[Q] Help me to restore my ATT note i717 - AT&T Samsung Galaxy Note I717

Hi guys
I have a samsung galaxy note SGH-i717 that I installed CyanogenMod rom few months ago.
But, I suffering some of failures like suddenly turn off automatically and sometimes touch dosen't work.
That is why I'd like to restore my note to pure version of AT&T, then I want to get the official Jelly bean from AT&T.
I know how to uninstall CyanogenMod rom and retrive to my note to initialization.
(just install pure version of ICS to my note with odin right??)
but I don't know which rom should I download and install to my note. I mean which one is the pure rom that I have to install to get the official
Jelly bean thru Kies after make it to pure ICS.
Please let me know about the correct PURE ROM that possibly update to the official Jelly bean thru AT&T.
Thank you for your help in advance.

You can just install the AT&T JB update with ODIN. This will completely set your phone to full stock (stock android 4.1.2, stock recovery, stock modem), 100% stock. Back up anything (to your PC) you don't want to lose in case the process wipes everything out like pictures, apps, etc. You can find the ODIN file in several different threads. The SUPER EVERYTHING thread located in" Stickies" of the General section would be a good place to look.
Now, if you just want the stock rom only, there's more than one thread you can grab that at in the Development section which you can just flash like any other ROM.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

Put the phone in download mode, open Kies, plug phone into usb, in Kies select tools, firmware upgrade and initialization. Have your phones serial number handy (Can be found under the battery). Enter model number using all caps (SGH-I717) and follow the prompts. This will put the phone back to stock 4.1.2. You will loose root and recovery, but will be back to complete stock. By far the easiest, safest method to completely wipe and start over.

Re:
MoJoe277 said:
You can just install the AT&T JB update with ODIN. This will completely set your phone to full stock (stock android 4.1.2, stock recovery, stock modem), 100% stock. Back up anything (to your PC) you don't want to lose in case the process wipes everything out like pictures, apps, etc. You can find the ODIN file in several different threads. The SUPER EVERYTHING thread located in" Stickies" of the General section would be a good place to look.
Now, if you just want the stock rom only, there's more than one thread you can grab that at in the Development section which you can just flash like any other ROM.
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Could you link the correct web address that I should download as a pure ATT version?

Re:
fuena said:
Could you link the correct web address that I should download as a pure ATT version?
Click to expand...
Click to collapse
I'm confused that which one is pure rom for me...
I thought,
1. download pure rom (ICS? or JB?) for i717
2. launch the rom with Odin
3. after initialization then, upgrade to the latest version of JB from ATT
Is this right that I thought?

fuena said:
I'm confused that which one is pure rom for me...
I thought,
1. download pure rom (ICS? or JB?) for i717
2. launch the rom with Odin
3. after initialization then, upgrade to the latest version of JB from ATT
Is this right that I thought?
Click to expand...
Click to collapse
rsfin mentioned this and he's right.
To get PURE AT&T rom installed on your device you need to use kies!!
1. Open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL AT&T firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!

Several ways to get stock at&t. www.samfirm.com or use the file in the development section http://forum.xda-developers.com/showthread.php?p=41714172, or use the method mentioned above.

Related

[Q] Upgrading to ICS without using Kies?

