Anyone have a stock firmware zip that can be flashed in stock recovery? I messed up some system files and can't get back into android. Thanks to anyone in advance.
Here you have it: S6000_A422_001_006_130703_CN_WiFi.
thanks
Is there any way to get clockwork mod recovery on the s6000?
bgcngm said:
Here you have it: S6000_A422_001_006_130703_CN_WiFi.
Click to expand...
Click to collapse
Sure, grab the attached file. Compiled just yesterday.
More than just saying thanks, hit "Thanks" button.
Errors
for some reason I cant get this to flash to the s6000. did you have any scucess? I used the scatter file provided but am getting the following error when I try to flash. any ideas?
bgcngm said:
Sure, grab the attached file. Compiled just yesterday.
More than just saying thanks, hit "Thanks" button.
Click to expand...
Click to collapse
The error message is clear: use Firmware Upgrade option on SP Flash Tool. For that, you have to load all partitions and that should not be a problem taking into consideration that I've already shared the link to the full package.
thanks but
Thank you for the help but its really not working out as easy as that. I am getting checksum errors now too. If you think of anything else it might be please let me know.
Isnt there a way to flash this in fastboot? I tired but it wont let me but was wondering if it was because the bootloader is locked?
bgcngm said:
The error message is clear: use Firmware Upgrade option on SP Flash Tool. For that, you have to load all partitions and that should not be a problem taking into consideration that I've already shared the link to the full package.
Click to expand...
Click to collapse
Just delete checksums.ini file and proceed with flashing.
So just so I am clear on what I need to do.
Download stock firware from link you provided
Extract image to drive
Replace stock recovery.img with CWM version
Replace scatter file with version from CWM download?
Delete checsum.ini from MTK tools folder
Load CWM scatter file
Check DA/DL box in SP tool
Click Firmware upgrade button
If this is correct then it doesnt work. Or perhaps I am leaving out a step. Thanks for your help.
bgcngm said:
Just delete checksums.ini file and proceed with flashing.
Click to expand...
Click to collapse
Just out of curiosity, why are you quoting my posts? Is it really necessary?
Anyway, the process you mentioned is correct, but perhaps you're using an old version of SP Flash Tool. Note that the scatter file that goes along with CWM recovery is the original, taken from the stock firmware package.
I have the latest SP flash tool. Does not work. Thanks for the help anyway.
The latest? Which version is it?
Thank you sir for all of your help. I did get it working finally. If you don't mind me asking, how did you compile the cwm? Using the online builder? Any chance you could compile a US version ?
Hey, would you mind giving me a little guidance on how to build the US version of this CWM recovery? It would be greatly appreciated... you have no idea...
I have compiled it from sources, not using the builder as it is not totally compatible with MTK devices. Anyway, what do you mean with "US version"?
Also, do you mind saying how you get it working? It may be useful for others. Let me know the SP Flash Tool version you've used.
I'll post the sp version. What I mean by US is that I had received a copy of the US firmware (a US version of the CN you posted) but when I tried to use the CWM you compiled with it, it did not work. I am in the US so running a China firmware is not optimal, but is OK I just had to side load Google apps and change the language.
It seems you forgot to tell which version you've used. Also, if you know where to find the US firmware please let me know.
US firmware
Hi All, any news on US firmware ?
Hi everyone.
I have a 4gb version without 3g.
Bought it in China. Tried to use russian ROM but it was corrupted, so now I need some ROM to make tablet work again.
I tried ROM from this thread, but SP flash tool showed a mistake that it's not enough memory. So, now my tablet is a brick. Where can I find another firmware?
I think that this is want you want / need: S6000_A422_001_005_130524_CN4_WiFi.
Related
Hey! I am having problem flashing the OTA zip (LRX21L-->LRX21R). It simply wont let me sideload the .zip file because my device can't be found after i reboot to the bootloader. Can anyone please help me with this?
My device has an unlocked bootloader and is rooted using Chainfires first root for the nexus 9. Thanks in advance!
acceh said:
Hey! I am having problem flashing the OTA zip (LRX21L-->LRX21R). It simply wont let me sideload the .zip file because my device can't be found after i reboot to the bootloader. Can anyone please help me with this?
My device has an unlocked bootloader and is rooted using Chainfires first root for the nexus 9. Thanks in advance!
Click to expand...
