Trying to debrand using NCS yet it says software unupgradable and the start button is greyed out. Iv downloaded the generic firmware and
renamed the files. Its detected ok the old software as Software Version 1750.0823.8852.12430 and the new as 1750.0805.8773.12220. On the right under basic info the software status is red and says unupgradable. What am I doing wrong many thanks.
Related
My father in law in visiting has an X10i (on 1.6) that he purchased from the Middle East. I've been trying to update through SEUS and no luck; it keeps saying that I have the latest software.
Questions:
1. Is the 2.1 update available for all X10i? or not yet all?
2. How can I check the phones region?
3. Should I update using one of the decrypted roms in the forum? if yes then can someone who's done recommend one please?
Thank you so much in advance.
first on the lock screen press ( Menu, Back, back, menu, back, menu, menu, back )
then service info>Software info>
then you can see which software you got in your phone, if it says World Generic then it means that you should get the update.
My X10i is from the Middle East and my region was world generic, so I managed to get the update.
Tip: sometimes the SEUS says that you have the latest software (1.6) but when clicking on re-install it will install the device to 2.1 update
Thanks for the response. I did the the menu back thing, and it shows that my software is "Generic" not "world generic". I did a search for update on SEUS and SE PC Companion and still nothing, then I did a repair and it downloaded 1.6 again.
How can I update to 2.1?
Anyone? this is my soft v 1227-4612_r2ba026 generic
I've got the same code as you and have had no luck with SEUS or PC Companion.
I have repaired or installed with both Friday and Saturday and I just get 1.6 re-installed.
i have flashed my at&t x10a into Nordic generic and i still cant get it to update to 2.1
I am in Virginia, US. Software Update still does not find Android 2.1. I am still on 1.6.
Sent from my X10i using XDA App
hi all im looking for this firmware its from Puerto Rico ive updated the phone to 2.3.6 works fine but screen go off and wifi randomly. also i have another one is there a way i could extract its firmware so i could just reflash it?
Sure you can.
First of all take the "another one" and digit this codes at dial:
*2767*4387264636# It gives you the Product Code (write it down)
*#*#1234#*#* It gives you the Actual version
*#*#44336#*#* It gives you the Initial version
Post the results and I will give you the configuration to use with "Check Fus Downloader"
You can get any frimware from Kies knowing this values for any region/operator but only the latest version of the oficial firmware.
Good luck.
I have been trying to update since new firmware was released,im on O2 UK.
Before it use to say no update found but just recently im getting this error when clicking on check for updates
failed to update firmware due to network or server problem.Try software update via settings > Software Update > Update or try using PC Kies later
Click to expand...
Click to collapse
I have tried connecting to Kies but says im on latest firmware
PDA:LE8/PHONE:LE5/CSC:LE5 (O2U)
Has anyone on O2 got the new firmware yet ?
Anyone ? still wont let me update on O2
my galaxy s2 is GT-I9100. i saw a jellybean update is on kies so i did the update. However after i did the 4.2.1 update, i found out my CSC was changed! before the jellybean update, it was TGY(HongKong) after the updates, it changed to XSP(Singapore)...WTF.............
Also i cannot change the CSC anymore. i tried using CSC select to change my CSC, but it says "com.android.Precnfig not found on your device. Manual mode..." not only in phone, Kies also says my device is unable to do S/W upgrade or something.
BTW i haven't done any rooting. i don't know why after i did the jellybean update, it shows these kinds of problems.
please give me some solution or any feedback!
re-flash.
Sent from the little guy
changing csc code in jellybean requires root access.
i rooted and tried csc select but there is no csc to select from.
anybody know why?
Did you solve this problem?
Hi guys,
I'm normally pretty good at finding answers but I've been searching for a few days and haven't found a solution to my problem.
I have a Rogers (Canada) SGP621. In the *#*#7378423#*#* menu, I see:
Customization Version: 1291-0899_R11C (This aligns with what I expect for this device and what is in my build.prop)
Active Customization: 1290-7248_R10C (Can't find any info anywhere about what variant this is for).
When I connect the device to Sony Companion and try to recovery the device, I get "Error code: UELoginAuthenticationFailed". After some digging around, I found one guy complaining on Sony forums that he can't update his device and that his Customization and Active Customization versions are different. The only response he got back was "you must have flashed something strange, this shouldn't happen."
I performed a full FTF flash of my device to the latest 1291-0899_R11C Rogers firmware, which is 23.4.A.1.200 / R11C, as per XperiFirm, however after everything boots up I still have this 1290-7248_R10C customization active.
Does anybody have a solution to fix my problem and get my active customization to align with my device? Or perhaps have any of you run into this problem in the past?
I've tried using the "Reset Customization" in the *#*#7378423#*#* menu with no luck. I've tried a factory reset with or without my SIM in the device and also no luck.
EDIT: Little more info, if I connect to Sony Companion with device off while holding down volume down (Flash mode), I get a different error when trying to recover device: "Error code: UEGetPhoneInfoMissingInfo
SGP621 #### 1291-0899 R11C 23.4.A.1.200"
Thanks in advance!