After a day and a half of trouble and stress using Kies, I wonder if there is anyway of getting the stock AT&T ICS ROM (the one that I would get if I upgrade using Kies) without using Kies, like downloading and flashing in ODIN or some other method. Because using Kies is impossible.
Bump I really, really need this. I won't be able to update for weeks or a month if not.
also, when Kies recognizes it (1 in 1000 times) it says "Your device does not support software upgrading via Kies". I am unrooted and on stock rom.
http://forum.xda-developers.com/showthread.php?t=1763634 first link in post #5 unzip and place in pda slot in odin
or you could just root your phone and flash an ICS rom
XDA is no longer worth my time.
TimOster said:
OK, try Kies one more time. FIRST uninstall and reinstall the Samsung Mobile Device Driver. Just to be sure since you seem to be having connection problems.
Then...
Put Note into Download mode with no USB connected.
Start Kies (must be latest version ....12064_9...)
Plug in the USB (Note and PC)
Select > Tools > Firmware Upgrade and Initialization
THIS WIPES YOUR PHONE! But when it completes you are at the latest FW, currently ICS. It WILL do it even if Kies never says it connected first. I did this with my soft bricked Note that wouldn't boot completely.
Click to expand...
Click to collapse
Fixed, had tried that 10 times, but tried on another computer and it worked.
Also, now how to root and keep stock? Pref. A stock kernel. Or rerouted kernel. Or the easiest way
Is there a light at the end of the tunnel for me?
Buddy39914 said:
After a day and a half of trouble and stress using Kies, I wonder if there is anyway of getting the stock AT&T ICS ROM (the one that I would get if I upgrade using Kies) without using Kies, like downloading and flashing in ODIN or some other method. Because using Kies is impossible.
Click to expand...
Click to collapse
I have been trying to outsmart Samsung Kies since the update came out. I could not wait, like many of you guys, and decided to try out some custom ROMs, so I was not allowed to download the update because of the firmware message. I've downgraded to stock Gingerbread ROM, reset the binary flash counter, and wiped all the data on my phone, yet it is not enough.
When i did the *#1234# thing, I got PDA: I717UCLA1 (which was the same code as my CSC before I reset the flash counter), Phone: I717UCLC5 (the last ROM I was on), and CSC: I717ATTLA1 (what I think I need them all to be).
Since there has only been one official firmware version, 2.3.6, aside from the ICS I want, I can't make my phone think I have only been on stock firmware for the past two flashes. I'm totally screwed unless someone makes the Kies version flash-able through ODIN or tells me I'm an idiot and hands me the solution to cracking Kies on a silver platter!
Do the method that If you open Kies then go to Tools then Firmware upgrade & initialization, it asks for two pieces of info about the phone. The S/N & model number. Enter them exactly as is (back of the phone behind the battery) use SGH-I717 as model (capital letters). Worked for me. If it doesn't, try on another pc.
Also, now signal seems a lot weaker, fix?
You guys know how much easier it would have been to just to flash clockwork recovery mod right? You could download and flash roms without a computer or USB cord all day.
Sent from my SAMSUNG-SGH-I717 using xda premium
Buddy39914 said:
Do the method that If you open Kies then go to Tools then Firmware upgrade & initialization, it asks for two pieces of info about the phone. The S/N & model number. Enter them exactly as is (back of the phone behind the battery) use SGH-I717 as model (capital letters). Worked for me. If it doesn't, try on another pc.
Also, now signal seems a lot weaker, fix?
Click to expand...
Click to collapse
I'm on a Mac and when i click on Tools, i get this: Emergency firmware recovery, Firmware upgrade settings, and Install driver
When i go to Firmware upgrade settings, i see a blank box. I feel like the Kies update itself didn't work properly because it goes to 100%, asks for my computer password, then just freezes there until i click cancel at the bottom.
Help.