Click to collapse
Flash the 21l boot.img in fastboot. Then try the ota. Chain fire modified the boot image and that's why it isn't working
Sent from my Nexus 9 using XDA Free mobile app
Where do i get that 21l img file? And how to flash if fastboot is not recognized? I have twrp installed, could someone provide a flashable zip? Thanks
GeneralSmart said:
Where do i get that 21l img file? And how to flash if fastboot is not recognized? I have twrp installed, could someone provide a flashable zip? Thanks
Click to expand...
Click to collapse
Yeah...., I could go with this too, actually. I had pretty much everything from the board loaded. Including @Chainfire 's recov. I then later attempted to update the *poluza rom parts. It was failing any which way I tried in or out of twrp. Unfortunately, I am not much of a fastboot user, nor twrp.
I thought that maybe it had something to do with this updated vendor img. By the time I was done I had reformatted several times and started from scratch not leaving out steps. As far as I know. With just these images and no device trees nor a proper updater script, there is no way to tell really.
Currently and for a few days, it's been down to bare metal, and only a fastboot to look at. lol
I can't even seem to make a new factory image flash.
Never since my first android have I been this lost frankly.....
Maybe they have them now, I will look but it would also be helpful if the guys used a bit of ......'if.....then......' in their 'OP's'
"If you are using the included recovery, then......"
"If you are using this recovery then do......."
"If you wanted to use @Chainfire s recovery, then simply paste it......."
etc.
Could anyone possibly help and provide a way to update??? I unlocked bootloader and I am rooted, but now I want to have a working way to update....ANY HELP??
I found a solution: check out the video and download his tool...he did a great job there and it worked like a charm for me!!!!!!!!!!!!!!!!!!!!!!!!!!
https://www.youtube.com/watch?v=bsU1r6wKMiA
its the tool on the second link under the video...around 750 MB sized
So here's the thing, first off this Tablet as great as it is..seems like a ghost of an existence in the android community.
Anyways please please anyone at all any suggestions, I've tried numerous things to get out of this boot loop... So what happened is I ended up updating this device with Asus latest zip file they said to manually update with for Marshmellow
I've tried to re-install the zip file again using the IntelAndroid-FBRL-07-24-2015, to which now doesn't work nor does ADB Fastboot, it recognizes the device.. but now all commands pretty much fail... I don't know what else to do with this.
I did however installed the Asus Flash Recovery Program, I just cannot for the life of me find what file to use to re-flash this. Anyone please ANY SUGGESTIONS
If anyone at all has access or knows a working link for ZenPad Recovery files or raw image files.. I haven't been able to see if Asus Flash Recovery can help.
bert_747 said:
So here's the thing, first off this Tablet as great as it is..seems like a ghost of an existence in the android community.
Anyways please please anyone at all any suggestions, I've tried numerous things to get out of this boot loop... So what happened is I ended up updating this device with Asus latest zip file they said to manually update with for Marshmellow
I've tried to re-install the zip file again using the IntelAndroid-FBRL-07-24-2015, to which now doesn't work nor does ADB Fastboot, it recognizes the device.. but now all commands pretty much fail... I don't know what else to do with this.
I did however installed the Asus Flash Recovery Program, I just cannot for the life of me find what file to use to re-flash this. Anyone please ANY SUGGESTIONS
If anyone at all has access or knows a working link for ZenPad Recovery files or raw image files.. I haven't been able to see if Asus Flash Recovery can help.
Click to expand...
Click to collapse
The same thing happened to me yesterday. I tried the Asus Flash Recovery Program and found a raw file that seemed to be the right one. After flashing the tabled remained stuck on a spinning logo, however a hard reset in recovery solved that. My tablet is now back up and running.
The RAW image:
https://mega.nz/#!S5hkyIgA
Hope you get it working again
pkemeling said:
The same thing happened to me yesterday. I've been trying to un-brick my ZenPad, but with no luck so far. I tried the Asus Flash Recovery Program and found a raw file that seemed to be the right one. After flashing the tabled remained stuck on a spinning logo, however a hard reset in recovery solved that. My tablet is now back up and running.
The RAW image:
https://mega.nz/#!S5hkyIgA
Hope you get it working again
Click to expand...
Click to collapse
Wow thank you so much sadly I cannot download the raw you sent me says I need a Decryption Key before I can download? Do you know that key? Please Many thanks!!!
bert_747 said:
Wow thank you so much sadly I cannot download the raw you sent me says I need a Decryption Key before I can download? Do you know that key? Please Many thanks!!!
Click to expand...
