Related
Hey plz tell me in detail how do i install custom rom (most stable with excellent performance) in my lg p500!!!
plz answer in detail including how do i wipe sd card and all
THnx in advandee
Have you rooted your phone?
Well I'll assume that you have an P500 with v2.2.2, Stock Rom Untouched.
Firstly you would want to root the phone. http://forum.xda-developers.com/showthread.php?t=1044765
Download Gingerbreak
- Make sure USB debugging is enabled(Can be enabled through settings)
- Make sure you have an SD card (formatted and) inserted
- Place the app onto the root of your SD card
- Open the APK, press the root button
- Wait a few minutes. If there are no problems, the device will reboot (note that the reboot itself can take like 10 minutes due to cache wipe)
Congratulations the phone is rooted.
danialrocker said:
Have you rooted your phone?
Well I'll assume that you have an P500 with v2.2.2, Stock Rom Untouched.
Firstly you would want to root the phone. http://forum.xda-developers.com/showthread.php?t=1044765
Download Gingerbreak
- Make sure USB debugging is enabled(Can be enabled through settings)
- Make sure you have an SD card (formatted and) inserted
- Place the app onto the root of your SD card
- Open the APK, press the root button
- Wait a few minutes. If there are no problems, the device will reboot (note that the reboot itself can take like 10 minutes due to cache wipe)
Congratulations the phone is rooted.
Click to expand...
Click to collapse
ya i have rooted!!!
i have 2.2.1 and recovery of
Build : RA-thunderg-1.2.0-GNM
how do i install cm7 and wipe and other things
thnx in advance
danialrocker said:
Have you rooted your phone?
Well I'll assume that you have an P500 with v2.2.2, Stock Rom Untouched.
Firstly you would want to root the phone. http://forum.xda-developers.com/showthread.php?t=1044765
Download Gingerbreak
- Make sure USB debugging is enabled(Can be enabled through settings)
- Make sure you have an SD card (formatted and) inserted
- Place the app onto the root of your SD card
- Open the APK, press the root button
- Wait a few minutes. If there are no problems, the device will reboot (note that the reboot itself can take like 10 minutes due to cache wipe)
Congratulations the phone is rooted.
Click to expand...
Click to collapse
ya i have rooted!!!
i have 2.2.1 and recovery of
Build : RA-thunderg-1.2.0-GNM
how do i install cm7 and wipe and other things
thnx in advance
After rooting your phone, you must have 1) Recovery Installer
2) Terminal Emulator (Free from market)
3) The Custom Rom
I recommend FranciscoFranco's Rom as it contains excellent tweaks without hassle of flashing many files which may cause your phone to brick.
Recovery Installer, You can get it from: http://dl.dropbox.com/u/11987571/quick/recovery_installer.rar
when you have everything, lets start
1. extract contents of "recovey_installer.rar" to the root(meaning the base) of your SDcard.(it contains 3 files, so you should also see 3 new files on your SD card).
2. open terminal emulator, enter these lines(press enter after each line):
Code:
su
sh /sdcard/rf.sh
just wait and this should reboot you directly to recovery.
3. now in recovery(remember: "vol + and - button" is "up and down" "menu button is ok/select" and "back button" is back)
Congratulations, Your Recovery Installer is installed.
Now, You can get FranciscoFranco's Rom which is called Devoid from
here: http://forum.xda-developers.com/showthread.php?t=1049518
Download franco.devoid and the kernel.
Go to recovery boot
1.Select Wipe and Wipe everything and that includes data+factory settings, cache, system, .android-secure and sd-ext partition (if you had it already)
2. Select ext partition and choose either ext2/3/4 : 512mb,swap:0
3.Toggle usb connection and place devoid.franco and the kernel zip files onto your sd card.
4.Select flash and flash devoid.franco first then flash the kernel.You do not need to toggle signature verify as it should have signatured. If you are a ***** then carry on and toggle signature verify.
5.Reboot.
Enjoy
You can thank me by pressing the thank button
virusshah1997 said:
ya i have rooted!!!
i have 2.2.1 and recovery of
Build : RA-thunderg-1.2.0-GNM
how do i install cm7 and wipe and other things
thnx in advance
Click to expand...
