Hi Greetings to all,
I have a Chinese Cel is a clone of the iphone 5, (using android) which will not start or do anything, if I connect to the PC, after a while it appears that detects a new hardware environment "preloader MT65XX" but after a few seconds fails to detect, while the pc can detect the cel battery icon is loaded, but from there it does nothing more,
hopefully someone can give me a tip about that is what might be happening and how to fix it, thank you very much
Related
Hi guys!
Like my brother said: if they don't know it at XDA, there is simply not a solution yet. And having tried a lot of options myself, your expertise is wanted!
How it all began:
I wanted to update my Lumia, so used CAB sender. Fine so far, but there was a bug (no keyboard) so I wanted to repair with Zune. Didn't work, it said it was impossible to repair to the previous version (code 80180083). And since it didn't started up now anymore, it bricked.
Looking for a solution, my laptop OS (Windows Vista 32-bit) didn't recognized my phone anymore as Nokia Lumia 800, but simply as 800. And now, it only recognises my phone as Unkown Device (Qualcomm CDMA Technologies MSM). And Windows does not detects a proper driver for this thing. Tried Nokia USB Connectivity, WindowsUSB and the drivers belonging to Nokia Care Suite but nothing gets it done.
View attachment 1231319
I thought I found the solution with NSS, but I dont get the option below which says Nokia Connection Cable, because yet again: no phone can be found!
View attachment 1231326
Or course I tried also with Nokia Care Suite, but yet again: the laptop can't recognise the brick! Although Windows does notices I put something in the USB port and it sees the Qualcomm device.
Hard reset
Not possible, since I will get a 3 second vibration followed by 3 seconds nothing and then half-a-second vibration.
Putting phone on
If I try, it will give the 3 second start-up vibration which connects to Windows Vista (using the typical sound) shortly followed by the half-a-second vibration (and a triple-short disconnect sound on Windows).
As you guys can understand, I am in quite a bad situation now. Since the phone is bought in my home country The Netherlands and I currently live in Melbourne Australia, I hope to prevent sending it back home at any costs.
So what do you think: is this one permanently bricked, or is it still possible with a specific driver to fix this? Seems to me it's purely a communication/connection problem between my laptop and my phone, but I run out of options to try..
You could try downloading Windows Phone Support Tool from Microsoft.
Turn on your phone by pressing on and the Camera button at the same time, it should then enter flash mode (release power on buzz but keep holding the camera button). When it's in flash mode you can try and get Windows Phone Support Tool to repair the phone for you.
Thank you for your reply!
I tried it before, and this is the message I got:
Communicating with device. Please wait for Recover button to be enabled.
Support Tool version 4.8.2345.0
The tool had difficulty communicating with your device. Please check your device connection and make sure you followed the instructions above. Try recovery again and if the problem persists please contact technical support.
No devices were found.
Click to expand...
Click to collapse
The problem seems to be that there is absolutely nothing is installed on my phone. Therefore, the connection with my phone fails over-and-over. Doesn't matters which program I use. I am almost sure that there is a connection fail between the computer and my phone. I tried it at some other laptops but at every laptop it says 'Qualcomm CDMA Technologies MDM'. But not a single program (NSS/NCS/Phoenix/Windows Phone Support Tool) can make an actual connection with the phone, so it must be driver related.
When I try to turn it on, it starts up but then puts itself off, like if its out of energy. It doesn't charges though. What do you think: driver related or battery related?
------------------
Extra added info: when I try to flash Rainbow os-new with NSS, I get this message:
Checking file selection...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
Click to expand...
Click to collapse
What does that means?
Some more info about using NSS in an attempt to try flashing my phone
(Command: Flashing > WP7 Tools > Write OS)
Checking file selection...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
----------------------------------------------------
(Command: Flashing > WP7 Tools > P**** FS)
Looking for NAND disk...Not found.
Things to check:
1. Is the phone connected?(Plug to the USB)
2. Is it in the correct mode?(Try to switch to OSBL mode)
3. Have you installed the Qcom loader ?(Use the Install button)
Preparing update...Done.
------------------------------------------
(Command: Flashing > WP7 Tools > Install)
Init connection...Phone not found!
Does this shows a battery problem? I have had battery problems before with my phone, but I guess that when I try to flash (even with the extra add to NSS) it should ignore any battery level. Or should I screw it open, try it again and see if it will work then?
If it's finding it as an 800 that means it's finding it (it finds mine as an 800 when I've played with it too much).
When you enter flashing mode via camera button, do you not get the image of the phone connected to a PC on the phone?