Click to collapse
AH, yeah, wrong link. Try this one
https://mega.nz/#!S5hkyIgA!2Twg37uNswnFWb0-oTvLHxwijf7GwnpGpicEVhBt1t0
pkemeling said:
AH, yeah, wrong link. Try this one
https://mega.nz/#!S5hkyIgA!2Twg37uNswnFWb0-oTvLHxwijf7GwnpGpicEVhBt1t0
Click to expand...
Click to collapse
Downloading I'll keep posted for results thank you again so much!!! I hope this works for me as well.
pkemeling said:
AH, yeah, wrong link. Try this one
https://mega.nz/#!S5hkyIgA!2Twg37uNswnFWb0-oTvLHxwijf7GwnpGpicEVhBt1t0
Click to expand...
Click to collapse
Can you tell me what version of Asus Flash Tool you were using? I'm trying to us the 1.0.014 but alll it lets me use is a zip file. I've seen videos people using 1.0 and pulling up a choice between zip file or raw files.
If you can let me know that would be great and thanks again for your help!
bert_747 said:
Can you tell me what version of Asus Flash Tool you were using? I'm trying to us the 1.0.014 but alll it lets me use is a zip file. I've seen videos people using 1.0 and pulling up a choice between zip file or raw files.
If you can let me know that would be great and thanks again for your help!
Click to expand...
Click to collapse
I used version 1.0.14
http://www.asus-zenfone.com/2015/12/download-asus-flashtool-10014-for-windows.html
I just selected Z580CA and flashed the raw file. It wouldn't let me flash any ZIP, so I had so search for the correct image.
I zipped the RAW file ...
Working as expected and debricked my asus
Cool & Thanks !
Z580C tablet is bricked, it happened on update, I think battery was too low. Screen is black all the time, under windows device manager it connects as Intel Soc/ Moorefield Device (Intel platform Flash Tool Lite is installed and this tool is seeing that device is connected and it reboots (connects/reconnects) every few minutes), tablet does not connect as Android adb deivice and Android Flash Tool doesn't see device. Any suggestions !?
Thank you
a problem
my version is cn. now i can only connect my tab with computer through intel platform flash tool lite. i download the cn.zip from asus website but i cannot find any flash.xml in the zip but some .img can you help me
I accidentally used the ROM a rom of the S7 MT6580, to flash my note 7 (Clone) n930f MT6580 with sp flash tool.
Now my phone is stocked at the Android boot logo & sometimes it wont even start. How can I solve this issue or is there a correct ROM for my phone?
Another rom that is suitable is fine to if I can install that without having ADB/download modus on(not possible).
You will be hard pressed as cline devices use a hacked together version of Android and almost never post the files due to copyright lawsuits.
Also xda doesn't deal with knock offs.
ozkanreyes said:
I accidentally used the ROM a rom of the S7 MT6580, to flash my note 7 (Clone) n930f MT6580 with sp flash tool.
Now my phone is stocked at the Android boot logo & sometimes it wont even start. How can I solve this issue or is there a correct ROM for my phone?
Another rom that is suitable is fine to if I can install that without having ADB/download modus on(not possible).
Click to expand...
Click to collapse
Try to flash it with the stock rom suited for your device. If it does not solve the problem, try to post in a thread related to your device and its problems The thread should have many replies for a higher chance that your question to be noticed by other members.
bricked13 said:
Try to flash it with the stock rom suited for your device. If it does not solve the problem, try to post in a thread related to your device and its problems The thread should have many replies for a higher chance that your question to be noticed by other members.
Click to expand...
Click to collapse
Do you know where I could find the right Rom, I managed to find a "system . img" file. (dont know if it is a right phone, but that one does not have a scatter file in it so don't know how this would work since I don have a working OS to install or use twrp recovery on my phone.
I also discovered a ROM of liniage os that is suitable with my device, but then again I need to have twrp recovery on my device.
ADB and download modus is not possible on my phone unfortunately.
ozkanreyes said:
Do you know where I could find the right Rom, I managed to find a "system . img" file. (dont know if it is a right phone, but that one does not have a scatter file in it so don't know how this would work since I don have a working OS to install or use twrp recovery on my phone.
I also discovered a ROM of liniage os that is suitable with my device, but then again I need to have twrp recovery on my device.
ADB and download modus is not possible on my phone unfortunately.
Click to expand...
Click to collapse
I found a here https://mtkfirmware.blogspot.com/2016/11/samsung-note-7-clone-firmware-mt6580.html you should check it out to see if its your rom. Download it then extract. Most of the time the .rar file contains the SCATTER FILE specifically for that rom. But if it doesn't, just google it.
