Hi i have this problem for 2 days and i dont know why. I was on lollipop cm12 and i change to back to noot rom there i didn't have signal and i flash a cm11 than there i have signal but only with emergency call only. From there i tried to flash modems and official samsung firmware but nothing helped. What can i do ?????
It might a kernel issue, but as you don’t give much information, it’s difficult for people to help you. In order to increase your chance to be answered, you should try to be as specific as possible and describe your full software configuration: rom, kernel, recovery, modem etc…
now i am on cm12 week 7 with boeffla kernel, cwm recovery and my baseband is i9300xxemg4 , where can i find my modem ???
anonim14 said:
now i am on cm12 week 7 with boeffla kernel, cwm recovery and my baseband is i9300xxemg4 , where can i find my modem ???
Click to expand...
Click to collapse
You need to flash back to stock with odin make sure its 4.3 stock rom then if you still have no signal flash this patched modem and kernel with a custom recovery >> https://drive.google.com/folderview...=sharing&tid=0B6MIUd7HJudAbU5YaGkzOUowMG8#lis << make sure to factory reset after flashing if you get a bootloop.
odin doesn't let me to flash I9300ZCUBMK2 firmware
anonim14 said:
odin doesn't let me to flash I9300ZCUBMK2 firmware
Click to expand...
Click to collapse
Try using Odin 1.85 from here or use a different stock rom >> http://www.andromint.com/download-odin-latest-version/ <<
thx very much for the help guys
Related
Hi, I am running an ics custom rom from rizdroid 19100xwlp4-19100xxlps-19100luxlp1 and I would like to flash clockworkmod to my rooted phone via Odin but not sure which version I need. Any help please or advise please.
Alan
I use Siyah Kernel which has CMW 5.5.0.4.
you can get this kernel from here:
http://www.gokhanmoral.com
Thanks, do I just flash my phone using Oldi with the Kernal or is there anything else I have to do?
If your phone is I9100 international model, just put the Siyah kernel TAR file on the ODIN PDA and flash.....
How did you flash the custom rom "rizdroid 19100xwlp4-19100xxlps-19100luxlp1"
can you give us the link/thread for this ROM
Here is rizdroid's custom rom http://forum.xda-developers.com/showthread.php?t=1544487&page=416
I flashed used Odin, and my phone is an international 19100
Alan
maxal said:
Here is rizdroid's custom rom http://forum.xda-developers.com/showthread.php?t=1544487&page=416
I flashed used Odin, and my phone is an international 19100
Alan
Click to expand...
Click to collapse
my friend, this is not a custom ROM this is official ICS rom, after installing from ODIN, if you have followed the rooting method of the same thread instruction, (CF-root) you should have already a latest Clockworkmode installed in your Phone. no need of flashing again any kernels.
to checkout this just shut down the phone and press Vol-up+home+power button and hold for few seconds to appear the galaxy logo and keep pressing til it blinks and appear again then release.....you will get the CWM recovery
Hi all I did was flash the rom via Odin and I have an app that checks if you are rooted and it says I am but when I do the test that you said to do I get the Android system recovery not cwm recovery.
Alan
maxal said:
Hi all I did was flash the rom via Odin and I have an app that checks if you are rooted and it says I am but when I do the test that you said to do I get the Android system recovery not cwm recovery.
Alan
Click to expand...
Click to collapse
CF-Root for your firmware is not found so just flash Siayah from ODIN, make sure flashing file should be .TAR and selected from PDA.
http://gokhanmoral.desean.net/siyahkernel/v3.0/Siyah-v3.0.1.tar
Thanks mate all done now and all ok. I bought the app to clear the yellow triangle which worked also. Any tips you have for a rooting noob would be much appreciated.
Alan
maxal said:
Thanks mate all done now and all ok. I bought the app to clear the yellow triangle which worked also. Any tips you have for a rooting noob would be much appreciated.
Alan
Click to expand...
Click to collapse
The first thing you have to do after rooting is Nandroid back up and EFS back up of your phone...
Dont be after the shortcuts and tips, read as much as possible, There is no substitute for READING for COMPREHENSION.
these STICKIES will give you the knowledge about SGS2 from basic to the deepest.....
Try the N. E. A. K. Kernel with the modded cwm, works very well!
