Hi, does anybody know where are the downloaded OTA .zip files are located, I have root, but I just can't find it.
/cache
or
/data/ota
or
/data/ota_package
/data/OTA-package/update.zip
Assuming you've downloaded the update via the OTA settings tab, the update.zip will be at this location and can be transferred to your PC or flashed using TWRP as-is from the above location.
Thank you! Found it in /data/OTA-package/!
AdamBarath said:
Thank you! Found it in /data/OTA-package/!
Click to expand...
Click to collapse
If it is Android 12 update for EU version (DN2103, C01), would you be as kind as to share it?
ruh01 said:
If it is Android 12 update for EU version (DN2103, C01), would you be as kind as to share it?
Click to expand...
Click to collapse
I think there is something wrong with my Android 12 update file, I extracted it, tried to install it with twrp recovery, and it didn't even start to flash it.
It is installed in Zip format.
Yes, when I try to install it, the following error message pops up: could not extract ... update binary. Any ideas?
Do not extract the file. Flash it directly, leave it zipped.
Thank you for your reply! By "extracting" I referred to extracting it from the folder data/ota... I left it zipped and tried to install it, did not work unfortunately. Thoughts about the issue? I have 0 clue.
Please post it here and maybe someone will figure it out.
AdamBarath said:
Thank you! Found it in /data/OTA-package/!
Click to expand...
Click to collapse
Upload it somewhere like GDrive or MEGA please!
CBET said:
Upload it somewhere like GDrive or MEGA please!
Click to expand...
Click to collapse
Okay, I finally flashed it successfully, how do I upload it?
First, make sure it doesn't get deleted. It's golden bro . Try Mega upload
Uploading it to MEGA, it'll take roughly one hour, sorry I have terrible upload speed.
Screenshot, 2022-07-07 18:14:49 - Paste.Pics
Screenshot view
paste.pics
If it is the european update (DN2103 C.01) the effort will have been to a most noble case. But you didn't say how you managed to flash it, you said there was a problem...
This is indeed the European update DN2103 C.01. I had root access on the previous version (OOS 11), with TWRP, there was something wrong with the older TWRP, I flashed the zip package with the newer version (3.6.0_11-0 denniz).
You can download the full update with the following link:
4.47 GB file on MEGA
mega.nz
Before flashing the zip, I flashed the stock boot.img (A.20).
Thank you a lot. So you flashed from stock recovery or from update menu in settings?
I flashed it with TWRP, after flashing stock boot, I reinstalled TWRP
Related
Anyone have a stock firmware zip that can be flashed in stock recovery? I messed up some system files and can't get back into android. Thanks to anyone in advance.
Here you have it: S6000_A422_001_006_130703_CN_WiFi.
thanks
Is there any way to get clockwork mod recovery on the s6000?
bgcngm said:
Here you have it: S6000_A422_001_006_130703_CN_WiFi.
Click to expand...
Click to collapse
Sure, grab the attached file. Compiled just yesterday.
More than just saying thanks, hit "Thanks" button.
Errors
for some reason I cant get this to flash to the s6000. did you have any scucess? I used the scatter file provided but am getting the following error when I try to flash. any ideas?
bgcngm said:
Sure, grab the attached file. Compiled just yesterday.
More than just saying thanks, hit "Thanks" button.
Click to expand...
Click to collapse
The error message is clear: use Firmware Upgrade option on SP Flash Tool. For that, you have to load all partitions and that should not be a problem taking into consideration that I've already shared the link to the full package.
thanks but
Thank you for the help but its really not working out as easy as that. I am getting checksum errors now too. If you think of anything else it might be please let me know.
Isnt there a way to flash this in fastboot? I tired but it wont let me but was wondering if it was because the bootloader is locked?
bgcngm said:
The error message is clear: use Firmware Upgrade option on SP Flash Tool. For that, you have to load all partitions and that should not be a problem taking into consideration that I've already shared the link to the full package.
Click to expand...
Click to collapse
Just delete checksums.ini file and proceed with flashing.
So just so I am clear on what I need to do.
