Related
I have a Galaxy Note i717 from AT&T that I rooted. Worked great.
Yesterday I upgraded to ICS via Kies. Worked great.
Then I proceeded to root it again using odin.
Unfortunately even after all the things done it now will not boot up at all.
All I get is the S a m s u n g logo. I can put it into boot mode and the computer see's it but nothing more.
If anyone can point me to any rom/bootloader/ etc. I would be most grateful.
Or just let me know what to do and where to get roms. I did search and there are many for the i700.
I guess I need a bootloader and rom right?
Sorry folks. Point me somewhere else will have to get another phone.
T h a n k s ...
Others would tell you to look in the dev section for the stock rom (its usually called something like "in case of brick) I've had issues issues getting it to work but Im certain it was user error as to why it didn't work for me. But another option that I think could work would be to get your phone into download mode and run the ics upgrade thru kies again. You'll lose everything in your phone but I think it'll get your phone up and running again. But before you do any other that...did you make a nandroid back of? Or have you downloaded any roms to your phone because if you did you can just enter cwm and reflash any rom you may have or just flash your backup, backups are so important when doing these sort of things, saves a lot of head aches.
Edit: after reading your post again it says your phone messed up after rooting, try and re run the root file thru Odin, I kinda sorta remember reading something similar to this were people had issue trying to root. I'll try and find the thread.
Sent from my SAMSUNG-SGH-I717 using xda premium
this happened due to rooting with the Gingerbread method...so using Nash reply run/reinstall your Official ICS...and to root....
see My Links in red in my signature...go the GNote Super page....you should see what is being used to root the Official ICS...I used it and lots others, there prob more methods out there, but I found this is the easiest and more proven method....
Cant miss the info on GNote page regarding Rooting.
so to recap...since your believe you have bricked your phone...
use the method Nash replied to you with...put into download mode....run the official ics, you will need the model, serial number of your phone...
let us know how it works out for you...
mpanwar said:
I have a Galaxy Note i717 from AT&T that I rooted. Worked great.
Yesterday I upgraded to ICS via Kies. Worked great.
Then I proceeded to root it again using odin.
Unfortunately even after all the things done it now will not boot up at all.
All I get is the S a m s u n g logo. I can put it into boot mode and the computer see's it but nothing more.
If anyone can point me to any rom/bootloader/ etc. I would be most grateful.
Or just let me know what to do and where to get roms. I did search and there are many for the i700.
I guess I need a bootloader and rom right?
Sorry folks. Point me somewhere else will have to get another phone.
T h a n k s ...
Click to expand...
Click to collapse
And once you're rooted and all fixed up, enter cwm and create a backup. These are great because no matter what you do to your phone as long as you can enter cwm you'll always be able to fix your phone via backup.
Sent from my SAMSUNG-SGH-I717 using xda premium
I wanted to mention, I'm not sure how you updated thru kies originally (legit update or emergency update) the method you'll be using this time (if you choose to fix thru kies) is the more or less emergency method. I wanted to mention this because when your in download mode and connect your phone to your PC and run kies, kies will try to connect to your device but will time out over time...it took me 2 days of Q and A before I realized kies won't connect with phone in download mode, but that's OK. Once phone is connected click tools/firmware upgrade and initialization, and as bigjoe said youll than need to input model and serial numbers (all caps) than click OK. You'll have a few prompts afterwards but yo basically on your way to a running phone.
Sent from my SAMSUNG-SGH-I717 using xda premium
Brick = nothing at all happening on phone.
Samsung logo = bad flash (corrupt file used)
Brick can sometimes be revived with a JTAG device.
Samsung logo means re download file, re read instructions and relevent thread, and redo your work.
Don't be too anxious -you will fix it.
I suggest using Kies upgrade > emerency firmware method. Download mode is the key.
If you are with Rogers, the following is useful.
http://forum.xda-developers.com/showthread.php?t=1657262
I went through the exact same problem with someone else's Note that I was upgrading, subsequently flashing.
The above process bring the phone back to 100% stock gingerbread.
Thanks All and Resolved.
eugenekim618 said:
If you are with Rogers, the following is useful.
http://forum.xda-developers.com/showthread.php?t=1657262
I went through the exact same problem with someone else's Note that I was upgrading, subsequently flashing.
The above process bring the phone back to 100% stock gingerbread.
Click to expand...
Click to collapse
Thanks all for the replies.
I was able to go to DEV Section and get the full AT&T ICS Rom. Used ODIN to get it back to factory ICS.
Then (with great care ) re-rooted it using ICS root stuff. I have it all in case anyone else needs this route. Else follow instructions above.
Thanks all. I think for now ICS is where this will stay. In fact Gingerbread was good enough except for not being able to use Chrome.
mpanwar said:
Thanks all for the replies.
I was able to go to DEV Section and get the full AT&T ICS Rom. Used ODIN to get it back to factory ICS.
Then (with great care ) re-rooted it using ICS root stuff. I have it all in case anyone else needs this route. Else follow instructions above.
