Hi ,
i have updated the firmware on my nook tablet 16gb version for multitouch and when the device rebooted everythings up cept the screen is non responsive, i have CM 10.X ver 4.2.2 on the device and everything worked before so im guessing that something either went wrong or that this version doesnt support multi touch ?
anyways can you guide me as to how to either revert to old 2 point or get multi touch up completly ?
any links to tuts would be awesome thanks
spyder
To go back to 2-touch: you can burn one of Succulent's CM10 SDcard images (http://iamafanof.wordpress.com/2013/02/18/cm10-1-jellybean-android-4-2-2-for-nook-tablet-0218/) to SDcard, boot up CM10 on SD, then use the Touch FW Flasher app to revert back.
digixmax said:
To go back to 2-touch: you can burn one of Succulent's CM10 SDcard images (http://iamafanof.wordpress.com/2013/02/18/cm10-1-jellybean-android-4-2-2-for-nook-tablet-0218/) to SDcard, boot up CM10 on SD, then use the Touch FW Flasher app to revert back.
Click to expand...
Click to collapse
hi, i checked the link you sent me and the download is the same image i already have on my sd card. I am redownloading it now and will try it again. i believe i did something stupid . i used the firmware flashing tool without adding anything , i didnt download a file and add it to the directory i though it was already there and after the firmware flash the system auto rebooted , upon coming back up i had a totally non responsive touch screen, when i reboot to the main system BN stock os i got the same thing. i think i need to learn how to adb into the tablet and push the either MT firmware file or 2 point and flash it over ADB , is that possible and if so i could use some help , im not new to firmware flashing but on this tablet this is my first attempts,
thanks , i previously also read the MT firmware .zip instructions and saw that you are supposed to add it to the file structure on the tablet , this i did not do ,
any thoughts ?
thanks
OMG THANK YOU THANK YOU THANK YOU SO very very very much ! i did what you told me and its now responsive again i though i was doomed to crack it open to find the chip to manually flash you saved my bacon thank you
Related
Hi all
Just got my gtablet and installed a custom rom on it ( Vegan-Tab Ginger Edition )
All was fine till the famous " the process android.process.acore has stopped unexpectedly." I have tried to opening and disconnecting the battery, waiting for the battery to drain. etc. But to no avail
I followed the steps on NVflash to try to restore the firmware back to stock
I had the 1.2
at first, when i used NVflash, i manage to install the rom. However, when i power down the unit, it was unable to power up . Look thru the forum and found out that some of the user here also had this problem
Finally after 10 hours of trying, I manage to install this " alternate nvflash for gtablet zip file" from gtablet-for-dummiesl.
Now I am able to on and off as per normal.
However, I cannot get the system to enter CWM. Then every i press the on and the vol + , it just shows DETECT A RECOVERY KEY PRESS / BOOTING RECOVERY KERNAL IMAGE and it just hangs there forever.
When i connect the tablet to my computer , using the ES file explorer /SD card/ and a LOST.DIR
Will any kind soul out there.. please help. I am really at a total lost of what to do next
Thanks
Did you partition your SD card in CWM before installing vegan? It's part 1 step 7 of this tutorial:
http://forum.xda-developers.com/showthread.php?t=865245
and it's a critical to avoiding random FC's.
Sounds like you may want to get back to a stock baseline (via NVflash) and follow the tutorial above.
This site has many tutorials as well:
http://viewsonic-gtablet-for-dummies.webs.com/
Good luck!
1st what you will need to do is download this: http://forum.xda-developers.com/showthread.php?t=974422 what it will do is erase everything including any current rom and things on your device completely.
Then you must NVFlash after that to reinstall the stock ROM.
Hope this helps
Hi
1. Format the gtablet ( http://forum.xda-developers.com/showthread.php?t=974422)
DONE ! Now am I on 1.1 or 1.2 using the format.zip ?
2. Install CWM ( http://viewsonic-gtablet-for-dummies.webs.com/clockworkmod.htm ) - using the external SD card method for 1.2 rom ???
3. Clear / format data etc
4. Install ROM by using NVflash to either 1.1 or 1.2 ?
Are the steps correct ?
At this point just use code red on my start here page. Link in siggy.
What you originally did wrong was put the wrong cwm on the wrong branch.
BenziT said:
Hi
1. Format the gtablet ( http://forum.xda-developers.com/showthread.php?t=974422)
DONE ! Now am I on 1.1 or 1.2 using the format.zip ?
