Hi all, 15 minutes ago, I plugged the razr to the charger and I got a warning about "No sim card". I've tryed everything ( reboot, reboot on safe mode, I removed and reinserted the sim), but anything worked. I'm really afraid that could be a phone problem. I've read that It could be possibile a sim problem. Can someone help me ? Sorry for my english and thanks in advice.
Cheers.
Stefano
campo8558 said:
Hi all, 15 minutes ago, I plugged the razr to the charger and I got a warning about "No sim card". I've tryed everything ( reboot, reboot on safe mode, I removed and reinserted the sim), but anything worked. I'm really afraid that could be a phone problem. I've read that It could be possibile a sim problem. Can someone help me ? Sorry for my english and thanks in advice.
Cheers.
Stefano
Click to expand...
Click to collapse
Ok guys...It's magically self-resolved. Thanks anyway. I was really worried.
Cheers
Stefano
Hello Stefano,
That happened to me a couple of times after flashing. Baseband isn't flashed or loaded correctly, that's why you get NO SIM warning. A soft restart usually fixes the issue.
Semseddin said:
Hello Stefano,
That happened to me a couple of times after flashing. Baseband isn't flashed or loaded correctly, that's why you get NO SIM warning. A soft restart usually fixes the issue.
Click to expand...
Click to collapse
I noticed some trouble with gsm signal. Sometimes I lost signal and I have to reboot the phone. I tryed a soft restart ( Power button + Vol down ) and now it seems work but I'll wait some hours to be sure. Can I reflash only baseband ? When I upgraded my phone I've followed this thread, but I used fastboot from linux to flash 672.180.41.XT910.Retail.en.EU ( I were on 672.180.41.XT910.Retail.en.EU but I deleted some apps so I reflashed just to be sure ), and I flashed one .img file at a time from command line ( radio.img, cdrom_signed etc.. ). I didn't have any problem until last nigth. Thanks for help.
Cheers.
Stefano
campo8558 said:
I noticed some trouble with gsm signal. Sometimes I lost signal and I have to reboot the phone. I tryed a soft restart ( Power button + Vol down ) and now it seems work but I'll wait some hours to be sure. Can I reflash only baseband ? When I upgraded my phone I've followed this thread, but I used fastboot from linux to flash 672.180.41.XT910.Retail.en.EU ( I were on 672.180.41.XT910.Retail.en.EU but I deleted some apps so I reflashed just to be sure ), and I flashed one .img file at a time from command line ( radio.img, cdrom_signed etc.. ). I didn't have any problem until last nigth. Thanks for help.
Cheers.
Stefano
Click to expand...
Click to collapse
Again, I've the same problem of yesterday.... Tips ?
You can flash the eu jb fastboot files and see if that fixes things. Don't attempt to downgrade to ics though.
Sent from my XT910 using Tapatalk 2
djpeesh said:
You can flash the eu jb fastboot files and see if that fixes things. Don't attempt to downgrade to ics though.
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Maybe I found one problem, I cannot enter in stock recovery....I can see the little green Android with triangle but when I press both volume buttons nothing happen. Ideas ? I've unistalled BMM, can I reflash the OTA update from BMM ?
Related
Hi guys,
I'm having a little problem here with my XS.
As you can read in the title, my XS is bricked and bootloop all the time, even when I plug in with wall charger.
I tried some tips like holding power+volume down when I plug in my phone, nothing ^^'
I was using XCreaM 3.2 (which work very well by the way ), my phone was rooted with Locked BL.
After uninstalling an application, I reboot my phone and got this awful bootloop :crying:
- I tried with SEUS, but got an error before installing updates (talking about verifying if my battery is charged)
- I tried to flash stock rom with flashtool (0.8.0.0 / 0.90.0. / 0.9.6.0 and even an older one), and with different firmware (GB, ICS...FR,UK,CH) but nothing.
I always got the same error (if i check "no final verification") :
27/000/2012 18:00:30 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0009";ERR_DYNAMIC="Final data verification failed";�
27/000/2012 18:00:30 - ERROR - Error flashing. Aborted
If I don't check it, flashtool do all the job but when I try to reboot my phone, I still have bootloop
Now I don't know what to do, except sending back my phone and praying for warranty work lol
Thanks in advance for your help.
slutman said:
Hi guys,
I'm having a little problem here with my XS.
As you can read in the title, my XS is bricked and bootloop all the time, even when I plug in with wall charger.