Thanks all. I think for now ICS is where this will stay. In fact Gingerbread was good enough except for not being able to use Chrome.
Click to expand...
Click to collapse
great, can you put solved in the title...thx
I just bought my Note today [came from an Atrix running CM7]. The rep at the store said I would get an OTA update of ICS when I booted up....but that didn't happen. Was he mistaken? So I decided to flash one directly from xda, I've rooted, got odin up and running, flashed CWM and was going to flash an ICS rom...but not sure which one. Most of the ROM threads say discontinued, some are hybrids, can't seem to find just a plain ICS rom. What is the best running ICS rom available? Was the rep wrong and the Note hasn't gotten an official ICS update, as it appears all these roms are from leaked versions that don't retain the original note features.
Any help from anyone that's been around the Note forum for a while and is up to date on all these choices for getting ICS would be awesome!
Thanks
It was released a while ago. You can try the official the kies if you want to give that a shot first. Also, there are some official ics rims (uclf6) means the official release so all of those are official not leaks. But yeah, just read a bit more I'd say.
I would suggest cm9 nightly if you had cm7 on your matrix. Black star is probably the closest to stock that's been updated recently
Sent from my SAMSUNG-SGH-I717 using xda premium
The rep was mistaken
there was no OT but rather updated thru Kies
There is about 3 threads of non discontinued roms that are pure stock ICS
They're there ...
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
Like everyone else is saying you get it through kies. You'll need to get that from the Samsung website. Run a search for it and it should send you the appropriate link
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
here's the link to the post for the official ucfl6 for odin.
Use at your discretion as you can't blame other people for mistakes made when flashing, but I used this and I know it works, if you want a bit more info on it read the thread I linked, good luck.
http://forum.xda-developers.com/showpost.php?p=28525924&postcount=37
Are you US at&t or Canada? The ota update for Canada had problems so if that's you, don't accept it. Do as others have said and use Kies. Don't root or add a recovery until you install the upgrade.
VonEsch said:
Like everyone else is saying you get it through kies. You'll need to get that from the Samsung website. Run a search for it and it should send you the appropriate link
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
..and I thought I was pretty well read on Android [lol]. I didn't realize there would be such difference between manufacturers. Previously I've flashed everything via CWM. This will be my first device utilizing Odin, and Kies. I've already run a couple things via Odin with not problems. I see a lot of references to Kies, [One last question before I begin] is this the same Kies that comes installed on the Note [which appears to be a web-interface to browse your phone contents], or is there a different Kies I should be using for updating ROMs?
rangercaptain said:
Are you US at&t or Canada? The ota update for Canada had problems so if that's you, don't accept it. Do as others have said and use Kies. Don't root or add a recovery until you install the upgrade.
Click to expand...
Click to collapse
Figures, you mention exactly the ONLY two things I've done to my device so far - Rooted, and added CWM. Do you say this because I will have to repeat those processes over again after upgrade, or because they will hinder the upgrade process?
JVogler said:
Figures, you mention exactly the ONLY two things I've done to my device so far - Rooted, and added CWM. Do you say this because I will have to repeat those processes over again after upgrade, or because they will hinder the upgrade process?
Click to expand...
Click to collapse
yes you will loose root and cwm, so if you use the link I posted you can use odin instead of kies, get cwm from braway's thread for odin, and get superuser.zip for ics and put it on the sd card before you start the process, go to download mode, flash the update thru odin, then the cwm thru odin, and then you can boot into cwm and flash the superuser zip, and get root back. Easy. :good:
roloracer said:
yes you will loose root and cwm, so if you use the link I posted you can use odin instead of kies, get cwm from braway's thread for odin, and get superuser.zip for ics and put it on the sd card before you start the process, go to download mode, flash the update thru odin, then the cwm thru odin, and then you can boot into cwm and flash the superuser zip, and get root back. Easy. :good:
Click to expand...
Click to collapse
Thanks, I started the ICS file download a few minutes ago, the 'free' download is really, really, really throttled so it looks like I've got about an hour to wait for that. I got all the other files waiting and ready...should be good to go when the d/l finishes.
Thanks
No that's Kies Air and its about as useless as a third nipple.
Go to the Samsung-Kies site for the upgrade and everyrhing will be there (files to download, drivers, step-by-step directions).
You do this with your pc. You use the stock usb cable. You use usb port on the back of your pc (powered usb).
What he said.....^^^^^^
rangercaptain said:
No that's Kies Air and its about as useless as a third nipple.
Go to the Samsung-Kies site for the upgrade and everyrhing will be there (files to download, drivers, step-by-step directions).
You do this with your pc. You use the stock usb cable. You use usb port on the back of your pc (powered usb).
Click to expand...