2. Install CWM ( http://viewsonic-gtablet-for-dummies.webs.com/clockworkmod.htm ) - using the external SD card method for 1.2 rom ???
3. Clear / format data etc
4. Install ROM by using NVflash to either 1.1 or 1.2 ?
Are the steps correct ?
Click to expand...
Click to collapse
1- After using the format the tablet should no longer be having a rom on it (not even stock rom)
2- NVFlash (Back to normal)
3-After NVFlashing you normally need to do an OTA update to 3588 which is the 1.1 bootloader
4- CWM Internal or External your choice REMEMBER TO PARTITION (2048 for first choice and 0 for the second)
5- Install the 1.1 rom of your choice
Please refer to this page for details on installing a custom rom: http://forum.xda-developers.com/showthread.php?t=865245
Please refer to this page for details on NVFlashing: http://forum.xda-developers.com/showthread.php?t=861950
BUT BEFORE GOING AHEAD AND DOING THIS PLEASE PLEASE PLEASE GO AHEAD TO GOODINTENTIONS WEB SITE THE LINK IS IN HIS SIGGY AND I THINK HE WILL HAVE WAYYYYYY BETTER AND SAFER INFORMATION FOR YOU
And remember step 4 partitioning is very important!!!!!! But thats as far as i know =/ I do not guaruntee this will work but I really hope it does.
Hope this helped
http://viewsonic-gtablet-for-dummies.webs.com/starthere.htm go to code red.
BTW your problem was you used the wrong clockworkmod for your branch
Thanks .
ok. I have formatted. And I have a red Magic value mismatch ( Which I presume is correct as I have formatted the drive )
Now, following CODE RED. I have downloaded stock Rom 1.1 branch zip with CWM pre-installed. Saved the file and unzip the folder ( BTW I am using windows 7 )
OK. I have created a folder with the stock rom 1.1 branch and the nvflash_windows_20100500.zip
UNzip both file and let it run
Rebooted to TNT. Now I think casue i have mess up my partition, it keeps showing " the application email ( process com.android.email ) has stopped unexpectedly. Please try again .
Understand I have to use CWM to repartition the internal SD.
However, now the problem is the same. I cannot get it to enter CWM by pressing the power and +
BenziT said:
Thanks .
ok. I have formatted. And I have a red Magic value mismatch ( Which I presume is correct as I have formatted the drive )
Now, following CODE RED. I have downloaded stock Rom 1.1 branch zip with CWM pre-installed. Saved the file and unzip the folder ( BTW I am using windows 7 )
problem is now i cannot find the .bat file from the unzip - Look for file in folder folder you just unzipped name "nvflash_gtablet.bat" and double click that. Watch as your computer nvflash your gtab. You should see some activity on your gtab screen.
Click to expand...
Click to collapse
try re downloading it, unzipping it, then search for it
glad i could help
BTW follow this link it really helps: http://forum.xda-developers.com/showthread.php?t=861950
Hi jjkoolj8282,
Problem is now because of the partition i keep getting error and there is no way for me to get into CWM
once I power off my gtablet, I will not be able to power it on again
Was wondering is there anyway for me to repartition the internal SD before installing the ROM
I have tried using
Part III - NVFlash for the few. (Most of you will ignore this part)
For some people there are some incompatibilities with the nvflash for windows files in Part B. If you are one of the unfortunates who have done Part B and got an error, then use the alternate nvflash for gtablet zip file. Follow the same procedure in Part B, but replace the file in step 1 with this file.
with NVflash for windows and it allows me to turn on and off the gtablet
However, there is no CWM
How do I get CWM onto this so that I can repartion the internal SD ?
Please help
hmmm. the partition should if anything help....
i cannot stress enough
1- make sure you are on 1.1 and make sure you installed cwm v08
if you are on 1.2 you must have this: http://forum.xda-developers.com/showthread.php?t=1125379 you must nvflash if you find out you are on the wrong cwm
and 2- the partition is after NVFlash and before the custom rom and the sizes are 2048 for the first choice and 0 for the second
NVflash again (i know annoying) check you bootloader and then install the correct CWM.
if all else fails go to goodintentions website and then over to code red and maybe even double red
the part you added to your post is out of my league....but i saw the power on problem somewhere else....i'll give you a link if i find it which i will look now
hi
As you mentioned , I have formated it. Thus I am neither on 1.1 nor 1.2 . Am I correct ?