Download stock firware from link you provided
Extract image to drive
Replace stock recovery.img with CWM version
Replace scatter file with version from CWM download?
Delete checsum.ini from MTK tools folder
Load CWM scatter file
Check DA/DL box in SP tool
Click Firmware upgrade button
If this is correct then it doesnt work. Or perhaps I am leaving out a step. Thanks for your help.
bgcngm said:
Just delete checksums.ini file and proceed with flashing.
Click to expand...
Click to collapse
Just out of curiosity, why are you quoting my posts? Is it really necessary?
Anyway, the process you mentioned is correct, but perhaps you're using an old version of SP Flash Tool. Note that the scatter file that goes along with CWM recovery is the original, taken from the stock firmware package.
I have the latest SP flash tool. Does not work. Thanks for the help anyway.
The latest? Which version is it?
Thank you sir for all of your help. I did get it working finally. If you don't mind me asking, how did you compile the cwm? Using the online builder? Any chance you could compile a US version ?
Hey, would you mind giving me a little guidance on how to build the US version of this CWM recovery? It would be greatly appreciated... you have no idea...
I have compiled it from sources, not using the builder as it is not totally compatible with MTK devices. Anyway, what do you mean with "US version"?
Also, do you mind saying how you get it working? It may be useful for others. Let me know the SP Flash Tool version you've used.
I'll post the sp version. What I mean by US is that I had received a copy of the US firmware (a US version of the CN you posted) but when I tried to use the CWM you compiled with it, it did not work. I am in the US so running a China firmware is not optimal, but is OK I just had to side load Google apps and change the language.
It seems you forgot to tell which version you've used. Also, if you know where to find the US firmware please let me know.
US firmware
Hi All, any news on US firmware ?
Hi everyone.
I have a 4gb version without 3g.
Bought it in China. Tried to use russian ROM but it was corrupted, so now I need some ROM to make tablet work again.
I tried ROM from this thread, but SP flash tool showed a mistake that it's not enough memory. So, now my tablet is a brick. Where can I find another firmware?
I think that this is want you want / need: S6000_A422_001_005_130524_CN4_WiFi.
This is a 100% stock flashable zip of the recently released 4.4.2 firmware for the P5200. As it is 100% stock, it is fully bloated, odexed, and non-rooted. If you wish to attain root you can do so by flashing superSU-2.02 zip from chainfire. As of right now, no other root method appears to be working, including towelroot.
Download link below.
A deodexed + rooted build is also available.
NOTE: if you flash the deodexed version and have problems with root, flash UPDATE-SuperSU-v2.02.zip from here. I don't anticipate any root problems, but just in case, this will fix it.
100% stock: STOCK-4.4.2-P5200(fixed).zip
Deodexed + rooted: STOCK-DEODEXED-ROOTED-4.4.2-P5200(fixed).zip
Anyone may feel free to use this as a base for their ROM. I only ask that you give me credit.
Restl3ss said:
This is a 100% stock flashable zip of the recently released 4.4.2 firmware for the P5200. As it is 100% stock, it is fully bloated, odexed, and non-rooted. If you wish to attain root you can do so by flashing superSU-2.02 zip from chainfire. As of right now, no other root method appears to be working, including towelroot.
Download link below.
A deodexed + rooted build is in the works. Bear with me.
100% stock: STOCK-4.4.2-P5200.zip
Anyone may feel free to use this as a base for their ROM. I only ask that you give me credit.
Click to expand...
Click to collapse
Very good work done by you! Yesterday I spent hours to unzip the file but unsuccessfully. I will try it right now! Thanks a lot!
Restl3ss said:
This is a 100% stock flashable zip of the recently released 4.4.2 firmware for the P5200. As it is 100% stock, it is fully bloated, odexed, and non-rooted. If you wish to attain root you can do so by flashing superSU-2.02 zip from chainfire. As of right now, no other root method appears to be working, including towelroot.
Download link below.
A deodexed + rooted build is in the works. Bear with me.
100% stock: STOCK-4.4.2-P5200.zip
Anyone may feel free to use this as a base for their ROM. I only ask that you give me credit.
