[Q] (Need HELP) SM-J100h DEAD NO POWER After FLASH - Android Q&A, Help & Troubleshooting

Dear Friends,
My friend bring his SM-J100h/DS to me asking for repair.
it was stuck on boot so i tried to Wipe Data / Factory Reset, but there were many errors, something like "E: can't mount....."
After that, i flashed it with ODIN 3.09 + the latest firmware (September 29, 2016 based on my country code)
The flash was successful and PASS 100%..
but still stuck on boot logo.
so, i went to Youtube and found this link:
https://www.youtube.com/watch?v=1T9fxno2s68
i did everything exactly the same:
ROM => J100H_XXU0AOA1_OXE0AOA1.zip (contain files as shown below)
BL => BL_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low_ship.tar.md5
AP => AP_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low_ship.tar
CP => CP_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low_ship.tar
CSC => CSC_OXE_J100HOXE0AOA1_CL333157_QB3542504_REV01_user_low_ship.tar
PIT => J13G.pit (Repartition)
The flash once again PASS 100% and the device rebooted automatically but NO POWER.
It is completely DEAD now.
i removed the Battery, put it on again, still cannot be powered on.
i plugged in the USB charging cable, still no power, no charging indicator.
It's now completely dead.
What shall i do now? Somebody Please Help me.. :crying::crying::crying:
any help & advice would be much appreciated...

Somebody please help me T_T

Me too bro got the same problem! amd noone here seems can tell us whats happened and if they can help us

im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance

Same here, didn't detected but randomly detected from my computer but the phone still showing a black screen, Why???

Related

[Q] I9300 Bricked? is there a solution?

Hello all
I guess my I9300 is bricked, symptoms:
- cellphone get stucks on Samsung logo, and stay there
- I can only access to Downloading mode (vol down + home + power), forget about recovery console
- I have tried trough Odin (1.8.5 , 3.9.4 , 3.0.7) to upload diferents ROMs, even those which claims to solve the bricked issue (rom stock XELLA (UK))
- I always receive the same error "PIT Partition"
- Also I have tried, those roms which came in 5 parts, the ones which include PIT file, tried with re-partitions, and nothing
- I have tried the PIT Files for 16gb, 32gn, 64gb... an a few one else. and nothing works
I can't solve this situation, whatever I try I always face the same issue "Error PIT Partition" I have no idea how to solve that
This is what appears when I'm at downloading mode: (maybe it can help)
Odin Mode
Product name:
Custom Binary download: NO
Current Binary: Samsung Official
System Status: Custom
Well, if somebody faced the same situation and came trough alive! ahhahaha, pls share your knowledge
Happen all of a sudden? Could be sudden death syndrome(there is no fix, MB replacement).
to get past
Its dead. Half sds. Send for repair.
Please ask questions in the Q&A section
Sent from my GT-I9300 using Tapatalk 2

[Q] *Urgent* Galaxy S3 9300 , bricked (no fix found)

*Urgent* Bricked S3(gt9300)? Accidentally wiped my s3 (in allianz rom bootloader screen) .* It then vomplrtely wouldn't work, so I used odin to put a stock rom on (via pda)* Success ! working completely fine until it lost power & will only ever get as far as the samsung logo when turned on. Need urgent diy help to get my phone working again,* I have tried a number of how-to's on fixung a bricked s3 via odin with no luck!* the error message is along the lines of no partion available & will fail no longer than 2 seconds into process. no matter what rom ; custom or stock Im unable to fix.* My guess would be that ive deleted whatever software in phone that would recognise a rom. Notes: I am competant in use of android just very good at making mistakes.* The only feature available is the download usb mode. Any help would be appreciated especially if it works, Im sure someone else has had the same problem!

(Q) Need HELP - Bootloop & Cannot Enter Recovery

Hello all, I need help to solve my phone problem. I'm from Malaysia and this is a local brand phone called Ninetology Black Pearl 2.
I'll give you guys the link about the phone and it might can help me to solve the problem:
Phone Full Spec and the phone official Website.
Situation:
I was surfing the internet and the phone suddenly freeze. I thought i just a normal lag, but i waited too long and pulled out the battery. Reattached battery and try to switch it on, but there's only a logo appeared and it off and on over and over again. I've tried to go to recovery but failed! I totally need some expert advise how to revive my phone. Thank you in advance.
Video of the phone : Ninetology Black Pearl 2
This is what happened to the phone: Bootloop
I've tried:
1. Reflash stock ROM - Failed!
2. Enter Recovery mode - Failed!
Help needed, thank you.

