 65Mb+ I think few month later i need reformat again my phone.
Hi,
I have a problem on my smartphone. (For info, it's a motorola atrix, running a Gingerbread stock version (no rooted, no operator specific version)
The problem is : all modifications done after a specific date (new photos, installed apps, send/received messages, preferences changes) disappear after a reboot. Same thing if I delete photos that were on the phone before that date, they seem to be deleted, but after a reboot they come back.
I tried to format, but nothing happened, the memory used stays the same, format is not done though no error message is thrown
The last test will be a factory reset ...
So I was wondering:
- is my memory storage corrupted ? is there any diagnostic app ?
- or is there any "read only" option in Gingerbread that I didn't notice ?
And jost for knowing, what is happening ? Do all the changes are saved in cache, so after reboot the cache is lost and I get back to the last "persisted" state ? Or is there a reset to the state at the specific date done at each reboot ?
Thanx for your help
Ok, I come back here because i need help with my problem, i don't have any idea ...
1) I have tried a factory reset (both mode, via menu, and external reset) : nothing happens, well it tells me it wipes data, reboot, and everything is like before
2) I tried to root the phone, with :
- Gingerbreak
- SuperOneClick
- Pete's Motorola Root Tools
- Unlock Root
Gingerbreak never ends, last time running but keep as it ... so failed
SuperOneClick and PMRT seem to do something, the phone reboot, but rootchecker tell me i'm not rooted
UnlockRoot i faild making it work
3) I check apps, installed avg (just to try, no more idea) but it saw nothing special ... I uninstalled some apps...
The result is same, after rebooting, all the modifications are lost (installed/removed apps, added/deleted files, system parameters, ...)
The only way I image now is flashing the bootloader & install a new rom ...
BUT it's a system, I should be able to see what is happening, which application is messing it up ? Is there an app that reset the phone state after reboot ? I don't understand ...
An help would be appreciated,
thanx a lot
quentasil said:
Hi,
I have a problem on my smartphone. (For info, it's a motorola atrix, running a Gingerbread stock version (no rooted, no operator specific version)
The problem is : all modifications done after a specific date (new photos, installed apps, send/received messages, preferences changes) disappear after a reboot. Same thing if I delete photos that were on the phone before that date, they seem to be deleted, but after a reboot they come back.
I tried to format, but nothing happened, the memory used stays the same, format is not done though no error message is thrown
The last test will be a factory reset ...
So I was wondering:
- is my memory storage corrupted ? is there any diagnostic app ?
- or is there any "read only" option in Gingerbread that I didn't notice ?
And jost for knowing, what is happening ? Do all the changes are saved in cache, so after reboot the cache is lost and I get back to the last "persisted" state ? Or is there a reset to the state at the specific date done at each reboot ?
Thanx for your help
Click to expand...
Click to collapse
I have the same issue, I tried a lot of things, but nothing. anyone?
hello,
I couldn't find any other forum to discuss about this version of Huawei mobile phone. I really need help since the last legitimate EMU update ruined the whole system and now my new mobile phone that I have never had a chance to use it is like a trash device... I hope someone here can help me to recover it since i tried all ways I found on internet.
I bought this mobile from China and bring it to Europe. Since I wanted to remove some chinese default software (that wasn't basic software but really annoying), I used an app and rooted the mobile phone. so I removed some of chinese stuff and installed some of good software. Everything worked fine and I tested skype and I had high resolution picture with 8 Mega pixel camera. I tested all its functionality and it was really good...
I noticed that there is a new legitimate update for this OS, since I still didn't have any sd memory, I couldn't have a backup of this old system and this was a big mistake...
anyway... I let it do the legitimate update for EMU... but immediately after reboot, I noticed that Camera and bluetooth are out of functions... so I first thought the problem is with bluetooth configuration but I was wrong since the internal memory was read only and no longer available.
I formatted the internal memory via computer (the part which was available) but no luck... I bought a sd card and changed the storage from internal to external but this didn't help to function bluetooth and camera...
I had a back up from /system/apps and then removed manually the bluetooth.apk and also its odex file. then restarted the system, clear dev cache and tried to install bluetooth.apk again. but I received error message and couldnt' do that. so again I copied those file back to its location.
So bluetooth turns on now, can send signal but for receiving or sending file, it fails, It can also pairs with other device.. So I thought it should be something related to permissions. I again checked the bluetooth permissioin on /etc/permissions/platform.xml and notice they are ok.
I changed the permission of storage and added the external storage to the list and added group storage_rw.
but this also didn't solve the problem with camera and bluetooth.
several times reset to factory mode didn't solve the problem...
I tried to hack the bootloader but I could not unlock it... I sent all information to [email protected] and asked them to send me bootloader password and provide them with all detail information about the device and accepted that the device is out of warrant but I received no response...
I installed "safe system remover apps" and after having backup of Gallery2.apk, I uninstalled it (it is related to camera and all gallery information)... but with no luck I could install it again...
So, I am really hopeless now since I don't know whatelse I can to do... the system doesn't functioning and I need to load on it the custom ROM but the device only can go to fastboot and cannot load the recovery mode anymore and factory reset from the UI is only reset the mobile to fastboot without doing anything else.
I tried to run the factorymode.sh from the device but I receive error messages to access some files such as bluetooth parameters/power
I couldn't myself find this file on the directory that it looks for.
I would really appreciate it if you can tell me any way that I can unlock the bootloader from the device (because outside of the device I tried different applications but with no luck...)
I have a cutom ROM for G630-U20 (not exact version for this device but almost similar) and if I can have a bootloader password I can try this one or any other customized ROM.
I would appreciate any way that you can show me to solve the problem.... either by changing permissions to solve this problem.
Thank you.