Click to expand...
Click to collapse
I tried but it doesn't flash. Received "failed" message. I am using the latest TWRP by angel666. Any idea what I am doing wrong?
edsoedso said:
I tried but it doesn't flash. Received "failed" message. I am using the latest TWRP by angel666. Any idea what I am doing wrong?
Click to expand...
Click to collapse
I've got the same problem.
Hold on, I'm working on it
@edsoedso
@Max4000
I think I've fixed it. Reuploading now. Bear with me.
The problem was a fairly stupid one. I edited the assert to fit P5200 instead of P5210 (I'm using the same updater-script I used for the wifi model stock kitkat).
Problem is, I used mac textedit instead of gedit. One preserves linux encoding, the other does not. Can you guess which is which?
I believe it was Homer Simpson who said, "DOH".
Anyway, edited the updater-script with gedit and just removed the assert completely, so once it's done uploading you should be able to flash without issue.
Restl3ss said:
@edsoedso
@Max4000
I think I've fixed it. Reuploading now. Bear with me.
The problem was a fairly stupid one. I edited the assert to fit P5200 instead of P5210 (I'm using the same updater-script I used for the wifi model stock kitkat).
Problem is, I used mac textedit instead of gedit. One preserves linux encoding, the other does not. Can you guess which is which?
I believe it was Homer Simpson who said, "DOH".
Anyway, edited the updater-script with gedit and just removed the assert completely, so once it's done uploading you should be able to flash without issue.
Click to expand...
Click to collapse
Do not worry, I installed stock 4.4.2 using odin, than TWRP and superuser. It looks great! Please work on 4.4.2 Pimpdroid and let us known the results. Regards!
@Max4000
@edsoedso
Fixed version is now uploaded. Enjoy
@edsoedso
I know you've already got kk working, but would you be willing to try this zip to make sure it works? I think i've ironed it out but i'd like to be sure. Can't test myself as I have the WiFi model
just uploaded a deodexed + rooted build. If you have any troubles with root flash SuperSU from the link in OP.
do i need to clear data and cache beforce flashing ? cuz i don't have sd card so if i clear data the rom will delete.
khaledreno said:
do i need to clear data and cache beforce flashing ? cuz i don't have sd card so if i clear data the rom will delete.
Click to expand...
Click to collapse
I always do a factory reset, format data, and full wipe with any ROM Can you move your files to your PC via USB cable?
khaledreno said:
do i need to clear data and cache beforce flashing ? cuz i don't have sd card so if i clear data the rom will delete.
Click to expand...
Click to collapse
I flashed without wiping and had big problems. You should really do a full wipe.
Restl3ss said:
@Max4000
@edsoedso
Fixed version is now uploaded. Enjoy
@edsoedso
I know you've already got kk working, but would you be willing to try this zip to make sure it works? I think i've ironed it out but i'd like to be sure. Can't test myself as I have the WiFi model
Click to expand...
Click to collapse
I just saw your note. I am downloading both versions, flash them and let you know.
i have downloaded both versions but instal failed
any way does any one know which site i can download the MD5 of the software without corruption ?
Restl3ss said:
@Max4000
@edsoedso
Fixed version is now uploaded. Enjoy
@edsoedso
I know you've already got kk working, but would you be willing to try this zip to make sure it works? I think i've ironed it out but i'd like to be sure. Can't test myself as I have the WiFi model
Click to expand...
Click to collapse
@Restl3ss:
I flashed both versions using TWRP 2.6.3.0 and everything went well. The first unrooted rom after completing flashing offered to install superuser and I did it. The second rom version did not offered it so I rebooted to TWRP and installed superuser from sd card. I am keeping the second version on my tablet. Looks nice and works very well. I will remove some system apps that I do not use and free some additional memory.
It seems that battery is draining faster than 4.2.2. Does anybody note it? Any solution? Thank you!
I have tried the rootet and fixed version, , but it doesn´t work, it hangs on boot!
Installed with TWRP 2.7.1.0, may i have to install this ROM with Odin ?
jamalau said:
I have tried the rootet and fixed version, , but it doesn´t work, it hangs on boot!