I tried some tips like holding power+volume down when I plug in my phone, nothing ^^'
I was using XCreaM 3.2 (which work very well by the way ), my phone was rooted with Locked BL.
After uninstalling an application, I reboot my phone and got this awful bootloop :crying:
- I tried with SEUS, but got an error before installing updates (talking about verifying if my battery is charged)
- I tried to flash stock rom with flashtool (0.8.0.0 / 0.90.0. / 0.9.6.0 and even an older one), and with different firmware (GB, ICS...FR,UK,CH) but nothing.
I always got the same error (if i check "no final verification") :
27/000/2012 18:00:30 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0009";ERR_DYNAMIC="Final data verification failed";�
27/000/2012 18:00:30 - ERROR - Error flashing. Aborted
If I don't check it, flashtool do all the job but when I try to reboot my phone, I still have bootloop
Now I don't know what to do, except sending back my phone and praying for warranty work lol
Thanks in advance for your help.
Click to expand...
Click to collapse
You could try to unlock your bootloader, this will factory reset your phone anyway.
Hi and thanks for your answer
realfelix said:
You could try to unlock your bootloader, this will factory reset your phone anyway.
Click to expand...
Click to collapse
Yeah, but if it doesn't work, I'll loose warranty, and could not send it back =/
Before unlocking it, I would like to know if it's gonna work at 100%
What application did you uninstall?
Sent from my LT26i using Tapatalk 2
Ben36 said:
What application did you uninstall?
Sent from my LT26i using Tapatalk 2
Click to expand...
Click to collapse
SwitchWidget Pro
Kinda useless since I've XCreaM 3.2 ^^
So not even a system app? Weird!
Sent from my LT26i using Tapatalk 2
Yeah i know =/
And it's weird that i can't flash any rom
Before I had a Xperia Ray and it was so easy to flash a rom when i bricked it.
I thought Flashtool would always work. Am i wrong?
Sent from my LT26i using xda app-developers app
I would love to but seems not working in my case :s
I've no idea how to pass over this sh**y error and working on it from 2 days now.
To desperate to continue searching, I'm sending back my phone this afternoon to get a new one ^^
(I bought it the 5th September and I already miss it lol)
Thanks all of you for helping
Please do not post Q&A in the general
Post Moved
slutman said:
Hi guys,
I'm having a little problem here with my XS.
As you can read in the title, my XS is bricked and bootloop all the time, even when I plug in with wall charger.
I tried some tips like holding power+volume down when I plug in my phone, nothing ^^'
I was using XCreaM 3.2 (which work very well by the way ), my phone was rooted with Locked BL.
After uninstalling an application, I reboot my phone and got this awful bootloop :crying:
- I tried with SEUS, but got an error before installing updates (talking about verifying if my battery is charged)
- I tried to flash stock rom with flashtool (0.8.0.0 / 0.90.0. / 0.9.6.0 and even an older one), and with different firmware (GB, ICS...FR,UK,CH) but nothing.
I always got the same error (if i check "no final verification") :
27/000/2012 18:00:30 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0009";ERR_DYNAMIC="Final data verification failed";�
27/000/2012 18:00:30 - ERROR - Error flashing. Aborted
If I don't check it, flashtool do all the job but when I try to reboot my phone, I still have bootloop
Now I don't know what to do, except sending back my phone and praying for warranty work lol
Thanks in advance for your help.
Click to expand...
Click to collapse
I think you have to cleare cache,data before flashing :/ happened to me loojs like the only way
Hit the thanks button if I helped!
I already tried it but any good news.
I sent back my phone and will receive a new one tuesday or wednesday
Thanks again to all of you for your help
Hey guys. I'll tell you what is happening with my phone.
I had SlimKat + JBX Kernel on the stock rom slot. Now I'm selling the phone, so i flashed the JB 4.1.2 retail Brazil (i'm from southamerica and that's the firmware we use) with RSD Lite. The whole process is OK, until the last step "reboot"... After that the phone is stuck in the second M logo, the one with waves around it.
The phone shows the Android logo that is like setting up the phone. Once that is done, it reboots, and here is the problem. The phone gets stuck in the M logo: not in the first one, but the second one (the M logo that has like some waves around it).
I don't know what to do since im 100% sure the firmware im using is the right one, the RSD Lite version is OK (6.1.5) and the whole process is OK until the phone reboots to load JB.
I think the JB IS installed, because that M with the waves around it is the animation OF the firmware. So the phone isn't sending me to the place where you config the phone for the first time (such as language, accounts, etc).
