Related
The JKKJ1 is latest stock 3.2 version for the WIFI only version tablet (the 7510),
Can someone please upload the rom to the dev section?
it has reported a much smoother operation on it than any 3.1 roms.
Stock JKKJ1 is not yet available. But a custom JKKJ1 ROM with some tweaks are available here: http://forum.xda-developers.com/showthread.php?t=1340064
ansonantonym said:
Stock JKKJ1 is not yet available. But a custom JKKJ1 ROM with some tweaks are available here: http://forum.xda-developers.com/showthread.php?t=1340064
Click to expand...
Click to collapse
It is stock, compiled by task650 from what was given to him. However, he added a couple of stuff of his own. I think he also rooted it but that can be undone.
However, I think he's planning on compiling a normal stock untouched. Keep tuned to that post!
advocator said:
It is stock, compiled by task650 from what was given to him. However, he added a couple of stuff of his own. I think he also rooted it but that can be undone.
However, I think he's planning on compiling a normal stock untouched. Keep tuned to that post!
Click to expand...
Click to collapse
i will put it together and throw it on the op of my thread when its done downloading.
Task650 is awesome.
Thanks to him, now you guys got an untouched 3.2 touchwiz!
http://forum.xda-developers.com/showthread.php?t=1340064
Task650
Task650 I love you
Task650 number one
Task650 bro
task650 said:
i will put it together and throw it on the op of my thread when its done downloading.
Click to expand...
Click to collapse
Hi Task650; I'm new to android. Could you please give me 123 steps to flash your 3.2 to my GT-P7510.
ajshaikh said:
Hi Task650; I'm new to android. Could you please give me 123 steps to flash your 3.2 to my GT-P7510.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1340064
Follow the instructions of the thread up.
Hi
So I've been trying to find a kernel that works with Supernexus 2.0 on my GT-I9300. Haven't found any, so that's why I'm asking from you, are there any kernels that I could flash to my GT-I9300 (aka Samsung Galaxy S3) running Supernexus 2.0 Android 4.2.2?
Ps. Overclockable prefered. Thanks
me too. Flashed the siyah 1.8.9 before I found out it doesn't support 4.2.2!
Been searching but can't seem to find any other kernels..
Anyone?
gijoe50000 said:
me too. Flashed the siyah 1.8.9 before I found out it doesn't support 4.2.2!
searching but can't seem to find any other kernels..
Anyone?
Click to expand...
Click to collapse
Siyah just goes to bootloop, it says it supports CM10.1 but it doesn't support SuperNexus 2 or CM10.1
Well I'm not a patient dude, so I'm now happy user of Carbon ROM 4.2.2 which has kernel that can be clocked to whopping 2,0Ghz!
Thanks for answering
hi , i have used for some days aokp, cm10.1 rom s with temasek kernel its compatible with stweak you can try it tell me if this work for you
http://forum.xda-developers.com/showpost.php?p=29339117&postcount=4
zenosteam said:
hi , i have used for some days aokp, cm10.1 rom s with temasek kernel its compatible with stweak you can try it tell me if this work for you
http://forum.xda-developers.com/showpost.php?p=29339117&postcount=4
Click to expand...
Click to collapse
I wanted to try it, but I can't find the download link anywhere from the page, just the source links >.< . Could you post the download link?
WannabeDeveloper said:
Siyah just goes to bootloop, it says it supports CM10.1 but it doesn't support SuperNexus 2 or CM10.1
Well I'm not a patient dude, so I'm now happy user of Carbon ROM 4.2.2 which has kernel that can be clocked to whopping 2,0Ghz!
Thanks for answering
Click to expand...
Click to collapse
Yea it supports CM 10.1 on 4.2.1, but not 4.2.2! I'm bootlooping at the moment!
hi , i have used for some days aokp, cm10.1 rom s with temasek kernel its compatible with stweak you can try it tell me if this work for you
http://forum.xda-developers.com/show...17&postcount=4
Click to expand...