Click to collapse
There's an option where it says "wipe" when you are in your recovery boot you should enter that category and wipe what the developer says.
Also there should be a guide of how to flash cm7 onto your phone in the thread itself
There shouldn't be any problem .
Do you mean you do not know how to enter recovery boot menu?
If so, open your terminal emulator and type
su
reboot recovery
It will reboot your phone to recovery boot.
Then wipe what the developer asks you to wipe,
make the partition on your sd card wether its ext2/3/4
Then flash it.
danialrocker said:
After rooting your phone, you must have 1) Recovery Installer
2) Terminal Emulator (Free from market)
3) The Custom Rom
I recommend FranciscoFranco's Rom as it contains excellent tweaks without hassle of flashing many files which may cause your phone to brick.
Recovery Installer, You can get it from: http://dl.dropbox.com/u/11987571/quick/recovery_installer.rar
when you have everything, lets start
........
Click to expand...
Click to collapse
Sorry i had cut down your post a little bit, as i was quoting it
Thanks from my side
As you made it very easy for us to understand on how to flash with custom roms
danialrocker said:
After rooting your phone, you must have 1) Recovery Installer
2) Terminal Emulator (Free from market)
3) The Custom Rom
I recommend FranciscoFranco's Rom as it contains excellent tweaks without hassle of flashing many files which may cause your phone to brick.
Recovery Installer, You can get it from: http://dl.dropbox.com/u/11987571/quick/recovery_installer.rar
when you have everything, lets start
1. extract contents of "recovey_installer.rar" to the root(meaning the base) of your SDcard.(it contains 3 files, so you should also see 3 new files on your SD card).
2. open terminal emulator, enter these lines(press enter after each line):
Code:
su
sh /sdcard/rf.sh
just wait and this should reboot you directly to recovery.
3. now in recovery(remember: "vol + and - button" is "up and down" "menu button is ok/select" and "back button" is back)
Congratulations, Your Recovery Installer is installed.
Now, You can get FranciscoFranco's Rom which is called Devoid from
here: http://forum.xda-developers.com/showthread.php?t=1049518
Download franco.devoid and the kernel.
Go to recovery boot
1.Select Wipe and Wipe everything and that includes data+factory settings, cache, system, .android-secure and sd-ext partition (if you had it already)
2. Select ext partition and choose either ext2/3/4 : 512mb,swap:0
3.Toggle usb connection and place devoid.franco and the kernel zip files onto your sd card.
4.Select flash and flash devoid.franco first then flash the kernel.You do not need to toggle signature verify as it should have signatured. If you are a ***** then carry on and toggle signature verify.
5.Reboot.
Enjoy
You can thank me by pressing the thank button
Click to expand...
Click to collapse
When ever i type
su
sh /sdcard/rf.sh
It say not found
iamrajeev said:
When ever i type
su
sh /sdcard/rf.sh
It say not found
Click to expand...
Click to collapse
HeY!
Have u copied files on root of ur sd card?
(on sdcard not in any folder)
Extaract it and den copy it
it in root..i coped there & than extracted
iamrajeev said:
it in root..i coped there & than extracted
Click to expand...
Click to collapse
add me in fb.... i will teach u
id de add kar leta
virusshah1997 said:
add me in fb.... i will teach u
Click to expand...
Click to collapse
good virusshah good to see u helping enjoy
Hi everyone.
I'm really sick of this phone (X10 mini pro). right now no matter what i try and flash to it using xrecovery and update.zip, i reboot and always find that i'm running the same old system - like as if i've done NOTHING TO IT AT ALL!
I tried flashing this (which is what i really wanted):
http://forum.xda-developers.com/showthread.php?t=1041099
Nothing, reboots into stock.
I then tried this:
http://forum.xda-developers.com/showthread.php?t=1059361
Also no luck.
What am i doing wrong!? I download the rom, extract (System, META-INF and/or any other folder) and then i install any hotfixes by dragging and dropping/replacing files.
I then zip up the system and meta folders (plus anything else ie: Data folder) to update.zip, then install via xrecovery -- which does so fine, no warning messages -- then i CLEAR cache or format data (if instructed) and reboot.