PLEASE i need your help guys. Thanks
MiloG4M3R said:
Hey guys. I'll tell you what is happening with my phone.
I had SlimKat + JBX Kernel on the stock rom slot. Now I'm selling the phone, and i flashed the JB 4.1.2 retail Brazil (i'm from southamerica and that's the firmware we use) with RSD Lite. The whole process is OK, until the last step "reboot"...
The phone shows the Android logo that is like setting up the phone. Once that is done, it reboots, and here is the problem. The phone gets stuck in the M logo: not in the first one, but the second one (the M logo that has like some waves around it).
I don't know what to do since im 100% sure the firmware im using is the right one, the RSD Lite version is OK (6.1.5) and the whole process is OK until the phone reboots to load JB.
I think the JB IS installed, because that M with the waves around it is the animation OF the firmware. So the phone isn't sending me to the place where you config the phone for the first time (such as language, accounts, etc).
PLEASE i need your help guys. Thanks
Click to expand...
Click to collapse
Shut down the phone,press vol+,vol - and power button at the same time,then scroll with vol- button to the "Recovery" option and select it with vol+ button.
After that you'll see android lying on his back with the red triangle,then press vol- and vol+ and choose the "Factory reset" option...
Sent from my Razr XT910
welder73 said:
Shut down the phone,press vol+,vol - and power button at the same time,then scroll with vol- button to the "Recovery" option and select it with vol+ button.
After that you'll see android lying on his back with the red triangle,then press vol- and vol+ and choose the "Factory reset" option...
Sent from my Razr XT910
Click to expand...
Click to collapse
It worked, thank you very much! I had luck because i was running out of battery also :victory:
Thanks again.
MiloG4M3R said:
It worked, thank you very much! I had luck because i was running out of battery also :victory:
Thanks again.
Click to expand...
Click to collapse
No problem
Sent from my Razr XT910
Im facing the same problem here, I flashed the Chinese retail firmware to my xt910 via rsd late and the whole process was a success with a pass at the end though I omitted the cdt.bin command in the XML file.Now the phone is stuck on the red M logo the one with waves around it and then restart for several seconds,tried the above solutions+ wipe caches nothing happens still stuck on M logo..help please .....!!!!!!???
enrylex said:
Im facing the same problem here, I flashed the Chinese retail firmware to my xt910 via rsd late and the whole process was a success with a pass at the end though I omitted the cdt.bin command in the XML file.Now the phone is stuck on the red M logo the one with waves around it and then restart for several seconds,tried the above solutions+ wipe caches nothing happens still stuck on M logo..help please .....!!!!!!???
Click to expand...
Click to collapse
Could try flashing with RSD Lite again
did you make sure md5 was correct?
Sent from my XT1060 using XDA Labs
I'm not really that good with these android things,so how do I check if the md5 is correct??,and have tried flashing one two more times now same thing,but here is the strange thing yesterday night after clearing cache and factory reset the phone turned on,I was able to change language from Chinese to English and enter in it but after like 50sec it restarted itself and again stucked on M logo so what's really do I have here guys?? Help please,I have been wandering so hardly and for a long time til now for this phone,am now very confused..
enrylex said:
I'm not really that good with these android things,so how do I check if the md5 is correct??,and have tried flashing one two more times now same thing,but here is the strange thing yesterday night after clearing cache and factory reset the phone turned on,I was able to change language from Chinese to English and enter in it but after like 50sec it restarted itself and again stucked on M logo so what's really do I have here guys?? Help please,I have been wandering so hardly and for a long time til now for this phone,am now very confused..
Click to expand...
Click to collapse
[Index] Hash Checksums: Verify that it was Downloaded Correctly
Sent from my KFFOWI using XDA Labs
MD5 checking
sd_shadow said:
[Index] Hash Checksums: Verify that it was Downloaded Correctly
Sent from my KFFOWI using XDA Labs
Click to expand...
Click to collapse
Have checked with MD5 and the file matches with the source, so guess the problem isn't the file, and that left me in comma until now as what might be the real issue on this phone.
my phone is xt910
manufactured in China and had Jelly Bean as its stock rom.
enrylex said:
Have checked with MD5 and the file matches with the source, so guess the problem isn't the file, and that left me in comma until now as what might be the real issue on this phone.
my phone is xt910
manufactured in China and had Jelly Bean as its stock rom.
Click to expand...
Click to collapse
which file?
Sent from my XT1060 using XDA Labs
The last 2-3 weeks i have really strange problem with my P780. When i try to charge it the level of the batter does not change (tried with 3 differet chargers) so propably you think that something wrong with the battery is going on. But whenever i reboot it or reseting it the level of the battery that appears after the reboot is different.