Installed with TWRP 2.7.1.0, may i have to install this ROM with Odin ?
Click to expand...
Click to collapse
hey man you need to wipe system, data,cache and dalvik-cache
then flash the zip and it should work
edsoedso said:
@Restl3ss:
I flashed both versions using TWRP 2.6.3.0 and everything went well. The first unrooted rom after completing flashing offered to install superuser and I did it. The second rom version did not offered it so I rebooted to TWRP and installed superuser from sd card. I am keeping the second version on my tablet. Looks nice and works very well. I will remove some system apps that I do not use and free some additional memory.
Click to expand...
Click to collapse
Is there an update zip for recovery? I have 2.6.1 twrp and get error message during install. Can i update to latest twrp or philz by Flash, or do i have to connect the tab to PC, and need to do the beginners Steps?
Thanks for advices
Aaah, i got it... A flashable philz for p5200...
quitschibu84 said:
Is there an update zip for recovery? I have 2.6.1 twrp and get error message during install. Can i update to latest twrp or philz by Flash, or do i have to connect the tab to PC, and need to do the beginners Steps?
Thanks for advices
Aaah, i got it... A flashable philz for p5200...
Click to expand...
Click to collapse
Can you post the link for the Philz 5200 recovery?
thks
Hey! I am having problem flashing the OTA zip (LRX21L-->LRX21R). It simply wont let me sideload the .zip file because my device can't be found after i reboot to the bootloader. Can anyone please help me with this?
My device has an unlocked bootloader and is rooted using Chainfires first root for the nexus 9. Thanks in advance!
acceh said:
Hey! I am having problem flashing the OTA zip (LRX21L-->LRX21R). It simply wont let me sideload the .zip file because my device can't be found after i reboot to the bootloader. Can anyone please help me with this?
My device has an unlocked bootloader and is rooted using Chainfires first root for the nexus 9. Thanks in advance!
Click to expand...
Click to collapse
Flash the 21l boot.img in fastboot. Then try the ota. Chain fire modified the boot image and that's why it isn't working
Sent from my Nexus 9 using XDA Free mobile app
Where do i get that 21l img file? And how to flash if fastboot is not recognized? I have twrp installed, could someone provide a flashable zip? Thanks
GeneralSmart said:
Where do i get that 21l img file? And how to flash if fastboot is not recognized? I have twrp installed, could someone provide a flashable zip? Thanks
Click to expand...
Click to collapse
Yeah...., I could go with this too, actually. I had pretty much everything from the board loaded. Including @Chainfire 's recov. I then later attempted to update the *poluza rom parts. It was failing any which way I tried in or out of twrp. Unfortunately, I am not much of a fastboot user, nor twrp.
I thought that maybe it had something to do with this updated vendor img. By the time I was done I had reformatted several times and started from scratch not leaving out steps. As far as I know. With just these images and no device trees nor a proper updater script, there is no way to tell really.
Currently and for a few days, it's been down to bare metal, and only a fastboot to look at. lol
I can't even seem to make a new factory image flash.
Never since my first android have I been this lost frankly.....
Maybe they have them now, I will look but it would also be helpful if the guys used a bit of ......'if.....then......' in their 'OP's'
"If you are using the included recovery, then......"
"If you are using this recovery then do......."
"If you wanted to use @Chainfire s recovery, then simply paste it......."
etc.
Could anyone possibly help and provide a way to update??? I unlocked bootloader and I am rooted, but now I want to have a working way to update....ANY HELP??
I found a solution: check out the video and download his tool...he did a great job there and it worked like a charm for me!!!!!!!!!!!!!!!!!!!!!!!!!!
https://www.youtube.com/watch?v=bsU1r6wKMiA
its the tool on the second link under the video...around 750 MB sized
I'll try and keep this short and to the point. If you unlocked your bootloader and flashed TWRP and SuperSU, theirs a Good chance your phone will not return to stock and take OTA updates. Many of us have tried but for some reason the updates just fail.