Updating Software International Version

Just got the GT-I9100 International version for my daughter (we are on AT&T). What do I need to know before checking and installing updates? I started to check for updates but it asks for my location and I read somewhere about people who downloaded U.S. version (in the U.S.) and installed it on their non-U.S. phones and they screwed up the machine. I believe the phone is from Germany (the initial language when we turned it on was German).
Thanks.
sbi1 said:
Just got the GT-I9100 International version for my daughter (we are on AT&T). What do I need to know before checking and installing updates? I started to check for updates but it asks for my location and I read somewhere about people who downloaded U.S. version (in the U.S.) and installed it on their non-U.S. phones and they screwed up the machine. I believe the phone is from Germany (the initial language when we turned it on was German).
Thanks.
Click to expand...
Click to collapse
There is no version of the i9100 sold in the US. What you probably read about is someone who flashed firmware or a ROM for the i777 (or some other different variant model) to an i9100. The i777 is the variant sold by AT&T. The i9100 is sold internationally.
As long as you stick to flashing things meant for the i9100, you should be fine.
Also, make sure of the exact model. There is also the i9100G variant, which is incompatible to the i9100 in terms of firmwares, kernels, and ROMs.
Just be careful, and if you intend on flashing anything, only use things meant for that exact model phone.
Thanks. I meant OTA update. If I check OTA update, isn't it getting updates from Samsung US or something like that?
BTW, these are the specifics of this device. I am also considering rooting it. Not sure what would be the best way though (I only have experience with rooting my I777) l.
Sent from my SGH-I777 using xda app-developers app
sbi1 said:
Thanks. I meant OTA update. If I check OTA update, isn't it getting updates from Samsung US or something like that?
BTW, these are the specifics of this device. I am also considering rooting it. Not sure what would be the best way though (I only have experience with rooting my I777) l.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
I don't believe you'll get any OTA updates on the i9100 while in the US. I haven't, in over a year. Besides, you can turn it off. (OTA)
Aint the updates controlled by CSC?? From the pic it seems to be XW -> UK i guess? So you should still get UK updates ...
Rooting is simple (My guide is to skip rooting and jump straight for custom rom, but the steps to root are the same)
1. Download any version of CWM from here
2. Get desired rom (kernel too if you want)
3. Place everything in Externel SDcard
4. Boot into stock recovery (Power+Home+Vol up)
5. Use stock recovery to flash CWM
6. Backup Current stock rom
7. Wipe the usual
8. Flash Custom rom (Or just kernel)
9. Reboot
10. ?? Profit ??
Now you got Custom rom or Kernel + Full stock rom backup (can always get stock rom from sammobile if you lose it)
-Grift- said:
Aint the updates controlled by CSC?? From the pic it seems to be XW -> UK i guess? So you should still get UK updates ...
Click to expand...
Click to collapse
As I said, I have had this phone for over a year, bought from the UK, and never had an OTA update. I am in the US, and am an AT&T customer.
Thank you both!
-Grift- said:
Aint the updates controlled by CSC?? From the pic it seems to be XW -> UK i guess? So you should still get UK updates ...
Rooting is simple (My guide is to skip rooting and jump straight for custom rom, but the steps to root are the same)
1. Download any version of CWM from here
2. Get desired rom (kernel too if you want)
3. Place everything in Externel SDcard
4. Boot into stock recovery (Power+Home+Vol up)
5. Use stock recovery to flash CWM
6. Backup Current stock rom
7. Wipe the usual
8. Flash Custom rom (Or just kernel)
9. Reboot
10. ?? Profit ??
Now you got Custom rom or Kernel + Full stock rom backup (can always get stock rom from sammobile if you lose it)
Click to expand...
Click to collapse
Did I understand correctly? This is just a temporary CWM? How do I get a permanent CWM?
sbi1 said:
Did I understand correctly? This is just a temporary CWM? How do I get a permanent CWM?
Click to expand...
Click to collapse
By flashing a kernel that has it included. You can do this with a CWM flashable package from within the temporary CWM. Recovery is part of the kernel package on this phone.
This is where it comes into play that you make sure you flash a kernel meant for the i9100.
Recoveryception bro
Not sure why I cannot find stock in sammobile.
ctomgee said:
As I said, I have had this phone for over a year, bought from the UK, and never had an OTA update. I am in the US, and am an AT&T customer.
Click to expand...
Click to collapse
Reason I am asking about update is that the phone keeps 'suggesting' to check for Software Update and when I start the update process it asks me to choose which country I am at. So I am wondering what will happen if I download an update OTA. I read somewhere that it comes from Samsung US and Samsung US only have updates for US models.
ctomgee said:
By flashing a kernel that has it included. You can do this with a CWM flashable package from within the temporary CWM. Recovery is part of the kernel package on this phone.
This is where it comes into play that you make sure you flash a kernel meant for the i9100.
Click to expand...
Click to collapse
Do I need specific kernel for LPI (current is I9100XWLPI), or any kernel for I9100?
sbi1 said:
Reason I am asking about update is that the phone keeps 'suggesting' to check for Software Update and when I start the update process it asks me to choose which country I am at. So I am wondering what will happen if I download an update OTA. I read somewhere that it comes from Samsung US and Samsung US only have updates for US models.
Do I need specific kernel for LPI (current is I9100XWLPI), or any kernel for I9100?
Click to expand...
Click to collapse
Depends. A custom kernel like Siyah will do. I don't think OTA works on this phone in the States.
I'm not a fan of all the advice that you're getting. The advice being given to you is for those who want to run custom firmware. You mentioned wanting the OTA (which won't likely happen for you as a user residing in the US). Simply download Samsung Kies and install on your desktop.
http://www.samsung.com/us/kies/
Once it detects your phone plugged in via USB, it will tell you which firmware you're on, and what the most recent firmware for your model is. If the most recent is newer than what you have, it will prompt you to update.
EDIT: See attached image for a screenshot of my Kies w/my SGS2 i9100.
jaykresge said:
I'm not a fan of all the advice that you're getting. The advice being given to you is for those who want to run custom firmware. You mentioned wanting the OTA (which won't likely happen for you as a user residing in the US). Simply download Samsung Kies and install on your desktop.
http://www.samsung.com/us/kies/
Once it detects your phone plugged in via USB, it will tell you which firmware you're on, and what the most recent firmware for your model is. If the most recent is newer than what you have, it will prompt you to update.
EDIT: See attached image for a screenshot of my Kies w/my SGS2 i9100.
Click to expand...
Click to collapse
Well, at the end of the day I do want to root and maybe even install a custom rom (trying to convince my daughter that it's safe ). I did root and run Shostock on my I777, but I don't have any experience with the I9100.
I don't necessarily want the OTA update, I was just worried that if I try to update it (currently 4.0.3...not sure if there is a newer version at all), the OTA will put something that does not belong there. As I said, I read somewhere about Samsung US downloading US version that doesn't work with the I9100.
If you want to root and rom, this is the right place. If you or your daughter are more comfortable with a stock ROM, get Kies. It's not going to download the US firmware. Here's why.
-you plug it in and it detects the phone, literally saying, "Hey, I have an i9100 here, not an i-777!"
-It looks for your current firmware, literally saying, "Hmm, I see UK 4.0.3 here, let's see if there's more current UK firmware."
-It then finds the more current firmware for what is currently installed, "Egads! There's a 4.0.4 UK firmware!"
Anyway, there is in fact a more recent firmware for your device (4.0.4) and it contains numerous bug fixes. I'd recommend installing Kies and running that update. Then, if you haven't done much with the phone yet, factory reset it to clean out any left over garbage. It will give you a smooth experience. And for what it's worth, I've had no desire to root/rom my SGS2. On my Incredible, not only did I root/rom, but I had my own project (Liberation) that I ran on these very boards. With the SGS2, there's been no need for me to do that.
Some like the "pure google experince"
So indeed we got an update through Kies. Thank you.
BTW - it is a German phone. It came with, and re-installed with the update, some German links/apps (I removed them when we first started it). For some reason the updated stock is not shown in the Kernel version as it did before (see pic).
Question: I am using TB on my I777. Maybe I'll skip the root on her phone, she will be going to college and I won't be around to fix things if needed . Is there an app to backup user apps without root?
sbi1 said:
So indeed we got an update through Kies. Thank you.
BTW - it is a German phone. It came with, and re-installed with the update, some German links/apps (I removed them when we first started it). For some reason the updated stock is not shown in the Kernel version as it did before (see pic).
Question: I am using TB on my I777. Maybe I'll skip the root on her phone, she will be going to college and I won't be around to fix things if needed . Is there an app to backup user apps without root?
Click to expand...
Click to collapse
Since you are on german firmware, I'd recommend learning how to use ODIN as your next step. Switch it over to UK firmware. All apps are in English. Once you use Odin to switch over to a different country's firmware, Kies will only detect your device as being from the new country, and only look for compatible firmware within that country. This is something that you can do that won't require root, won't risk voiding your warranty (if you follow the simple instructions), and can be a precursor to root/romming if your daughter wants to go that route.
jaykresge said:
Since you are on german firmware, I'd recommend learning how to use ODIN as your next step. Switch it over to UK firmware. All apps are in English. Once you use Odin to switch over to a different country's firmware, Kies will only detect your device as being from the new country, and only look for compatible firmware within that country. This is something that you can do that won't require root, won't risk voiding your warranty (if you follow the simple instructions), and can be a precursor to root/romming if your daughter wants to go that route.
Click to expand...
Click to collapse
Thanks jaykresge. I am familiar with Odin. As I mentioned - my I777 is rooted. What I don't know though is how/where to get the correct UK firmware to replace the one I have and "UK'ing" the device