As far as i can tell, i'm doing NOTHING wrong and it's extremely frustrating. Everytime i reboot i'm greeted with the same old setup wizard, same old theme, same stock "About Phone" details, as listed below:
Model Number:
U20i
Firmware Version:
2.1-update1
Baseband Version:
M76XX-TSNCJOLYM-53404015
Kernal Version:
2.6.29
[email protected] #1
Build Number:
2.1.1.A.0.6
What is going on???
Have you tried not renaming the zip file and flash it as it is, then flash the hotfixes next?
Maybe what you added or replaced caused the flashing to not work at all. For me when I flash a big rom it'll take about a minute. If it was flashed and you don't even see it copying files then it must have failed.
Sent from my U20i using XDA App
Choose custom zip, navigate to the zip file location in your sd card and confirm flashing it. Must work. I bet you flashed the "update.zip" which doesn't exist.
Sent from my U20i using XDA App
Thanks for the quick reply guys.
Unfortunately i've tried both these methods and i still get the same problem. (I just tried both methods again to be sure) Xrecovery just states "Copying files..." then within about a minute or so, it tells me it's "Completed"
Just for the record, i did buy this phone used (and "unlocked" to any network) would that somehow have something to do with this?
I've also tried a factory reset using the PC companion from Sony (then installing a rom) even after that i still get this problem.
Frustrating, very frustrating.
Ok, so i did this all over again:
Step 1.
Reset phone using PC Companion
Step 2
Setup Wifi using the wizard
Step 3
enable usb debugging and Unknown Sources (both under Applications)
Step 4
Connect phone via usb, transfer over Xrecovery, update.zip, etc. Then UNMOUNT SDCARD.
Root phone using S1C, install busybox during then reboot.
Step 5:
Setup marketplace account & Download (provided i get past that rediculous "downloading.." hang bug):
Busybox Installer, once downloaded, double click icon and install
Download and install Root Explorer
Step 6:
install Xrecovery manually using Root Explorer, placing it's 3 files in \system\bin
step 7:
Connect usb, transfer over update.zip, reboot and enter xrecovery
Now, guess what? XRECOVERY won't even start when i hit the back button when the SE logo appears!
One problem after another, about to give up. Really not impressed.
Do the following at your own risk
> Before you start make sure you have
- Root access
- Busy box and terminal emulator (you can get this from the market) installed
1. Download this script http://www.mediafire.com/?yw2a3r2didpb51t
2. Extract the folder called AAIS and rename it to "aais" (without the quotations)
3. Copy the aais folder to sdcard
4. Open up terminal emulator and type in the following commands
Code:
su
Click on allow when superuser dialog pops up and then type
Code:
cd sdcard/aais
Code:
sh install.sh
A list will appear, type the number which installs xrecovery and press enter
Once the phone has rebooted
1. Copy the zip of the rom which you want to install straight to the sd card (Do not rename it, extract it or do anything to it)
2. Copy the zip of the hotfixes straight to the sd card (again do not rename, extract or do anything)
3. Reboot phone, when it reaches "Sony Ericsson" press back a few times to boot into xrecovery
4. Using xrecovery do this
- Wipe cache partition
- Advanced option > wipe dalvik cache and wipe battery stats
- Go back to xrecovery main menu and then click on factory reset (full wipe)
4. Then goto install custom zip > choose custom zip from sdcard > and then choose the rom zip. Let it install
5. Once rom is installed click on choose custom zip from sdcard > and then choose the hotfix zip.
6. Once installed go back to xrecovery main menu and reboot phone
Hopefully should work
K><A said:
Do the following at your own risk
*snip*
Click to expand...
Click to collapse
Thanks for this post, exactly what i needed. Tis much appreciated.
I did what you said, word for word, and everything went smoothly. Xrecovery booted up fine and installed everything fine.
Unfortunately, this has failed to resolve the problem. I'm totally clueless as i'm sure most of you are. All i can say is it's not user error - i've not done anything wrong or missed a THING. I've really followed as you instructed word for word (as i did with previous attempts) and i still got nowhere. I've now spent all day trying to resolve this and still with no luck.
The only difference all of this ever seems to make is i'm constantly bothered by popups saying "X application has failed" etc etc now. It still just boots into the regular OS like as if nothing has happend.