[HELP][bricked] Please anyone Help i've bricked my lenovo a5000

Hello everyone , today i received a notification from lenovo that there is a new lenovo firmware update , i got so excited and i pressed ddownload buytton then it said that u can brick our device because this phone is rooted , so i unrooted the device completly and downloaded the firmware update wheni pressed the install button it restarted to the recover and showed an android toy laying down and the software upgrade percentage as a bar on the android phone screen, i thaught its normal and then it showed a little text under android logo that said "error" i thaught its just a normal failure and i will now just start the phone to normal mode and when i realised its been a lot of time phone is not turning on , found out im stuck at the bootloop, now i dont know how to ubrick it plz help, ill be thankful to you, plz repl and help now before it's battery dies and becomes dead phone. plz tell me a quick way to fix that ive tried to factory reset via recovery mode i am only able to visit the recovery screen my phone is unrooted, and i can also connect it to pc, plz tell me how to flash stock firmware
,EDITED : NOW I CANT turn on my device it is not turning on,now im unable to go to recover manu all i can do is when i connect it to my pc i hear a sound from my computer that something is connected and i cant turn on it's screen i tried all types of key combinations i cant turn it on plzzzzz help. Anyone?
not bricked
alihassan1397 said:
Hello everyone , today i received a notification from lenovo that there is a new lenovo firmware update , i got so excited and i pressed ddownload buytton then it said that u can brick our device because this phone is rooted , so i unrooted the device completly and downloaded the firmware update wheni pressed the install button it restarted to the recover and showed an android toy laying down and the software upgrade percentage as a bar on the android phone screen, i thaught its normal and then it showed a little text under android logo that said "error" i thaught its just a normal failure and i will now just start the phone to normal mode and when i realised its been a lot of time phone is not turning on , found out im stuck at the bootloop, now i dont know how to ubrick it plz help, ill be thankful to you, plz repl and help now before it's battery dies and becomes dead phone. plz tell me a quick way to fix that ive tried to factory reset via recovery mode i am only able to visit the recovery screen my phone is unrooted, and i can also connect it to pc, plz tell me how to flash stock firmware
,EDITED : NOW I CANT turn on my device it is not turning on,now im unable to go to recover manu all i can do is when i connect it to my pc i hear a sound from my computer that something is connected and i cant turn on it's screen i tried all types of key combinations i cant turn it on plzzzzz help. Anyone?
Click to expand...
Click to collapse
hey there ,sorry for the late reply ,but i just read the question .
if you can log into bootloop then your phone isn't really bricked .
can you get into the recovery ? if so ,you should just delete the cash and the delvic cash and reboot .you'll be able to get out of bootloop .
amr elfiky said:
hey there ,sorry for the late reply ,but i just read the question .
if you can log into bootloop then your phone isn't really bricked .
can you get into the recovery ? if so ,you should just delete the cash and the delvic cash and reboot .you'll be able to get out of bootloop .
Click to expand...
Click to collapse
hey buddy, mine is somewhat similar but i did hard reset and cleared cache partitions but when i try to switch it on, still says no command. any help please,.
you can reach me at [email protected]
thanks in advanced!
kasmotsadamori said:
hey buddy, mine is somewhat similar but i did hard reset and cleared cache partitions but when i try to switch it on, still says no command. any help please,.
you can reach me at [email protected]
thanks in advanced!
Click to expand...
Click to collapse
what do you mean it says no command. ? can you please elaborate ?
Same problem to me, need help
http://ainotech.com/how-to-flash-lenovo-a5000-receive-root-custom-recovery/
It worked for me now my phone is working better then it was before , I think it will work for you too,

S6 Edge Brick?! :'(

Hello Guys and Gals ^^
First of all, sorry for my english, i hope everyone can understand my problem
Yesterday my Samsung Galaxy S6 Edge shut down with an batteryload of 90%, after that it just entered a bootloop... :/
Since i've never had a CF or anything like that on my phone, i first thought of an hardware problem.
So i started reading here and some other forums, and tried as recommendet to flash the stock firmware via Odin3.
Now i can go beyond the Samsung - spondered by android or whatever it says - startscreen, the Blue LED starts and i enter the Samsung logo, which blinks for 3-4 times, just to reboot after that again... I also tried other versions of odin and other stock FW for my SM-G925F (Unbranded). Btw, also tried other USB ports, New Cables, Smart Switch... no Kies is running in the back while using odin.
Everytime i used Odin, it seems to work and my phone starts in the recovery mode with the little android guy, saying that its downloading sytem update... ERASING is the last thing he says after 20-30%, and the bootloop starts again. Also wiped cache and did Factory reset, but still no changes
I only used the 1 Part FW for odin. Hopefully that informations are enough for someone to help me out, but if there is a lack of informations, just ask for what you need to know further
I hope someone can help me, since i dont have the money for a new smartphone ^^

Categories

Resources