Click to collapse
That would explain why I could not find the option to update firmware! Thanks...got the PC version from Samsung site. I'm really liking ICS. It seems like now official Android includes a lot of the features that were in Older Cyanogen Mod versions that made it so much better than stock Android. I'd say it's very possible to be happy with this device leaving it with a stock ROM. For those who have gone the custom route [I'm leaning towards CM9, as I've been happy with CM on my Atrix] are there any features that you couldn't imagine being without. Besides the usual performance tweaks, and bloat removal that would be nice...it would also be nice not chasing the 'nightly threads' and flashing updates at least once a week. It seems there a lot more people in this I717 forum who are sticking with stock ICS, than there were people sticking with stock GB on the Atrix forum. For those running the manufacturer ICS update, is there anything glaring missing that would make you inclined to go custom? I've only been using it for less than a day, and need to make a quick decision where to go custom or not because I leave for a week tomorrow morning.
Thanks again for any input...
...Sorry to all those who have helped with their replys and haven't been 'thanked' properly [get maxed out at 8 / day]. I will try and catch up on that each day, as I really appreciate everyone's input. It's been very useful in making the decision on what devices I purchase, and getting them up and running as desired quickly...especially when working with a device / manufacturer for the first time.
You have CWM. Just go get a few rom's, label them in different folders on your external sd card, get Titanium Backup, an sms and phone call baxkup and restore, and you can flash any rom and put your apps and stuff on without internet access.
When restoring with TiBU only never restore system data. Doing that will make even the fastest rom act sick.
I have to say the collective's aocp is an amazing smooth ROM you lose spen gestures
but there are other apps and features that make me not miss them.i would highly recommend it.
U will loose s pen with all ROMs that don't run touchwiz(cm9, 10, hybrids........) but ur phone will run better. U can get papyrus from the market if that bothers u.
Sent from my jelly bean loaded-I717 using xda app-developers app
After scrounging, searching, hunting, and generally scrubbing every tree/rock/bush for answers, I have decided that it is time to post. As I am new to these forums, I sincerely appreciate any assistance in this matter. I have tried the only two methods that I can find to root my phone. the one by Bin4ry which is found at http://forum.xda-developers.com/showthread.php?t=1886460. and another one from a different site that was for JB. I have made sure that both debugging is on as well as allowing installations of non-market applications. I have tried every single usb mode, that just on the off chance, mine was that one phone that wanted to seperate itself from society. Since my phone is running ICS 4.0.4 I should be using Bin4ry's version, but I get stopped by this
Code:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (18.06.2013) v31 =
======================================================================
Device type:
1) New Standard-Root (thx Ariel Berkman)
2) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
3) Old
4) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 1
Please connect Device with enabled USB-Debugging to your Computer
Doing a Backup first, please confirm this on your device!
Now unlock your device and confirm the backup operation.
Done!
Press any key to continue . . .
Please select the RESTORE MY DATA option now on your device!
Now unlock your device and confirm the restore operation.
Please press any Key when restore is done.
Press any key to continue . . .
Going to reboot now ...
mount: Operation not permitted
3679 KB/s (380532 bytes in 0.101s)
2668 KB/s (1500495 bytes in 0.549s)
3647 KB/s (1165484 bytes in 0.312s)
remote object '/system/bin/ric' does not exist
.
Going to copy files to it's place
mount: permission denied (are you root?)
Rebooting again, please wait!
Could Not Find C:\Users\USERNAME\Desktop\newroot\ric
Restoring previous Backup! Please select the RESTORE MY DATA option now on your
device!
Now unlock your device and confirm the restore operation.
Please press any Key when restore is done.
Press any key to continue . . .
Going to reboot last time now ...
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
It says that It's done and that all is done, but I think that because the mounting permission was denied that it wasn't able to root the device. If I could get some assistance on this from someone with more experience, I'd appreciate it. Does anyone know how to fix/root this device? I don't know if this will make a difference or not but it says the software is VS840PP2
Bump, anyone know anything?
I wish someone would
cecpuman said:
Bump, anyone know anything?
Click to expand...
Click to collapse
I wish someone would resolve this I see people all over the place bragging they have rooted their exceeds "showing proof" and no-one seems to give a crap that some people can't afford the most easily rooted phones and are forced to get the most workable less expensive phones. I have student loans and would have to pay a $400.00 deposit to be able to pay 150 dollars for a semi decent phone and my carrier won't allow me to use the phone I've had for a couple years that I rooted myself. I just want a viable answer to how do you root the exceed I know what I'm doing but I work for a living (making very little at that) and have a child to support so I can't devote a week to figuring it out and am frustrated that nobody seems to give a crap about anything but the new razr or the iphone (trendys).
Rooted mine
D3d10ck said:
I wish someone would resolve this I see people all over the place bragging they have rooted their exceeds "showing proof" and no-one seems to give a crap that some people can't afford the most easily rooted phones and are forced to get the most workable less expensive phones. I have student loans and would have to pay a $400.00 deposit to be able to pay 150 dollars for a semi decent phone and my carrier won't allow me to use the phone I've had for a couple years that I rooted myself. I just want a viable answer to how do you root the exceed I know what I'm doing but I work for a living (making very little at that) and have a child to support so I can't devote a week to figuring it out and am frustrated that nobody seems to give a crap about anything but the new razr or the iphone (trendys).
