Are there any other differences between i9100 and i9100P models? Other than the NFC chip?
What about roms - is it safe to install roms for i9100 to i9100P device?
How about spare parts? Do they fit on i9100P?
xx77aBs said:
Are there any other differences between i9100 and i9100P models? Other than the NFC chip?
They are same hardware wise except that I9100p has 'NFC'
What about roms - is it safe to install roms for i9100 to i9100P device?
U can install I9100 roms on I9100P as long as they have NFC feature in them (if not also they will wrk but without NFC for u)
How about spare parts? Do they fit on i9100P?
its better to replace with I9100P spare parts,to avoid issue's
Click to expand...
Click to collapse
Hope its clear for u
Sun90 said:
Hope its clear for u
Click to expand...
Click to collapse
Yeah, thanks for a clear answer
I've searched i9100P display on ebay, but I can't find it. I need to replace my current display assembly because it's broken. Is it safe to buy display for i9100?
Thanks
xx77aBs said:
Yeah, thanks for a clear answer
I've searched i9100P display on ebay, but I can't find it. I need to replace my current display assembly because it's broken. Is it safe to buy display for i9100?
Thanks
Click to expand...
Click to collapse
it should fit in, but not 100% shure about that ma8, just get in touch with a nearest Samsung Service center and see
Sun90 said:
Hope its clear for u
Click to expand...
Click to collapse
Sun90 said:
it should fit in, but not 100% shure about that ma8, just get in touch with a nearest Samsung Service center and see
Click to expand...
Click to collapse
Ok, thanks. I'll wait a little, maybe someone was changing the screen on i9100P and knows if i9100 screen works or not
xx77aBs said:
Ok, thanks. I'll wait a little, maybe someone was changing the screen on i9100P and knows if i9100 screen works or not
Click to expand...
Click to collapse
I9100's works and fits perfectly since I9100P only changes on the chip that's included in the battery.
I have a I9100 screen on my I9100P
efalgae said:
I9100's works and fits perfectly since I9100P only changes on the chip that's included in the battery.
I have a I9100 screen on my I9100P
Click to expand...
Click to collapse
Great, thanks !!
Related
Hi guys, I recently took a sgs2 NFC technology. Can I change the rom with a criskelo as well as with the normal?
thank you very much
cukisan said:
Hi guys, I recently took a sgs2 NFC technology. Can I change the rom with a criskelo as well as with the normal?
thank you very much
Click to expand...
Click to collapse
Sorry I have no idea what you are asking here, you took an NFC technology????
Lol... I agree... what does that mean...?? I would also like to take nfc technology on my s2 if possible since mine isn't the Korean version...
Or maybe he is saying he got the Korean version... hmmmmm...
Sent from my Galaxy SII
I think he is saying that he got NFC version of S2 and asking for ROM compatibility.
i was thinking about whether to wait for NFC to hit all of SG2, or maybe getting one from the UK (had to wait for a while, since it was rumored they'll get there eventually) ... but eventually decided that even though it's a nice sounding feature, i can probably live without it, and just got mine
anyways, assuming you have a korean phone with NFC support, you think it won't work unless you have a ROM built specifically with that support?
i guess it'll take most roms out there out of the question ...
Sorry but maybe I expressed myself badly ... I bought the new i9100p which is the version with the NFC chip to shop (here in Italy this technology isn't coming soon ..: Mad. I wanted to know if you think the rom for the i9100 normal are compatible. until a short time ago I had the regular version and with the criskelo I was fine ..
I was going to try to get the nfc version myself but didn't due to this particular confusion whether its compatible or not...
Some people said that with the nfc version all it is, is the nfc chip which is installed in the back cover and the battery but the rest of the phone is essentially the same... if that's the case it should probably work... but again I can't say for sure... the model is still i9100, just adding the P... I think it should work... but I would suggest you maybe ask in the respective rom thread or maybe PM criselko himself and see what he says...
Sent from my GT-I9100 using Tapatalk
This is a NFC enabler from fonzi09 that, well, enables NFC from your NFC-enabled Galaxy S2 (try saying that 5x quickly..). Note that YOUR GALAXY S2 NEEDS TO HAVE HARDWARE NFC SUPPORT, ergo: Your S2 must have a NFC chip inside, whether its a SIM mod, SD mod, or preinstalled. Almost all custom ROMs remove the perms and libs for NFC and this just puts them back where they belong. Capiche? Yea? Good.
All credits go to fonzi09 for this wonderful mod which I'm unfortunately not able to enjoy because I have a UK Orange Galaxy S2...
For those who have a i9100 you don't have NFC chip inside. You need Orange France's i9100 or i9100p for this to work. For those who still don't understand, watch this: http://www.youtube.com/watch?v=JmvCpR45LKA&hd=1
reserved 2222222222
reserved 33333333333333333
After this mod z device test shows that nfc exist. But when in setting I try to enable nfc it just greyed out
Sent from my GT-I9100 using Tapatalk
Monu123 said:
After this mod z device test shows that nfc exist. But when in setting I try to enable nfc it just greyed out
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Which ROM are you using?
Nathan
Same problem but I'm using CheckRom.