Well we are lucky and someone captured and posted the 3 known updates and I'm going to show you how to flash them
New ~ All in One ~ update Instructions in Post 2
We now have a new way to do this, So the information below is just for information sake So bare with me while I get the Guide updated...
Other Files you may need
H1611.TWRP.New.img <<- This is the New Twrp by yuweng I Highly recommend everyone use this Version
minimal_adb_fastboot_v1.4.1_setup.exe
Huawei_Android_phone_drivers(1).rar
I have been working on this for some time and I now have an ALL in One Flash solution
This will allow you to flash a Single Rom to Update or Downgrade your firmware and Rom
As with any firmware update or downgrade I'm not responsible to what happens to your phone you do this at your own risk
(rest assured I have tested all these files and my phone is fine)
The Flash instructions are the same as any rom flash on this phone
Step one is to Boot to the bootloader and boot H1611.TWRP.New.img
fastboot boot H1611.TWRP.New.img
Swipe to allow modifications to System
then choose Mount and check system and cust
Select Storage Micro SDcard
Next is install and choose your Bxxx_Full_Update.zip
Swipe to flash
Reboot
That's really all their is too it, Just choose the File below that you want to update or downgrade too
Note: The phone always loads the AT&T logo and reboots the first time and then loads normally
First boot will take you to the setup screen if you formatted data
Another thing i noticed while test flashing these files is that the Data partition becomes Encrypted after the flash
This means before you can restore a data backup or flash a Rom like CleanRom (it includes data) you'll need to Format Data to UN-encrypt it
Also some roms may need to have SuperSU flashed after the Rom or the phone may not boot the first time after the upgrade.
AS Always make a complete backup of your phone before you start any flashing
Downloads
~New~ B180_Full_Update.zip
Note about B180 - If you have no wifi or the phone won't boot simply extract the boot.img from the rom and flash it with TWRP (Install Image) or fastboot (fastboot flash boot boot.img) also the AT&T Logo is missing for now but everything else works
Thanks To @madvane20 Download >> B170 Stock Full Update with Firmware
B160_Full_Update.v2.zip
B150_Full_Update.zip
I had to make B140 into 2 flashes but it works the same just copy both files to your phone and Flash A then B
B140_Full_Update.A.zip
B140_Full_Update.B.zip
B130_Full_Update.zip
Huge thanks to @madvane20 for helping with the partition layouts and testing and to @worstenbrood for the Huawei Update Extractor tool
Where do I start if I have B140 rooted on my XT? Maybe some numbers or section titles would help answer that. Thanks .
divineBliss said:
Where do I start if I have B140 rooted on my XT? Maybe some numbers or section titles would help answer that. Thanks .
Click to expand...
Click to collapse
You start at the 2nd half of the updated guide B140 to B150
the process is the same no matter what version your on
So I should start with B130 stock files even though I'm in B140 rooted right now?
clsA said:
You still start at the top and substitute the B150 files where their needed
the process is the same no matter what version your on
Click to expand...
Click to collapse
divineBliss said:
So I should start with B130 stock files even though I'm in B140 rooted right now?
Click to expand...
Click to collapse
... no you would start at returning your phone to Stock B140 and continue from their
flashing the B150 firmware then the B150 stock system and /cust
We have the B150 files and the guide is updated
If I can get back to B140 stock and take the B150 OTA, which files do you need?
clsA said:
The guide is not complete ... no you would start at returning your phone to Stock B140 and continue from their
flashing the B150 firmware then the B150 stock system and /cust
We don't have the B150 files yet so it's hard to complete the guide
Click to expand...
Click to collapse
divineBliss said:
If I can get back to B140 stock and take the B150 OTA, which files do you need?
Click to expand...
Click to collapse
is that a trick question ? if you could get back to stock and take the OTA this post wouldn't be necessary now would it ?
The whole point of the thread is that no one who rooted has been able to return to stock and take an OTA
Why bother updating? Isn't someone working in Lineage for this phone?
guest_2011 said:
Why bother updating? Isn't someone working in Lineage for this phone?
Click to expand...