Click to expand...
Click to collapse
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
scififan68 said:
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
Click to expand...
Click to collapse
Big thanks.Any roms that work on our phone?
---------- Post added at 02:16 AM ---------- Previous post was at 02:01 AM ----------
Can you post instructions on how to flash CM10?
Do i do standard Lucid downgrade to GB procedure?
Thanks in advance.
lviv73 said:
Big thanks.Any roms that work on our phone?
Click to expand...
Click to collapse
Yeah one which is Android 4.1.2, the file is called "cm-10-20130424-UNOFFICIAL-vs840.zip", but you have to rollback to GB 2.3.6(due to locked ics bootloader), install root, CWM and finally install the CM 10 based LG Lucid beta rom. I see you edited your post and yes it is the standard LG Lucid Gingerbread downgrade method. The forum thread title is "[ROM][BETA] CyanogenMod 10 for the LG Lucid" and its on "androidforums.com" all info you need should be in that forum thread. I can tell you that Jellybean works very well on this phone, and I never want to go back to 4.0.4. :good: But of course there are some bugs, as it seems signal strength is lower, but I may have the wrong baseband for this phone.
how to flash clockworkmod
scififan68 said:
Yeah one which is Android 4.1.2, the file is called "cm-10-20130424-UNOFFICIAL-vs840.zip", but you have to rollback to GB 2.3.6(due to locked ics bootloader), install root, CWM and finally install the CM 10 based LG Lucid beta rom. I see you edited your post and yes it is the standard LG Lucid Gingerbread downgrade method. The forum thread title is "[ROM][BETA] CyanogenMod 10 for the LG Lucid" and its on "androidforums.com" all info you need should be in that forum thread. I can tell you that Jellybean works very well on this phone, and I never want to go back to 4.0.4. :good: But of course there are some bugs, as it seems signal strength is lower, but I may have the wrong baseband for this phone.
Click to expand...
Click to collapse
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
D3d10ck said:
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
Click to expand...
Click to collapse
You may have to install the baseband for the Exceed. I think in the CyanogenMod beta thread on AndroidForums there is a link but I'm not sure. Use ROM Manager to install CWM Recovery and then Flash CM10.
Vs840pp 4.1.2
D3d10ck said:
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
Click to expand...
Click to collapse
As long as you're rooted, search on the internet for "cwm installer for lucid" and follow the install instructions on gingerbread, then you want to flash the CWM touch recovery by searching for LGVS840_CWMT.zip and clicking on "CWM Touch Flashable Recovery for LG Lucid 4G - LG Cell Phones ..." Make sure you have the CWMT zip and LG Lucid CM 10.1 zip on your micro sd card. You then use rom manager to boot into recovery and flash the CWMT zip, then do a factory reset and clear caches and finally flash the LG Lucid CM 10.1 available on androidforums.
scififan68 said:
As long as you're rooted, search on the internet for "cwm installer for lucid" and follow the install instructions on gingerbread, then you want to flash the CWM touch recovery by searching for LGVS840_CWMT.zip and clicking on "CWM Touch Flashable Recovery for LG Lucid 4G - LG Cell Phones ..." Make sure you have the CWMT zip and LG Lucid CM 10.1 zip on your micro sd card. You then use rom manager to boot into recovery and flash the CWMT zip, then do a factory reset and clear caches and finally flash the LG Lucid CM 10.1 available on androidforums.
Click to expand...
Click to collapse
May I ask which firmware are you suppose to use to do a roll back? Can you just use the Lucid's firmware or does it have to be the Exceed firmware to work for the roll back?
ls5280 said:
May I ask which firmware are you suppose to use to do a roll back? Can you just use the Lucid's firmware or does it have to be the Exceed firmware to work for the roll back?
Click to expand...
Click to collapse
It's the stock gingerbread for the LG Lucid and you look for the method to install with LG's tool and you will need the file "VS840ZV6_06.S6_06.P58014.R5.cab" and look for how to roll back to gingerbread on the lg lucid to find out how to roll it back.
scififan68 said:
It's the stock gingerbread for the LG Lucid and you look for the method to install with LG's tool and you will need the file "VS840ZV6_06.S6_06.P58014.R5.cab" and look for how to roll back to gingerbread on the lg lucid to find out how to roll it back.
Click to expand...
Click to collapse
Thanks a bunch, I thought it would be okay to do that but just wanted to make sure before doing it.
Hmm, after restoring successfully, for some reason I cant get the Wi-Fi to work. I tried both versions the V5 and V6 in the dropbox posted on android forum. Can root and everything but unable to access any internet without wifi. Kinda stuck without CWM. Any clues?
Edited: Whoops, Haha, a Factory Reset fixed it.
Edited: Blah after being able to install Rom Manager and installing CWM "Successful" I still get into CWM recovery.
Edited: CWM solved but now I get the "Cant Mount Sd" in CWM. Trided both "fat and "extFAT" and no go. Any Help?