[Q] It's so slow with 4.1.2!

Hello everyone,
I heard that if I root the device, I can remove all the junks added by AT&T and Google: can I just have the bare-bone Android OS on the device in that case?
If so, would you mind indicating me what the best rooting procedure is and where I can look-up the steps?
Thanks you!
You could just disable the at&t and Samsung stuff in the application manager settings. You can also root your phone and flash an aosp based ROM. Although some phones don't like aosp very much
Sent from my SGH-I717D using xda app-developers app
Thanks triavq but this is tedious.
triavq said:
You could just disable the at&t and Samsung stuff in the application manager settings. You can also root your phone and flash an aosp based ROM. Although some phones don't like aosp very much
Sent from my SGH-I717D using xda app-developers app
Click to expand...
Click to collapse
I'm not familiar with the Android Open Source Project so I'd really like to have the opinion of someone who did root the device and who's happy with the result.
You don't have to root the phone to flash a debloared rom.
Don't quote, reply. If you quote, edit.
Thanks but I'm still waiting for the URL of a page that would clearly explain how to do that for a newbie like me (just rooted a Nook a long while ago...).
Yves.Dolce said:
Hello everyone,
I heard that if I root the device, I can remove all the junks added by AT&T and Google: can I just have the bare-bone Android OS on the device in that case?
If so, would you mind indicating me what the best rooting procedure is and where I can look-up the steps?
Thanks you!
Click to expand...
Click to collapse
I am a fan of the pure stock AT&T rom frankly because everything works! Sure I'm missing some frills that version 4.2.2 has but oh well. I updated my phone with kies to ver 4.1.2, installed twrp recovery, rooted, and removed a lot of bloat. I'm pretty happy with my device now. I'll list below the steps I did.
To update to latest firmware (from any rom even rooted)
1. Open http://www.samsung.com/us/kies/
2. Click Download for windows
3. Install Kies
4. Open Kies
5. Write down serial number of phone device (it's under battery)
6. Plug in phone to PC and power up phone while HOLDING volume down
7. Once you see the download screen on phone press volume up
8. On PC in Kies click "tools - Firmware Upgrade and Initialization"
9. Type in SGH-I717 (all caps)
10. Type in serial number
11. Follow directions
12. Once phone reboots you will have the latest OFFICIAL AT&T firmware (JB 4.1.2 as of 6-1-2013)
13. Perform a factory data reset before proceeding (it helps it run smoother)
14. Type in google info and enjoy!
To root the stock 4.1.2 rom
1. Use Odin 1.85 in Admin Mode for Windows users.
2. Install TWRP 2.5 via PDA settings.
3. Reboot phone into Recovery.
4. Install SuperSU via the Zip.
5. Reboot phone and viola. SuperSU is there and works.
Download TWRP recovery the Odin Method here:
http://www.teamw.in/project/twrp2/96
Download SuperSU located here:
http://download.chainfire.eu/204
Your now on the latest software for the i717 and rooted.
To remove bloat my favorite app is Titanium backup pro. I always "feeze" an app, then use the phone for a day or 2 to see if anything doesn't work properly. If it does unfreeze it to fix. Stay away from freezing system settings. There are very few you can get away with freezing. Some of the apps I froze you may or may not want to depending on how you use your phone. Like for example I don't use allshare or quickpic but you might. I'll try to list what I removed thru titanium backup. But I might of uninstalled some and cant remember. I'll add to the list as I remember, freeze more, or if someone add's in future posts.
Froze or uninstalled apps:
Allshare play
Allshare service
Att drive mode
Att familymap
Att hot spots
Att locker
Att ready 2 go
Att smart wifi
Att navigator
Aurora
Blue sea
ChatOn
City ID
Device Help
Favorite apps 1.0
Featured Apps 2.0.47.256
Google search 1.0 (I left google search 2.5.8.... alone but freeze it from time)
Kies Air
Kies via wifi
Media hub
Ocean weather
S Suggest
Samsung account 1.4
Samsung backup provider
Samsung Browser sync
Samsung Calendar sync
Samsung Cloud data
Samsung Contact SyncAdapter
Samsung Push Service
Samsung Snote SyncAdapter
Samsunc Syncadapters 2.5.3
ScloudStarter
Try panning
Weather widget
weather widget main
windy weather
**BACKUP FIRST! **
*** Always freeze and test for a while before uninstalling.***
Thanks a lot for the detailed answer!
Exactly what I was looking for.
Looks like I'll have some fun during the week-end...
rangercaptain said:
You don't have to root the phone to flash a debloared rom.
Don't quote, reply. If you quote, edit.
Click to expand...
Click to collapse
Unless you want to flash a AOSP rom if you want to you have to root, unlock, and add a recovery and then flash the ROM.
Sent from my LG-LS970 using xda app-developers app
One question: as I'm already on 4.1.2 (see information below), can I just skip the step about installing it via what you described?
Baseband version: I717UCMD3
Kernel Version: 3.0.31-1117019, [email protected] #1, SMP PREEMPT Sat Apr 6 07:12:29 KST 2013
Build Number: JZO54K.I717UCMD3
One question: as I'm already on 4.1.2 (see information below), can I just skip the step about installing it via what you described?
Baseband version: I717UCMD3
Kernel Version: 3.0.31-1117019, [email protected] #1, SMP PREEMPT Sat Apr 6 07:12:29 KST 2013
Build Number: JZO54K.I717UCMD3
Yves.Dolce said:
One question: as I'm already on 4.1.2 (see information below), can I just skip the step about installing it via what you described?
Baseband version: I717UCMD3
Kernel Version: 3.0.31-1117019, [email protected] #1, SMP PREEMPT Sat Apr 6 07:12:29 KST 2013
Build Number: JZO54K.I717UCMD3
Click to expand...
Click to collapse
Yes just skip to the root part with odin.
The other thing you could do is do a factory reset. I had a terrible experience with JB at first and had to factory reset twice. Now my phone is snappy (really snappy) and I have the stock ROM and I am rooted. There are multiple reports that flashing the update does not get rid of all the bits and pieces from prior ROMs, which may have the effect of slowing down performance. This I got directly from Samsung (although I paraphrased it here).
I suggest just reading the super everything thread about 10 times if you are new to rooting/flashing. It is in the general forum. I was a complete n00b about 2 months ago, now I flash roms because I'm bored while driving in my car My personal opinion is to install twrp/flash supersu, then make a backup. Once you have that backup, go crazy and flash away. Just make sure you factory reset before flashing new roms. Don't do advanced, and if you do, don't wipe emmc or sdcard. emmc hosts that nice backup you just made. Even with the bugs in most of the roms, they are 100x better than stock, and much faster. Even after taking all the AT&T and Samsung garbage out, it is still slower than a custom rom. I just tried stock again 2 days ago, wanted to give 4.1.2 a twirl, and it was much slower than the revolt or carbon I normally run. Have fun and good luck!
jonahly said:
Unless you want to flash a AOSP rom if you want to you have to root, unlock, and add a recovery and then flash the ROM.
Click to expand...
Click to collapse
You don't have to unlock a phone to flash a rom. You unlock only if you need to use a different carrier's sim card.
You don't have to root a phone to flash a rom. You only root if you need to access the main file system ( access the root directory ).
You don't have to flash a recovery to flash a rom. You can flash a rom using Samsung software Odin3, or Samsung Kies, or a linux version Heimdall. You flash a custom recovery to make backups and have a convenient method to flash roms and do maintenence.
But to uninstall the ATT/Samsung apps, rooting is the path. Right?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Yes then install Titanium Backup app. Freeze the apps you want to get rid of to be sure they aren't essential, then afer a fewbdays delete them.
But you can just flash the stock debloated JB rom.
Don't quote, reply. If you quote, edit.