Are you both sure you have the i9100P version with NFC? I also had this issue earlier on, its been a long afternoon but I'm sure it was solved by using the libpn544_fw.so from my original orange build.
Nathan
Hey guys I had a question I have asked before but noone seemed to have an answer... maybe you guys can... I have a i9100 and it didn't come with any nfc on it I believe... like the battery has it written on it etc... this doesn't...
so my question is, does anyone know if its possible to add nfc to this phone somehow...?? By maybe getting a nfc enabled battery or something...??
DrunkFuX666 said:
Hey guys I had a question I have asked before but noone seemed to have an answer... maybe you guys can... I have a i9100 and it didn't come with any nfc on it I believe... like the battery has it written on it etc... this doesn't...
so my question is, does anyone know if its possible to add nfc to this phone somehow...?? By maybe getting a nfc enabled battery or something...??
Click to expand...
Click to collapse
I think we need someone to be brave and try it!
Nathan
Tried this on my SG2 and whilst the option is there, when I tap to activate it greys out which sadly means that my version does not have the NFC chip. it's a shame but never mind.
Same here build date october 2011
Sent from my GT-I9100 using XDA App
This mod works pretty well !
I own a I9100P with NFC chip^^!
Thanks for sharing !
fonzi09 said:
I think we need someone to be brave and try it!
Nathan
Click to expand...
Click to collapse
You need those microSD with NFC enabled eg the one that Visa is still rolling out in beta, or something similar. Or a SIM with NFC enabled.
Meg4mi said:
This mod works pretty well !
I own a I9100P with NFC chip^^!
Thanks for sharing !
Click to expand...
Click to collapse
So this is working well for i9100P owners? How many have had success?
Nathan
So if I have an international sg2 that doesn't have nfc by standard, this will still work if I get the SD card with nfc??
Sent from my GT-I9100 using XDA App
If I get a phone with NFC is this what i can do with my PHONE
http://www.youtube.com/watch?v=OolP9gNLP6c
I can do that with my mastercard, or is NFC something different.
arikyeo said:
You need those microSD with NFC enabled eg the one that Visa is still rolling out in beta, or something similar. Or a SIM with NFC enabled.
Click to expand...
Click to collapse
I read about these nfc Sims but only one carrier seems to have it... hence pretty much not accessible...
Didn't come across these micro SD things... any links cost etc...??
Guess ill Google it...
Sent from my Galaxy SII
Kingybear said:
If I get a phone with NFC is this what i can do with my PHONE
http://www.youtube.com/watch?v=OolP9gNLP6c
I can do that with my mastercard, or is NFC something different.
Click to expand...
Click to collapse
Yep that's it! Using an app called Google Wallet. It's not been rolled out to the S2 yet, although there has been some success through side loading! I'll spend a few hours trying to get it up and running after Christmas
Nathan
arikyeo said:
This is a NFC enabler from fonzi09 that, well, enables NFC from your NFC-enabled Galaxy S2 (try saying that 5x quickly..). Note that YOUR GALAXY S2 NEEDS TO HAVE HARDWARE NFC SUPPORT, ergo: Your S2 must have a NFC chip inside, whether its a SIM mod, SD mod, or preinstalled. Almost all custom ROMs remove the perms and libs for NFC and this just puts them back where they belong. Capiche? Yea? Good.
All credits go to fonzi09 for this wonderful mod which I'm unfortunately not able to enjoy because I have a UK Orange Galaxy S2...
Click to expand...
Click to collapse
Fully working on kk5 m250s.ty
Sent from my GT-I9100 using xda premium
Good day to everyone.
I just recently bought my SGS3 from a local network provider called Telecom.
When i check the phone's version, it says, "Samsung Galaxy I9300T".
Definitely it's not the International Version so i'm wondering if it is possible to be rooted in any way and - HOW?
Other infos if needed are the following:
-Model number: GT-I9300T
-Android version: 4.0.4
-Baseband: I9300TDULE6
I'm asking before doing anything because i'm also an SGS2 user, and there's a hell of a difference between GT-I9100
and GT-I9100G. From kernel to ROMs, even the themes, in fact, a separate title was made just to compensate the need
of I9100G users.
Anyone's help would be really appreciated.
Thanks.
What are its specifics?
It is still the international version, don't worry, enjoy!!
Totòòò said:
What are its specifics?
Click to expand...
Click to collapse
Wadelo said:
It is still the international version, don't worry, enjoy!!
Click to expand...
Click to collapse
Thanks for the reply.
Actually, there is no other specific. But just to complete the info i will edit the first post.
Looks like we got the Australian version, from what I've read all their galaxy 's have had the T on them.... did our other versions of the S1 & S2 have the T on them ?
ThreeTwoBravo said:
Looks like we got the Australian version, from what I've read all their galaxy 's have had the T on them.... did our other versions of the S1 & S2 have the T on them ?
Click to expand...
Click to collapse
Not aware mate since i got my s2 form **** Smith. But probably yeah.
Regarding the Australian version, at least the possibility of getting my phone rooted increased as there are quite few developers from Aus and Au.
Maybe i just need to wait for a little while.
