Hello everybody,
I am new to XDA developers. I am pretty good with pc's and that kind of stuff, but I have recently bought my first android phone (Xperia P).
So i am a bit of a noob when it comes to phones.
Today I connected my phone to copy some stuff to it from my pc. Sony PC Companion popped up and I saw there was a firmware update. So i started the update, but it was thundering outside. I saw that it was still downloading the software and not installing, but I already connected my phone in wich state you can update it (you know volume button down and my phone connected to my pc) So i pulled the plug out of it thinking it would still boot up like normally, but that was not the case.
My phone won't boot up now the only thing i see now is SONY when i try to turn it on.
My phone is not rooted and my bootloader is locked.
If anyone knows how to solve this problem that would be great.
Long story short:
Pulled the plug of my usb cable out to early while updating with PC companion. Now it won't start
(Sorry for my English I am only 15 and English is not my 1st language)
If it boots to Sony logo you can download Flashtool program, install it, download latest JB firmware from P section and put it in Flashtool/Firmwares folder, start Flashtool and connect your phone with Vol- to put it in flashmode and flash official firm via flashtool.
Thanks for your help. I will see what I can do since i have absolutely no idea how to flash my phone
EDIT: Thank you very much I figured it out and it worked
Related
okey i unlocked the bootloade with this tut: http://forum.xda-developers.com/showthread.php?t=1254225 then i had "no service" on my phone (i think beacuse i used the msm7227_Setool2.cmd). first i thought it might be an problme with the software so i installed MiniCM7-2.1.3 because the bootloader was unlocked. but htat didnt fix it. but now i accidentally flashed it with the stock kernel. it wont boot and it wont go into flashmode. so can you plz give me any suggestions how to solve this problem? thanks!
sorry if i made any mistakes im new to this forum
it just shows the sony ericsson logo
have you tried pc companion and update service it may get your phone working.
yes but it says i have to activate the usb on it to connect/use it with pc companion. and as i doesnt boot, i cant do this.
Have you tried se update service as you say your phone is not booting.
If update service can't do the magic then you will have to go for flashing tool ....
i cant get into flashmode (when the green led is on). so update service and pc companion dont detect it
now use flashtool and follow all the instruction on this link below
http://forum.xda-developers.com/showthread.php?t=825664
ok im trying this one
okey im desperate here, maybe you posted a wrong link or what ever. i tried to flash with flashtool. i even created a bundle. but is still not recognising it in flash mode.
okey solved it
took the battery cable out pushed the back button and put the cable back in place then i plugged the usb cable in and it wet into flashmode
finally i just relocked my bootloader with s1tool
thanks for your help
I have two x10 unlocked a total functional
the other trying to do the same, do not care anymore.
and even with FlashTool Debranding but not start.
connects the screen but does not appear or the sony logo.
what to do, someone help me.
he is in total Debranding mamento with android 1.6
sorry but I do not know English, using google translator.
A quick reply, go to sony ericsson site download PC companion to your computer.
Install PC companion to your computer
Connect phone to computer
Click repair.
amrth said:
A quick reply, go to sony ericsson site download PC companion to your computer.
Install PC companion to your computer
Connect phone to computer
Click repair.
Click to expand...
Click to collapse
I tried the one message that says
Your phone already has the latest softwere
I can do for FlashTool, everything happens in a good
but when you plug the x10 he is with the backlight on
but not in the game
Try flashing one of these in flashtool
http://forum.xda-developers.com/showthread.php?t=936733
gleybert said:
I tried the one message that says
Your phone already has the latest softwere
I can do for FlashTool, everything happens in a good
but when you plug the x10 he is with the backlight on
but not in the game
Click to expand...
Click to collapse
Ok do this,
What does the flashtool state when your phone is connected with the backlight on?
Device disconnected? in MTP mode?
Check the adb drivers and if possible reinstall them
BTW how did you get into this problem? did you try to update a firmware or kernel or what?
Then Try this trick!!!
* Remove the battery.
* Connect your phone to system with the battery still out.
* Now hold the back button and put the battery on, green led will glow.
* Now you are on flash mode and this would stay for not more than 5-10 secs, You should have quick fingers, so that you should select the firmware or any update within those ten sec's. Keep trying this will work...
Get all the necessary files in place before you try this.
Plz help me.
My xperia x10 not booting.it stocks on sony ericsson logo.
what i did is....
1) My phone is rooted
2) i have xrecovery 0.3 installed
3) I installed latest doom kernel for locked bootloaders
4) i am tryed to update rom to latest CosmicUI rom found on Development forum
5) i forget the that rom only for unlocked bootloaders
6) i am not change the kernel to CosmicUI kernel.
7) after installing rom my phone rebooted and stock on sony ericsson logo
8) i am connected the phone to PC.but it is not detected.
9) i installed xparia x10 ADB & Flash drivers, Flashtool, Sony ericsson PC companion.Still it is not detected in Flash tool and Sony PC Companion.PC shows Unknown device.
Please help me to solve this,
Sorry for my bad english.