I have chose the 1.1 with CWM
How do i enter CWM before it boots into TNT ?
Really appreciate your help
BenziT said:
hi
As you mentioned , I have formated it. Thus I am neither on 1.1 nor 1.2 . Am I correct ?
I have chose the 1.1 with CWM
How do i enter CWM before it boots into TNT ?
Really appreciate your help
Click to expand...
Click to collapse
once you formatted it you must nvflash it (i may be repeating myself but i am sharing what i would do) follow this: http://forum.xda-developers.com/showthread.php?t=861950 so you are back to the stock ROM
and from there you should be able to put CWM on the correct bl
cwm entering is entered by holding the power button with the volume + button simutaneously and you will see recovery key detected
WOW !! at long last.. manage to enter CWM.
Tried using the double code red. pressing the + button while it was NVing and + button before it loads into TNT
IT shows clockwork recovery v2.5.11 bekit 0.8
Is this the version 8 ? the latest one ?
YES> !!! it booted up nicely after doing the repartition and fix permission !!!!
Sorry for noob question
Hope my luck last..
It is probably on 1.1 since it booted into CWM 08 which is also 8
It is not the latest one, you dont want the latest one. the reccomended version is the one you are on
and if something goes wrong....again lol
just NVFlash and try again. this stuff is hard work xD
yupe. really hard work..
after 20 hours of work !! and mostly importantly..
GREAT HELP from u guys !!
The reason i wanted a gtablet was to get hands on. did not expect it to be such a BIG JOB !!
really glad it works now !!!
Thanks again
connected to wifi and asked me to update to 1.1-3588
should i do it ?
BenziT said:
yupe. really hard work..
after 20 hours of work !! and mostly importantly..
GREAT HELP from u guys !!
The reason i wanted a gtablet was to get hands on. did not expect it to be such a BIG JOB !!
really glad it works now !!!
Thanks again
connected to wifi and asked me to update to 1.1-3588
should i do it ?
Click to expand...
Click to collapse
you can't believe how happy i am for you lol
yes update to 1.1-3588 but not further!!!!!!
then most roms are compatible with your bootloader, which after you updating it is 1.1
but always check for the bootloader information about a rom
if you have any more problems just PM me and always remember how to NVFlash because it'll come in handy.
Thanks thanks
I really thought that my gtablet was going to be a paper weight
Will play around with the 1.1 before deciding again to take the plunge to flash a new 1.1 rom .
What do you recommand ? TNT lite ?
BenziT said:
Thanks thanks
I really thought that my gtablet was going to be a paper weight
Will play around with the 1.1 before deciding again to take the plunge to flash a new 1.1 rom .
What do you recommand ? TNT lite ?
Click to expand...
Click to collapse
TNT lite is a very good ROM, but my personal favorite is Vegan Tab 5.1 which is a froyo ROM . The only difference is pretty much looks, but TNT Lite is retired so it is hard to get unless you already have it.
Thanks . Will try the Vegan tab in a while
It always baffles me how a hand full of people get problems that I can't for the life of me replicate. I must admit that, sometimes, I doubt these problems really do exist. Can anyone (preferably a tech or a dev) confirm that these problems really do exist?
Hi there.
It seems that I can't help myself anymore.
Got a prime with JB bootlader 10.4.2.18 and TWRP 2.4.3.0 on it.
Flashed SuperSU using TWRP and, after that, tried to flash
ParanoidAndroid for my device. (pa_tf201-3.10-07MAR2013-190411.zip)
Right after starting the flashing procedure TWRP seems to crash.
(It immediately shows it's splash screen again and gets laggy.)
I also tried other TF201-JB-ROMs but it happens with any of them!
I can access TWRP and Fastboot! But I got no ROM on the device
and aint able to flash one.
After hours of searching and reading it still looks like a Option 3 brick
to me and I don't know what to do next.
Some ppl tell to write the original blob from Asus' 10.4.2.18 stock rom,
others advise against that because it will get hard-bricked. I'm stuck.
Any ideas?
Seems to be solved.
Instead of using my MicroSD-card to install the new ROM I now just
used ADB to transfer the file directly onto the device.
It worked fine for cm-10.1-20130308-UNOFFICIAL-tf201.