Click to collapse
Thanks man,
I'll give it a go..
---------- Post added at 08:19 PM ---------- Previous post was at 07:50 PM ----------
WannabeDeveloper said:
I wanted to try it, but I can't find the download link anywhere from the page, just the source links >.< . Could you post the download link?
Click to expand...
Click to collapse
I was having the same trouble, that was only source. Finally found it though, working now
heres the link to the zip: http://temasek.hopto.org/?dir=Samsung Galaxy S3 - i9300/CM10.1/Temasek Kernel
enjoy guys
here it the linkk for the rom if you want nd it's wor on 4.2.2 rom's
http://forum.xda-developers.com/showthread.php?t=1797109&highlight=battery
New Kernel is working fine, but after installing, my WIFI tethering has stopped working. Just "error".
Ah well, back to the stock CM kernel I suppose..
You can use GokHanmoral's SiyahKernel on all Jelly Bean ROMs. It allows you to overclock your CPU to 1.8GHz and is butter smooth.
Hope I could help!
Lg
get the franco kernel updater app na..
Sent from my GT-I9300 using xda premium
Thanks for everyone who answered!
you can use GokHanmoral's SiyahKernel on all Jelly Bean ROMs. It allows you to overclock your CPU to 1.8GHz and is butter smooth.
Hope I could help!
Lg
Click to expand...
Click to collapse
It will bootloop on 4.2.2 roms :'(
You could try Google not all devs post on XDA .
jje
WannabeDeveloper said:
It will bootloop on 4.2.2 roms :'(
Click to expand...
Click to collapse
BTW, gokhanmoral updated his siyah kernel to 1.9.1
works now with the latest 4.2.2 roms
but not the samsung leaks
also there is a modded siyah kernel called "googy-max kernel"
this on is awesome and also rock-stable
not to mention the battery life and the governors
just google it up and flash it
if i helped, please hit the thanks button.
Hi guys,
I am newbie, my S3 i9300 is using temasek 10.1 rom and his amazing lastest kernel. About batterylife saving, I am trying to find out the ASV version of my S3 to get right value for stweak app by flashing perseus kernel together with flashing unchecksetonboot.zip as manual but I faced the bootloop, my S3 could not started. I have tried the ways (only flash perseus kernel (36.3) or flash perseus kernel together with flashing unchecksetonboot.zip) but it was not booted. I do not know how to solve this.
I could not post my question in Temasek's thread because i am newbie. Is there someone else like me and any help for me, please!
I hope Temasek can see my question.
Thanks a lot!
vinhtq79 said:
Hi guys,
I am newbie, my S3 i9300 is using temasek 10.1 rom and his amazing lastest kernel. About batterylife saving, I am trying to find out the ASV version of my S3 to get right value for stweak app by flashing perseus kernel together with flashing unchecksetonboot.zip as manual but I faced the bootloop, my S3 could not started. I have tried the ways (only flash perseus kernel (36.3) or flash perseus kernel together with flashing unchecksetonboot.zip) but it was not booted. I do not know how to solve this.
I could not post my question in Temasek's thread because i am newbie. Is there someone else like me and any help for me, please!
I hope Temasek can see my question.
Thanks a lot!
Click to expand...
Click to collapse
TL;DR: before flashing aside from known issues in the second post.
This isn't an AOSP kernel. I won't work with CM and AOSP derivatives.
DOESN'T WORK ON SAMSUNG JELLYBEAN 4.2.1 ROMS.
JustArchi said:
TL;DR: before flashing aside from known issues in the second post.
This isn't an AOSP kernel. I won't work with CM and AOSP derivatives.
DOESN'T WORK ON SAMSUNG JELLYBEAN 4.2.1 ROMS.
Click to expand...
Click to collapse
It is my BAD.