Download this file, do not extract it, copy it straight to your sd card:
https://rapidshare.com/#!download|7...zip|121614|R~E38D143E052C271F51D9FBCAF24427E1
Download this file, do not extract it, copy it straight to your sd card
https://rapidshare.com/#!download|3...ight.zip|1|R~11A42E8D7D5D2FAE74791CC0D9911BE7
Go into xrecovery then
Wipe cache partition
Wipe dalvick cache
Wipe battery stats
Factory reset (full wipe)
Goto install custom zip from sd card and flash the first file
then flash the second file. Reboot phone. Hope it works.
1- Download Sony Ericsson Update Service from here -> http://www.sonyericsson.com/cws/sup...ed/updateservice/xperiax10minipro?cc=gb&lc=en
2- Install it !
3- Run it !
5- Click on "I agree all..." and then next.
4- On the home page of the software, select "X10 mini pro" and click on next !
5- Turn off your phone and remove your battery.
6- Wait 30 seconds x)
7- Plug your usb cable in your computer but not yet in your phone !
8- Replace your battery !
9- Press and hold "Back" button (the 3rd physic button) !
10- Plug your usb cable into your phone !
11- Let's SEUS doing his work !
12- When it says "Finiiiiish !!!", unplug your usb cable and boot your phone !
13- Go to Settings -> About the phone and check if your Firmware is : 2.1.1.A.0.6 !
14- Root your phone.
15- Install xRecovery with K><A method !
16- After, download the ROM you want, place it at the root of your SD card.
17- Reboot into xRecovery and choose "install a custom.zip"
18- Select the .zip of your ROM and apply
That would fix your problem if you follw my instructions
This worked
Why is that? is the version you linked an older one?
Thingamajig said:
This worked
Why is that? is the version you linked an older one?
Click to expand...
Click to collapse
I am pretty sure you didnt have right baseband and xrecovery.
Please sticky this thread mods. Its one of the best tutorials i have seen so far.
Thanks guys for helping him
Sent from my U20i using XDA Premium App
No worries
I linked the latest version.
Hi all,
I hope this thread won't be marked as spam, but i can't find solutions to my problem.
A few days ago I installed Jelly Bean Firmware (4.1.2 I9100XXLSJ) on my Galasy S2. I folowed some tutorial and based on this tutorial everything should look fine, but isn't.
Now my GS2 freeze and restart very (very) often, maibe it is hard to cound how many times per day. It can restart itslef till few minut in use and many times.
I can locate some special situations, when the gs2 freeze is for example when I write sms, write something in gtalk, or only just aj move by homescreens.
Sometime it restart on few second look like touchewiz is retarted, but sometime i must putt the battery off and put it back.
Can anybody help me?
Any ideas can be helpful.
Thanks a lot....
[email protected] said:
Hi all,
I hope this thread won't be marked as spam, but i can't find solutions to my problem.
A few days ago I installed Jelly Bean Firmware (4.1.2 I9100XXLSJ) on my Galasy S2. I folowed some tutorial and based on this tutorial everything should look fine, but isn't.
Now my GS2 freeze and restart very (very) often, maibe it is hard to cound how many times per day. It can restart itslef till few minut in use and many times.
I can locate some special situations, when the gs2 freeze is for example when I write sms, write something in gtalk, or only just aj move by homescreens.
Sometime it restart on few second look like touchewiz is retarted, but sometime i must putt the battery off and put it back.
Can anybody help me?
Any ideas can be helpful.
Thanks a lot....
Click to expand...
Click to collapse
try re-flashing the rom once again and see
I'll try it
Sun90 said:
try re-flashing the rom once again and see
Click to expand...
Click to collapse
Of course try it.... I try to format sd cart... but.. without any different
[email protected] said:
Hi all,
I hope this thread won't be marked as spam, but i can't find solutions to my problem.
A few days ago I installed Jelly Bean Firmware (4.1.2 I9100XXLSJ) on my Galasy S2. I folowed some tutorial and based on this tutorial everything should look fine, but isn't.
Now my GS2 freeze and restart very (very) often, maibe it is hard to cound how many times per day. It can restart itslef till few minut in use and many times.
I can locate some special situations, when the gs2 freeze is for example when I write sms, write something in gtalk, or only just aj move by homescreens.
