Hey guys.
So the phone had this problem where it was stuck on the samsung Logo, so i flashed a complete stock Jellybean build (all correct and stuff, not a beginner ), also wiped data from recov just in case
Now heres the problem...
when the phone boots up, it goes through the first time "Optimizing Apps", but once it reaches a certain number, ittl reboot the phone then start going through it again and again.
Anyway i could somehow make the phone actually boot? Any help?
Thanks in advance
If you can enter recovery, do the wipes and a factory reset, then try to boot.
If you're in the same situation, flash the stock JB update using Odin and a pc. That will wipe your phone. Then flash TWRP for your recovery using Odin and a pc.
You will need to have the correct type of file for Odin.
Related
Ok so I'm fairly new to the rooting scene, and these forums, but so far everything has been pretty good, except for one small problem. I installed a custom boot logo, and afterwards my phone was lagging a bit. I contacted the boot logo programmer, with no response, so I decided to wipe my system and use the backup from right before I installed the custom boot logo. Unfortunately, the boot logo has not changed, and my phone 'fails' whenever I try to flash something from Odin. Anyone know what to do in this situation.
If you want to do a full wipe of you device,cos it sounds like tha boot logo is corrupt,then boot to recovery and wipe cache partition and dalvik cache.then go to "storage and mounts" and format system,data and cache.Select "Go Back" and factory reset your phone and reboot.If it doesnt go past the boot logo after 1min then pull the battery,put it back in and turn it back on.Its a pain in the arse but it will completely clean up your device and if you where rooted you will need to probably reroot but berfore hand plug in your phone to your PC so it gets recognized again.
EDIT:Just incase,first of all download titanium backup from the market and backup your apps!!!!
Sting Rray said:
Ok so I'm fairly new to the rooting scene, and these forums, but so far everything has been pretty good, except for one small problem. I installed a custom boot logo, and afterwards my phone was lagging a bit. I contacted the boot logo programmer, with no response, so I decided to wipe my system and use the backup from right before I installed the custom boot logo. Unfortunately, the boot logo has not changed, and my phone 'fails' whenever I try to flash something from Odin. Anyone know what to do in this situation.
Click to expand...
Click to collapse
You need to wipe usb storage, sd card, then put phone in download mode, flash stock ROM using Odin. You need to fully wipe everything.
Sent from my Sexynos SGH-i777 using XDA Premium.
I've trying reflashing the stock ROM and kernel; however, it gives me a FAIL and says can't open the serial (COM) port.
I have solved the problem by closing Samsung Kies and wiping the system, thanks for all the help offered.
Hi all,
I am trying to update my phone to a new firmware using odin. I am following the instructions in this thread. However after odin has done its thing, it displays "PASS!", my phone reboots but then hangs on the boot animation. I have left it for about 20 mins and tried reflashing the rom with no luck.
I have also tried another firmware, but its gets stuck in a half bootloop (repeating the boot animation)
Does anyone know what might be causing this and how I can fix it?
Thanks
Aaron
Boot to recovery and wipe cache see if that works, if it still bootloops you'll need to boot to recovery and do a factory reset.
I booted into recovery and wiped everything, and it works now.
Thanks
anyone know how to flash back to stock rom from slimbean? i flash slimbeam onto my phone, and i wanna flash it back to stock now... i found it on google saying that just direct flash with odin, but my phone now is stuck on start up page with a samsung logo in the middle. is my phone bricked? :crying:
First off, what phone do you have? I.e. what model of the SGS3?
Secondly, if it doesn't proceed from the first boot logo, try going into your recovery (if you have one) with Power+Home+Volume Up and then select to factory reset your phone. The easiest would be to flash cf-root, which provides clockworkmodrecovery, and then boot into it and select to wipe data.
I suspect that it hanged at the boot logo because ODIN doesn't wipe any data while flashing, so the left-over data from Slimbean is still there.
it worked!
Theshawty said:
First off, what phone do you have? I.e. what model of the SGS3?
Secondly, if it doesn't proceed from the first boot logo, try going into your recovery (if you have one) with Power+Home+Volume Up and then select to factory reset your phone. The easiest would be to flash cf-root, which provides clockworkmodrecovery, and then boot into it and select to wipe data.
I suspect that it hanged at the boot logo because ODIN doesn't wipe any data while flashing, so the left-over data from Slimbean is still there.
Click to expand...
Click to collapse
THANKS!!! : D it worked. it's back to stock now.
yeah the update process with odin on the SGS3 requires reseting factory after flashing
the only problem is all ur files are gone noow (music,pictures)
Hey,
First off i hope i have put this on the right sub forum.
I've been stupid (I Think) I've olso looked around on the forum and the [READ THIS] Got a Boot Loop? Don't post a New Thread!
topic.
I'm using my SGS2 for a year now and was using the ressurexionRimix rom for a while.
I've been plaing around with my phone so i got lots of folder that were not used etc, so I wanted to get it back to factory settings, here is when all went down.
Via Settings-Backup and recovery i gave my phone a factory reset (while using the latest ressurexionremix rom, i think this is the misstake i made) When my phone went into the reboot is got stuck on the splash screen, it kept reapeeting the boot animation.
The second mistake i mad was not puting back my back-up but thought well i want it back to it's first state so i'll use ODIN to flash the stock ROM onto it. now, 4 hours later and about 10 trys with diferent versions of the stock roms i'm still stuck on the boot screen.
I've also tryd flashing a cwm so i could get in cwm recovery, this also without any luck
Does anyone have a idea what to do!?
go back to recovery - mounts andstorage and format the following :
cache, system, data, sdcards if you have it in recovery. reboot
you have a bkank screen as your phone has been wiped. reboot into download mode.
Connect odin and flash a stock rom. reboot and your phone should work provided that you have not damaged the flash chip on the motherboard.
Is this in CWM? the problem is i dont have that anymore because i've flashed it toc stok. I now get in the Android system recovery
The option i get there ar:
Reboot system now
apply update from external storage
Wype data/factory reset
Wipe cache parition
apply update from cash
test redbend fola[FS]
Will try this, thank..will let you know if it worked
Wiped data/factory reset and cache after this i ebooted my phone and i got the message installing application, now i'm in the setup menu. Looks like it is working.
Did'nt realice there was a recovery besides CWM Thank yoy so much Cosmic Blue!!! You saved my life!!
Hi All,
OK, so I've soft bricked my S3, or so I hope.
It was fine when I took it off charge this morning, but at work I noticed that my pocket was getting oddly hot..
Took my phone out my pocket and the phone was stuck on the boot screen (the first one).
Went into recovery and tried a cache wipe, dalvik wipe, still the same, then tried a wipe data/factory reset, and the system kept rebooting before it finished the wipe!
Then I tried flashing the OMEGA ROM I had on my SD card and the aroma installer would start, but as soon as it tried to do any sort of wipe at the start, the phone rebooted again!!
So after this I decided to download the latest stock firmware from samsung-updates.com and flash via odin. The firmware flashed OK but then the phone would not start again, still stuck at the boot logo.
I then tried to flash the CWM recovery again from the samsung galaxys3 toolkit folder on my C: drive. When trying to flash this, it kept getting stuck at "NAND Write Start!!" and would not go any further. Now whatever I try and flash via ODIN it gets stuck at NAND Write Start!!
I also have tried flashing the latest .pit along with and separely to the ROM with the "Re-Partition" button checked in ODIN and it just fails every time.
Is there anything I can do? Or if I have to send it to the service centre, is there a way to reset the binary counter from download mode? :/ Mine is saying 7 counts.
anyone?