Edited: Finally! Bad SD card! CM 10 up and running! Woot!
ls5280 said:
Hmm, after restoring successfully, for some reason I cant get the Wi-Fi to work. I tried both versions the V5 and V6 in the dropbox posted on android forum. Can root and everything but unable to access any internet without wifi. Kinda stuck without CWM. Any clues?
Edited: Whoops, Haha, a Factory Reset fixed it.
Edited: Blah after being able to install Rom Manager and installing CWM "Successful" I still get into CWM recovery.
Edited: CWM solved but now I get the "Cant Mount Sd" in CWM. Trided both "fat and "extFAT" and no go. Any Help?
Edited: Finally! Bad SD card! CM 10 up and running! Woot!
Click to expand...
Click to collapse
Glad to see you got CM 10 on this phone, since it runs pretty good, the only issue I had is the way it handles low signal areas, which is why I upgraded to the LG Spectrum plus I wanted Verizon 4G LTE.
scififan68 said:
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
Click to expand...
Click to collapse
I have tried this root and all I get is nothing, I am attaching what the root program says if anyone can help
kibbles-n-bits said:
I have tried this root and all I get is nothing, I am attaching what the root program says if anyone can help
Click to expand...
Click to collapse
I think I may have had the same issue and it turned out the root files didn't extract correctly the first time, so I deleted the root files and extracted them again and it worked. Of course I can't exactly remember it now, but its worth a try. EDIT: Wait no, it looks like root installed fine, are you on stock ICS or Gingerbread? As Gingerbread has special root tools that are different from ics, also make sure you have superSU installed and try the root checker from the playstore.
Will I be stuck in activation mode?
scififan68 said:
I think I may have had the same issue and it turned out the root files didn't extract correctly the first time, so I deleted the root files and extracted them again and it worked. Of course I can't exactly remember it now, but its worth a try. EDIT: Wait no, it looks like root installed fine, are you on stock ICS or Gingerbread? As Gingerbread has special root tools that are different from ics, also make sure you have superSU installed and try the root checker from the playstore.
Click to expand...
Click to collapse
New to the community and was hoping this was a good place for a related question. I have an exceed and I rooted without problem yesterday. I believe my SD Maid app deleted some important files or something because I stopped receiving incoming calls and texts. Anyway, I soft bricked my phone a few times and got the "Long time no see" message. I thought I unrooted my phone so I tried doing a hard reset thinking I would possibly fix the problem. That made matters worse. My soft brick became the only thing I could see no matter how many times I pulled the battery out and rebooted I was stuck at that screen. After hours of trying to get my pc to recognize my phone/get my phone in download mode, I finally fixed it and rooted again. Problem is that when I went through the unbrick process and flashed the kdz file to my phone, it was then stuck in activate mode. It wasnt a big deal because I just played dumb with verizon and they fixed it in their system being that when trying to activate it didnt give me the option to activate on my same plan/number. A bit annoying but better than nothing. My question is when I roll back to gingerbread or flash CM10 will I be stuck in activation mode again? Sorry for the long post, just figured I would give the what and why before my question!
derekpoole890 said:
New to the community and was hoping this was a good place for a related question. I have an exceed and I rooted without problem yesterday. I believe my SD Maid app deleted some important files or something because I stopped receiving incoming calls and texts. Anyway, I soft bricked my phone a few times and got the "Long time no see" message. I thought I unrooted my phone so I tried doing a hard reset thinking I would possibly fix the problem. That made matters worse. My soft brick became the only thing I could see no matter how many times I pulled the battery out and rebooted I was stuck at that screen. After hours of trying to get my pc to recognize my phone/get my phone in download mode, I finally fixed it and rooted again. Problem is that when I went through the unbrick process and flashed the kdz file to my phone, it was then stuck in activate mode. It wasnt a big deal because I just played dumb with verizon and they fixed it in their system being that when trying to activate it didnt give me the option to activate on my same plan/number. A bit annoying but better than nothing. My question is when I roll back to gingerbread or flash CM10 will I be stuck in activation mode again? Sorry for the long post, just figured I would give the what and why before my question!
Click to expand...
Click to collapse
You mean the activation screen, that you can quite easily bypass, also once it is is active it doesn't need to be activated again. Here is how to bypass activation https://www.youtube.com/watch?v=8WGKCdlnt1s
wow how did i miss that one!
scififan68 said:
You mean the activation screen, that you can quite easily bypass, also once it is is active it doesn't need to be activated again. Here is how to bypass activation
Thanks for the link. I apologize for not researching that better. CM 10 here i come!
Click to expand...
Click to collapse
I know this is an old post but I just snuck and rooted the girlfriends LG Lucid VS840ZV9 / 4.0.4 / software update version 6.3.0_B7
tonight using spectrum_root_windows
http://www.mediafire.com/download/on6cnik4h0fo697/spectrum_root_windows.zip
Hi,
I have a Pantech Flex P8010. I never thought it would be updated to jb. So I rooted it. Removed all bloated applications from it. Changed the recovery to CWM. I haven't taken any back up before the bloat removal. All I have is the cwm backup of the debloated version.
