Hello, I'm using [ROM] GT-I9100 Resurrection Remix® v4.0.7 [02/09/13] PA.AOKP.CM (4.2.2), and I want to flash the stock kernel, its possible? If yes, I didnt found the link. I need use the 4.2.2 kernel or just the 4.1.2? Im little confused
Thanks
No you can't flash stock kernel, it only can with stock ROM.
and good thing you didn't find stock kernel, cause then you probably would've bricked your device.
(There is no stock kernel compatible with 4.2.2)
Akalsemann said:
No you can't flash stock kernel, it only can with stock ROM.
and good thing you didn't find stock kernel, cause then you probably would've bricked your device.
(There is no stock kernel compatible with 4.2.2)
Click to expand...
Click to collapse
Oh, thank you! I said that because somewhere in the resurrection post someone said to use the stock kernel.
But, can you suggest a good kernel to me? dorimanx is not so good for resurrection remix
Thanks again
Poyta said:
Oh, thank you! I said that because somewhere in the resurrection post someone said to use the stock kernel.
But, can you suggest a good kernel to me? dorimanx is not so good for resurrection remix
Thanks again
Click to expand...
Click to collapse
I think this person meant the 'stock' kernel that comes with the rom. Doesn't the first page of the thread say which one you need?
Donnie Sins said:
I think this person meant the 'stock' kernel that comes with the rom. Doesn't the first page of the thread say which one you need?
Click to expand...
Click to collapse
I searched without succes, so I need to flash the RR kernel, where can I find the download of the kernel separately?
again, thanks
Poyta said:
I searched without succes, so I need to flash the RR kernel, where can I find the download of the kernel separately?
again, thanks
Click to expand...
Click to collapse
Can't you find the kernel file if you extract the downloaded RR rom file..? I've never done that, but sometimes I see such comments passing by
Donnie Sins said:
Can't you find the kernel file if you extract the downloaded RR rom file..? I've never done that, but sometimes I see such comments passing by
Click to expand...
Click to collapse
It should be a zImage file inside the RR zip, look for it. I don't know how to flash it though, but I'm sure there are guides for that
Sent from my GT-I9100 using xda app-developers app
Flash-IS-Bright said:
It should be a zImage file inside the RR zip, look for it. I don't know how to flash it though, but I'm sure there are guides for that
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the tip, I couldnt find this zImage and I made serch on internet, too complicated to me, but I will request this kernel to the autor of the ressurection remix, well, i will try.
thank you so much.
Poyta said:
Thanks for the tip, I couldnt find this zImage and I made serch on internet, too complicated to me, but I will request this kernel to the autor of the ressurection remix, well, i will try.
thank you so much.
Click to expand...
Click to collapse
I believe it's the kernel from CyanogenMod, but you should make sure of that..I just remember that from some thread I read. What comes to selecting a kernel, try starting here http://forum.xda-developers.com/showthread.php?t=1702166 I also suggest searching info in the OP of Resurrection Remix http://forum.xda-developers.com/showthread.php?t=1436854
Flash-IS-Bright said:
I believe it's the kernel from CyanogenMod, but you should make sure of that..I just remember that from some thread I read. What comes to selecting a kernel, try starting here http://forum.xda-developers.com/showthread.php?t=1702166 I also suggest searching info in the OP of Resurrection Remix http://forum.xda-developers.com/showthread.php?t=1436854
Click to expand...
Click to collapse
Thank you a lot, I will search again in these links.
Good Kernel
Poyta said:
Oh, thank you! I said that because somewhere in the resurrection post someone said to use the stock kernel.
But, can you suggest a good kernel to me? dorimanx is not so good for resurrection remix
Thanks again
Click to expand...
Click to collapse
if you want a good kernel,
So u can try ApoloJB kernel
It has 4 vrsn :
ApoloJB Lite
ApoloJB Regiuler
ApoloJB Extreme v1
ApoloJB Extreme v2
Try ane Enjoy Mate
gishanstc said:
if you want a good kernel,
So u can try ApoloJB kernel
It has 4 vrsn :
ApoloJB Lite
ApoloJB Regiuler
ApoloJB Extreme v1
ApoloJB Extreme v2
Try ane Enjoy Mate
Click to expand...
Click to collapse
No!! DONT flash these on RR.
Apolo is for stock based ROMs only. RR is AOSP base. Not compatible.
