Does anyone know where i could buy a new power switch for my YPG1, my current one has gotten crushed and quit working but everything else works. i need to find a replacement one to replaced the crushed button with.
please help i looked everywhere.
PS. if anyone has one with a working board that they are willing to give me that would work to. I rely on this device for work.
To henk5066
henk5066 said:
Does anyone know where i could buy a new power switch for my YPG1, my current one has gotten crushed and quit working but everything else works. i need to find a replacement one to replaced the crushed button with.
please help i looked everywhere.
PS. if anyone has one with a working board that they are willing to give me that would work to. I rely on this device for work.
Click to expand...
Click to collapse
Is your device rooted or modified?
If not you could give it to a Samsung Service Center and they will repair it.
If your device is rooted just try giving it to a service center, in most cases they will
repair it also, because the most people at Samsung aren't checking your firmware.
Androthan
Related
Hello all! I was wondering if anyone had any clue where batteries compatible with this device are available? My device got wet and won't turn on, out of curiosity I swapped out the battery inside with a friend's and it booted right up!
I already tried Samsung's customer service and because it's not covered by warranty it'll cost me $40 plus the cost of the replacement battery ($51) Also the battery is on back order.
I really don't want to pay half the cost of a new player just to mine working again.
Thank you for your time.
MontyKensicle said:
Hello all! I was wondering if anyone had any clue where batteries compatible with this device are available? My device got wet and won't turn on, out of curiosity I swapped out the battery inside with a friend's and it booted right up!
I already tried Samsung's customer service and because it's not covered by warranty it'll cost me $40 plus the cost of the replacement battery ($51) Also the battery is on back order.
I really don't want to pay half the cost of a new player just to mine working again.
Thank you for your time.
Click to expand...
Click to collapse
Hmm... since these batteries are not supposed to be user serviceable, I am not sure what other choice you would have. Maybe ask around here and see if anyone has a busted player for cleap.
Good luck.
MontyKensicle said:
Hello all! I was wondering if anyone had any clue where batteries compatible with this device are available? My device got wet and won't turn on, out of curiosity I swapped out the battery inside with a friend's and it booted right up!
I already tried Samsung's customer service and because it's not covered by warranty it'll cost me $40 plus the cost of the replacement battery ($51) Also the battery is on back order.
I really don't want to pay half the cost of a new player just to mine working again.
Thank you for your time.
Click to expand...
Click to collapse
try this link maybe ull find something worth pursuing in their
http://www.samsungparts.com/Products/Parts_and_Accessories/PID-GM43-01010A.aspx?model=YPG70CW
me myself and i said:
try this link maybe ull find something worth pursuing in their
http://www.samsungparts.com/Products/Parts_and_Accessories/PID-GM43-01010A.aspx?model=YPG70CW
Click to expand...
Click to collapse
Tried the link but they don't send overseas. Any other place I can find replacement batteries??
blacklightning said:
Tried the link but they don't send overseas. Any other place I can find replacement batteries??
Click to expand...
Click to collapse
Maybe this could be what you're looking for?
http://www.ebay.com/itm/Original-Sa..._Cell_Phone_PDA_Batteries&hash=item417366d1b8
http://www.ebay.com/itm/Original-Sa..._Cell_Phone_PDA_Batteries&hash=item35cf3214cb
TheKryptonite said:
Maybe this could be what you're looking for?
http://www.ebay.com/itm/Original-Sa..._Cell_Phone_PDA_Batteries&hash=item417366d1b8
http://www.ebay.com/itm/Original-Sa..._Cell_Phone_PDA_Batteries&hash=item35cf3214cb
Click to expand...
Click to collapse
Thank you very much, I totally forgot to search on ebay . I'm on vacation right now, I will order the replacement batteries ASAP. Thank you again for your help.
Does anyone know how to replace the Charging/USB Port for the Thunderbolt? I've got a dead port and I don't wanna have to send in my phone to get replaced and for them to send me back a refurb. Don't wanna deal with having to reroot my phone since it's been forever and I honestly don't remember how to! If anyone knows how, or if you know someone who does, or even a youtube link, that would be great!:good:
mkhang said:
Does anyone know how to replace the Charging/USB Port for the Thunderbolt? I've got a dead port and I don't wanna have to send in my phone to get replaced and for them to send me back a refurb. Don't wanna deal with having to reroot my phone since it's been forever and I honestly don't remember how to! If anyone knows how, or if you know someone who does, or even a youtube link, that would be great!:good:
Click to expand...
