Hi everybody
I have been dealing with a strange problem. after unsuccessful installation official ROM (I9100XWLPT_I9100CPWLPA_CPW) by odin3, my phone shot down and I don't know what should I do:
1- LCD display nothing
2- I've tried, hard reset but nothing happend
3- computer doesn't recognize the phone
my phone is like that I remove the battery
( PS: I had installed this ROM successfully on this phone in the past)
( PS: the battery was charged over 80 percent)
would you please give me any advise
thanks
XWLPT is 4.0.4.It has EMMC brickbug.Search for it on XDA.
Related
Hi everyone , im sorry to tell but from begining i had problems with my s3 , i had a error and the battery was consumed very fast on standby then i rooted , installed other kernels roms etc , for nothing , i had an onscreen time of maximum 2.5 hours with everything shutted down gps sync geo localization setting all ...
Now i had installed original jelly bean flashed with odin and syah kernel the latest version from 1 month ago dont know exactly if something new came up.
My problem is that somehow when the phone was charging i was sending some emails and i felt a burned smell , i checked and the place in wich comes the plug into the phone was like toasted, from then i couldnt charge the phone no more and i cant put back the jelly bean using odin no more ...
The question is how do i put the original rom from tmobile germany back into my phone without odin , just with recovery mod ?
i coulndt find nothing on internet regarding this , just using odin , because when i try to start the phone i just pop the image with syah kernel and the guys from waranty will see this and my phone will be sended back as defect as i send it .
please help
Download stock rom on phone, enter cwm , flash, then use traingle away ! It should work!
After that do a reset from menu , and the phone should look clean!
*Urgent* Bricked S3(gt9300)? Accidentally wiped my s3 (in allianz rom bootloader screen) .* It then vomplrtely wouldn't work, so I used odin to put a stock rom on (via pda)* Success ! working completely fine until it lost power & will only ever get as far as the samsung logo when turned on. Need urgent diy help to get my phone working again,* I have tried a number of how-to's on fixung a bricked s3 via odin with no luck!* the error message is along the lines of no partion available & will fail no longer than 2 seconds into process. no matter what rom ; custom or stock Im unable to fix.* My guess would be that ive deleted whatever software in phone that would recognise a rom. Notes: I am competant in use of android just very good at making mistakes.* The only feature available is the download usb mode. Any help would be appreciated especially if it works, Im sure someone else has had the same problem!
Hi guys, I`m new to this forum and I wouldn`t be posting this topic if I found a solution on other forums. If anyone had a problem like mine, or saw a thread before, I would appreciate if you pasted a link to the solution, or gave some kind of advice.
First of all, I`m new to rooting, custom roms, etc., so I guess that whatever I did, it was my fault. I got this Galaxy S2 (GT-I9100) as a gift, and since i already had a phone, I wanted to take a risk and take a shot at installing a lollipop rom. I watched a few tutorials, it seemed simple enough, so i thought why the hell not, but in the process something went wrong...
Sooo... here is what I`ve done:
1.) Rooted my phone with VROOT
2.) Flashed custom recovery with ODIN. I`m not sure which version of CWM it was, 6.0.4.5 I think (the file is named CWM KitKar compatible-I9100). When I flashed CWM, my phone didn`t boot up. All I got was a Samsung Galaxy logo and a yellow triangle for a few seconds before my screen went black again, but I could still access both recovery mode and download mode using the combination of keys.
3.) And then I did what I think screwed up my phone. I thought maybe flashing a lollipop rom through recovery would solve the issue (maybe the recovery is incopatible with my older stock rom and it`s the reason why my phone isn`t booting). So i flashed CM12 from galaxys2root.com. It`s called CM12.1S ROM for Galaxy S2 GT-I9100 (Andorid 5.1)
Not only it didn`t solve my problem, I still can`t get my phone to boot (now I get a samsung logo and a yellow triangle, but screen doesn`t go black after a few seconds, I left it in this state till the battery ran out and still nothing). And on the top of all things, I can`t get my phone to recovery mode anymore, all I get is the yellow triangle. I can still get it into download mode, but it doesn`t connect with my PC anymore. It charges, but I can`t connect it with ODIN anymore. And the weirdest thing is, when I connect it to PC, my other USB port goes crazy and disconnect my USB Wi-Fi adapter
What went wrong? Any advice is highly anticipated. :good:
Hello to all. my problem is that I was trying to install the original firmware of samsung galaxy s2 , because he had the CyanogenMod , I was using Odin and at some point I disconnect the phone because it was said that at the end of the process lacked two minutes and I had 40 minutes I expected . after disconnecting the phone I try to turn it on and does not turn on . I tried everything , recovery mode , download mode , remove the battery for a few minutes , attach the phone to the PC with the cable , but no cell phone is off , there is no indication the inscription samsung, pls help me i'm desperate. sorry for my bad english
you probably bricked your device take it to the samsung care
Dear Friends,
My friend bring his SM-J100h/DS to me asking for repair.
it was stuck on boot so i tried to Wipe Data / Factory Reset, but there were many errors, something like "E: can't mount....."
After that, i flashed it with ODIN 3.09 + the latest firmware (September 29, 2016 based on my country code)
The flash was successful and PASS 100%..
but still stuck on boot logo.
so, i went to Youtube and found this link:
https://www.youtube.com/watch?v=1T9fxno2s68
i did everything exactly the same:
ROM => J100H_XXU0AOA1_OXE0AOA1.zip (contain files as shown below)
BL => BL_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low_ship.tar.md5
AP => AP_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low_ship.tar
CP => CP_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low_ship.tar
CSC => CSC_OXE_J100HOXE0AOA1_CL333157_QB3542504_REV01_user_low_ship.tar
PIT => J13G.pit (Repartition)
The flash once again PASS 100% and the device rebooted automatically but NO POWER.
It is completely DEAD now.
i removed the Battery, put it on again, still cannot be powered on.
i plugged in the USB charging cable, still no power, no charging indicator.
It's now completely dead.
What shall i do now? Somebody Please Help me.. :crying::crying::crying:
any help & advice would be much appreciated...
Somebody please help me T_T
Me too bro got the same problem! amd noone here seems can tell us whats happened and if they can help us
im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance
Same here, didn't detected but randomly detected from my computer but the phone still showing a black screen, Why???