I have read this but till do not know why, I do know that temasek's rom is an CM derivative. Perseus kernel is not AOSP kernel. So could you guys teach me what ROM (AOKP rom but not CM) I have to flash to be compatible with perseus kernel? i am confused
Sorry for my BAD.
vinhtq79 said:
It is my BAD.
I have read this but till do not know why, I do know that temasek's rom is an CM derivative. Perseus kernel is not AOSP kernel. So could you guys teach me what ROM (AOKP rom but not CM) I have to flash to be compatible with perseus kernel? i am confused
Sorry for my BAD.
Click to expand...
Click to collapse
All Samsung (or Sammy) derivatives that means all Rom with XX... in its name, MC3, etc. And 4.1.x only. See thread's titles it's written there.
Striatum_bdr said:
All Samsung (or Sammy) derivatives that means all Rom with XX... in its name, MC3, etc. And 4.1.x only. See thread's titles it's written there.
Click to expand...
Click to collapse
You open my mind! I am too stupid to think that Sammy ROM derivatives is AOSP, My BAD.
Even I do not really understand about AOSP ROM because of this words " The name is often co-opted for custom ROMs that are very close to the original AOSP, from What's the difference between an AOSP ROM and a stock ROM?"
But as you teach me, I will chose a Sammy ROM derivatives without the AOSP note in ROM.
Iam downloading a [ROM][MC3][JKAY] Purelook HD v5.0 I SGS 4 + Xperia Z ROM. Hope it works.
I will try to improve my self step by step.
Thank you! :highfive:
vinhtq79 said:
You open my mind! I am too stupid to think that Sammy ROM derivatives is AOSP, My BAD.
Even I am not really understand about AOSP ROM because of this words " The name is often co-opted for custom ROMs that are very close to the original AOSP, from What's the difference between an AOSP ROM and a stock ROM?"
But as you teach me, I will chose a Sammy ROM derivatives without the AOSP note in ROM.
Iam downloading a [ROM][MC3][JKAY] Purelook HD v5.0 I SGS 4 + Xperia Z ROM. Hope it works.
I will try to improve my self step by step.
Thank you! :highfive:
Click to expand...
Click to collapse
There are 2 main kind of roms - based on samsung sources and based on aosp sources (cyanogenmod). They're not compatible with each other, that means kernels, mods, themes etc.
Most AOSP Roms have 4.2.2 Android while Sammy have 4.1.2.
JustArchi said:
There are 2 main kind of roms - based on samsung sources and based on aosp sources (cyanogenmod). They're not compatible with each other, that means kernels, mods, themes etc.
Most AOSP Roms have 4.2.2 Android while Sammy have 4.1.2.
Click to expand...
Click to collapse
After few affords with help, i found that my S3's ASV version is 06. I am happy now and continue to learn more about tweak for performance and battery. Thanks pro!
Hello, I'm using [ROM] GT-I9100 Resurrection Remix® v4.0.7 [02/09/13] PA.AOKP.CM (4.2.2), and I want to flash the stock kernel, its possible? If yes, I didnt found the link. I need use the 4.2.2 kernel or just the 4.1.2? Im little confused
Thanks
No you can't flash stock kernel, it only can with stock ROM.
and good thing you didn't find stock kernel, cause then you probably would've bricked your device.
(There is no stock kernel compatible with 4.2.2)
Akalsemann said:
No you can't flash stock kernel, it only can with stock ROM.
and good thing you didn't find stock kernel, cause then you probably would've bricked your device.
(There is no stock kernel compatible with 4.2.2)
Click to expand...
Click to collapse
Oh, thank you! I said that because somewhere in the resurrection post someone said to use the stock kernel.
But, can you suggest a good kernel to me? dorimanx is not so good for resurrection remix
Thanks again
Poyta said:
Oh, thank you! I said that because somewhere in the resurrection post someone said to use the stock kernel.
But, can you suggest a good kernel to me? dorimanx is not so good for resurrection remix
Thanks again
Click to expand...
