S3 restarts itself - Galaxy S III Q&A, Help & Troubleshooting

i got a s3 its I9300XXELKB baseband version and
kernel 3.0.31 - 1042335
Build is JZO54K.I9300XXEMC2
THE PHONE IS RESTARTING agin and agian what shld i do. it is from uk and i am in india.

shahadithyab said:
i got a s3 its I9300XXELKB baseband version and
kernel 3.0.31 - 1042335
Build is JZO54K.I9300XXEMC2
THE PHONE IS RESTARTING agin and agian what shld i do. it is from uk and i am in india.
Click to expand...
Click to collapse
flash a stock rom via odin, wipe data from recovery and restart your phone.

help
sriram231092 said:
flash a stock rom via odin, wipe data from recovery and restart your phone.
Click to expand...
Click to collapse
which stock rom should i flash i am new

rom that belongs to india. from www.sammobile.com
select country and download the firmware.
sent from my GT-I9300 running CM10.1 RC4 by Temasek

help
it is not there for india in samobile

http://android.funtwixt.com/2013/04/official-firmware-update-for-samsung.html

INDIA
http://www.sammobile.com/firmwares/1/
http://forum.xda-developers.com/showthread.php?t=1623525
FAQS and GUIDES are all in General section and all free .
jje

help
it still restarts. I flash with odin with indian stock then also it restarts

factory reset from recovery

help
i am going to download vietnam stock again trying with odin.
tried factory reset from recovery bt not working

Hi everybody,
3 months with this pb, i try all things in the internet:
finaly i found the sol;
after installation OMEGA v50.1 all things ok, no restarts!
http://forum.xda-developers.com/showpost.php?p=26325777&postcount=4

Related

[Q] stock SG2 stuck on Bootscreen after flashing CWM

Hello,
I have on my phone SG2 with ICS 4.0.3.
Yesterday i have a lot issues...reboot,f/c,crashing on camera and other!
I searched on the forum and i downloaded the stock firmware and kernel for my country and carrier.
Firmware info: PDA:BOKG2|PHONE:BOKG1|CSC:COSKF1
BOKG2 Stock Kernel
i flashed both and everything is ok!
Today i went to flash again CWM but when i flash it stuck on boot screen.
Tried 4.0.1.5 , 4.0.0.2 , 5.0.2.3 ....nothing...
Sometimes i get into cwm but doesn't recognized my ext-sd to flash a custom rom
only when i am flashing the BOKG2 Stock Kernel works!
What am i doing wrong??? everything???
tomklm said:
Hello,
I have on my phone SG2 with ICS 4.0.3.
Yesterday i have a lot issues...reboot,f/c,crashing on camera and other!
I searched on the forum and i downloaded the stock firmware and kernel for my country and carrier.
Firmware info: PDA:BOKG2|PHONE:BOKG1|CSC:COSKF1
BOKG2 Stock Kernel
i flashed both and everything is ok!
Today i went to flash again CWM but when i flash it stuck on boot screen.
Tried 4.0.1.5 , 4.0.0.2 , 5.0.2.3 ....nothing...
Sometimes i get into cwm but doesn't recognized my ext-sd to flash a custom rom
only when i am flashing the BOKG2 Stock Kernel works!
What am i doing wrong??? everything???
Click to expand...
Click to collapse
Try to flash with ODIN first if you cannot flash by CWM!
I had same problem . I flashed stock firmware and then flashed siyah kernel through odin and my phone started . Then i rebooted into recovery mode and flashed custom rom.
And also do wipe before flashing custom firmware
Sent from my GT-I9100 using Tapatalk
hi
all
i have used ICS 4.0.3 LPB with letest CWM & no any issue
used letest CWM with ICS 4.x
abhi chahal said:
I had same problem . I flashed stock firmware and then flashed siyah kernel through odin and my phone started . Then i rebooted into recovery mode and flashed custom rom.
And also do wipe before flashing custom firmware
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Thanks... This resolve my problem