[RESOLVED] Help upgrade a SHV-E160S 4.0.4 IMM76D.VH29 to latest??

Hi guys!
This is my first time to post a thread in this forum, I just bought a Samsung Note with model SHV-E160S, Android Version 4.0.4 and Build# IMM76D.VH29. I know that this is a Korean Variant and I'm using it here in Philippines (I can send SMS -- Openline). I don't know if this phone is already rooted, I don't know how to check.
What I'm trying to accomplish is to upgrade this phone from 4.0.4 to 4.1.2 then later on upgrade it to Android Lollipop 5.1 and I don't know how. It will be a great pleasure if someone help me or direct me on what should I do.
I'm totally new to android devices and I'm not familiar on how to upgrade,update or root an android device.
Thanks!
Hello guys, any ideas? Thanks!
jakeortega said:
Hi guys!
This is my first time to post a thread in this forum, I just bought a Samsung Note with model SHV-E160S, Android Version 4.0.4 and Build# IMM76D.VH29. I know that this is a Korean Variant and I'm using it here in Philippines (I can send SMS -- Openline). I don't know if this phone is already rooted, I don't know how to check.
What I'm trying to accomplish is to upgrade this phone from 4.0.4 to 4.1.2 then later on upgrade it to Android Lollipop 5.1 and I don't know how. It will be a great pleasure if someone help me or direct me on what should I do.
I'm totally new to android devices and I'm not familiar on how to upgrade,update or root an android device.
Thanks!
Click to expand...
Click to collapse
Hello guys, any ideas? Thanks!
You'll be able to find your firmware here https://mega.nz/#F!IxJTDDQQ!TTgzxjX8d7EnzemoIj0ogg
4.1.2 was the last official update from Samsung for your device. If you want to update to newer than that, it will have to be done via updating with a custom recovery and custom rom, such as TWRP recovery and CyanogenMod 11 or 12/12.1.
Follow upgrade instructions from here http://forum.xda-developers.com/showthread.php?t=1424997 and sub your firmware file instead of N7000.
es0tericcha0s said:
You'll be able to find your firmware here https://mega.nz/#F!IxJTDDQQ!TTgzxjX8d7EnzemoIj0ogg
4.1.2 was the last official update from Samsung for your device. If you want to update to newer than that, it will have to be done via updating with a custom recovery and custom rom, such as TWRP recovery and CyanogenMod 11 or 12/12.1.
Follow upgrade instructions from here http://forum.xda-developers.com/showthread.php?t=1424997 and sub your firmware file instead of N7000.
Click to expand...
Click to collapse
Thank you es0tericcha0s for this information.
What I'm trying to do right now is updating my SHV-e160s from 4.0.4 to 4.1.2 using Kies v2.6. Unfortunately, I'm getting this error "Failed to run firmware upgrade: unknown error.". Until now, I'm afraid to update my firmware manually as I don't have much knowledge to do that.
1) Download firmware and Odin
2) Open Odin as admin
3) Load firmware in PDA or AP slot depending on which version of Odin used
4) Boot to Download Mode and plug in your phone
5) Once Odin recognizes it ( will show highlighted - COM:xx where "xx" is any number, doesn't matter which ones) hit start
6) Grab a drink and a snack and come back in 10 minutes or so
7) If device bootloops, reset in recovery
Once the files are downloaded, the whole process takes less than 10-12 minutes or so. Everything you need is in the guide I linked to besides the firmware you need, which is in the Mega link. If you need a video guide, there are dozens on YouTube. I find it much easier to use than Kies and once you have it working, then there are not many things you will do that restoring with Odin and a factory reset won't get you out of.
es0tericcha0s said:
1) Download firmware and Odin
2) Open Odin as admin
3) Load firmware in PDA or AP slot depending on which version of Odin used
4) Boot to Download Mode and plug in your phone
5) Once Odin recognizes it ( will show highlighted - COM:xx where "xx" is any number, doesn't matter which ones) hit start
6) Grab a drink and a snack and come back in 10 minutes or so
7) If device bootloops, reset in recovery
Once the files are downloaded, the whole process takes less than 10-12 minutes or so. Everything you need is in the guide I linked to besides the firmware you need, which is in the Mega link. If you need a video guide, there are dozens on YouTube. I find it much easier to use than Kies and once you have it working, then there are not many things you will do that restoring with Odin and a factory reset won't get you out of.
Click to expand...
Click to collapse
Alright, I'll try these steps immediately and will comeback for the result. Thanks again.
es0tericcha0s said:
1) Download firmware and Odin
2) Open Odin as admin
3) Load firmware in PDA or AP slot depending on which version of Odin used
4) Boot to Download Mode and plug in your phone
5) Once Odin recognizes it ( will show highlighted - COM:xx where "xx" is any number, doesn't matter which ones) hit start
6) Grab a drink and a snack and come back in 10 minutes or so
7) If device bootloops, reset in recovery
Once the files are downloaded, the whole process takes less than 10-12 minutes or so. Everything you need is in the guide I linked to besides the firmware you need, which is in the Mega link. If you need a video guide, there are dozens on YouTube. I find it much easier to use than Kies and once you have it working, then there are not many things you will do that restoring with Odin and a factory reset won't get you out of.
Click to expand...
Click to collapse
Hello, sorry I forgot to ask, will this root my device? I'm afraid I might bricked it.
No, this is just the official update. As long as the download is good and you follow those directions, you won't do anything that won't be easily recoverable if it doesn't work right away. Soft bricking is not a big deal and nothing you would do here would cause anything worse unless you unplug the phone in the middle of something important.
---------- Post added at 09:23 AM ---------- Previous post was at 09:20 AM ----------