Click to collapse
I think this person meant the 'stock' kernel that comes with the rom. Doesn't the first page of the thread say which one you need?
Donnie Sins said:
I think this person meant the 'stock' kernel that comes with the rom. Doesn't the first page of the thread say which one you need?
Click to expand...
Click to collapse
I searched without succes, so I need to flash the RR kernel, where can I find the download of the kernel separately?
again, thanks
Poyta said:
I searched without succes, so I need to flash the RR kernel, where can I find the download of the kernel separately?
again, thanks
Click to expand...
Click to collapse
Can't you find the kernel file if you extract the downloaded RR rom file..? I've never done that, but sometimes I see such comments passing by
Donnie Sins said:
Can't you find the kernel file if you extract the downloaded RR rom file..? I've never done that, but sometimes I see such comments passing by
Click to expand...
Click to collapse
It should be a zImage file inside the RR zip, look for it. I don't know how to flash it though, but I'm sure there are guides for that
Sent from my GT-I9100 using xda app-developers app
Flash-IS-Bright said:
It should be a zImage file inside the RR zip, look for it. I don't know how to flash it though, but I'm sure there are guides for that
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the tip, I couldnt find this zImage and I made serch on internet, too complicated to me, but I will request this kernel to the autor of the ressurection remix, well, i will try.
thank you so much.
Poyta said:
Thanks for the tip, I couldnt find this zImage and I made serch on internet, too complicated to me, but I will request this kernel to the autor of the ressurection remix, well, i will try.
thank you so much.
Click to expand...
Click to collapse
I believe it's the kernel from CyanogenMod, but you should make sure of that..I just remember that from some thread I read. What comes to selecting a kernel, try starting here http://forum.xda-developers.com/showthread.php?t=1702166 I also suggest searching info in the OP of Resurrection Remix http://forum.xda-developers.com/showthread.php?t=1436854
Flash-IS-Bright said:
I believe it's the kernel from CyanogenMod, but you should make sure of that..I just remember that from some thread I read. What comes to selecting a kernel, try starting here http://forum.xda-developers.com/showthread.php?t=1702166 I also suggest searching info in the OP of Resurrection Remix http://forum.xda-developers.com/showthread.php?t=1436854
Click to expand...
Click to collapse
Thank you a lot, I will search again in these links.
Good Kernel
Poyta said:
Oh, thank you! I said that because somewhere in the resurrection post someone said to use the stock kernel.
But, can you suggest a good kernel to me? dorimanx is not so good for resurrection remix
Thanks again
Click to expand...
Click to collapse
if you want a good kernel,
So u can try ApoloJB kernel
It has 4 vrsn :
ApoloJB Lite
ApoloJB Regiuler
ApoloJB Extreme v1
ApoloJB Extreme v2
Try ane Enjoy Mate
gishanstc said:
if you want a good kernel,
So u can try ApoloJB kernel
It has 4 vrsn :
ApoloJB Lite
ApoloJB Regiuler
ApoloJB Extreme v1
ApoloJB Extreme v2
Try ane Enjoy Mate
Click to expand...
Click to collapse
No!! DONT flash these on RR.
Apolo is for stock based ROMs only. RR is AOSP base. Not compatible.
Sent from a galaxy far, far away
Hey OP, simply reflash the RR v4.0.7 without any wipes and u will have the 'Stock Kernel' ( the one that comes with RR 4.0.7 by default) back on ur phone
---------- Post added at 02:46 PM ---------- Previous post was at 02:43 PM ----------
gishanstc said:
if you want a good kernel,
So u can try ApoloJB kernel
It has 4 vrsn :
ApoloJB Lite
ApoloJB Regiuler
ApoloJB Extreme v1
ApoloJB Extreme v2
Try ane Enjoy Mate
Click to expand...