[Q] [HELP] SGS2 with Sensation Rom Root Problem

Hi guys!
Sry for my bad english first!
Long time ago, i rooted my SGS2 with Sensation Rom 1.8 GB by Crysis21.
Now i do a Full Wipe Flash with the new 3.2Version with ICS 4.0.3 XLPS.
So Rom working fine and having no Problems, but have no root access any more.
Try to Flash CF-ROOT 5.4 XLPS with odin and CWM.
When i start the CWM App on Phone it says "This version of CWM Manager should be used with CF-Root V5 or newer" but i flashed CF-ROOT 5.4
Apps say: Phone is NOT rooted.
PDA: I9100XXLPS
Phone: I9100XXLPR
CSC: I9100XALPS
Anyone can help me?
Sry again for my bad english
No one can help me?
Is it possible to restore Phone to Factory Resets, without CWM, and Flash an Original ICS Rom??
Have you installed,,superuser''from market?
Sent from my GT-I9100 using xda premium
LiFeSII said:
No one can help me?
Is it possible to restore Phone to Factory Resets, without CWM,
yes recovery wipe data and factory reset = restore the last flahed firmware .
and Flash an Original ICS Rom??
Yes via Odin via all the ICS posted links in general section .
jje
Click to expand...
Click to collapse
SupraN0va said:
Have you installed,,superuser''from market?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Ja hab ich probiert, ohne erfolg.
JJEgan said:
LiFeSII said:
No one can help me?
Is it possible to restore Phone to Factory Resets, without CWM,
yes recovery wipe data and factory reset = restore the last flahed firmware .
and Flash an Original ICS Rom??
Yes via Odin via all the ICS posted links in general section .
jje
Click to expand...
Click to collapse
Thanks...
Now i Flash SU-BusyBox-Installer Kernel and have root again, but WLAN not working... so i flash another Kernel after the SU/BB-Installer and now its working with root
Click to expand...
Click to collapse