Gesendet von meinem GT-I9100 mit Tapatalk
Thanks Keasbu for replying I have downloaded your Kernel I take it just flash my phone using Odlin but what about the Kernel that I flashed that Zaheedahmed gave me the link for. Also another question I want to play around flashing different roms to my phone do I need to flash a new kernel everytime.?
Alan
maxal said:
Thanks Keasbu for replying I have downloaded your Kernel I take it just flash my phone using Odlin but what about the Kernel that I flashed that Zaheedahmed gave me the link for. Also another question I want to play around flashing different roms to my phone do I need to flash a new kernel everytime.?
Alan
Click to expand...
Click to collapse
It is not terribly required to change your Kerenel every time you flash, the suitable kernel already packed by devs for their ROM is more than enogh for running the Phone...but further it is your choice to change the kernel after exploring the reviews and features of the custom kernels and decide whether it will give you any advantage or not....Also no need to worry about Clockworkmode it will be their already on the (allmost all) Custom rom.
the kernel which I suggested that time was mainly for you to get a Clockworkmode recovey and rooting which anable you to flash roms further
NOTE : Once you have already got Clockworkmode no need to use the Odin version of the Custom Kernels, just take the CWM version and put it on your SD card and falsh it from CWM recovery.
Thanks for replying zaheedahmed, what do you think of Keasby's Kernel is it worth flashing will I loose clockworkmode?
Alan
maxal said:
Thanks for replying zaheedahmed, what do you think of Keasby's Kernel is it worth flashing will I loose clockworkmode?
Alan
Click to expand...
Click to collapse
Sorry mate I have no personal expreance with any ICS kernels yet...
just read the threads....to find which is most popular and least problem giving....,.do you know the questian "Which is best" is baned in the XDA..
---------- Post added at 11:48 AM ---------- Previous post was at 11:42 AM ----------
No you wont loose the CWM, all the custom kernels are attached with a CWM recovery...that is the main goody of SGS2 kernels...
One more question if I flash a new release ics rom and it doesn't have a csc with xeu do I flash a csc xeu file at the same time as flashing the ics rom, will this work?
Alan
maxal said:
One more question if I flash a new release ics rom and it doesn't have a csc with xeu do I flash a csc xeu file at the same time as flashing the ics rom, will this work?
Alan
Click to expand...
Click to collapse
Sorry experts can give comments about the compatibility of such mix flashing....
But why are you so concerned about CSC, what difference is giving you XEU than others just for my information.
CSC can only flashed from ODIN, you will loose your root and you have to Root it again by flashing a Root kernel again...
Sorry I thought I needed csc xeu as I live in the UK
CSC not required if you enter network settings manually .
jje
Hey all.
After reading about the brickbug and failing the eMMC test, im a little confused as to the safest way to root and install a custom rom.
I am currently runnning ICS 4.0.3 with I9100TDULPB kernel on an aussie vodafone branded device.
Do i simply use odin to flash a stock samsung JB ROM, then flash Philz or Siyah JB kernel for root+cwm, then custom rom install via cwm?
I would also like to retain the option of flashing my carrier stock image incase of warranty purposes.
Cheers
Do i simply use odin to flash a stock samsung JB ROM, then flash Philz or Siyah JB kernel for root+cwm, then custom rom install via cwm?
Click to expand...
Click to collapse
Exactly !
PD: Remember to follow the installation instructions on the rom thread, otherwise u'll end in nasty bootloops
Thanks for the quick reply
So this will ultimately allow me to odin flash back to the stock ICS Vodafone Branded ROM later down the track?
Cheers.
strokemesilly said:
Thanks for the quick reply
So this will ultimately allow me to odin flash back to the stock ICS Vodafone Branded ROM later down the track?
Cheers.
Click to expand...
Click to collapse
yes, whenever u want to go back to complete stock, u just download ur stock firmware and flash it through odin
Awseome!
Thanks Poroto
After I flash new official rom my phone ? loose the network
I tried service mod but not work ,rooted and flash modem also not work
Please help
Salah77 said:
After I flash new official rom my phone loose the network
I tried service mod but not work ,rooted and flash modem also not work
Please help
Click to expand...
Click to collapse
You tried flashing back your former firmware ?
You have posted only half the story, what had been done to the phone previously? If your efs was patched, or kernel & modem, to fix botched repairs then you will have to repeat these patches each time you flash a firmware.
No. because I don't backup before flashing ??