Click to collapse
I had the same issue with my old phone... but the cheapest port replacement I could find was like $60. Then I'm pretty sure it involved either soldering or changing out the logic board.
Wasn't worth the money and work for me.
If it came down to replacing it with Asurion, you will get a refurbished one. When I received mine, it had GPS issues. If you send it back a few times and complain about how crappy their refurbished ones are, you'll get a new one. If they can't give you a new one, they will offer you something different. One of my buddies got a nexxus out of the deal... not too shabby.
Sent from my ADR6400L using xda premium
See if there's any help here:
http://www.youtube.com/watch?v=v3rjgVsSWxQ
It will show you how to remove the motherboard, you should be able to go from there if you can solder/unsolder.
Thanks guys! I guess I'll consider getting a refurbished phone :/
Sent from my ADR6400L using xda app-developers app
I recently physically replaced my charging port on my samsung galaxy note SGHI717. Now after the charging works, my touchscreen is unresponsive. I rechecked the the guts to see if everything is fastened and attached and everything seems ok. I also tried to reboot the system with the help of a online technical support agent. Still no response with the touchscreen. Please help. If possible, Can you email me a detailed diagram of the hardware responsible for the touchscreen. Thanks
childofGod122 said:
I recently physically replaced my charging port on my samsung galaxy note SGHI717. Now after the charging works, my touchscreen is unresponsive. I rechecked the the guts to see if everything is fastened and attached and everything seems ok. I also tried to reboot the system with the help of a online technical support agent. Still no response with the touchscreen. Please help. If possible, Can you email me a detailed diagram of the hardware responsible for the touchscreen. Thanks
Click to expand...
Click to collapse
WOW, that's a good one. definitely beyond me.
however,
there is a member by the name of SHAYNEFLASHINDAILY who has apparently done this a few times. not sure if you can, but you can try and PM him. I am sure he would respond. if you cant PM due to your post count and limited access until that point, let me know and I will PM him for you and direct him to your thread.
good luck with this one buddy
I would take it all out again and check all connections and make sure you have connected them back correctly because some of them can be tricky.haven't heard of that happening till now ... It has to be a connection.....
2$HAYNE
Thank you sir.
Thank you shane..I did that already but I will take it apart again and reconnect everything....
Compare your original board with the replacement. The international note and ours have #almost# identical parts but are not interchangable. The lcd/digitizer has three clips to check as well.
Its either bad part, incorrect part, or bad connection.
That is also correct.I'm thinking you may have bought the international part like ranger said
2$HAYNE
Thank you you very much for your help. Is there a website that I can see the layout of the lcd digitilizer chip for the touchscreen? I appreciate all the help. Im hoping to get it working soon.....#fingerscrossed
Just Google both att and international versions ..there also is a video on changing the port on YouTube ...good luck
2$HAYNE
Thank you very much. I followed the video to change the port already. Which I did and the touchscreen was unresponsive.
Then hopefully its the wrong port .. Hope you get it figured out bro
2$HAYNE
recently my s2 was over run by car
its LCD was cracked
I tried to charge it and try to turn it on
I saw glowing button at bottom of my phone but after that I was not able to turn it own
I want to repair it by my own please help me??
No chance. If you have to ask, you won't be repairing it on your own. Why ? If you had the necessary knowledge/skills, you'd be resourceful enough to have already found out the extra info you might need.
Take it to someone who knows what they're doing, or if you fancy rendering the phone permanently unusable, search for the service manuals; they've been posted here before & a Google search should turn them up.
MistahBungle said:
No chance. If you have to ask, you won't be repairing it on your own. Why ? If you had the necessary knowledge/skills, you'd be resourceful enough to have already found out the extra info you might need.
Take it to someone who knows what they're doing, or if you fancy rendering the phone permanently unusable, search for the service manuals; they've been posted here before & a Google search should turn them up.
Click to expand...
