Hi,
I've been running a custom 4.1 firmware for a long time now, and i'd like to try the stock firmware for a while now.
I've downloaded the old gingerbread rom I9100BUKJ3_I9100SIMKI2_I9100BUKI1_HOME.tar.md5 that my phone had from sammobile. But I still need to find the old stock kernel. After that I can flash it and update with kies.
I've found it only here, but the link is broken.
BUKJ3:http://www.multiupload.com/3Z8GN7D4YH
Firmware info: PDA:BUKJ3| PHONE:BUKI1| CSC:SIMKI2
BUKJ3 Stock Kernel: http://www.multiupload.com/DLLNZST33J
Password: [email protected]
Click to expand...
Click to collapse
Can someone help me with this?
The firmware *should* come with a kernel......I flashed back to stock (with mobile odin) and the stock kernel/stock recovery was installed from the firmware package.
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Related
Hello,
I have on my phone SG2 with ICS 4.0.3.
Yesterday i have a lot issues...reboot,f/c,crashing on camera and other!
I searched on the forum and i downloaded the stock firmware and kernel for my country and carrier.
Firmware info: PDA:BOKG2|PHONE:BOKG1|CSC:COSKF1
BOKG2 Stock Kernel
i flashed both and everything is ok!
Today i went to flash again CWM but when i flash it stuck on boot screen.
Tried 4.0.1.5 , 4.0.0.2 , 5.0.2.3 ....nothing...
Sometimes i get into cwm but doesn't recognized my ext-sd to flash a custom rom
only when i am flashing the BOKG2 Stock Kernel works!
What am i doing wrong??? everything???
tomklm said:
Hello,
I have on my phone SG2 with ICS 4.0.3.
Yesterday i have a lot issues...reboot,f/c,crashing on camera and other!
I searched on the forum and i downloaded the stock firmware and kernel for my country and carrier.
Firmware info: PDA:BOKG2|PHONE:BOKG1|CSC:COSKF1
BOKG2 Stock Kernel
i flashed both and everything is ok!
Today i went to flash again CWM but when i flash it stuck on boot screen.
Tried 4.0.1.5 , 4.0.0.2 , 5.0.2.3 ....nothing...
Sometimes i get into cwm but doesn't recognized my ext-sd to flash a custom rom
only when i am flashing the BOKG2 Stock Kernel works!
What am i doing wrong??? everything???
Click to expand...
Click to collapse
Try to flash with ODIN first if you cannot flash by CWM!
I had same problem . I flashed stock firmware and then flashed siyah kernel through odin and my phone started . Then i rebooted into recovery mode and flashed custom rom.
And also do wipe before flashing custom firmware
Sent from my GT-I9100 using Tapatalk
hi
all
i have used ICS 4.0.3 LPB with letest CWM & no any issue
used letest CWM with ICS 4.x
abhi chahal said:
I had same problem . I flashed stock firmware and then flashed siyah kernel through odin and my phone started . Then i rebooted into recovery mode and flashed custom rom.
And also do wipe before flashing custom firmware
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Thanks... This resolve my problem
Lords of Firmware and Gods of Root, need you attention!
Hi. I checked xda forum and cannot find full answer on my question.
Please, help me, if you can.
I recently bought sgs2 for me and my wife.
My wife use stock firmware and updating by OTA.
I have stock firmware with CF rooted kernel
When we bought SGS2 (From Poland) with latest GB stock firware.
We together updated by OTA to stock ([email protected] #3 IML74K.XXLPQ) firmware.
When I root my SGS2 with CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5 using Odin.
In 6 april we were reminded of a new version by OTA and I updated wife's phone. Now her firmware version is [email protected] #3 IML74K.XXLPS.
I want update my phone too, I read the posts about CWM and looked at thread "[02.04.2012][CF-Root 5.4] K/EFGHIJKLP*, LA2/4, LP1/2/6/B/H/J/Q/7/3/S - su+bb+CWM4/5" and understand how to do:
1)Download rooted kernel with name like CF-Root-SGS2_XX_XEO_LPS, but I cannot find this kernel - only CF-Root-SGS2_XX_OXA_LPS-v5.4-CWM5.zip available.
Can I use this kernel or wait for CF-Root-SGS2_XX_XEO_LPS.
What difference in kernel between OXA (Maybe UK??) and XEO (Poland)?
2) Download stock kernel from samsung I9100XXLPS_I9100OXALPS_I9100XXLPS_HOME. I've done it.
3) Place to external_sd/firmware rooted kernel and stock firmware.