And because you'll probably ask... It's easy to root. Just download Chainfire's SuperSU zip, put it on your phone's storage and use Odin to install TWRP recovery (just like you do with the whole firmware package) , boot to recovery before it boots to the OS and install the zip. Reboot and enjoy.
es0tericcha0s said:
No, this is just the official update. As long as the download is good and you follow those directions, you won't do anything that won't be easily recoverable if it doesn't work right away. Soft bricking is not a big deal and nothing you would do here would cause anything worse unless you unplug the phone in the middle of something important.
---------- Post added at 09:23 AM ---------- Previous post was at 09:20 AM ----------
And because you'll probably ask... It's easy to root. Just download Chainfire's SuperSU zip, put it on your phone's storage and use Odin to install TWRP recovery (just like you do with the whole firmware package) , boot to recovery before it boots to the OS and install the zip. Reboot and enjoy.
Click to expand...
Click to collapse
Hello again es0tericcha0s, I haven't tried the instructions that you gave me yesterday as I'm still downloading the firmware, last night I encountered an issue after enabling my Bluetooth, something like "NFC Service has stopped." just keeps on popping up. So I turned off the bluetooth then restarted my phone, it went well for a while.
After that, I enabled my 3G Cellular Data to check what was NFC service error is, after a few minutes, I lost my signal, phone turned to No Service, then in Settings -> About Phone, I got an Unknown Baseband.
EDIT
I got No Service since last night up until now.
EDIT Oct. 13, 2015 9:49 AM +08:00 Manila Time
I manage to update my phone from ICS 4.0.4 to JB 4.1.2. But still, my baseband is Unknown and I have no signal.
If it did that before you tried to flash anything...that doesn't sound good. Hard to say without testing it, but kind of sounds like the baseband chip (hardware issue).
es0tericcha0s said:
If it did that before you tried to flash anything...that doesn't sound good. Hard to say without testing it, but kind of sounds like the baseband chip (hardware issue).
Click to expand...
Click to collapse
I also though of that, hopefully not.
When I first got the phone, my gf sent me our pictures via bluetooth , no issues occured. After a while, I noticed that there are so many photos of the previous owner (around 1000+) and mp3s (around 1000+ also). So I connected the phone via usb to my pc and deleted all those pictures and mp3s inside the My Computer -> SHV-E160S -> Phone (Computer\SHV-E160S\Phone). After doing so, I started to encouter some issues, when enabling the bluetooth, the phone hangs and reboots then the error 'NFC service has stopped' keeps on popping up, until it went Unknown Baseband.
Now, the phone keeps on rebooting similar to the symptoms that it gets when baseband version is unknown.
I'm looking for solutions to fix the unknown baseband and saw the Back up and Restore EFS, I just need to root the device to try this fix. Maybe I'll post an update whether if I manage to solve this problem or not, if it didn't fix the issue then maybe the problem is the baseband chip. what a crap!
This is my reference for the EFS Fix
http://techbeasts.com/2014/07/13/fix-samsung-galaxy-unknown-baseband-version-guide/
Thanks!
Rooting will be easy. Just install TWRP with Odin and use the SuperSU zip from Chainfire. Process should take like 5 minutes once everything is downloaded.
es0tericcha0s said:
Rooting will be easy. Just install TWRP with Odin and use the SuperSU zip from Chainfire. Process should take like 5 minutes once everything is downloaded.
Click to expand...
Click to collapse
So I need to install TWRP first before rooting the device? Also I'm planning to use a rooted stock firmware which is 4.1.2, I just don't know the difference between UH24 and MH2, I've read that UH24 is already old and it's better to use a MH2 build and what is the Recovery UH24/MH2?
EDIT:
I forgot, I cannot check my current Baseband since it is still unknown.
EDIT: 12:30PM +8:00
I managed to get my Build#, it is MH2, I'm currently looking for a rooted 4.1.2 MH2 download link.
Way faster and easier to use the method I outlined, but either way should work.
es0tericcha0s said:
Way faster and easier to use the method I outlined, but either way should work.
Click to expand...
Click to collapse
Sorry, I'm really a root virgin here. While following your advise, I'm also currently looking at this guide -> http://forum.xda-developers.com/showthread.php?t=1924535. I'm done downloading Tegrak for MH2, a small problem I encountered here is I don't have a folder named 'sdcard' in my phone, so I created one and copied the 'Kernel' .zip, also I copied it to usbStorage folder.
I'm about to flash the 'Recovery' .tar to my phone. Hoping a success result
Should be fine. Your phone's internal storage is seen by the OS as /sdcard. Doesn't matter where you put the file as long as you remember where it's at so you can navigate to it through recovery to install.
es0tericcha0s said:
Should be fine. Your phone's internal storage is seen by the OS as /sdcard. Doesn't matter where you put the file as long as you remember where it's at so you can navigate to it through recovery to install.
Click to expand...
Click to collapse
Oh crap, I didn't thought of that. Installing 'Kernel' .zip now.
jakeortega said:
Oh crap, I didn't thought of that. Installing 'Kernel' .zip now.
Click to expand...
Click to collapse
Finally! I'm done rooting my phone, though I encountered another issues again. My Menu Button and Back Button does not work.
UPDATE: 4:08PM +8:00GMT
I think I found the problem as to why my Menu button and Back button doesn't work. I'v check my Baseband and it is -> E160SKSJMH1 and my Build # is -> JZO54K.E160SKSJMH2. Am I using a wrong FW as supposed to what I should be using? Which build should I install, the MH1 or the MH2?
Also, the Tegrak Kernel I've used is Build 48 for SHV-E160S MH2. I've also tried factory resetting the phone but the issue still exists.
Thanks!
UPDATE: 4:41PM +8:00GMT
Managed to fixed the issue by updating my Touch Firmware. Cool!