Click to collapse
no one has posted any threads about it
you should still try and be on the latest security patch while you phone is stock
@RN_ReFlux Thank You ! for getting the B150 backup and /cust.img
guest_2011 said:
Why bother updating? Isn't someone working in Lineage for this phone?
Click to expand...
Click to collapse
Yes, someone is working on it but it is best to have your ROM up to date. You may not see a need for it but a lot of others see a need.
clsA said:
@RN_ReFlux any luck getting the B150 backup and /cust.img ?
Click to expand...
Click to collapse
Yes, I have them, am working on zipping some of the larger files, then will upload to drive or dropbox, since I don't have developer access to afh yet.
Only think I forgot to do was get the post-root backup in TWRP. If you need that, I've already asked my cousin to perform the backup, I'll ask her to zip and upload them to me.
RN_ReFlux said:
Yes, I have them, am working on zipping some of the larger files, then will upload to drive or dropbox, since I don't have developer access to afh yet.
Only think I forgot to do was get the post-root backup in TWRP. If you need that, I've already asked my cousin to perform the backup, I'll ask her to zip and upload them to me.
Click to expand...
Click to collapse
Thanks ... I'll post the files to my AFH account if you can share them through google or dropbox ..etc
If you request developer access, it doesn't take that long to get it ........ a few hour maybe if I recall correctly .
RN_ReFlux said:
Yes, I have them, am working on zipping some of the larger files, then will upload to drive or dropbox, since I don't have developer access to afh yet.
Only think I forgot to do was get the post-root backup in TWRP. If you need that, I've already asked my cousin to perform the backup, I'll ask her to zip and upload them to me.
Click to expand...
Click to collapse
divineBliss said:
If you request developer access, it doesn't take that long to get it ........ a few hour maybe if I recall correctly .
Click to expand...
Click to collapse
Requested it about 12 hours ago
Uploading to drive now.
Sent from my SM-T530 using Tapatalk
divineBliss said:
...
Click to expand...
Click to collapse
All the files are uploaded for your B140 to B150 update...
I'll be updating the guide soon.
The steps in a nutshell are
flash your stock B140 system/boot/recovery and stock b140 /cust
force flash the dload/update.app for b150 with the dialer code
boot TWRP restore stock B150 system and dd the B150 /cust
Flash SuperSU and Factory Reset (< optional)
reboot system and it boots to a clean B150
Click to expand...
Click to collapse
Guide is updated !
Has anyone been able to follow the OP to get up to B150 from either B140 or B130? Or even B130 to B140? Thanks!
clsA said:
All the files are uploaded for your B140 to B150 update...
I'll be updating the guide soon.
The steps in a nutshell are
Guide is updated !
Click to expand...
Click to collapse
divineBliss said:
Has anyone been able to follow the OP to get up to B150 from either B140 or B130? Or even B130 to B140? Thanks!
Click to expand...
Click to collapse
Yeah me
Sent from my Nexus 6P using Tapatalk
Be careful upgrading from B130 to B140. Went from stock non-rooted B130 to B140 using the SD card update method and hidden menu. While it went through the update process without reporting an error but after auto reboot it still showed the same version but lost WIFI functionality, mac address showed mostly 00s and can't restore full backup from TWRP without errors on /data, etc.
Anyone know if there are .img equivalent of 2017-01-26-H1611.B130.stock.complete to attempt restore from either fastboot flash or dd?
Hi everyone,
I've recently messed up terribly on the Canadian model of this phone. The model # is KII-L05 and the problem is that I'm stuck on the logo screen when booting.
I was unable to flash a custom ROM properly and have no backups. I have TWRP 3.1.1-0 installed and have tried flashing cm12.1, cm-13.0, lineage-13.0 and lineage-14.1 with the proper gapps to no success. I also tried eRecovery (with a lot of trouble getting to it using the Vol+/- because it loads TWRP 99% of the time) but it won't detect the dload/UPDATE.APP that I acquired from the Canadian Huawei support site nor will it update via wifi.
I've run out of ideas so I'd appreciate some assistance in finding a solution either getting back to stock ROM(firmware?) or a custom ROM that supports this model.
