what methods could i use to unroot HTC Aria?
sent from my still kicking ass aria
I just used the "S-on" method on the development site and it worked. Some language difficulties, but you should be able to figure it out. You need a copy of the HTC / AT&T 2.2 ROM update, which appears to have been taken off the HTC website. I had a copy. The method has you copy a file to the phone and then run the ROM update - he says from the phone but means from the PC. I'd post a copy of the AT&T ROM, but I have no idea how.
Sent from my Liberty using XDA
Hello everybody
The new ICS update for the ROGERS EVO 3D just came out yesterday, so I restored my phone to the original firmware (via restoring the backup I did in the recovery) and then proceeded to download the OTA update. After it finished, the phone rebooted into the recovery (i have 4-ext touch recovery) and started installing. After it finished, the phone rebooted and then got stuck on the white HTC screen. I managed to enter the recovery again and restore the original firmware again. What is that I'm doing wrong here? Here is some helpful info:
Rogers EVO 3D, GSM version
Unlocked bootloader (HTCDEV method), S-ON
carrier unlocked
HBOOT 1.49.0008
OS is rooted
I'm in the same boat but I'm not able to do a recovery. I went through the update process and when the phone rebooted it got stuck on the white htc screen. I can get it into the bootloader menu but when i choose recovery it starts but then i get an error with a pic of the device and the red yield sign. If i choose factory reset it just gets stuck at the white htc. I read some other posts and I saw that having an unlocked bootloader may cause issues with updates so that may be your issue as for me, I'm not sure what I can do. I may just need the actual update file to redo the update but I'm not sure where to find it.
Same here, but I don't get half way through the ota update before I see the red triangle and exclamation mark. Phone will boot into stock recovery (which I would assume you need instead of modded recovery) and the update starts, but doesn't complete. I pull the battery and the phone boots up normally. Just can't seem to get through the update. Could be something to do with being s-off I would guess.
EJ
madmajd said:
Hello everybody
The new ICS update for the ROGERS EVO 3D just came out yesterday, so I restored my phone to the original firmware (via restoring the backup I did in the recovery) and then proceeded to download the OTA update. After it finished, the phone rebooted into the recovery (i have 4-ext touch recovery) and started installing. After it finished, the phone rebooted and then got stuck on the white HTC screen. I managed to enter the recovery again and restore the original firmware again. What is that I'm doing wrong here? Here is some helpful info:
Rogers EVO 3D, GSM version
Unlocked bootloader (HTCDEV method), S-ON
carrier unlocked
HBOOT 1.49.0008
OS is rooted
Click to expand...
Click to collapse
Same problem but whit s-off
I have been predicting that this would happen... ICS failures with non-standard HBOOTs. Good luck.
Probably will have to wait for an RUU or custom.
I'd recommend using the GB ruu to get you back to full stock. Always found Rogers ota updates (possibly all carriers?) won't install if you're rooted or using a custom recovery.
I had to install the ruu via renaming the rom.zip to PG86IMG.zip and copying it to the sd card so that the bootloader would auto flash it. Running the ruu exe tossed up all kinds of errors.
It will put everything back to Rogers stock. After that just setup wifi and do the 2 Rogers OTA updates.
Once in ICS, it's easy peasy to get recovery and root back.
Also, for what it's worth, Go Backup is awesome for going rom to rom and not needing a full backup. Use it on rooted rom, then use it to restore after rooting new rom. Will do all your apk's and everything.
1st post here after years of lurking. Yay.
wikkid said:
I'd recommend using the GB ruu to get you back to full stock. Always found Rogers ota updates (possibly all carriers?) won't install if you're rooted or using a custom recovery.
I had to install the ruu via renaming the rom.zip to PG86IMG.zip and copying it to the sd card so that the bootloader would auto flash it. Running the ruu exe tossed up all kinds of errors.
It will put everything back to Rogers stock. After that just setup wifi and do the 2 Rogers OTA updates.
Once in ICS, it's easy peasy to get recovery and root back.
Also, for what it's worth, Go Backup is awesome for going rom to rom and not needing a full backup. Use it on rooted rom, then use it to restore after rooting new rom. Will do all your apk's and everything.
1st post here after years of lurking. Yay.
Click to expand...
Click to collapse
Alright thanks a lot
Just an update on what I did. I was able to reload the stock gb rom for rogers using the exe file, then I went through the 2 updates that came up when checking and ics is now up and running on my phone. However in my attempts of trying to fix the original problem, I managed to re-lock my bootloader before flashing to stock rom and I had s-on the whole time. hope this help.
i switched to stock like.. a week back?
jus got ota on 4th
i WAS rooted and using juopunutbear's hboot *u can jus get the hboot from their website*
so i jus flashed back stock recovery.. and updated.. and success.. lost root though.. and i was back to stock bootloader..
used the PG86IMG with juopunutbear's bootloader and 4ext recovery.. and flashed cwm supersu.. v0.91 i think.. i dunno.. latest one.. and bam.. im on stock.. rooted.. and works perfectly..
Possible sollution
Maybe try flashing one of the customized ROMs that are based on the latest OTA update. I'm sure Anryl's newest rom is blazing-fast and stable. You can find it in the gsm android development forum and flash it via recovery. Make sure you have the latest 4ext recovery installed, though.
where can a i find that stock rogers rom i modified mine and that might be the reason i get a security failure in hboot. s is on. when i run the ruu file in windows to downgrade i get error 155. when i run the the update from about phone. it locks up with blue android guy and yellow exclamation mark. i remove the battery and she boots fine with no changes.