Sometime it restart on few second look like touchewiz is retarted, but sometime i must putt the battery off and put it back.
Can anybody help me?
Any ideas can be helpful.
Thanks a lot....
Click to expand...
Click to collapse
Typical result of flashing new Rom without full wipe
So just reflash Rom but this time with full wipe (backup data/apps fist, if not already happened)
Much success,
CHEERS
---------- Post added at 03:23 PM ---------- Previous post was at 03:22 PM ----------
[email protected] said:
Of course try it.... I try to format sd cart... but.. without any different
Click to expand...
Click to collapse
What u mean with "format sd card"
How was ur flash way?
Did u flash another kernel?
Hannibal226 said:
Typical result of flashing new Rom without full wipe
So just reflash Rom but this time with full wipe (backup data/apps fist, if not already happened)
after I flash my gs2 I use the full wipe ( power button + home + volume up) and navigate to wipe ....
Much success,
CHEERS
---------- Post added at 03:23 PM ---------- Previous post was at 03:22 PM ----------
What u mean with "format sd card"
How was ur flash way?
Did u flash another kernel?
Click to expand...
Click to collapse
What u mean with "format sd card" -> trought gparted I format usb space in gs2, normaly as another partition..
How was ur flash way? I can past here a link (cause iam a noowbie)
[email protected] said:
What u mean with "format sd card" -> trought gparted I format usb space in gs2, normaly as another partition..
How was ur flash way? I can past here a link (cause iam a noowbie)
Click to expand...
Click to collapse
OK
I post u my guide...
only thing I've to know is:
Do u have the CWM (recovery mode [where u can flash from phone])?
Or u now have to flash from PC (phone in download mode)?
CHEERS
PS: U have already saved ur data?
Hannibal226 said:
OK
I post u my guide...
only thing I've to know is:
Do u have the CWM (recovery mode [where u can flash from phone])?
Or u now have to flash from PC (phone in download mode)?
CHEERS
Click to expand...
Click to collapse
I flas my gs2 from PC - in download mode....
[email protected] said:
I flas my gs2 from PC - in download mode....
Click to expand...
Click to collapse
OK, All right.
So don't worry all is fine
=> Root
1) Download Odin (http://androidfirmwares.net/Tools)
2) Download root kernel (http://forum.xda-developers.com/showthread.php?t=1103399)
-- just scroll down and search for ur version (settings>about phone>basis version)
3) Flash it via Odin
-- Extract .zip
-- load the root kernel in Odin (as PDA)
-- Put SGSII in download mode (Vol-, Home and Powerbutton)
-- Press "Start"
4) Phone will reboot by itself.
=> Now start the process for flash Rom.
1) Download Rom
2) Put it on internal sd card
3) Go into recovery mode (see above)
4) DO A FULL WIPE!! (U won't loose ur backup on sd card [but u can copy it to PC, too, if u want])
-- wipe data/ factory reset
-- wipe cahe partition
-- advanced > wipe dalvik cache
-- mount and storage > format data/system/cache
5) Then flash Rom via recovery
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Reboot and u r done!
So be cool an do all, step for step.
Hope u know ur basis version of android
MUCH SUCCESS
Hannibal226 said:
OK, All right.
So don't worry all is fine
=> Root
1) Download Odin (http://androidfirmwares.net/Tools)
2) Download root kernel (http://forum.xda-developers.com/showthread.php?t=1103399)
-- just scroll down and search for ur version (settings>about phone>basis version)
3) Flash it via Odin
-- Extract .zip
-- load the root kernel in Odin (as PDA)
-- Put SGSII in download mode (Vol-, Home and Powerbutton)
-- Press "Start"
4) Phone will reboot by itself.
=> Now start the process for flash Rom.
1) Download Rom
2) Put it on internal sd card
3) Go into recovery mode (see above)
4) DO A FULL WIPE!! (U won't loose ur backup on sd card [but u can copy it to PC, too, if u want])
-- wipe data/ factory reset
-- wipe cahe partition
-- advanced > wipe dalvik cache
-- mount and storage > format data/system/cache
5) Then flash Rom via recovery
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Reboot and u r done!
So be cool an do all, step for step.
Hope u know ur basis version of android
MUCH SUCCESS
Click to expand...