Click to collapse
i think i can do this on my own under proper instructions
So find the service manuals & have a go at it...
can any told me it just light up once
How do you honestly expect anyone here to diagnose a phone that's been runover by a car without having the phone in front of them ? Be prepared to be very disappointed. You also just proved my suggestion that you're not capable of fixing it with that post of yours; save yourself time/grief & take it to someone skilled in repairing phones. Or sit here in this thread expecting the impossible for days/weeks/whatever *shrugs*
Send a email to Jeremy Clarkson from Top Gear
if it was crushed by nissan gt-r then you're screwed
:crying: I have HTC One X+ 64gb Telus which is rooted,s-off and boot loader unlocked. I am using Elegancia 6.2.0. I don't know what happened to it. Suddenly Capacitive buttons are not working as light are working. In past it never dropped and I Nevar sit on it. I don't know why it happened. Now i am using LMT launcher from which I am not satisfied and thinking about repairing it. In my city there are no HTC service center but there is a collection point(I don't know what it is??? ) . I searched about this on Internet and found that it may be problem of Digitizer. So, My questions are:
1. By replacing LCD+Digitizer would solve this problem? If yes, then which variant should I buy SHARP or SONY version? As mine is Telus version.
2. Should I go to Collection Point in my city ?
3. Or should I take risk of doing dis-assembly of it ?
4. Or Should I buy a LCD+Digitizer from internet and do replacement by local mobile repairs?
PS: I bought it 2 months ago from ebay and it doesn't have manufacturer warranty. And sorry for my bad english
veer.killerboy said:
:crying: I have HTC One X+ 64gb Telus which is rooted,s-off and boot loader unlocked. I am using Elegancia 6.2.0. I don't know what happened to it. Suddenly Capacitive buttons are not working as light are working. In past it never dropped and I Nevar sit on it. I don't know why it happened. Now i am using LMT launcher from which I am not satisfied and thinking about repairing it. In my city there are no HTC service center but there is a collection point(I don't know what it is??? ) . I searched about this on Internet and found that it may be problem of Digitizer. So, My questions are:
1. By replacing LCD+Digitizer would solve this problem? If yes, then which variant should I buy SHARP or SONY version? As mine is Telus version.
2. Should I go to Collection Point in my city ?
3. Or should I take risk of doing dis-assembly of it ?
4. Or Should I buy a LCD+Digitizer from internet and do replacement by local mobile repairs?
PS: I bought it 2 months ago from ebay and it doesn't have manufacturer warranty. And sorry for my bad english
Click to expand...
Click to collapse
Friend getting it replaced wont be the wisest decision, I would suggest you to try some other ROMs like ASOP CM10.2 version and see if the problem persists, since the lights are working. Hope if that dosent work replacing the LDC will take some thing around Rs 8000 Indian. I don't know about the make of the Sceen, but I guess going to the collection point might just help, else if you can get it to Bhopal or some thing.
Don't risk dis-assemble it, if you are not sure what you are doing .
Well getting the LCD+Digitizer from ebay I just don't know since it hard to find the OEM version ...
Good news !!!
ethanon said:
Friend getting it replaced wont be the wisest decision, I would suggest you to try some other ROMs like ASOP CM10.2 version and see if the problem persists, since the lights are working. Hope if that dosent work replacing the LDC will take some thing around Rs 8000 Indian. I don't know about the make of the Sceen, but I guess going to the collection point might just help, else if you can get it to Bhopal or some thing.
Don't risk dis-assemble it, if you are not sure what you are doing .
Well getting the LCD+Digitizer from ebay I just don't know since it hard to find the OEM version ...
Click to expand...
Click to collapse
:victory: Thanks a lot for reply friend, I think there is some problem in ELEGANCIA as I switched tp CM10.2 it works again normally, Now I am sure that it's not HARDWARE PROBLEM, its SOFTWARE. :good:
OBSERVATIONS OF CAPACITIVE BUTTON :
1. In ELEGANCIA works for 12 hrs(Approx)
switched to CM10.2, They working again... :good: :laugh: :victory:
veer.killerboy said:
:victory: Thanks a lot for reply friend, I think there is some problem in ELEGANCIA as I switched tp CM10.2 it works again normally, Now I am sure that it's not HARDWARE PROBLEM, its SOFTWARE. :good:
OBSERVATIONS OF CAPACITIVE BUTTON :
1. In ELEGANCIA works for 12 hrs(Approx)
switched to CM10.2, They working again... :good: :laugh: :victory:
Click to expand...
Click to collapse
Good to know it worked .