Sent from a galaxy far, far away
Hey OP, simply reflash the RR v4.0.7 without any wipes and u will have the 'Stock Kernel' ( the one that comes with RR 4.0.7 by default) back on ur phone
---------- Post added at 02:46 PM ---------- Previous post was at 02:43 PM ----------
gishanstc said:
if you want a good kernel,
So u can try ApoloJB kernel
It has 4 vrsn :
ApoloJB Lite
ApoloJB Regiuler
ApoloJB Extreme v1
ApoloJB Extreme v2
Try ane Enjoy Mate
Click to expand...
Click to collapse
Hey @gishanstc do please be sure when u make suggestion like this my friend
Apolo JB kernel wrks only with Stock Sammy or Roms based on it for u, it will not wrk on AOSP/AOKP/CM based roms
Sun90 said:
Hey OP, simply reflash the RR v4.0.7 without any wipes and u will have the 'Stock Kernel' ( the one that comes with RR 4.0.7 by default) back on ur phone
...
Click to expand...
Click to collapse
Is the kernel integrated in boot.img, some threads I read say it would be in zImage file? Just wondering because there's no such file in the zip
Sent from my GT-I9100 using xda app-developers app
Sun90 said:
Hey OP, simply reflash the RR v4.0.7 without any wipes and u will have the 'Stock Kernel' ( the one that comes with RR 4.0.7 by default) back on ur phone
---------- Post added at 02:46 PM ---------- Previous post was at 02:43 PM ----------
Hey @ gishanstc do please be sure when u make suggestion like this my friend
Apolo JB kernel wrks only with Stock Sammy or Roms based on it for u, it will not wrk on AOSP/AOKP/CM based roms
Click to expand...
Click to collapse
Thanks for advice friend!, I searched and read that kernel is for sotck sammy hehe. If I flash my phone will brick
Flash-IS-Bright said:
Is the kernel integrated in boot.img, some threads I read say it would be in zImage file? Just wondering because there's no such file in the zip
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
YES
Oh Im Sorry
Hopper8 said:
No!! DONT flash these on RR.
Apolo is for stock based ROMs only. RR is AOSP base. Not compatible.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Im extremely sorry brother's :crying:
I've just read this thread and I'm wondering if you have read about efs back up and nandroid back up? This is at op BTW. :thumbup:
Related
Hi
What Kernel should I use to install FXP140 CM9?
I cant find the original Kernel on the thread.
http://forum.xda-developers.com/showthread.php?t=1410219
And by the way, What ROM are you using right now? I am kind of experiencing all the ROMs. I want a fast and stable ROM. (as everybody does )
I'm using MM CM 7.2 and it's great, try it and you'll see, just ZOOM on camera don't work, but eerything else is good and smooth.
Sent from my Flying MM X10 using xda app-developers app
J.Diogo said:
Hi
What Kernel should I use to install FXP140 CM9?
I cant find the original Kernel on the thread.
http://forum.xda-developers.com/showthread.php?t=1410219
And by the way, What ROM are you using right now? I am kind of experiencing all the ROMs. I want a fast and stable ROM. (as everybody does )
Click to expand...
Click to collapse
i'm currently on fxp140 cm9 and using fxp kernel, located here: https://docs.google.com/open?id=0BywsgCnPjbXpZEFDM2VHZEVhMFk
i would also recommend amin's kernel for cm9: http://forum.xda-developers.com/showthread.php?t=1867817
mrd7rs said:
i'm currently on fxp140 cm9 and using fxp kernel, located here: https://docs.google.com/open?id=0BywsgCnPjbXpZEFDM2VHZEVhMFk
i would also recommend amin's kernel for cm9: http://forum.xda-developers.com/showthread.php?t=1867817
Click to expand...
Click to collapse
Thanks man. But how can you get to these?
BTW do I need to flash google apps after the installation, like in cm 7?
J.Diogo said:
Thanks man. But how can you get to these?
BTW do I need to flash google apps after the installation, like in cm 7?
Click to expand...