I changed the battery I ordered a new one but still the same problem occurs (at the beginning when i plugged it in it seemed that it was charging from 50% it reached 78% but then stopped and when i removed the charger it started going down really quick and when i rebooted i had 0% again)
Any ideas?? Thanks
chrichat said:
The last 2-3 weeks i have really strange problem with my P780. When i try to charge it the level of the batter does not change (tried with 3 differet chargers) so propably you think that something wrong with the battery is going on. But whenever i reboot it or reseting it the level of the battery that appears after the reboot is different.
I changed the battery I ordered a new one but still the same problem occurs (at the beginning when i plugged it in it seemed that it was charging from 50% it reached 78% but then stopped and when i removed the charger it started going down really quick and when i rebooted i had 0% again)
Any ideas?? Thanks
Click to expand...
Click to collapse
What firmware do you have? Tell us more! Details Details !
stympy said:
What firmware do you have? Tell us more! Details Details !
Click to expand...
Click to collapse
I have reset factory setting and the firmware now is S116.
And i have just flashed life 0.70 and still the same problem
chrichat said:
And i have just flashed life 0.70 and still the same problem
Click to expand...
Click to collapse
Flash Kitkat S226 then OTA update to S228 see if works, then flash Baralajbi VibeUI 2.0 and tell us what is going on!
If this 2 firmware dont work you might have a problem with your motherboard! Go to a service store!
Good Luck!
I flashed s226 and nothing worked. THen i tried to flash s228 and forgot to press DA_DL_ALL_WithCheckSum and i got stuk on screen with dll error, so i tried to reflash it an get an error from the flashtool S_FT_READBACK_FAIL(4009) and my phone can neither be flashed or hard reseted..... i am almost ready to throw it away... any ideas??
chrichat said:
I flashed s226 and nothing worked. THen i tried to flash s228 and forgot to press DA_DL_ALL_WithCheckSum and i got stuk on screen with dll error, so i tried to reflash it an get an error from the flashtool S_FT_READBACK_FAIL(4009) and my phone can neither be flashed or hard reseted..... i am almost ready to throw it away... any ideas??
Click to expand...
Click to collapse
Prepare your phone and press small red button for 20 seconds from the back of the phone near sd card slot. That one is the hard reset.
Sent from my Lenovo P780
stympy said:
Prepare your phone and press small red button for 20 seconds from the back of the phone near sd card slot. That one is the hard reset.
Sent from my Lenovo P780
Click to expand...
Click to collapse
I have done it and nothing changes still dll image Fail and still can not be flashed either with S226 or S228
chrichat said:
I have done it and nothing changes still dll image Fail and still can not be flashed either with S226 or S228
Click to expand...
Click to collapse
Try to reinstall the drivers ! I think your preloader is messed up !
Ηοw can i reinstal the drivers?
s_ft_readback_fail (4009)
I recieve this error when i am trying to flash again my device any help how can fix it?
chrichat said:
s_ft_readback_fail (4009)
I recieve this error when i am trying to flash again my device any help how can fix it?
Click to expand...
Click to collapse
If you want, we can do a team viewer sesion so i can see what is going on !
Well sure this can be very helpful, can we speak somehow through emails or private messages? My email is [email protected]
..
chrichat said:
..
Click to expand...
Click to collapse
SOLVED using SP Flash Tool v5!
So, I already had some issues with this device and they've been pretty similar, in a way that the problem always starts with random reboots when the power button is pressed. About two weeks ago I took it to a technician, because all sorts of connectivity (3G/Wi-fi/Bluetooth) simply stopped working, after yet another reboot. About 3 days ago I got it back and it was working fine except for the fact that the initial boot Motorola logo (The green one before the other logo animations) wasn't showing up. He told me it was fine because it was only an aesthetic problem because he couldn't find that image for my device's resolution.
This morning when i was going to work i picked up my XT1025 Moto E to check for messages and it suddenly restarted. So when I turn it back on, not only the animations did not pop up, but after some time all i get is a black screen, no UI whatsover, all I can do is turn off/restart the phone. At random times when I turn on the screen, it's content shows up but I can't click anything, and then an error message pops up saying that ''system has stopped responding''. I've tried many things to fix it, but nothing has worked so far.
What i've tried:
-Wiping cache partition did not work
-Factory resetting did not work either
-Unlocking bootloader (but apparently it was unlocked already)
-Flashing a custom recovery did not work for some reason...