4) Using CWM App flash CF kernel, when flash stock firmware without kernal and wipe dalvic cache
Am I right? I not loose my apps and setting?
if I update my phone (with CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5) by OTA I loose root and CWM Recovery, but later can install CF root using Odin?
YndTruD said:
Lords of Firmware and Gods of Root, need you attention!
Hi. I checked xda forum and cannot find full answer on my question.
Please, help me, if you can.
I recently bought sgs2 for me and my wife.
My wife use stock firmware and updating by OTA.
I have stock firmware with CF rooted kernel
When we bought SGS2 (From Poland) with latest GB stock firware.
We together updated by OTA to stock ([email protected] #3 IML74K.XXLPQ) firmware.
When I root my SGS2 with CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5 using Odin.
In 6 april we were reminded of a new version by OTA and I updated wife's phone. Now her firmware version is [email protected] #3 IML74K.XXLPS.
I want update my phone too, I read the posts about CWM and looked at thread "[02.04.2012][CF-Root 5.4] K/EFGHIJKLP*, LA2/4, LP1/2/6/B/H/J/Q/7/3/S - su+bb+CWM4/5" and understand how to do:
1)Download rooted kernel with name like CF-Root-SGS2_XX_XEO_LPS, but I cannot find this kernel - only CF-Root-SGS2_XX_OXA_LPS-v5.4-CWM5.zip available.
Can I use this kernel or wait for CF-Root-SGS2_XX_XEO_LPS.
What difference in kernel between OXA (Maybe UK??) and XEO (Poland)?
2) Download stock kernel from samsung I9100XXLPS_I9100OXALPS_I9100XXLPS_HOME. I've done it.
3) Place to external_sd/firmware rooted kernel and stock firmware.
4) Using CWM App flash CF kernel, when flash stock firmware without kernal and wipe dalvic cache
Am I right? I not loose my apps and setting?
if I update my phone (with CF-Root-SGS2_XX_XEO_LPQ-PROPER-v5.4-CWM5) by OTA I loose root and CWM Recovery, but later can install CF root using Odin?
Click to expand...
Click to collapse
If you are already rooted and already downloaded stock firmware, why not try mobile odin to update. that way you won't loose root
Hey all.
After reading about the brickbug and failing the eMMC test, im a little confused as to the safest way to root and install a custom rom.
I am currently runnning ICS 4.0.3 with I9100TDULPB kernel on an aussie vodafone branded device.
Do i simply use odin to flash a stock samsung JB ROM, then flash Philz or Siyah JB kernel for root+cwm, then custom rom install via cwm?
I would also like to retain the option of flashing my carrier stock image incase of warranty purposes.
Cheers
Do i simply use odin to flash a stock samsung JB ROM, then flash Philz or Siyah JB kernel for root+cwm, then custom rom install via cwm?
Click to expand...
Click to collapse
Exactly !
PD: Remember to follow the installation instructions on the rom thread, otherwise u'll end in nasty bootloops
Thanks for the quick reply
So this will ultimately allow me to odin flash back to the stock ICS Vodafone Branded ROM later down the track?
Cheers.
strokemesilly said:
Thanks for the quick reply
So this will ultimately allow me to odin flash back to the stock ICS Vodafone Branded ROM later down the track?
Cheers.
Click to expand...
Click to collapse
yes, whenever u want to go back to complete stock, u just download ur stock firmware and flash it through odin
Awseome!
Thanks Poroto
Hi guys, where could i find a official stock ROM 4.1.2 to flash via CWM or Philz. just a stock rom. (ive read some thread, but they are flashing thru ODIN) im planning back to put my phone in its original state. thanks.
lestervai said:
Hi guys, where could i find a official stock ROM 4.1.2 to flash via CWM or Philz. just a stock rom. (ive read some thread, but they are flashing thru ODIN) im planning back to put my phone in its original state. thanks.
Click to expand...
Click to collapse
Well if you want to flash a official stock rom then you can only find them on sammobile.com and only way to flash it from odin. After that you can use Philz to install CWM if you want.
Hope it helps
Sent from my iPhone using Tapatalk
thick ehirner
There are also some that you can flash via CWM. If you are rooted.
http://forum.xda-developers.com/showthread.php?t=2139353
If I'm on rooted stock ROM with custom kernel, what's the best way to update to 5.1.1 without a wipe?
odin
andromeda1968 said:
odin
Click to expand...
Click to collapse
I ended up using the Smart Switch to revert to stock. Stock apparently doesn't have an update for me, so I tried to Odin the latest XEU version. However Odin won't see my phone