Now Pantech have released the jb ota. Oh well I never knew that this was going to happen ever.
I have a couple of questions.
Is there any way to update the phone to jb with the root privilege?
Is there any way to return to complete stock?
Will the recovery and bootloader image available in the forums be useful?
Any help would be really great help.
Thanks a lot.
hi
can someone pls upload or send me a stock rom for the flex i lose my backup when my sister mess with my computer
I think we should wait. You can make back up even now if your device is bootable..
What recovery u use? Clockworkmod?
Sent from my PantechP8010 using xda premium
anoopch said:
Hi,
I have a Pantech Flex P8010. I never thought it would be updated to jb. So I rooted it. Removed all bloated applications from it. Changed the recovery to CWM. I haven't taken any back up before the bloat removal. All I have is the cwm backup of the debloated version.
Now Pantech have released the jb ota. Oh well I never knew that this was going to happen ever.
I have a couple of questions.
Is there any way to update the phone to jb with the root privilege? No
Is there any way to return to complete stock?No
Will the recovery and bootloader image available in the forums be useful? Not Yet
Any help would be really great help.
Thanks a lot.
Click to expand...
Click to collapse
As it sits right now unfortunately we have no complete stock image to put back on the phone in order to restore it to a pure factory state. The factory restore on the phone does not affect the recovery only the data. In as much OTA updates are not available at this time and probably never since this phone is getting older. If you attempt to install the OTA update and get caught in the CWM bootloop simply start the phone in fastboot mode (I believe it is power + the volume down key on this phone) and choose the reboot option it will then skip the recovery and start the phone normally. Sorry I don't have any better answers for you. I'm hoping to land an HTC One in the near future...
I have the same problem :\ i removed all the at&t apps and the at&t software updater and when i go to update setting force close :,(
Backup Pantech Flex AT&T Apps
lopez_angel3 said:
I have the same problem :\ i removed all the at&t apps and the at&t software updater and when i go to update setting force close :,(
Click to expand...
Click to collapse
I also accidentally removed 1 too many of the at&t apps from my Pantech Flex using Titanium Backup. I am already running the 4.1.2 Jelly Bean update.
Would anyone out there be willing to use Titanium Backup to create 'backups' of the stock Pantech AT&T apps for us to recover with?
I'd be willing to pay for the Titanium Backup app as well as a bit for the time and effort.
Thanks!
Update to JB
Hi guys, maybe this was asked before, I want to know, now is possible to update to JB if I have a stock ICS? I know it was possible before but many peoples were facing a WiFi problem. I am on stock ICS, but would like to try JB.
CondriX said:
Hi guys, maybe this was asked before, I want to know, now is possible to update to JB if I have a stock ICS? I know it was possible before but many peoples were facing a WiFi problem. I am on stock ICS, but would like to try JB.
Click to expand...
Click to collapse
Yes. Go here. http://forum.xda-developers.com/showpost.php?p=46177375&postcount=462
attn1 said:
Yes. Go here. http://forum.xda-developers.com/showpost.php?p=46177375&postcount=462
Click to expand...
Click to collapse
Ok, thank you very much. Still, I have some questions if you don't mind. First I have to install CWM on my Flex, or is it already in my phone? If there is a tutorial that wil be nice, if not i will find somehow how to do it. I am just new to Android, my last phone was a Symbian one (Nokia C7) and it was pretty easy to install a new firmware on that one.
help needed Pantech flex wont boot or turn on
Soo i just picked up a like new pantech flex on the att carrier today.I've been searching online for hours about a problem im having. Will not charge,power on nor boot. Im kinda a noob I guess idk.ive done a little hands on with androids repairing and fixed a few galaxy s2s that needed stock roms put back on thats as far as I got. Now I bought the phone as is not working for $20 figured id give it a try..the condition is flawless and no signs of dropping or water damage at all.lady seller said she may have over charged the battery..idk please help if u know of any similiar problems with fixs.ive tried to connect it to my laptop running win7 it recognizes something upon plug in but states unrecognized usb device etc..I cannot find pantech flex drivers or any related help if anyone can please any advice appretiated
skillitmade said:
Soo i just picked up a like new pantech flex on the att carrier today.I've been searching online for hours about a problem im having. Will not charge,power on nor boot. Im kinda a noob I guess idk.ive done a little hands on with androids repairing and fixed a few galaxy s2s that needed stock roms put back on thats as far as I got. Now I bought the phone as is not working for $20 figured id give it a try..the condition is flawless and no signs of dropping or water damage at all.lady seller said she may have over charged the battery..idk please help if u know of any similiar problems with fixs.ive tried to connect it to my laptop running win7 it recognizes something upon plug in but states unrecognized usb device etc..I cannot find pantech flex drivers or any related help if anyone can please any advice appretiated
Click to expand...