Click to collapse
This tutorial look very good, but(sry iam a newbie) but i dont know which kernel should i download...can u help me find thi which one?
My info from phone..
Model number - GT-I9100
Andoroid version - 4.1.2
Baseband version - I9100XXLS6
kernel version - 3.0.31-462349 [email protected] #3 SMP PREEMPT Tue Nov 6 02:42:23 KST 2012
Build number JZ054K.I9100CCLSJ
Hannibal226 said:
Typical result of flashing new Rom without full wipe
So just reflash Rom but this time with full wipe (backup data/apps fist, if not already happened)
Much success,
CHEERS
---------- Post added at 03:23 PM ---------- Previous post was at 03:22 PM ----------
What u mean with "format sd card"
How was ur flash way?
Did u flash another kernel?
Click to expand...
Click to collapse
Flashing with full wipe is OK! Thanks!
[email protected] said:
This tutorial look very good, but(sry iam a newbie) but i dont know which kernel should i download...can u help me find thi which one?
My info from phone..
Model number - GT-I9100
Andoroid version - 4.1.2
Baseband version - I9100XXLS6
kernel version - 3.0.31-462349 [email protected] #3 SMP PREEMPT Tue Nov 6 02:42:23 KST 2012
Build number JZ054K.I9100CCLSJ
Click to expand...
Click to collapse
4.1.2
So u already flashed once and I think u have already the CWM.
Do the following:
Turn the phone off
Hold Vol+, Home and Powerbutton
Tell me if u are in an recoverymode (U should the "install .zip from sd card", "backup and restore" and some points more)
If u see this u only have to do the second part of my guide.
CHEERS
Ash-Shaybanee said:
Flashing with full wipe is OK! Thanks!
Click to expand...
Click to collapse
Hi all,
i try to full wipe and flash my android, but it won't work. My android still freeze and reboot itself very very often.
I can't use the tutorial whit send me Hannibal226, cause I can find a appropriate kernel.
Can anybody help?
Any help and ideas will be great.
Thanks a lot....
Hannibal226 said:
4.1.2
So u already flashed once and I think u have already the CWM.
Do the following:
Turn the phone off
Hold Vol+, Home and Powerbutton
Tell me if u are in an recoverymode (U should the "install .zip from sd card", "backup and restore" and some points more)
If u see this u only have to do the second part of my guide.
CHEERS
Click to expand...
Click to collapse
Sorry but, I dont follow your tuttorial cause, i dont know wich kernel i should use... This my info are which i have current (classical flash through odin and wipe)
When I go to recovery mode using Hold Vol+, Home and Powerbutton, I see only this options:
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
[email protected] said:
Sorry but, I dont follow your tuttorial cause, i dont know wich kernel i should use... This my info are which i have current (classical flash through odin and wipe)
When I go to recovery mode using Hold Vol+, Home and Powerbutton, I see only this options:
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
Click to expand...
Click to collapse
Ok this won' listen like the "right" CWM.
So now do this:
=>Flash root kernel with CWM
1) Download Odin (http://androidfirmwares.net/Tools)
2) Download root kernel m(http://d-h.st/Bcf)
3) Flash it via Odin
-- Extract .zip
-- load the root kernel in Odin (as PDA)
-- Put SGSII in download mode (Vol-, Home and Powerbutton)
-- Press "Start"
4) Phone should reboot by itself
1) Download Links (see at the bottom)
2) Put it on internal sd card
3) Go into recovery mode
4) DO A FULL WIPE!! (U won't loose ur backup on sd card [but u can copy it to PC, too, if u want])
-- wipe data/ factory reset
-- wipe cahe partition
-- advanced > wipe dalvik cache
-- mount and storage > format data/system/cache
5) Then flash Rom
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Then flash Gapps
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
7) Recovery > wipe cache partition
8) Recovery > advanced > wipe dalvik cache
9) Then flash Dorimanx
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Reboot and u r done!
Links:
ROM u can choose what u like - I'm using at the moment this: http://goo.im/devs/RootBox/RootBox_i9100_jb/RootBox-JB-i9100-V3.2.zip
Dorimanx Kernel
Gapps
CHEERS
Hannibal226 said:
Ok this won' listen like the "right" CWM.