Hello,
Tried all ROMS, none is working, below is the detail:
Installed
1 . CRISSCROSS ROM - no audio, while on call in earpiece and loudspeaker
2 . XtreStoLite-ROM-3.3.1-DPDP.zip ROM, Problem - AFter flash Phone model shows G925F AND NO CONNECTION TO NETWORK, EMERGENCY CALLS ALL TIME, TRIED flashing MODEM for g925w8 no LUCK
3. KIngfisher ROM, after flashing Kingfisher ROM, phone is STUCK AT
*KERNEL IS NOT SEANDROID ENFORCING* and phone will not turn ON.
SO , I guess there is NO working CUSTOM ROM fOR G925W8,canada. At the end I flashed stock BOJ7 AND Phone is working perfectly with 5 1 1 G925W8 BOJ7
I'm using the G925W8 on Xtrestolite. You must be missing something. I'm not sure what though
KAwAtA said:
I'm using the G925W8 on Xtrestolite. You must be missing something. I'm not sure what though
Click to expand...
Click to collapse
so why am I getting emergency calls?
1 can you tell me in detail that which steps did you follow?
2 what was your android version when you flashed rom?
3 what is your baseband verison now?
4 Was it rooted already?
5 Does this rom have spanish langauage? can you check for me?
Thank you
@Administr4tor
Custom ROMs for that work for W8
I've have confirmation from multiple users that my OZOP Rom is compatible and working flawlessly for the following devices Flat and Edge (rom is Edge based) F/I/T/W8. Could be more this are just the confirmed working devices.
Also OZOP is currently very active with development and actually about to be updated!
What ever Rom you decide is up to you.
Just letting you know there are options available.
Good luck
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Nothing seems to work, No matter what I have No network connection... on any rom..
AndroTechGuy said:
Nothing seems to work, No matter what I have No network connection... on any rom..
Click to expand...
Click to collapse
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
xstokerx said:
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
Click to expand...
Click to collapse
I could have sworn I was running 6.0.1 stock, Maybe I wasn't, but alright I'll try to find the radio. thanks mate
christopherrrg said:
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Click to expand...
Click to collapse
yes, I need updated call fix as the one I have is only for 5 1 1
Administr4tor said:
yes, I need updated call fix as the one I have is only for 5 1 1
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B4Gyz91x5k7gc2NBS2N5TFQwY0k/view?usp=drivesdk
Uploaded to my personal drive because I got tired of chasing the link. (Credits to author of zip, name inside.)
xstokerx said:
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
Click to expand...
Click to collapse
Every time I try to flash the stock 6.0.1 i get SW Rev error Device 4 Binary 3.
AndroTechGuy said:
Every time I try to flash the stock 6.0.1 i get SW Rev error Device 4 Binary 3.
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
xstokerx said:
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
Click to expand...
Click to collapse
I know how to do it, the phone is unlocked, so not sure what carrier I should be flashing on it. I legit just need it to be able to use the Network, currently have it custom rom'd but no network.
xstokerx said:
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
Click to expand...
Click to collapse
So the best I've been able to do is get it on a custom rom with no network connection at all. Seems like Im losing the ability to get it working. I tried Wind, telus stock 6.0.1's and i get the SW rev error, I've tried Rogers 5.1.1, and I get the same. Only thing that flashed on my device was "AP_G925W8VLU2AOG2_CL4808800_QB5701859_REV02_user_low_ship.tar" but it didn't boot past Galaxy S6 Edge logo, and recovery wasn't loading to try and factory reset to continue boot. I'm pretty sure this phone is dead.... I mean the custom rom was 6.0.1 with arter kernel, but no service... I'm lost...
christopherrrg said:
https://drive.google.com/file/d/0B4Gyz91x5k7gc2NBS2N5TFQwY0k/view?usp=drivesdk
Uploaded to my personal drive because I got tired of chasing the link. (Credits to author of zip, name inside.)
Click to expand...
Click to collapse
Thanks Sir.
Any ideas to my posts above?
guaranteed it's the bootloader and modem.
Once you flash the 6.0.1 ones via ODIN, then both crisscross and xtrolite should work. Crisscross, you will need to flash an independent audio fix which Christ have provided you in the post above.
Xtrolite (which I'm using with Twisted V4 Kernel) has it integrated so you shouldn't have any audio problems. Mind you, if you're still having trouble. Flash back 5.1.1 stock kernel and then let it update officially via samsung kies or OTA. Our phones now have 6.0.1 release so once you do that, you'll automatically have the new 6.0.1 bootloader and modem for our 925w8 phones. Then it'll be simple to flash a custom rom at that point.