Click to collapse
Have you tried the pantech PC suite for the drivers?
A while back when I first got my Verizon Note 2, I used Adam Outler's Casual method to root my phone to Stock. I don't mind stock and root mostly for the Tethering.
About a week back the OTA notice hit my phone. I have declined the notice/update twice giving myself time to look for the root update. I found this thread by Beans: http://forum.xda-developers.com/showthread.php?t=2518704 ........ It seems right but this thread by AdamOutler says not to use ODIN: http://forum.xda-developers.com/showthread.php?t=2045563
So I am a little confused. I just want the update but don't want to mess up and not have my tethering ever again.... or brick the phone.
As a newbie, it's a scary task. Someone please help point me in the right direction. I just want the 4.3 Stock. If there is a thread for my situation I couldn't find it. I search "casual TWRP 4.3 OTA" and other similar variations.
I can still get to the TWRP 2.5.0.0. I have also downloaded the ODIN and started it... looks simple, but there are no instructions.
Someone please help me...
Thanks
MrNewbie said:
A while back when I first got my Verizon Note 2, I used Adam Outler's Casual method to root my phone to Stock. I don't mind stock and root mostly for the Tethering.
About a week back the OTA notice hit my phone. I have declined the notice/update twice giving myself time to look for the root update. I found this thread by Beans: http://forum.xda-developers.com/showthread.php?t=2518704 ........ It seems right but this thread by AdamOutler says not to use ODIN: http://forum.xda-developers.com/showthread.php?t=2045563
So I am a little confused. I just want the update but don't want to mess up and not have my tethering ever again.... or brick the phone.
As a newbie, it's a scary task. Someone please help point me in the right direction. I just want the 4.3 Stock. If there is a thread for my situation I couldn't find it. I search "casual TWRP 4.3 OTA" and other similar variations.
I can still get to the TWRP 2.5.0.0. I have also downloaded the ODIN and started it... looks simple, but there are no instructions.
Someone please help me...
Thanks
Click to expand...
Click to collapse
Welp, couple things...
#1 - The link you posted above is the from the Note 3. You want this one http://forum.xda-developers.com/showthread.php?t=2578458
#2, The ROM gets flashed via CWM or TRWP like normal, it's only the radio update that gets flashed via ODIN. That shouldn't affect your current unlock/root status.
#3 - If it is only ROOT you are after, the 4.3 OTA is Rootable, just not unlockable. So if by chance you accidentally take the OTA you should still be able to ROOT and install your Tethering app. You just won't be able to unlock the bootloader and install a custom recovery/rom.
Jiggabitties said:
Welp, couple things...
#3 - If it is only ROOT you are after, the 4.3 OTA is Rootable, just not unlockable. So if by chance you accidentally take the OTA you should still be able to ROOT and install your Tethering app. You just won't be able to unlock the bootloader and install a custom recovery/rom.
Click to expand...
Click to collapse
So if you are OTA'd to MJ9, how do you unlock?
SteveHebe said:
So if you are OTA'd to MJ9, how do you unlock?
Click to expand...
Click to collapse
You cannot. Best bet is to not take the other and unlock your bootloader. If you take it you will probably be locked for a very long time.
Sent from my SCH-I605 using Tapatalk 2
michigan66 said:
You cannot. Best bet is to not take the other and unlock your bootloader. If you take it you will probably be locked for a very long time.
Sent from my SCH-I605 using Tapatalk 2
Click to expand...
Click to collapse
SteveHebe said:
So if you are OTA'd to MJ9, how do you unlock?
Click to expand...
Click to collapse
Correct, you cannot currently UNLOCK the OTA MJ9 boot loader. But you can ROOT. Which will allow you to tether.
Sent from my SCH-I605 using xda app-developers app
MrNewbie said:
A while back when I first got my Verizon Note 2, I used Adam Outler's Casual method to root my phone to Stock. I don't mind stock and root mostly for the Tethering.
About a week back the OTA notice hit my phone. I have declined the notice/update twice giving myself time to look for the root update. I found this thread by Beans: http://forum.xda-developers.com/showthread.php?t=2518704 ........ It seems right but this thread by AdamOutler says not to use ODIN: http://forum.xda-developers.com/showthread.php?t=2045563
So I am a little confused. I just want the update but don't want to mess up and not have my tethering ever again.... or brick the phone.
As a newbie, it's a scary task. Someone please help point me in the right direction. I just want the 4.3 Stock. If there is a thread for my situation I couldn't find it. I search "casual TWRP 4.3 OTA" and other similar variations.
I can still get to the TWRP 2.5.0.0. I have also downloaded the ODIN and started it... looks simple, but there are no instructions.
Someone please help me...
Thanks
Click to expand...
Click to collapse
I would think long and hard about taking the OTA...although root is available, you may want an unlocked bootloader at some point, and there is no guarantee that is coming to the official 4.3. My guess is that it will not simply because this phone is 18 months old and the skilled developers that put in the time to do things like unlock bootloaders move on to newer devices.