I am trying to do same. Get stuck on HTC screen. I have S-ON. Was on cobra 2.4 prior.
If anyone can give details on how to fix it, it would be great! Please no saying "install exe". I need to know which exe etc.
just wanted to tell everyone that in order for the ota update to work properly, you need to be running stock unrooted firmware with a locked bootloader. Just relock your bootloader, reinstall the stock firmware, upgrade to ics via ota, then re-unlock and re-root.
Hi
I have a HTC EVO 3D from Rogers that was got messed up during changing networks... rooted the phone for no apparent reason... to now get a update for it for ics from the provider and it bricked the phone.
It's stuck at HTC boot screen, can get fastboot USB from bootloader. recovery gets a ! in a triangle and factory reset doesn't work, freezes at splash screen after restarting the phone. Was stupid not making a backup or searching for programs to back it up before I went ahead and clicked update
It has HTC boot-loader 1.49 s-on but is rooted.
I am looking for clear(fix my evo for dummies) step by step instructions with correct installation for my model of phone, HTC EVO 3D Rogers GSM, or anything that could replace the os to get my phone to be useful again I'm currently using my backup phone a HTC G1 HTC ftw
Try kingcobra's rom, ota from rogers will not boot due to the fact that your phone is rooted, kingcobra's rom is based on rogers ota, flash it and leave it.
Sent from my HTC EVO 3D X515m using xda premium
Davideichler7 said:
Hi
I have a HTC EVO 3D from Rogers that was got messed up during changing networks... rooted the phone for no apparent reason... to now get a update for it for ics from the provider and it bricked the phone.
It's stuck at HTC boot screen, can get fastboot USB from bootloader. recovery gets a ! in a triangle and factory reset doesn't work, freezes at splash screen after restarting the phone. Was stupid not making a backup or searching for programs to back it up before I went ahead and clicked update
It has HTC boot-loader 1.49 s-on but is rooted.
I am looking for clear(fix my evo for dummies) step by step instructions with correct installation for my model of phone, HTC EVO 3D Rogers GSM, or anything that could replace the os to get my phone to be useful again I'm currently using my backup phone a HTC G1 HTC ftw
Click to expand...
Click to collapse
Go to the gsm development forum and download the RUU for the phone, and restore it to stock unrooted OS. Before you do that though, make sure that your phone's BOOTLOADER IS LOCKED. Look up how to re-lock your bootloader. After you relock your bootloader, you can proceed with restoring the phone.
Soooo.... basically, what I'm getting from this is, if you like having a locked bootloader, CWM and root, don't bother trying to install this OTA update because it's a headache. Agree?
The phone's not mine, it's my wife's, and she doesn't want anything special or like the idea of me messing around in her phone.
I was about to install this late last night, just about to hit that button, then I thought, "what about the bootloader? what about root? what about the fact that it's now unlocked and being used on a carrier other than Rogers?"
I have root running the solidrom 4.1 version but I need to take my phone to sprint as the bottom section of my screen doesnt work. How can I get the phone back to normal so that my warranty covers it? I believe it is not covered if it is modified? I pay for the extra warranty they have also.
Do I need to install the stock rom and then turn s-on? If so where do I get the stock rom?
Running the RUU for the device will reset the software back to stock and remove root. Google is your friend and its an easy one click and you are good to go deal. Make sure you download the RUU that right for your phone. (IE: VM) You'd probably have to reapply the hboot your phone came with and put s back on, I'm not sure if RUU will replace the hboot. Revert to stock first then put s-on if RUU doesn't replace boot.
Sent from my Evo V 4G using XDA Premium HD app
As the title says. Need to get rid of the developer text that you see on the HTC's boot screen before I take it back to the store tomorrow for when I port back to Sprint and re-use my HTC One. Thanks.
Flash the RUU. Tutorial should be in the RUU thread, which is around here somewhere.
Or, flash the stock boot.img and restore the stock recovery. (Not 100% is the later is required. Could just be the boot.img)
Sent from my HTC One using Tapatalk 4
So while I had my HTC One, I converted it to the Google Play Edition for stock Android. I'm now trying to sell it after getting my Nexus 5, so I restored the CID to stock (CWS__001), removed the tampered heading, returned hboot to 1.44, locked the bootloader (while setting the heading to 'locked' instead of 'relocked'), and return the phone to S-ON. I installed RUU version 1.26.502.12 and it worked without a problem, so it's now COMPLETELY stock.
Problem is, I KNOW there are updates, since the phone is only on 4.1.2, but it refuses to see them when I run AT&T Software Update, and I'm trying to figure out why (also plugged in my SIM card again, to try to run the OTA).
Yo need stock recovery for OTA
Sent from my HTC One using xda app-developers app
TopoX84 said:
Yo need stock recovery for OTA
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Phone is currently on stock recovery. After putting everything back to completely stock (which required root and TWRP) I installed the RUU again, to put EVERYTHING back to stock, including the recovery.
Well, I don't know why it didn't see the update earlier, but I checked again this morning (had to roll the phone date a day forward to allow another check) and it successfully saw and downloaded. Looks like I was just being impatient...