Click to collapse
Hey @gishanstc do please be sure when u make suggestion like this my friend
Apolo JB kernel wrks only with Stock Sammy or Roms based on it for u, it will not wrk on AOSP/AOKP/CM based roms
Sun90 said:
Hey OP, simply reflash the RR v4.0.7 without any wipes and u will have the 'Stock Kernel' ( the one that comes with RR 4.0.7 by default) back on ur phone
...
Click to expand...
Click to collapse
Is the kernel integrated in boot.img, some threads I read say it would be in zImage file? Just wondering because there's no such file in the zip
Sent from my GT-I9100 using xda app-developers app
Sun90 said:
Hey OP, simply reflash the RR v4.0.7 without any wipes and u will have the 'Stock Kernel' ( the one that comes with RR 4.0.7 by default) back on ur phone
---------- Post added at 02:46 PM ---------- Previous post was at 02:43 PM ----------
Hey @ gishanstc do please be sure when u make suggestion like this my friend
Apolo JB kernel wrks only with Stock Sammy or Roms based on it for u, it will not wrk on AOSP/AOKP/CM based roms
Click to expand...
Click to collapse
Thanks for advice friend!, I searched and read that kernel is for sotck sammy hehe. If I flash my phone will brick
Flash-IS-Bright said:
Is the kernel integrated in boot.img, some threads I read say it would be in zImage file? Just wondering because there's no such file in the zip
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
YES
Oh Im Sorry
Hopper8 said:
No!! DONT flash these on RR.
Apolo is for stock based ROMs only. RR is AOSP base. Not compatible.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Im extremely sorry brother's :crying:
I've just read this thread and I'm wondering if you have read about efs back up and nandroid back up? This is at op BTW. :thumbup:
So I tried installing googy max kernel 1.7.6 on CM 10.2 2013-10-23 nightlies. But when I reboot phone I get the message "Unfortunatley, the process com.android.phone, stopped."
I've googled a lot but I can't find anything. Does it not work to CM 10.2 nightly because googy kernel came out the 18th and the first nightly, at least the first one I can see, came out the 19th?
It's just a thought, but I would really appreciate some help.
lamapung313 said:
So I tried installing googy max kernel 1.7.6 on CM 10.2 2013-10-23 nightlies. But when I reboot phone I get the message "Unfortunatley, the process com.android.phone, stopped."
I've googled a lot but I can't find anything. Does it not work to CM 10.2 nightly because googy kernel came out the 18th and the first nightly, at least the first one I can see, came out the 19th?
It's just a thought, but I would really appreciate some help.
Click to expand...
Click to collapse
if you look on the thread of the kernel theres a lot of people with this issue, i think the dev is working on it
JackHanAnLG said:
if you look on the thread of the kernel theres a lot of people with this issue, i think the dev is working on it
Click to expand...
Click to collapse
ok, thanks!
lamapung313 said:
So I tried installing googy max kernel 1.7.6 on CM 10.2 2013-10-23 nightlies. But when I reboot phone I get the message "Unfortunatley, the process com.android.phone, stopped."
I've googled a lot but I can't find anything. Does it not work to CM 10.2 nightly because googy kernel came out the 18th and the first nightly, at least the first one I can see, came out the 19th?
It's just a thought, but I would really appreciate some help.
Click to expand...
Click to collapse
Did you did CLEAN install?... or you flashed over other ROM?...
Chaitanyapatel8880 said:
Did you did CLEAN install?... or you flashed over other ROM?...
Click to expand...
Click to collapse
Well, firstly I flashed over the ROM, but when it didn't work I tried a fresh install and that didn't work either.
But it looks like alot of people have this problem and the dev is looking into it.
Thanks though!
lamapung313 said:
Well, firstly I flashed over the ROM, but when it didn't work I tried a fresh install and that didn't work either.
But it looks like alot of people have this problem and the dev is looking into it.
Thanks though!
Click to expand...
Click to collapse
Yes.. I just checked on his thread...
If my post had helped you than please press Thanks button. It might be very little for you but VERY BIG for me.