If you managed to use Casual in the past, Odin won't be a problem for you. Below are the steps:
Odin takes about 5 minutes total...its really easy.
Download Odin (it's just a simple windows program). - http://forum.xda-developers.com/atta...3&d=1304094576
Make sure you have the latest samsung drivers - http://www.mediafire.com/?hzlnda0l5t8qyes
Download and extract the firmware from the first post in this thread - http://forum.xda-developers.com/showthread.php?t=2578458
Save whatever 4.3 ROM you choose to your external SD card.
Power down the phone and boot back into download mode (volume down, power and home at the same time).
Open Odin, plug in phone...Odin should recognize the phone and you will see the com port noted in yellow.
Check the PDA box and put the firmware file (unzipped) in the PDA slot. Click start and 30 seconds later you are done. Phone will reboot into recovery at this point.
Then you can flash any of the 4.3 ROMs (including stock) in TWRP (I use 2.5.0.0 too). I have tried them all and Sophisticated 3.0 has worked the best for me...I will be trying beans 23 as soon as it is done.
tfly212 said:
I would think long and hard about taking the OTA...although root is available, you may want an unlocked bootloader at some point, and there is no guarantee that is coming to the official 4.3. My guess is that it will not simply because this phone is 18 months old and the skilled developers that put in the time to do things like unlock bootloaders move on to newer devices.
If you managed to use Casual in the past, Odin won't be a problem for you. Below are the steps:
Odin takes about 5 minutes total...its really easy.
Download Odin (it's just a simple windows program). - http://forum.xda-developers.com/atta...3&d=1304094576
Make sure you have the latest samsung drivers - http://www.mediafire.com/?hzlnda0l5t8qyes
Download and extract the firmware from the first post in this thread - http://forum.xda-developers.com/showthread.php?t=2578458
Save whatever 4.3 ROM you choose to your external SD card.
Power down the phone and boot back into download mode (volume down, power and home at the same time).
Open Odin, plug in phone...Odin should recognize the phone and you will see the com port noted in yellow.
Check the PDA box and put the firmware file (unzipped) in the PDA slot. Click start and 30 seconds later you are done. Phone will reboot into recovery at this point.
Then you can flash any of the 4.3 ROMs (including stock) in TWRP (I use 2.5.0.0 too). I have tried them all and Sophisticated 3.0 has worked the best for me...I will be trying beans 23 as soon as it is done.
Click to expand...
Click to collapse
Thank you so much. Updated and everything seem to work just fine, but after some use it started rebooting. I am going to put on Sophisticated as you suggested. Hopefully, it will be more stable then the stock ROM.
And I can't get the WIFI Tethering to work. Which Tethering app are you using? I have unlimited data... and need to make sure Verizon isn't charging me for no reason.
MrNewbie said:
Thank you so much. Updated and everything seem to work just fine, but after some use it started rebooting. I am going to put on Sophisticated as you suggested. Hopefully, it will be more stable then the stock ROM.
And I can't get the WIFI Tethering to work. Which Tethering app are you using? I have unlimited data... and need to make sure Verizon isn't charging me for no reason.
Click to expand...
Click to collapse
I had some reboots on the stock rom too...but once I went to the other roms (I tried Nephilium, Sophisticated and N3bula, but had the best results with Sophisticated) and I haven't had one reboot.
As for the wifi tethering, on stock you need to flash the file below (some of the newer roms, including Sophisticated have it baked in).
http://forum.xda-developers.com/showpost.php?p=48315091&postcount=245
IS anybody getting close to an unlock/root post VRUEMJ9 VZWi605 Note 2.
the reason I ask is I unrooted back to stock 4.1.1 and then picked up the VZW OTA 4.3 and now can't use Casual or any other method, I can root but not unlock bootloader. well anybody have any Ideas? thank you.
david515 said:
the reason I ask is I unrooted back to stock 4.1.1 and then picked up the VZW OTA 4.3 and now can't use Casual or any other method, I can root but not unlock bootloader. well anybody have any Ideas? thank you.
Click to expand...
Click to collapse
The reason you ask what? You didn't ask anything. And as it's been stated a million times, no unlock method avaliable and unlikely there will be one.
Sent from my SCH-I605 using xda app-developers app
akellar said:
The reason you ask what? You didn't ask anything. And as it's been stated a million times, no unlock method avaliable and unlikely there will be one.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Eh, he is one of those that puts the question in his title instead of the body of the reply. But as @akellar said, there is nothing available.
Thanks so much for all the help. I got everything working right based on the instructions from this thread. I initially had an issue with the "Wifi Tether" because I was using a 3rd party app. Instead the correct app is the "Mobile Hotspot" app. It might be named differently for other carriers, but for Verizon it is "Mobile Hotspot".
Again thank you for all the replies.
Thank you for Sophisticated v3.
Thank you Adam Outler for the original Casual root.
And Thank you runandhide05 for the "Mobile Hotspot" hack!
:good::fingers-crossed: LOL