Hello all
I guess my I9300 is bricked, symptoms:
- cellphone get stucks on Samsung logo, and stay there
- I can only access to Downloading mode (vol down + home + power), forget about recovery console
- I have tried trough Odin (1.8.5 , 3.9.4 , 3.0.7) to upload diferents ROMs, even those which claims to solve the bricked issue (rom stock XELLA (UK))
- I always receive the same error "PIT Partition"
- Also I have tried, those roms which came in 5 parts, the ones which include PIT file, tried with re-partitions, and nothing
- I have tried the PIT Files for 16gb, 32gn, 64gb... an a few one else. and nothing works
I can't solve this situation, whatever I try I always face the same issue "Error PIT Partition" I have no idea how to solve that
This is what appears when I'm at downloading mode: (maybe it can help)
Odin Mode
Product name:
Custom Binary download: NO
Current Binary: Samsung Official
System Status: Custom
Well, if somebody faced the same situation and came trough alive! ahhahaha, pls share your knowledge
Happen all of a sudden? Could be sudden death syndrome(there is no fix, MB replacement).
to get past
Its dead. Half sds. Send for repair.
Please ask questions in the Q&A section
Sent from my GT-I9300 using Tapatalk 2
Related
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
skycasaway said:
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
Click to expand...
Click to collapse
Seems like a sudden death issue.take it to the service center.they'll replace the board.
Sent from my GT-I9300 using xda premium
Its either SDS or user bricked .
Service centre is your only option left .
jje
yes it's SDS
JJEgan said:
Its either SDS or user bricked .
Service centre is your only option left .
jje
Click to expand...
Click to collapse
Thank's mate, i think it's SDS! Do you know any fix to this problem!? please help me:crying::crying:
skycasaway said:
Thank's mate, i think it's SDS! Do you know any fix to this problem!? please help me:crying::crying:
Click to expand...
Click to collapse
as said before: service centre
skycasaway said:
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
Click to expand...
Click to collapse
The thing is you flashed a version not meant for your GT I9300. You flashed the Verizon bootchain. Verizon GSIII is Samsung SCH-i535.
Different hardware than a i9300 (Qualcomm Snapdragon MSM8260A Dual core CPU, and the i9300 has a Samsung Exynos 4412 Quadcore). Sorry bro. If you still have download mode, you can try flash a i9300 bootloader. If not. you're dead.
Hi xda , i have this china-bought Galaxy S3 GT-I9300.
It started out with gps not working and i tried to flash a stock rom using odin (device was rooted) and it failed after countless flashings.
And then whenever I tried to boot the device again it was stuck at the ''Samsung GALAXY SIII GT-I9300'' screen. not sure if it was a bootloop but it was just hanged there. I have cwm recovery mode but i can't access download mode however i tried. And all of my computers cant seem to detect the device. so basically the thing i am able to access now is the cwm recovery mode. i tried various roms but to no avail.(they all hanged while installing system files)
Some specs about this device i know:
- Board : uniscope77_bu3_cu_ics2
- CPU : armeabi-v7a
some additional info : i once formatted everything on the device using cwm (internal storage , system , everything)
-I tried reset to factory settings countless times too but they were all stuck at the ''Samsung GALAXY SIII GT-I9300'' screen.
-Its original stock firmware was from china and yes , ive tried using china stock rom and all i get was blahblahblah and a ''(bad)'' thing.
if you need anything else like what other things i did to the device pls tell me. pls help me solve this problem thanks you ^_^
site
zBurnXz said:
Hi xda , i have this china-bought Galaxy S3 GT-I9300.
It started out with gps not working and i tried to flash a stock rom using odin (device was rooted) and it failed after countless flashings.
And then whenever I tried to boot the device again it was stuck at the ''Samsung GALAXY SIII GT-I9300'' screen. not sure if it was a bootloop but it was just hanged there. I have cwm recovery mode but i can't access download mode however i tried. And all of my computers cant seem to detect the device. so basically the thing i am able to access now is the cwm recovery mode. i tried various roms but to no avail.(they all hanged while installing system files)
Some specs about this device i know:
- Board : uniscope77_bu3_cu_ics2
- CPU : armeabi-v7a
some additional info : i once formatted everything on the device using cwm (internal storage , system , everything)
-I tried reset to factory settings countless times too but they were all stuck at the ''Samsung GALAXY SIII GT-I9300'' screen.