If there's already an answer posted, please pass along the link as I've come up with nothing searching and following most of what's been said before.
Thanks,
You just have an option to restore the backup if someone can share it.
shashank1320 said:
You just have an option to restore the backup if someone can share it.
Click to expand...
Click to collapse
I was hoping it wouldn't have to come to that...
For clarity, would that be using TWRP to restore the backup or using the eRecovery/UPDATE.APP method?
I'll try my luck in the file repository to see if anyone has it.
Dominic987 said:
I was hoping it wouldn't have to come to that...
For clarity, would that be using TWRP to restore the backup or using the eRecovery/UPDATE.APP method?
I'll try my luck in the file repository to see if anyone has it.
Click to expand...
Click to collapse
you should try both.
TWRP backup and dload method. any of them could work
Dominic987 said:
I was hoping it wouldn't have to come to that...
For clarity, would that be using TWRP to restore the backup or using the eRecovery/UPDATE.APP method?
I'll try my luck in the file repository to see if anyone has it.
Click to expand...
Click to collapse
Extract your update.app using a program like 7zip -- it should contain a boot.img file. Use the ADB method to manually flash the file.
While your at it, if there is a system.img file -- flash that as well.
bb709394 said:
Extract your update.app using a program like 7zip -- it should contain a boot.img file. Use the ADB method to manually flash the file.
While your at it, if there is a system.img file -- flash that as well.
Click to expand...
Click to collapse
It may not work and dload will be best option here.
Fastboot may not allow him anymore to flash anything
bb709394 said:
Extract your update.app using a program like 7zip -- it should contain a boot.img file. Use the ADB method to manually flash the file.
While your at it, if there is a system.img file -- flash that as well.
Click to expand...
Click to collapse
shashank1320 said:
It may not work and dload will be best option here.
Fastboot may not allow him anymore to flash anything
Click to expand...
Click to collapse
Your suggestions are noted.
I'll try my luck at waiting a while longer for someone with a backup until I go flashing more things.
Did you try flashing stock recovery then flashing via dload?
hassanjavaid8181 said:
Did you try flashing stock recovery then flashing via dload?
Click to expand...
Click to collapse
I mentioned in my original post that I have no backups. Unfortunately, that includes me not having stock recovery to start from scratch.
My current eRecovery doesn't recognize anything I put into dload nor does it update via wifi.
I'm currently outreaching to Huawei Canada (been more than a few days without a response) as well as friends/coworkers that may have the phone that can help with no success.
Dominic987 said:
I mentioned in my original post that I have no backups. Unfortunately, that includes me not having stock recovery to start from scratch.
My current eRecovery doesn't recognize anything I put into dload nor does it update via wifi.
I'm currently outreaching to Huawei Canada (been more than a few days without a response) as well as friends/coworkers that may have the phone that can help with no success.
Click to expand...
Click to collapse
do you have orignal firmware file for your phone?if not download it from huawei website acoording to you model number
hassanjavaid8181 said:
do you have orignal firmware file for your phone?if not download it from huawei website acoording to you model number
Click to expand...
Click to collapse
Dominic987 said:
... it won't detect the dload/UPDATE.APP that I acquired from the Canadian Huawei support site nor will it update via wifi. ...
Click to expand...
Click to collapse
No backups, that includes anywhere internal or external of the phone in question. Already tried the Huawei site and they have Marshmallow - I suspect I need anything older that's on Lollipop.
Dominic987 said:
No backups, that includes anywhere internal or external of the phone in question. Already tried the Huawei site and they have Marshmallow - I suspect I need anything older that's on Lollipop.
Click to expand...
Click to collapse
Unfortunately there are no official firmware yet for this mate. I tried looking for you but couldn't get any. Its just OTA and not full firmware that could help you with dload.
Dominic987 said:
No backups, that includes anywhere internal or external of the phone in question. Already tried the Huawei site and they have Marshmallow - I suspect I need anything older that's on Lollipop.
Click to expand...
Click to collapse
May be last option is to take it to Huawei service center they will fix it for you.