So now do this:
=>Flash root kernel with CWM
1) Download Odin (http://androidfirmwares.net/Tools)
2) Download root kernel m(http://d-h.st/Bcf)
3) Flash it via Odin
-- Extract .zip
-- load the root kernel in Odin (as PDA)
-- Put SGSII in download mode (Vol-, Home and Powerbutton)
-- Press "Start"
4) Phone should reboot by itself
1) Download Links (see at the bottom)
2) Put it on internal sd card
3) Go into recovery mode
4) DO A FULL WIPE!! (U won't loose ur backup on sd card [but u can copy it to PC, too, if u want])
-- wipe data/ factory reset
-- wipe cahe partition
-- advanced > wipe dalvik cache
-- mount and storage > format data/system/cache
5) Then flash Rom
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Then flash Gapps
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
7) Recovery > wipe cache partition
8) Recovery > advanced > wipe dalvik cache
9) Then flash Dorimanx
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Reboot and u r done!
Links:
ROM u can choose what u like - I'm using at the moment this: http://goo.im/devs/RootBox/RootBox_i9100_jb/RootBox-JB-i9100-V3.2.zip
Dorimanx Kernel
Gapps
CHEERS
Click to expand...
Click to collapse
Ok. first part of tutorial I think is without problem...
But after I root (by boot the small yellow triangel is located) im not able to start device.... (some jing jang logo is only on display)
Only one different.. can i install it from internal sd card?
Hannibal226 said:
Ok this won' listen like the "right" CWM.
So now do this:
=>Flash root kernel with CWM
1) Download Odin (http://androidfirmwares.net/Tools)
2) Download root kernel m(http://d-h.st/Bcf)
3) Flash it via Odin
-- Extract .zip
-- load the root kernel in Odin (as PDA)
-- Put SGSII in download mode (Vol-, Home and Powerbutton)
-- Press "Start"
4) Phone should reboot by itself
1) Download Links (see at the bottom)
2) Put it on internal sd card
3) Go into recovery mode
4) DO A FULL WIPE!! (U won't loose ur backup on sd card [but u can copy it to PC, too, if u want])
-- wipe data/ factory reset
-- wipe cahe partition
-- advanced > wipe dalvik cache
-- mount and storage > format data/system/cache
5) Then flash Rom
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Then flash Gapps
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
7) Recovery > wipe cache partition
8) Recovery > advanced > wipe dalvik cache
9) Then flash Dorimanx
-- install .zip from sd card > choose .zip from sd card
-- Select the downloaded Custom Rom and flash it
6) Reboot and u r done!
Links:
ROM u can choose what u like - I'm using at the moment this: http://goo.im/devs/RootBox/RootBox_i9100_jb/RootBox-JB-i9100-V3.2.zip
Dorimanx Kernel
Gapps
CHEERS
Click to expand...
Click to collapse
Thanks a lot it will works, but may I install in this way this rom 4.1.2 Jelly Bean I9100XXLSJ also?
[email protected] said:
Ok. first part of tutorial I think is without problem...
But after I root (by boot the small yellow triangel is located) im not able to start device.... (some jing jang logo is only on display)
Only one different.. can i install it from internal sd card?
Click to expand...
Click to collapse
[email protected] said:
Thanks a lot it will works, but may I install in this way this rom 4.1.2 Jelly Bean I9100XXLSJ also?
Click to expand...
Click to collapse
Gr8 to hear, that it worked now.
I think it's bit more clearer for u now, how u can flash any .zip via sd card
Yep u can flash Jelly Bean for sure, too.
It also was the one I choosed for me.
So just do the same like in guide, but replace the Rom with the Jelly Bean .zip.
If it's not a flashable .zip, u have to flash the .tar via odin (like in first part).
Hope u understand all?! :silly:
CHEERS
Hannibal226 said:
Gr8 to hear, that it worked now.
I think it's bit more clearer for u now, how u can flash any .zip via sd card
Yep u can flash Jelly Bean for sure, too.
It also was the one I choosed for me.
So just do the same like in guide, but replace the Rom with the Jelly Bean .zip.
If it's not a flashable .zip, u have to flash the .tar via odin (like in first part).
Hope u understand all?! :silly:
CHEERS
Click to expand...