-Its original stock firmware was from china and yes , ive tried using china stock rom and all i get was blahblahblah and a ''(bad)'' thing.
if you need anything else like what other things i did to the device pls tell me. pls help me solve this problem thanks you ^_^
Click to expand...
Click to collapse
Where did you bought it?
China
your screwed the only thing you can do is download Chn_Chn Firmware from Samsungs website and flash it though odin. And that's the only fimrware that will work, unless you flash a custom bootloader through your sd card as then it will overwrite the encrypted boot.img allowing you flash any European Firmware.
*Urgent* Bricked S3(gt9300)? Accidentally wiped my s3 (in allianz rom bootloader screen) .* It then vomplrtely wouldn't work, so I used odin to put a stock rom on (via pda)* Success ! working completely fine until it lost power & will only ever get as far as the samsung logo when turned on. Need urgent diy help to get my phone working again,* I have tried a number of how-to's on fixung a bricked s3 via odin with no luck!* the error message is along the lines of no partion available & will fail no longer than 2 seconds into process. no matter what rom ; custom or stock Im unable to fix.* My guess would be that ive deleted whatever software in phone that would recognise a rom. Notes: I am competant in use of android just very good at making mistakes.* The only feature available is the download usb mode. Any help would be appreciated especially if it works, Im sure someone else has had the same problem!
Hi
I just got an Samsung Galaxy S3 I9300 GSMH from a friend.
The phone is not stolen,barred or tampered with. It was bought from the samsung store in Hing Kong and is around 1 year old.
Its totally stock, no custom ROM and custom binary in download mode says No.
The phone is stuck on the Samsung logo screen and keeps flashing. I can get into both recovery and download mode.
I tried reboot system, wipe cache and factory reset and its still stuck at the logo screen flashing.
When I connect to Kies in download mode it says device not responding and doesnt play ball. Tried all the trouble shoot but still does nothing...
The phone is recognised by Odin 3.07.
I have not tried anything further as I want some good advice so as not to brick the phone by using the wrong firmware!!
Could anyone advise me what to do next? I am guessing I need to flash firmware in Odin.
Do I need to partition with the pit file as well?
Again I would highly appreciate some help and links to the correct firmware for the phone.
Thanks in advance
Mark
This is all p[posted in the faqs and guides ..
First in download mode check product code id nothing there you need a service centre .
Flash stock rom via Odin do not touch PIT .
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
do a factory reset.
Sent from my GT-I9300 using XDA Premium 4 mobile app
Dear Friends,
My friend bring his SM-J100h/DS to me asking for repair.
it was stuck on boot so i tried to Wipe Data / Factory Reset, but there were many errors, something like "E: can't mount....."
After that, i flashed it with ODIN 3.09 + the latest firmware (September 29, 2016 based on my country code)
The flash was successful and PASS 100%..
but still stuck on boot logo.
so, i went to Youtube and found this link:
https://www.youtube.com/watch?v=1T9fxno2s68
i did everything exactly the same:
ROM => J100H_XXU0AOA1_OXE0AOA1.zip (contain files as shown below)
BL => BL_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low_ship.tar.md5
AP => AP_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low_ship.tar
CP => CP_J100HXXU0AOA1_CL333157_QB3542504_REV01_user_low_ship.tar
CSC => CSC_OXE_J100HOXE0AOA1_CL333157_QB3542504_REV01_user_low_ship.tar
PIT => J13G.pit (Repartition)
The flash once again PASS 100% and the device rebooted automatically but NO POWER.
It is completely DEAD now.
i removed the Battery, put it on again, still cannot be powered on.
i plugged in the USB charging cable, still no power, no charging indicator.
It's now completely dead.
What shall i do now? Somebody Please Help me.. :crying::crying::crying:
any help & advice would be much appreciated...
Somebody please help me T_T
Me too bro got the same problem! amd noone here seems can tell us whats happened and if they can help us
im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance
Same here, didn't detected but randomly detected from my computer but the phone still showing a black screen, Why???