These last two were on the ''All-In-One Guide'' by neo.ank and honestly I have no idea what i should do to fix this problem - I was thinking about reinstalling the stock ROM but i'd rather ask here first for you guys suggestions... (like i said, complete newb here).
Sorry for the long post and bad english, hopefully someone can help me out on this.
Kaio Oliveira said:
So, I already had some issues with this device and they've been pretty similar, in a way that the problem always starts with random reboots when the power button is pressed. About two weeks ago I took it to a technician, because all sorts of connectivity (3G/Wi-fi/Bluetooth) simply stopped working, after yet another reboot. About 3 days ago I got it back and it was working fine except for the fact that the initial boot Motorola logo (The green one before the other logo animations) wasn't showing up. He told me it was fine because it was only an aesthetic problem because he couldn't find that image for my device's resolution.
This morning when i was going to work i picked up my XT1025 Moto E to check for messages and it suddenly restarted. So when I turn it back on, not only the animations did not pop up, but after some time all i get is a black screen, no UI whatsover, all I can do is turn off/restart the phone. At random times when I turn on the screen, it's content shows up but I can't click anything, and then an error message pops up saying that ''system has stopped responding''. I've tried many things to fix it, but nothing has worked so far.
What i've tried:
-Wiping cache partition did not work
-Factory resetting did not work either
-Unlocking bootloader (but apparently it was unlocked already)
-Flashing a custom recovery did not work for some reason...
These last two were on the ''All-In-One Guide'' by neo.ank and honestly I have no idea what i should do to fix this problem - I was thinking about reinstalling the stock ROM but i'd rather ask here first for you guys suggestions... (like i said, complete newb here).
Sorry for the long post and bad english, hopefully someone can help me out on this.
Click to expand...
Click to collapse
You Should Flash Custom Roms.....
shyvam said:
You Should Flash Custom Roms.....
Click to expand...
Click to collapse
Hey man, thanks for the reply. How would this solve the problem, exactly? (I don't want o sound like a douche , i'd just like an explanation for information purposes - i'd be very thankful for some links ).
Are U on stock rom?
GNVM said:
Are U on stock rom?
Click to expand...
Click to collapse
I think it's currently using lollipop 5.1.
If u want to get back to stock 5.1 then flash stock rom. Then download the firmware from below link .
http://www.androidfilehost.com/?fid=24052804347783250
and download the batch file
https://www.androidfilehost.com/?fid=24269982087018369
1. Boot ur phone in fastboot mode then.
2. Extract the firmware and batch file on same folder and click on the batch file.
3. Click on the Fashtool batch file.
GNVM said:
If u want to get back to stock 5.1 then flash stock rom. Then download the firmware from below link .
http://www.androidfilehost.com/?fid=24052804347783250
and download the batch file
https://www.androidfilehost.com/?fid=24269982087018369
1. Boot ur phone in fastboot mode then.
2. Extract the firmware and batch file on same folder and click on the batch file.
3. Click on the Fashtool batch file.
Click to expand...
Click to collapse
Worked like a charm. Thanks a lot, man. ^_^
Dear friends
My phone was delivered with some SuperSU, and some days ago when it asked to be updated, I accepted that option and after the phone/SIM couldn't connect to the network so I could only make emergency calls.
After reading several articles on this site, I've tried to flash through Odin 3 several times, but every time when the phone reboots, it first erases something with Android logo and after that is stuck at Samsung logo picture and nothing happens. As mentioned, I have tried to do this activity several times but nothing helps. What can be done now to proceed?
Model is SM-G925F and I downloaded the firmware from Sammobile (SM-G925F/PAK/), and its following version which I have been trying with:
5.1.1: G925FXXU3COJ1_G925FOJP3COJ1_G925FXXU3COI9_HOME.tar-md5
Thanks.
Adeal81 said:
Dear friends
My phone was delivered with some SuperSU, and some days ago when it asked to be updated, I accepted that option and after the phone/SIM couldn't connect to the network so I could only make emergency calls.
After reading several articles on this site, I've tried to flash through Odin 3 several times, but every time when the phone reboots, it first erases something with Android logo and after that is stuck at Samsung logo picture and nothing happens. As mentioned, I have tried to do this activity several times but nothing helps. What can be done now to proceed?
Model is SM-G925F and I downloaded the firmware from Sammobile (SM-G925F/PAK/), and its following version which I have been trying with:
5.1.1: G925FXXU3COJ1_G925FOJP3COJ1_G925FXXU3COI9_HOME.tar-md5
Thanks.