Hit the thanks button if it helped you! :good:
bricked13 said:
I found a here you should check it out to see if its your rom. Download it then extract. Most of the time the .rar file contains the SCATTER FILE specifically for that rom. But if it doesn't, just google it.
Hit the thanks button if it helped you! :good:
Click to expand...
Click to collapse
This .rar file of this Rom has a password. The password of it is not given.
Do you know it?
ozkanreyes said:
This .rar file of this Rom has a password. The password of it is not given.
Do you know it?
Click to expand...
Click to collapse
Sorry I don't know it. But try these passwords, mtkfirmware.blogspot.com and mtkfirmware. If they don't work. I'll provide you with a new link
bricked13 said:
Sorry I don't know it. But try these passwords, mtkfirmware.blogspot.com and mtkfirmware. If they don't work. I'll provide you with a new link
Click to expand...
Click to collapse
They don't work. If it is possible to provide me with a new link that would be awesome!
ozkanreyes said:
They don't work. If it is possible to provide me with a new link that would be awesome!
Click to expand...
Click to collapse
Try this. But I dont know if its clone
choose any rom from the site.
https://samsung-firmware.org/model/SM-N930F/
How can I access download modus?
The download modus button is not working anymore. Same applies for adb(both where working before )
I can go to the recovery/fastboot/normal mode, but if I select one of the recovery/fastboot/normal not happens and the phone goes out
https://drive.google.com/file/d/0B9pNm-PDZG99eFdWUWJUamdtb1U/view
bricked13 said:
https://drive.google.com/file/d/0B9pNm-PDZG99eFdWUWJUamdtb1U/view
Click to expand...
Click to collapse
This one also has a password!
Hi everyone,
I've recently messed up terribly on the Canadian model of this phone. The model # is KII-L05 and the problem is that I'm stuck on the logo screen when booting.
I was unable to flash a custom ROM properly and have no backups. I have TWRP 3.1.1-0 installed and have tried flashing cm12.1, cm-13.0, lineage-13.0 and lineage-14.1 with the proper gapps to no success. I also tried eRecovery (with a lot of trouble getting to it using the Vol+/- because it loads TWRP 99% of the time) but it won't detect the dload/UPDATE.APP that I acquired from the Canadian Huawei support site nor will it update via wifi.
I've run out of ideas so I'd appreciate some assistance in finding a solution either getting back to stock ROM(firmware?) or a custom ROM that supports this model.
If there's already an answer posted, please pass along the link as I've come up with nothing searching and following most of what's been said before.
Thanks,
You just have an option to restore the backup if someone can share it.
shashank1320 said:
You just have an option to restore the backup if someone can share it.
Click to expand...
Click to collapse
I was hoping it wouldn't have to come to that...
For clarity, would that be using TWRP to restore the backup or using the eRecovery/UPDATE.APP method?
I'll try my luck in the file repository to see if anyone has it.
Dominic987 said:
I was hoping it wouldn't have to come to that...
For clarity, would that be using TWRP to restore the backup or using the eRecovery/UPDATE.APP method?
I'll try my luck in the file repository to see if anyone has it.
Click to expand...
Click to collapse
you should try both.
TWRP backup and dload method. any of them could work
Dominic987 said:
I was hoping it wouldn't have to come to that...
For clarity, would that be using TWRP to restore the backup or using the eRecovery/UPDATE.APP method?
I'll try my luck in the file repository to see if anyone has it.
Click to expand...
Click to collapse
Extract your update.app using a program like 7zip -- it should contain a boot.img file. Use the ADB method to manually flash the file.
While your at it, if there is a system.img file -- flash that as well.
bb709394 said:
Extract your update.app using a program like 7zip -- it should contain a boot.img file. Use the ADB method to manually flash the file.
While your at it, if there is a system.img file -- flash that as well.
Click to expand...
Click to collapse
It may not work and dload will be best option here.
Fastboot may not allow him anymore to flash anything
bb709394 said:
Extract your update.app using a program like 7zip -- it should contain a boot.img file. Use the ADB method to manually flash the file.
While your at it, if there is a system.img file -- flash that as well.
Click to expand...
Click to collapse
shashank1320 said:
It may not work and dload will be best option here.
Fastboot may not allow him anymore to flash anything
Click to expand...
Click to collapse
Your suggestions are noted.
I'll try my luck at waiting a while longer for someone with a backup until I go flashing more things.