Click to collapse
So I downloaded the I9100XXLSJ_I9100OXXLS1_OXX.zip fiel. When I unzip this package i can find some more files like:
CODE_I9100XXLSJ.zip
CSC_HOME_OXX_I9100OXXLS1.zip
MODEM_I9100XXLS6.zip
CHECKSUM
emmc_EXT4_16GB.pit
So which one i should choose to flash it from the internal card?
[email protected] said:
So I downloaded the I9100XXLSJ_I9100OXXLS1_OXX.zip fiel. When I unzip this package i can find some more files like:
CODE_I9100XXLSJ.zip
CSC_HOME_OXX_I9100OXXLS1.zip
MODEM_I9100XXLS6.zip
CHECKSUM
emmc_EXT4_16GB.pit
So which one i should choose to flash it from the internal card?
Click to expand...
Click to collapse
all of them, via ODIN!
If u unzip them again, u should the .tar or .md5 files.
1) Load files
code.tar in PDA
modem.tar in PHONE
csc.tar in CSC
.pit file u load in PIT
2) Connect phone to PC
- bring phone in download mode (Vol-,Home and Powerbutton)
- connect via usb cable
3) Odin should recognized the phone
4) Check the "re-partition"
5) START
That's all. But then u don't have any root then. if u need u have to flash a rooted one via Odin afterwards, but first let the LS1 run on ur phone
Much success,
CHEERS
SIP
Is SIP account available in JB?
Please, i am new in it and i don't understand it very well.
i'd like to have Revolutionary S5 V3 intalled in my s3, so could you help me with exactally the files to download and the steps to install the rom?
thanks
marcoabpaes said:
Please, i am new in it and i don't understand it very well.
i'd like to have Revolutionary S5 V3 intalled in my s3, so could you help me with exactally the files to download and the steps to install the rom?
thanks
Click to expand...
Click to collapse
Hello if you want to have the rom installed on your device the steps to install this rom are "
Step 1 - Download Revolutionary S5 Android 4.4.2 ROM for Galaxy S III to your computer.
Step 2 - Connect and mount your Galaxy S3 USB memory on your computer using the USB cable.
Step 3 - Now copy/paste the downloaded Android 4.4.2 ROM zip file to your SD card. Make sure the file is in the SD card root (not in any folder).
Step 4 - Then turn OFF your phone and disconnect from the USB cable.
Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together.
Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset” Use the Power button to select everything while in the Recovery Mode.
Step 7 - Then, perform a cache wipe by selecting “wipe cache partition”
Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.
Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.
Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate to the Android 4.4.2 ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.
Step 11 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” from the recovery menu.
after this your phone will take roughly five mins to download
the download link is http://forum.xda-developers.com/devdb/project/dl/?id=4922
sorry if a rule has been broken giving a link
thanks, i got confused because there are lots of information in the topic, like DUALBOOT , Bloat content, Extra's content and Theming content.
Do i have to download all that?
marcoabpaes said:
thanks, i got confused because there are lots of information in the topic, like DUALBOOT , Bloat content, Extra's content and Theming content.
Do i have to download all that?
Click to expand...
Click to collapse
Hello
Just to explain dual boot is only if you want to run two different roms on your phone such as stock samsung rom and s5 sensation, bloat content is included with the rom and during the installtion you are asked what you want to install and what you don't depending on your needs this also happens with the extra content and theming content however more can be downloaded from the developer how ever most other content for a rom that isnt included with the rom isnt really needed.
Ok. I will try that. Thank you
Sent from my GT-I9300 using XDA Free mobile app
i have been reading this thread to update my tablet
[ROM][P7320/P7320T][JB 4.1.2] Unofficial CyanogenMod 10 [2013-12-22] "FINALLY"
from the instructions
4. put the file(s) on your sdcard.
5. start into CWM recovery (again: as described above)
6. Select "install zip from sdcard" -> "select zip from sdcard"->"signed_GTP7320T_glitschis_kernel_v_0_3.zip" and confirm selection by choosing "Yes - Install ....." to install the kernel. (reverting to stock also works this way, just choose the stock kernel zip (see 3.))
Click to expand...
Click to collapse
my tablet has no sdcard loction, only sim slot, is there some alternative to the install without sdcard?