GT-I9100 - CWM Recovery won't install

Hey,
I've successfully rooted my SII and installed ROM Manager, but as I try to flash CWM Recovery and select GT-I9100 the install doesn't commence and I'm left with a message saying 'An error occurred while downloading your recovery'. Any solutions to fix this or flash CWM in a different way so I can install CM9?
Thanks for any help
XCQT said:
Hey,
I've successfully rooted my SII and installed ROM Manager, but as I try to flash CWM Recovery and select GT-I9100 the install doesn't commence and I'm left with a message saying 'An error occurred while downloading your recovery'. Any solutions to fix this or flash CWM in a different way so I can install CM9?
Thanks for any help
Click to expand...
Click to collapse
first, Don't use ROM manager, it's not full compatible with our phone. You have been warned!
Second, please provide the following information:
-Your Rom / firmware details (dial *#1234#)
-What kernel are you using (check Settings>about)
-How did you ROOt your phone
Your problem is very easy to solve. however, your response is important
Jokesy said:
first, Don't use ROM manager, it's not full compatible with our phone. You have been warned!
Second, please provide the following information:
-Your Rom / firmware details (dial *#1234#)
-What kernel are you using (check Settings>about)
-How did you ROOt your phone
Your problem is very easy to solve. however, your response is important
Click to expand...
Click to collapse
I used S2 root to root my phone.
My kernel is I9100XWLP3 (3.0.15-I9100XWLP3-CL287862
[email protected] #3).
Dialling *#1234# brings up
"PDA : I9100XWLP7
PHONE : I9100XXLPS
CSC : I9100XEULP5
Build Info : Tue Apr 3 19:44:49 KST 2012
Also, if we manage to fix this, how should I go about installing CM9 (if ROM Manager isn't fully compatible)?
Thanks
XCQT said:
I used S2 root to root my phone.
My kernel is I9100XWLP3 (3.0.15-I9100XWLP3-CL287862
[email protected] #3).
Dialling *#1234# brings up
"PDA : I9100XWLP7
PHONE : I9100XXLPS
CSC : I9100XEULP5
Build Info : Tue Apr 3 19:44:49 KST 2012
Also, if we manage to fix this, how should I go about installing CM9 (if ROM Manager isn't fully compatible)?
Thanks
Click to expand...
Click to collapse
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Jokesy said:
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Click to expand...
Click to collapse
So I flash Siyah using Odin, run CWM, and then flash CM9+gapps?
Sent from my GT-I9100 using xda app-developers app
XCQT said:
So I flash Siyah using Odin, run CWM, and then flash CM9+gapps?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Once you've flashed the CWM recovery, then download the zip version of Siyah kernel and just flash in CWM recovery.
Very simple
Swyped from my Samsung Galaxy SII
Jokesy said:
Once you've flashed the CWM recovery, then download the zip version of Siyah kernel and just flash in CWM recovery.
Very simple
Swyped from my Samsung Galaxy SII
Click to expand...
Click to collapse
Thank you so much. Got it up and running
CWM not getting installed
i flashed the siyah kernal v6 beta 4 which i guess is the lates but still in rom manager it show u have a cwm uupadte bt i am unable to it plz help because of this i am unable to update cynogenmod 10.1 in my cel.
Rom-Stock JB LSJ
kernal-siyah v6 bet 4
Jay_7 said:
i flashed the siyah kernal v6 beta 4 which i guess is the lates but still in rom manager it show u have a cwm uupadte bt i am unable to it plz help because of this i am unable to update cynogenmod 10.1 in my cel.
Rom-Stock JB LSJ
kernal-siyah v6 bet 4
Click to expand...
Click to collapse
Did you even bother reading the topic you replied to?
Rom Manager from market is not properley compatible with our devices, no matter what the manager says or if you see SGS2 in the list. Uninstall it and only use the "CWM" app that is installed by kernel or reboot into recovery.
TheATHEiST said:
Did you even bother reading the topic you replied to?
Rom Manager from market is not properley compatible with our devices, no matter what the manager says or if you see SGS2 in the list. Uninstall it and only use the "CWM" app that is installed by kernel or reboot into recovery.
Click to expand...
Click to collapse
M sorry bt i got that so what can i do to install the latest CWM ???
Jay_7 said:
M sorry bt i got that so what can i do to install the latest CWM ???
Click to expand...
Click to collapse
It doesnt matter, you have no reason to have latest, they are just updates to support more devices.
Just flash custom kernel, like latest Siyah, the kernels contain CWM.
Jokesy said:
1. Visit here for CWM recovery, very simple!
2. Download and Flash Siyah kernel 4.1.1.
3. Visit CM9 thread and download ROM and Gapps.
4. follow the steps on CM9 thread about flashing the ROM
if you need any more help do let me know.
Click to expand...
Click to collapse
for step 1, we are installing a temp CWM for flashing kernel in step 2?
phone stuck in restarting when flashing cwm
i had a SHW m250k ics.i converted it into gti9100 ics ,then flash jellybean 4.1.2 XWLST and rooted it with CWM-SuperSU-v0.97 from external sd card. i tried to install CWM GT-I9100_ClockworkMod-Recovery_4.0.1.4 by flashing with odin 1.85 . i used a sites. after flashing that phone stuck at restarting with yellow triangle,while CWM is working in recovery mode .i tried to battery remove but nothing worked.then i tried to again root CWM-SuperSU-v0.97 from sd card....but it wont start........the download mode and recovery mode is working ..........what can i do now...........please help..........if i posted this in a wrong page ,sorry...................
Flash siyah v6.
Sent from the little guy
gastonw said:
Flash siyah v6.
Sent from the little guy
Click to expand...
Click to collapse
Is this for me?...sorry...I didn't catch you.......Can you please elaborate or any link for my phone model and download links
---------- Post added at 07:52 AM ---------- Previous post was at 07:12 AM ----------
sunyreza said:
i had a SHW m250k ics.i converted it into gti9100 ics ,then flash jellybean 4.1.2 XWLST and rooted it with CWM-SuperSU-v0.97 from external sd card. i tried to install CWM GT-I9100_ClockworkMod-Recovery_4.0.1.4 by flashing with odin 1.85 . i used a sites. after flashing that phone stuck at restarting with yellow triangle,while CWM is working in recovery mode .i tried to battery remove but nothing worked.then i tried to again root CWM-SuperSU-v0.97 from sd card....but it wont start........the download mode and recovery mode is working ..........what can i do now...........please help..........if i posted this in a wrong page ,sorry...................
Click to expand...
Click to collapse
can anybody help with details.........my phone is likely dead man.........
Yes it was meant for you, flash siyah v6 .tar version via Odin.
Sent from...this is not even my S2
after rooting my GS S2 GT-I9100 [xxlsj] leaked firmeware can i flash any cwm recovery.zip from the stock recovery : )
tissaoui said:
after rooting my GS S2 GT-I9100 [xxlsj] leaked firmeware can i flash any cwm recovery.zip from the stock recovery : )
Click to expand...
Click to collapse
I assume you are talking about PhilZ recovery........
If all you want is a custom recovery on a stock firmware then you have to match the recovery to the firmware build......
And you *do* realise that the leak/test firmware is not as stable as release firmwares don't you?
http://i.imgur.com/rVnFwJM.jpg