Did you try flashing stock recovery then flashing via dload?
hassanjavaid8181 said:
Did you try flashing stock recovery then flashing via dload?
Click to expand...
Click to collapse
I mentioned in my original post that I have no backups. Unfortunately, that includes me not having stock recovery to start from scratch.
My current eRecovery doesn't recognize anything I put into dload nor does it update via wifi.
I'm currently outreaching to Huawei Canada (been more than a few days without a response) as well as friends/coworkers that may have the phone that can help with no success.
Dominic987 said:
I mentioned in my original post that I have no backups. Unfortunately, that includes me not having stock recovery to start from scratch.
My current eRecovery doesn't recognize anything I put into dload nor does it update via wifi.
I'm currently outreaching to Huawei Canada (been more than a few days without a response) as well as friends/coworkers that may have the phone that can help with no success.
Click to expand...
Click to collapse
do you have orignal firmware file for your phone?if not download it from huawei website acoording to you model number
hassanjavaid8181 said:
do you have orignal firmware file for your phone?if not download it from huawei website acoording to you model number
Click to expand...
Click to collapse
Dominic987 said:
... it won't detect the dload/UPDATE.APP that I acquired from the Canadian Huawei support site nor will it update via wifi. ...
Click to expand...
Click to collapse
No backups, that includes anywhere internal or external of the phone in question. Already tried the Huawei site and they have Marshmallow - I suspect I need anything older that's on Lollipop.
Dominic987 said:
No backups, that includes anywhere internal or external of the phone in question. Already tried the Huawei site and they have Marshmallow - I suspect I need anything older that's on Lollipop.
Click to expand...
Click to collapse
Unfortunately there are no official firmware yet for this mate. I tried looking for you but couldn't get any. Its just OTA and not full firmware that could help you with dload.
Dominic987 said:
No backups, that includes anywhere internal or external of the phone in question. Already tried the Huawei site and they have Marshmallow - I suspect I need anything older that's on Lollipop.
Click to expand...
Click to collapse
May be last option is to take it to Huawei service center they will fix it for you.
Hi, does anybody know where are the downloaded OTA .zip files are located, I have root, but I just can't find it.
/cache
or
/data/ota
or
/data/ota_package
/data/OTA-package/update.zip
Assuming you've downloaded the update via the OTA settings tab, the update.zip will be at this location and can be transferred to your PC or flashed using TWRP as-is from the above location.
Thank you! Found it in /data/OTA-package/!
AdamBarath said:
Thank you! Found it in /data/OTA-package/!
Click to expand...
Click to collapse
If it is Android 12 update for EU version (DN2103, C01), would you be as kind as to share it?
ruh01 said:
If it is Android 12 update for EU version (DN2103, C01), would you be as kind as to share it?
Click to expand...
Click to collapse
I think there is something wrong with my Android 12 update file, I extracted it, tried to install it with twrp recovery, and it didn't even start to flash it.
It is installed in Zip format.
Yes, when I try to install it, the following error message pops up: could not extract ... update binary. Any ideas?
Do not extract the file. Flash it directly, leave it zipped.
Thank you for your reply! By "extracting" I referred to extracting it from the folder data/ota... I left it zipped and tried to install it, did not work unfortunately. Thoughts about the issue? I have 0 clue.
Please post it here and maybe someone will figure it out.
AdamBarath said:
Thank you! Found it in /data/OTA-package/!
Click to expand...
Click to collapse
Upload it somewhere like GDrive or MEGA please!
CBET said:
Upload it somewhere like GDrive or MEGA please!
Click to expand...
Click to collapse
Okay, I finally flashed it successfully, how do I upload it?
First, make sure it doesn't get deleted. It's golden bro . Try Mega upload
Uploading it to MEGA, it'll take roughly one hour, sorry I have terrible upload speed.
Screenshot, 2022-07-07 18:14:49 - Paste.Pics
Screenshot view
paste.pics
If it is the european update (DN2103 C.01) the effort will have been to a most noble case. But you didn't say how you managed to flash it, you said there was a problem...
This is indeed the European update DN2103 C.01. I had root access on the previous version (OOS 11), with TWRP, there was something wrong with the older TWRP, I flashed the zip package with the newer version (3.6.0_11-0 denniz).
You can download the full update with the following link:
4.47 GB file on MEGA
mega.nz
Before flashing the zip, I flashed the stock boot.img (A.20).
Thank you a lot. So you flashed from stock recovery or from update menu in settings?
I flashed it with TWRP, after flashing stock boot, I reinstalled TWRP