Click to expand...
Click to collapse
What android version was the phone on before you flashed the firmware? 5.1.1 or 6.0.1?
How long did it stay on the samsung logo? Was the led lit up blue?
Power off phone.
Once off hold vol up + power + home together.
Keep holding them buttons and phone will boot into recovery.
Once in recovery wipe cache partition and wipe data/factory reset.
Try that first it should work.
Keep me updated
Thanks bro, tried this and it didn't help.
However, I discovered following error message:
dm-verity verification failed...
Need to check DRK first...
I think it was 5.1.1. before flashing. And the Samsung logo is there for hours...haven't tried days though.
callumbr1 said:
What android version was the phone on before you flashed the firmware? 5.1.1 or 6.0.1?
How long did it stay on the samsung logo? Was the led lit up blue?
Power off phone.
Once off hold vol up + power + home together.
Keep holding them buttons and phone will boot into recovery.
Once in recovery wipe cache partition and wipe data/factory reset.
Try that first it should work.
Keep me updated
Click to expand...
Click to collapse
Adeal81 said:
Thanks bro, tried this and it didn't help.
However, I discovered following error message:
dm-verity verification failed...
Need to check DRK first...
I think it was 5.1.1. before flashing. And the Samsung logo is there for hours...haven't tried days though.
Click to expand...
Click to collapse
Next thing to try if i was you would he to flash a 6.0.1 firmware. The UK BTU is a good one to flash it fixes a lot of errors.
Adeal81 said:
Dear friends
My phone was delivered with some SuperSU, and some days ago when it asked to be updated, I accepted that option and after the phone/SIM couldn't connect to the network so I could only make emergency calls.
After reading several articles on this site, I've tried to flash through Odin 3 several times, but every time when the phone reboots, it first erases something with Android logo and after that is stuck at Samsung logo picture and nothing happens. As mentioned, I have tried to do this activity several times but nothing helps. What can be done now to proceed?
Model is SM-G925F and I downloaded the firmware from Sammobile (SM-G925F/PAK/), and its following version which I have been trying with:
5.1.1: G925FXXU3COJ1_G925FOJP3COJ1_G925FXXU3COI9_HOME.tar-md5
Thanks.
Click to expand...
Click to collapse
Its a minor prolem u can flash twrp and with twrp u can clear data and flash custom kernel for eg arter kernel etc u should be out of bootloop u can use your sd card or an usb flash drive best of luck
callumbr1 said:
Next thing to try if i was you would he to flash a 6.0.1 firmware. The UK BTU is a good one to flash it fixes a lot of errors.
Click to expand...
Click to collapse
Tried, but didn't help unfortunatelt. Get following error message: Device does not have DRK, please install DRK first.
Krishhacker said:
Its a minor prolem u can flash twrp and with twrp u can clear data and flash custom kernel for eg arter kernel etc u should be out of bootloop u can use your sd card or an usb flash drive best of luck
Click to expand...
Click to collapse
Thanks for the suggestion, I tried but didn't help.
arter97-recovery-g925fi-22.0-twrp_3.0.2-0.tar.md5
Adeal81 said:
What can be done now to proceed?
Model is SM-G925F and I downloaded the firmware from Sammobile (SM-G925F/PAK/), and its following version which I have been trying with:
5.1.1: G925FXXU3COJ1_G925FOJP3COJ1_G925FXXU3COI9_HOME.tar-md5
Thanks.
Click to expand...
Click to collapse
Update it using Samsung Smart Switch.
Update to mm ROM
What actually worked in the end was "SpaceX-Kernel_MM_RC2.1_G925F.tar.md5". Thanks to all suggestions.
However, I am back to the original problem now. The phone cannot use any service provider, tried with both foreign and local Norwegian sim. It simply says that only emergency calls possible. This was the initial problem which I tried to solve by flashing ROM.
Any suggestions regarding how to deal with this?
Adeal81 said:
What actually worked in the end was "SpaceX-Kernel_MM_RC2.1_G925F.tar.md5". Thanks to all suggestions.
However, I am back to the original problem now. The phone cannot use any service provider, tried with both foreign and local Norwegian sim. It simply says that only emergency calls possible. This was the initial problem which I tried to solve by flashing ROM.
Any suggestions regarding how to deal with this?
Click to expand...
Click to collapse
Sounds like corrupted efs folder.... if so its very hard to revive and im yet to know of anybody who has fixed it. Good luck keep us updated