Emergency Calls Only Problem

Hi i have this problem for 2 days and i dont know why. I was on lollipop cm12 and i change to back to noot rom there i didn't have signal and i flash a cm11 than there i have signal but only with emergency call only. From there i tried to flash modems and official samsung firmware but nothing helped. What can i do ?????
It might a kernel issue, but as you don’t give much information, it’s difficult for people to help you. In order to increase your chance to be answered, you should try to be as specific as possible and describe your full software configuration: rom, kernel, recovery, modem etc…
now i am on cm12 week 7 with boeffla kernel, cwm recovery and my baseband is i9300xxemg4 , where can i find my modem ???
anonim14 said:
now i am on cm12 week 7 with boeffla kernel, cwm recovery and my baseband is i9300xxemg4 , where can i find my modem ???
Click to expand...
Click to collapse
You need to flash back to stock with odin make sure its 4.3 stock rom then if you still have no signal flash this patched modem and kernel with a custom recovery >> https://drive.google.com/folderview...=sharing&tid=0B6MIUd7HJudAbU5YaGkzOUowMG8#lis << make sure to factory reset after flashing if you get a bootloop.
odin doesn't let me to flash I9300ZCUBMK2 firmware
anonim14 said:
odin doesn't let me to flash I9300ZCUBMK2 firmware
Click to expand...
Click to collapse
Try using Odin 1.85 from here or use a different stock rom >> http://www.andromint.com/download-odin-latest-version/ <<
thx very much for the help guys

Running 4.1.2 XXELLA , How to custom rom?

Got an old S3 I9300 stuck on XXELLA .
How do i update to compatible modem and bootloadder to install Bliss Pop>?
http://forum.xda-developers.com/galaxy-s3/development/rom-blisspop-team-bliss-t3010596
Phone is on FULL stock ROM. NO root no cwm.
Phone info IMAGE:
http://i.imgur.com/a6foC4Q.jpg
Qwerty123 \m/ said:
Got an old S3 I9300 stuck on XXELLA .
How do i update to compatible modem and bootloadder to install Bliss Pop>?
Click to expand...
Click to collapse
1st you must update your firmware: try OTA-update or, if it fails, download your newest firmware from sammobile.com and flash it with Odin. Control, whether IMEI is correct and you can make calls.
2nd root with CF-autoroot. Install TWRP-recovery.
3rd install any custom ROM.

Categories

Resources