Just update stock system to Marshmallow 6.0.1 (or flash stock 6.0.1 via Odin), then flash TWRP, do standard wipe with TWRP (Data, Cache and Dalvik), flash XtreStoLite via TWRP and everything will work
I have canadian S6 Edge and XtreStoLite is working very good
cripez said:
guaranteed it's the bootloader and modem.
Once you flash the 6.0.1 ones via ODIN, then both crisscross and xtrolite should work. Crisscross, you will need to flash an independent audio fix which Christ have provided you in the post above.
Xtrolite (which I'm using with Twisted V4 Kernel) has it integrated so you shouldn't have any audio problems. Mind you, if you're still having trouble. Flash back 5.1.1 stock kernel and then let it update officially via samsung kies or OTA. Our phones now have 6.0.1 release so once you do that, you'll automatically have the new 6.0.1 bootloader and modem for our 925w8 phones. Then it'll be simple to flash a custom rom at that point.
Click to expand...
Click to collapse
issue is I can't make the 6.0.1 stock files flash, always getting the SW rev error when cm.bin tries to flash, I've tried, Rogers, Wind, Telus stock files, nothing works. On CrissCross right now but not service... I want to get back to stock or at least make the bootloader work.
EDIT: Apparently using the most recent koodo stock, got me back to stock rom and with service! Now to root and do the custom rom properly! Thanks all!
christopherrrg said:
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Click to expand...
Click to collapse
THIS G925W8 is working perfectly in 5 1 1 , I was able to make calls to all networks including GSM and WCDMA, I checked IMEI status with code 197328640 and IMIE status is OK, then after I flashed 6 0 1 and then the IMIE status turns to NOT GOOD and I am unable to make calls and stuck at EMERGENCY CALLS, looks like this PHONE IS JACKED??
My Samsung S6 Edge after I flash custom ROM, I lost my imei and the phone can't connect network, anyone can help me? Thanks.
I try to flash stock ROM with odin but alway fails I try many time and always fails.
gareng05 said:
My Samsung S6 Edge after I flash custom ROM, I lost my imei and the phone can't connect network, anyone can help me? Thanks.
I try to flash stock ROM with odin but alway fails I try many time and always fails.
Click to expand...
Click to collapse
Did you backup your efs files before flashing? Or make a nandroid backup?
It's is very hard to repair lost or corrupted imei.
What error message in Odin?
gareng05 said:
My Samsung S6 Edge after I flash custom ROM, I lost my imei and the phone can't connect network, anyone can help me? Thanks.
I try to flash stock ROM with odin but alway fails I try many time and always fails.
Click to expand...
Click to collapse
sounds like your trying to flash wrong firmware in odin make sure u r flashing the same version and baseband that you were on originally
callumbr1 said:
Did you backup your efs files before flashing? Or make a nandroid backup?
It's is very hard to repair lost or corrupted imei.
What error message in Odin?
Click to expand...
Click to collapse
Just fails, in step boot image alway fails. I don't make backup efs.
TheMadScientist420 said:
sounds like your trying to flash wrong firmware in odin make sure u r flashing the same version and baseband that you were on originally
Click to expand...
Click to collapse
Yes, I download the ssme firmware, Indonesia firmware, I download version nauget, and mm I try both but still fails.
gareng05 said:
Yes, I download the ssme firmware, Indonesia firmware, I download version nauget, and mm I try both but still fails.
Click to expand...
Click to collapse
Hi,
First :
Witch custom Rom did you flash ?
Secondly :
Witch Rom did you come from before flash Custom one ?
edzamber said:
Hi,
First :
Witch custom Rom did you flash ?
Secondly :
Witch Rom did you come from before flash Custom one ?
Click to expand...
Click to collapse
With custom ROM Car HD 30.3
Before I flash I use version 28 car HD
Sent from my SM-C900F using Tapatalk
Ok.
Try to flash this by TWRP Recovery
https://www.mediafire.com/download/v51zbhckjd55um1
gareng05 said:
My Samsung S6 Edge after I flash custom ROM, I lost my imei and the phone can't connect network, anyone can help me? Thanks.
I try to flash stock ROM with odin but alway fails I try many time and always fails.
Click to expand...
Click to collapse
did u turn of samsung reactivation lock look in odin mode itll tell u