I had that in the beginning, but those days are long gone.. I don't know how it happened that I don't get that back anymore. Perhaps because my phone doesn't boots itself completely, but falls out of its boot program. Nothing visible on screen
Hi guys, I believe I have hard bricked my phone.
I was trying to solve the IMEI lost by installing these bins files (www movilesdualsim dot com/threads/ayuda-con-i9500-s4-with-mtk6589-quad-core-5-0-screen-1920-1080.47124/) using SP_Flash_Tool_v3.1304.0.119, so I was doing so and when SPFlash has finished the phone doesn't boot up anymore. I have tried to flash recovery.img with SP Flash but it doesn't even detect the phone anymore.
When I connect the phone to the PC by USB cable I can heard the connected device sound going on and off and looking the windows device manager I can see a "Alcatel Single RNDIS Interface" device connected but like I said it goes on and off every 5 seconds or so. If I put the battery on the phone it doesn't make any different.
I would appreciate so much if anyone could help me out. I don't usually bother people asking for help but I can't really find how to fix this issue and I don't know if it is even possible to fix it.
Thank in advance
pepeg said:
Hi guys, I believe I have hard bricked my phone.
I was trying to solve the IMEI lost by installing these bins files (www movilesdualsim dot com/threads/ayuda-con-i9500-s4-with-mtk6589-quad-core-5-0-screen-1920-1080.47124/) using SP_Flash_Tool_v3.1304.0.119, so I was doing so and when SPFlash has finished the phone doesn't boot up anymore. I have tried to flash recovery.img with SP Flash but it doesn't even detect the phone anymore.
When I connect the phone to the PC by USB cable I can heard the connected device sound going on and off and looking the windows device manager I can see a "Alcatel Single RNDIS Interface" device connected but like I said it goes on and off every 5 seconds or so. If I put the battery on the phone it doesn't make any different.
I would appreciate so much if anyone could help me out. I don't usually bother people asking for help but I can't really find how to fix this issue and I don't know if it is even possible to fix it.
Thank in advance
Click to expand...
Click to collapse
Hi, you solved your problem? I have the same issue, help me
Hi all, I introduce myself, I am Franco Paladini, First Son.
Well let's get my phone will not turn on, (on but not quite, sticks to the logo of the operator) can not have it connected to the PC, which is the worst.
I commented as was my dear LG L9:
Windows :8.1 pro
Phone: LG P778G (P768 board)
ROM: Stock JB (V20B Personal Argentina)
Kernel: Stock
Root: Yes
It all started when you activate or re-activate a tweak to the "Android Tweaker 2" application. Previously it had already activated some as battery life, performance, multimedia, etc. All tested walked 10 points. But I happened to go over those who had already turned and noticed that some had not been activated, immediately afterwards the turn, I remember that was the voltage Flash, JPEG quality, and I think that caused the problem persistence hw ui. This caused the restart not pass the logo of the operator. I am no expert on the subject but not a rookie, I thought it would be easy flash, as he had done previously with other devices, and with this also but had flashed with the device running all ok. Now the problem is that the computer does not recognize my phone, or cell phone does not connect well with pc. When I plug in download mode (SW / UPGRADE) does not install any driver. When I plug in recovery mode (stock not cwm not TWRP) some drivers but not the OMAP, only androidnet installed sooner, but soon turned off to not connect ever. Or turning off or restarting anyway connected, please help! Will thank a lot and was investigating several hours and not be able to connect, have reinstalled drivers, have tried different versions but none of them work, I'm desperate, it IS URGENT! I can spend the Device Manager list of windows or what they may.
Hello,
Excuse my English please
I hope I'm in the right section, I think my problem may be of a general nature.
After an ota to my such android update I had a crash with inability to restart tel
I connected it to my pc and ofcourse it did not recognize the .after have changed PC, used all ports usb etc.. .the pc recognized finally 5 disc telling me that to continue should format the drives, I have stupidly done.
And disaster, such as planted, doesn't light even more, big galley.
Think you that there is a way to recover everything.
, I just wonder if when a such android is formatted, there is a way to re-inject the program indoors. Or if it is ****ed up...
Thank you for your answers
Hello,
i get big problem maybe anyone can help.I have Iphone 6s clone and i was flashing with SP Tool and after flash i get OK i disconnect phone and i try to turn on but nothing happen, nothing working no reaction, when i connect again to computer i get only sound (connected after 2sec disconnected) and it's non stop, but still nothing working.Maybe its bricked all ? maybe can get help for this