Click to collapse
just click and download. yes you need to install google apps (gapps). latest version is gapps-ics-20120429-signed.zip, download from here: http://goo.im/gapps/
fxp install
hello can anywone tell me how install fxp140 cm9? is .zip file and I don't know to install
Best regards
do everyone here where i can get fxp140 kernel?
i found that FXP141 ROM and FXP140 kernel is stable, and the wi-fi working, so i was searching the kernel, and i didn't find it
thannks for your attention
project_arms said:
do everyone here where i can get fxp140 kernel?
i found that FXP141 ROM and FXP140 kernel is stable, and the wi-fi working, so i was searching the kernel, and i didn't find it
thannks for your attention
Click to expand...
Click to collapse
here is 141 kernel: https://www.box.com/s/3pw6eugwrve2cqeos5l6
Hi
So I've been trying to find a kernel that works with Supernexus 2.0 on my GT-I9300. Haven't found any, so that's why I'm asking from you, are there any kernels that I could flash to my GT-I9300 (aka Samsung Galaxy S3) running Supernexus 2.0 Android 4.2.2?
Ps. Overclockable prefered. Thanks
me too. Flashed the siyah 1.8.9 before I found out it doesn't support 4.2.2!
Been searching but can't seem to find any other kernels..
Anyone?
gijoe50000 said:
me too. Flashed the siyah 1.8.9 before I found out it doesn't support 4.2.2!
searching but can't seem to find any other kernels..
Anyone?
Click to expand...
Click to collapse
Siyah just goes to bootloop, it says it supports CM10.1 but it doesn't support SuperNexus 2 or CM10.1
Well I'm not a patient dude, so I'm now happy user of Carbon ROM 4.2.2 which has kernel that can be clocked to whopping 2,0Ghz!
Thanks for answering
hi , i have used for some days aokp, cm10.1 rom s with temasek kernel its compatible with stweak you can try it tell me if this work for you
http://forum.xda-developers.com/showpost.php?p=29339117&postcount=4
zenosteam said:
hi , i have used for some days aokp, cm10.1 rom s with temasek kernel its compatible with stweak you can try it tell me if this work for you
http://forum.xda-developers.com/showpost.php?p=29339117&postcount=4
Click to expand...
Click to collapse
I wanted to try it, but I can't find the download link anywhere from the page, just the source links >.< . Could you post the download link?
WannabeDeveloper said:
Siyah just goes to bootloop, it says it supports CM10.1 but it doesn't support SuperNexus 2 or CM10.1
Well I'm not a patient dude, so I'm now happy user of Carbon ROM 4.2.2 which has kernel that can be clocked to whopping 2,0Ghz!
Thanks for answering
Click to expand...
Click to collapse
Yea it supports CM 10.1 on 4.2.1, but not 4.2.2! I'm bootlooping at the moment!
hi , i have used for some days aokp, cm10.1 rom s with temasek kernel its compatible with stweak you can try it tell me if this work for you
http://forum.xda-developers.com/show...17&postcount=4
Click to expand...
Click to collapse
Thanks man,
I'll give it a go..
---------- Post added at 08:19 PM ---------- Previous post was at 07:50 PM ----------
WannabeDeveloper said:
I wanted to try it, but I can't find the download link anywhere from the page, just the source links >.< . Could you post the download link?
Click to expand...
Click to collapse
I was having the same trouble, that was only source. Finally found it though, working now
heres the link to the zip: http://temasek.hopto.org/?dir=Samsung Galaxy S3 - i9300/CM10.1/Temasek Kernel
enjoy guys
here it the linkk for the rom if you want nd it's wor on 4.2.2 rom's
http://forum.xda-developers.com/showthread.php?t=1797109&highlight=battery
New Kernel is working fine, but after installing, my WIFI tethering has stopped working. Just "error".
Ah well, back to the stock CM kernel I suppose..
You can use GokHanmoral's SiyahKernel on all Jelly Bean ROMs. It allows you to overclock your CPU to 1.8GHz and is butter smooth.
Hope I could help!
Lg
get the franco kernel updater app na..
Sent from my GT-I9300 using xda premium
Thanks for everyone who answered!
you can use GokHanmoral's SiyahKernel on all Jelly Bean ROMs. It allows you to overclock your CPU to 1.8GHz and is butter smooth.
Hope I could help!
Lg
Click to expand...
Click to collapse
It will bootloop on 4.2.2 roms :'(
You could try Google not all devs post on XDA .
jje
WannabeDeveloper said:
It will bootloop on 4.2.2 roms :'(
Click to expand...