Same GT-i9300:
http://pdadb.net/index.php?m=specs&id=3549&c=telstra_samsung_gt-i9300t_galaxy_s_iii
The i9300t has a modem optimized for the 850mhz network. This is used by Telstra and Vodafone in Australia.
I have the galaxy s 2 i9100t model and used the rom for the i9100 (non t model) fine. I assume this will be the same for the s3
Sent from my Transformer Prime TF201 using Tapatalk 2
You have the international you can flash everythink!
It is Blue or white???
alexanter the great said:
You have the international you can flash everythink!
It is Blue or white???
Click to expand...
Click to collapse
Have the ability to flash any Rom, but still better to flash a 't' modem/radio after Rom if in Aust and with Telstra or Vodafone
Sent from my HTC One X using Tapatalk 2
Solder Jumpers!
For those of you who have the "GT-I9300T" (or any other non-pure-I9300),
please open up your back cover and confirm the solder jumper settings
as shown in the picture shown in THIS post.
Thanks!
E:V:A said:
For those of you who have the "GT-I9300T" (or any other non-pure-I9300),
please open up your back cover and confirm the solder jumper settings
as shown in the picture shown in THIS post.
Thanks!
Click to expand...
Click to collapse
Thanks for that mate but i will not risk opening my phone as it will totally lose my warranty.
By the way, it's quite interesting.
E:V:A said:
For those of you who have the "GT-I9300T" (or any other non-pure-I9300),
please open up your back cover and confirm the solder jumper settings
as shown in the picture shown in THIS post.
Thanks!
Click to expand...
Click to collapse
Have taken apart a I9300T and a I9300. On the T model the jumper is on the AU pads, on the I9300 the EU pads are soldered.
my friend have a samsung s3 clone from korea...all function are 98% same with the original version of samsung s3...so i was wondering if a clone device can be rooted or not..
Rd Ellan Koyoe said:
my friend have a samsung s3 clone from korea...all function are 98% same with the original version of samsung s3...so i was wondering if a clone device can be rooted or not..
Click to expand...
Click to collapse
Depends, what hardware does it have? Does it run on the real s3 firmware?
baggah said:
Depends, what hardware does it have? Does it run on the real s3 firmware?
Click to expand...
Click to collapse
not sure...will check it later and let you know about it
I'm positive the clones have completely different hardware than the real S3s.
Lancerz said:
I'm positive the clones have completely different hardware than the real S3s.
Click to expand...
Click to collapse
Yeah and it's defenetly very easy to Root. Just Google you'll find alot of them
Dear XDA members,
First of all, I want to apologize for my bad English...
I have an S3 with a broken screen. My phone gets on, make noises, but I have no picture.
My wife has an old S2, it is possible to connect my S3 motherboard to the display of the S2? The connectors look the same, but does it works?
I know that the resolutions of the S2 and S3 are different, but all I need to the is to make a backup. (USB port is also broken )
Thanks.
Br33ze
Br33z3 said:
Dear XDA members,
First of all, I want to apologize for my bad English...
I have an S3 with a broken screen. My phone gets on, make noises, but I have no picture.
My wife has an old S2, it is possible to connect my S3 motherboard to the display of the S2? The connectors look the same, but does it works?
I know that the resolutions of the S2 and S3 are different, but all I need to the is to make a backup. (USB port is also broken )
Thanks.
Br33ze
Click to expand...
Click to collapse
Pretty sure that would just fry the display of the s2, because it is different hardware than the s3.
Thanks for the reply...
The story continues to find a S3.
Br33z3 said:
Thanks for the reply...
The story continues to find a S3.
Click to expand...
Click to collapse
Which country are you located in?
S4??
Darke5tShad0w said:
Which country are you located in?
Click to expand...
Click to collapse
In the Netherlands!
Sorry to post in this older thread..
But do you guys know if it's posible to connect a S4 to my S3 motherboard??
Thx.
Br33z3
Br33z3 said:
In the Netherlands!
Sorry to post in this older thread..
But do you guys know if it's posible to connect a S4 to my S3 motherboard??
Thx.
Br33z3
Click to expand...
Click to collapse
Sorry I can not help you the way I had in mind.
With your original problem I would of sent you an old s3 complete screen assembly I have to either use to copy data or use permanently.
I swapped it out because of a bad glass replacement done by a local shop but it still works and functions...most of the time. Sometimes the touch doesn't work for a few seconds but the Netherlands is to far away.
Sorry for raising hope
Darke5tShad0w said:
Sorry I can not help you the way I had in mind.
With your original problem I would of sent you an old s3 complete screen assembly I have to either use to copy data or use permanently.
I swapped it out because of a bad glass replacement done by a local shop but it still works and functions...most of the time. Sometimes the touch doesn't work for a few seconds but the Netherlands is to far away.
Sorry for raising hope
Click to expand...
Click to collapse
Thanks for your help and your offer.
I can borrow a S4 or Note3, is it possible to connect one of those to my S3??
Thanks guys.
I think this won't work pretty well. I know that it is the same type of display: Super AMOLED capacitive TOUCHSCREEN, 16M colors, but the site and resolution is different. And the next question is, if the connectors really fit in!