Try uninstall Pc companion & drivers and install them again, maybe it detects your phone after that
do not panic. It happened to me last week. Phone won't register on pc until you connect in flash mode to flash a new FW with flashtool. You may already know this but
1)DON'T CONNECT PHONE
2) Start FlashTool in flash mode, choose ur ftf, click ok.
3)Wait until the screen prompts you to plug in ur device.
4)Hold the back button while plugging the usb cable into the phone (make sure it is connected to pc first though)
5) Phone should start flashing, wait until it completes.
If step 5 doesn't take try again from step 2.
AGAIN DON'T WORRY!! Happens all the time.
hit thanks when ur done
Sony erricson xperia x1a- hangs after booting
Hi my sony erricson xperia x1a(Windows mobile6.1 os ) hangs after booting, Ive installed few apps before its gets hanged.
Let me know the solution for this.
devon411 said:
do not panic. It happened to me last week. Phone won't register on pc until you connect in flash mode to flash a new FW with flashtool. You may already know this but
1)DON'T CONNECT PHONE
2) Start FlashTool in flash mode, choose ur ftf, click ok.
3)Wait until the screen prompts you to plug in ur device.
4)Hold the back button while plugging the usb cable into the phone (make sure it is connected to pc first though)
5) Phone should start flashing, wait until it completes.
If step 5 doesn't take try again from step 2.
AGAIN DON'T WORRY!! Happens all the time.
hit thanks when ur done
Click to expand...
Click to collapse
Hi all!
My brother has an x10 mini pro. When i asked him what is the phone exactly, he only said xperia mini pro. (I'm not familiar with SE, most playin with my SGS phones.) I've used the SE Extreme Tweak tool to get CWM on the phone (already rooted successfully, debugging turned on) but that was for Xperia Mini Pro. I can't do nothing, no flash- or recovery mode. Don't know what should i do, i think i've bricked his phone totally, Windows doesn't recognize at all.
wintercounter said:
Hi all!
My brother has an x10 mini pro. When i asked him what is the phone exactly, he only said xperia mini pro. (I'm not familiar with SE, most playin with my SGS phones.) I've used the SE Extreme Tweak tool to get CWM on the phone (already rooted successfully, debugging turned on) but that was for Xperia Mini Pro. I can't do nothing, no flash- or recovery mode. Don't know what should i do, i think i've bricked his phone totally, Windows doesn't recognize at all.
Click to expand...
Click to collapse
Download and install Sony PC Companion
Leave the phone disconnected from the PC
Choose update
PC Companion won't recognise the phone because it is disconnected and offer a repair link
Choose that, accept to loose all data, it will ask you to identify the model and download the firmware for it
It will ask you to connect your phone in flashmode
(Either: if phone is turned off, press and hold the back-button and plug in the usb-cable, OR connect your phone with the usb-cable, press Home and Powerbutton together until the screen goes black, then release those buttons and press the back-button. Either way the led will go green and PC Companion will start to flash the stock firmware to the phone)
Done
If PC Companion gives you the message that there is no firmware for the phone we'll have to figure something else, but try those steps above first
i think you should try seus (sony ericsson update service) to repair your phone
if u want you can download it from here: http://www.sonymobile.com/global-en/tools/update-service/ and follow the steps on the screens and repair ur phone
Hey guys,
So I wanted to try out the newest CM12 ROM with A5.0 but seems like it didnt exactly happen how I wanted it. Rooting the device and then installing the XZDualRecovery without a problem. Then downloaded the ROM and gapps.
I have SGP311 (pollux_windy) so I downloaded that version of the CM12 at first. It said that my device is pollux, which I ofc was dumb enough to just skip and download the pollux ver and then install that one. So I installed the pollux ver instead of pollux_windy and when I hit restart device I didnt see it boot again.
So I wanted to connect it to my PC, PC didnt recognize it ofc. Only way my PC regonizes my tab is by fastboot mode. I had to install a driver for that. And even then only the Sony Mobile Flasher by Androxyde recognised it. I run into bootloop various times before with my tab and Emma always fixed it but thats unfortunately not the case here as Emma doesnt recognise it either :/
So now here's the problem, I can only do fastboot mode (not flashmode) and the only program able to do sth with my device is this Sony Mobile Flasher. I downloaded a official FW there and wanted to install it but it required me to go into the flashmode which I can't.
Is there sth I can do? The only thing working is the LED and fastboot mode.
Is there a way to put the device into flashmode via PC, that would solve all issues or maybe a trick to go into flashmode? As there was some thread about it but the thing they did didnt work for me :/
Please help
Thanks in advance
Nevermind, I just forgot how to use Emma....
For anyone to whom this happens:
Computer: Open Emma from the Start menu of your computer.
Connect a USB cable to your computer.
Phone: Turn off your tab.
Connect your tab to the USB cable while holding the VOLUME DOWN.
Computer: Select the software you want to flash in the Service list. The tool automatically detects the tab and lists available software versions, which are called Services in this flash tool.
Click on Apply Service. The tab will now be flashed.
Phone: When you have flashed your device, you can disconnect your phone from the computer. The first time you start your device after you have flashed it, the boot-up might take a little longer than normal.