get i9195 back to stock

Greetings. My Samsung S4 Mini (i9195 LTE) has (a) clockwork recovery, (b) cyanogenmod 13 - android 6.
Could you please tell me what the steps are to revert it to as an original operating condition/environment as possible? I would prefer Jellybean 4.2.2 but if that is not doable, then Kitkat would have to do. I have no intention of selling it or taking it to a service station, just would like to take it back to the way it worked when I first bought it.
Thank you in advance.
egmus said:
Greetings. My Samsung S4 Mini (i9195 LTE) has (a) clockwork recovery, (b) cyanogenmod 13 - android 6.
Could you please tell me what the steps are to revert it to as an original operating condition/environment as possible? I would prefer Jellybean 4.2.2 but if that is not doable, then Kitkat would have to do. I have no intention of selling it or taking it to a service station, just would like to take it back to the way it worked when I first bought it.
Thank you in advance.
Click to expand...
Click to collapse
You will need to download Odin, the drivers for your device and the correct variant of the stock firmware (link) for your device. Once these are downloaded use Odin to flash the firmware as you would for any other Samsung device to restore the stock firmware. This will not reset the Knox flag but it will replace the custom firmware and recovery with stock variants.
TechMinerUK said:
You will need to download Odin, the drivers for your device and the correct variant of the stock firmware for your device. Once these are downloaded use Odin to flash the firmware as you would for any other Samsung device to restore the stock firmware. This will not reset the Knox flag but it will replace the custom firmware and recovery with stock variants.
Click to expand...
Click to collapse
Thank you for your response. I have installed the drivers and repeatedly tried with odin. Now, odin recognizes the device, I set it into download mode and engage the flashing process. Four or five odin messages down, it stops and reports some failure message. I have tried various stock roms, both jellybean and kitkat but odin always terminates prematurely. The only thing I can do after that is return to cw recovery and cyanogenmod_13/android_6 which may look "cool" and handle battery a little better, but, in my opinion, leaves a lot to be desired when it comes to camera handling and playing music.

Categories

Resources