Click to collapse
BTW, gokhanmoral updated his siyah kernel to 1.9.1
works now with the latest 4.2.2 roms
but not the samsung leaks
also there is a modded siyah kernel called "googy-max kernel"
this on is awesome and also rock-stable
not to mention the battery life and the governors
just google it up and flash it
if i helped, please hit the thanks button.
Hey
Recently i flashed Siyah Kernel Into my I777 runs on CM 10.1 Nightlies and when i reboot the device it was stuck on boot screen.
and i had to restore rom again but it had installed updated CWM Recovery updating my previous one. so i need to know how can i flash the Siyah kernel in a right way and right version of it.
Thanks
Looks like AJ has pulled his work. Try the STi kernel.
Butchr said:
Looks like AJ has pulled his work. Try the STi kernel.
Click to expand...
Click to collapse
Ok will it work for sure coz im fed up restoring rom again and again
Not sure about cm, but I have run it on Task's rom, and Pac rom. Worked nice for both of those so it should work fine for you.
rukeerox said:
Ok will it work for sure coz im fed up restoring rom again and again
Click to expand...
Click to collapse
I don't use CM but my understanding is you must use the CM kernel that is installed with it. Maybe you should go over to the General forum and post a question in the [Firmware][SGH-I777][JB][4.1.1] CyanogenMod 10 preview | USER THREAD. There should be no restrictions on posting in that thread.
creepyncrawly said:
I don't use CM but my understanding is you must use the CM kernel that is installed with it. Maybe you should go over to the General forum and post a question in the [Firmware][SGH-I777][JB][4.1.1] CyanogenMod 10 preview | USER THREAD. There should be no restrictions on posting in that thread.
Click to expand...
Click to collapse
Thanks for the Replies now im using Sti Kernel and its runs very smootly and lots of custom Govenors with it
Cheers
Glad that worked for you.
Hi.
I flashed a kernel on my device, but the wifi isn't working.
the turn on and searching, but don't find a wifi.
what i've done?
i flashed a bieltv cm7 kernel.
on stock rom.
haldsonsp said:
Hi.
I flashed a kernel on my device, but the wifi isn't working.
the turn on and searching, but don't find a wifi.
what i've done?
i flashed a bieltv cm7 kernel.
on stock rom.
Click to expand...
Click to collapse
you CAN`T use Bieltv.3 kernel on stock rom.of course it will boot but won`t work properly and read OP.
GingerBreadCookie said:
you CAN`T use Bieltv.3 kernel on stock rom.of course it will boot but won`t work properly and read OP.
Click to expand...
Click to collapse
=/
i flashed a stock rom.
all it's working!
haldsonsp said:
=/
i flashed a stock rom.
all it's working!
Click to expand...
Click to collapse
you can use Thunder Kernel,Nit interactive kernel,Rafael Baugis kernel,hell lock kernel on stock rom.
GingerBreadCookie said:
you can use Thunder Kernel,Nit interactive kernel,Rafael Baugis kernel,hell lock kernel on stock rom.
Click to expand...
Click to collapse
what is the best kernel without bug to stock rom?
and flasheable with cwm
haldsonsp said:
what is the best kernel without bug to stock rom?
and flasheable with cwm
Click to expand...
Click to collapse
Best kernel without bugs you want then it is stock kernel
There is nothing Best here
Hitesh2626 said:
Best kernel without bugs you want then it is stock kernel
There is nothing Best here
Click to expand...
Click to collapse
calm down man. u.u
but, thanks 4 ur help! =D
haldsonsp said:
calm down man. u.u
but, thanks 4 ur help! =D
Click to expand...
Click to collapse
Don't say thanks. Press it.
Sent from my GT-S5830i
please help, my phone don't have sound after stalling this rom.
the sound of spirit free worked but anyone sound work.
sorry my bad English.
version 2.1.4.1
Install again follow the instructions .
Basics new users read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts
what kernel are you using? tip: change the kernel
sriram231092 said:
what kernel are you using? tip: change the kernel
Click to expand...
Click to collapse
I'm using the kernel that coming with rom temasek.
malukp said:
I'm using the kernel that coming with rom temasek.
Click to expand...
Click to collapse
okay. try flashing these also:
DEVIL KERNEL
GOOGY-MAX KERNEL
thanks @sriram231092.. I install the googy-max kernel and work!
Sent from my GT-I9300 using Tapatalk 4 Beta