I'll try AndroWook_Hairy_Bean_v1.51_FINAL tomorrow, or shouldn't I?
trust me andro wook HB 1.51 is the best at all !
i tried each and every one of Roms and no one can beat HB !
if u can live without changing themes or multi user features Andro Wook is best choice for u ...
must annoying issue in other none stock based Roms is that no one of them can play movies in HW acceleration mode . ( image quality will be very lower in other modes )
u should wipe system before flashing new Roms (specially after CM Roms ) ...
its a little risky but best results will come from it !
sorry for my terrible english
marleng said:
Seems to be solved.
Instead of using my MicroSD-card to install the new ROM I now just
used ADB to transfer the file directly onto the device.
It worked fine for cm-10.1-20130308-UNOFFICIAL-tf201.
I'll try AndroWook_Hairy_Bean_v1.51_FINAL tomorrow, or shouldn't I?
Click to expand...
Click to collapse
Hello. The problem is with twrp 4.2.3.0 version. Push 4.2.2.0,your problem will end.
Hi all
ok so i'm a bit nervous writing this expecting all manner of attack in that i may be posting something that's been posted before lol, i've been working on this phone from start to finish about 9 hours, over two days..... i've googled just about every combination of words to do with the title and everything in between but nothing seems to come close to what i actually need to do as nothing works
i have an LG Optimus 2x / p990, it had ICS on it but was far too slow to handle this, it needs something a bit less hardware intensive to run smoothly, so i went ahead an found cyanogenmod stable ...... 7.2 i installed sdk after an hour of finding out how it works i finally got adb and fastboot working, i then needed this, that, this, that, etc etc etc.....
to cut a 9 hour story short, i've managed to get myself to the point where i wiped the phone of everything but CWM partioned for ics via the AIO software but CWM will not let me install any ROM onto the phone. to be more precise it says i have installed CM 7.2 successfully! (i've tried this via the CWM via external SD card and sideload) i reboot the phone it's as if i've never done a thing, no trace or suggestion i've even attempted it on the internal card... nothing
i'm at the point now where i'm quite happy to just have my phone back now and install ICS 404 but can't use the LG kdz install software as the pc doesn't see the phone as an LG p990 because it's recovery and i can only get it to come up as internal and external memory cards
i'm not really a noob when it comes to tech stuff but this little phone has me stumped.... please, i'm begging you, help me any operating system that can get my phone working will do, preferably the CM 7.2 if not back to ICS 404?
and i know, i know i should have backed up but i had no idea it could be so complicated just to put an OS on a tiny computer
ETA i've tried that exitrecovery.zip thing and it did nothing :/
It's quite simple
Try to reset and unroot/re-lock the phone then unlock and root, then what you need to do is get ROM Manager and get the Clockwork Recovery and the version that supports your device, although you might need to hook up your phone to your computer for the process to work.
Also put back in ICS 4.0.4 when unrooted and re-locked again like stock and make sure it's the stock file for your phone.
And after you got ROM Manger and the Clockwork Recovery
Then just in Clockwork wipe out all data on the device and don't do a factory reset in Android just with clockwork and delete everything that was made on that phone then install CyanogenMod.
After that it will seem to take a long time or just a while to boot up and then it boots faster then the original ROM.
If you have Clockwork Recovery just wipe out all the data while it's still in there and you should be set.
When it was my first time putting in CyanogenMod it was 10.1 RC1 on my Nexus 7 and it didn't work and forever bootlooped, and that was because i forgot to wipe the device. Then after going into Recovery with Clockwork I deleted all the data of my tablet and it worked but took 5 mins. to boot up which is nomal.
And if Clockwork doesn't work, do the same with TWRP (Team Win Recovery Project) and download that which can be found here teamw.in/project/twrp
If you don't want to get ROM Manager or that one isn't working then try this website to get Clockwork because it has the whole list of devices and I recommend downloading from the website instead of their app. clockworkmod.com/rommanager
cheers for that, i've tried all of the above still to no avail, having a think about it the phone is partioned for ics, i'm trying to install CM 7.2 which as i understand isn't ICS so.... maybe the error is that it's a different partioning sequence/setup i'm gonna go for CM 10.1 and see if that makes a difference.
to add i'm not sure why everyone rants and raves about CWM, TWRP seems much more complete and advanced do you (or anyone else) know the main differences?
twelfty said:
cheers for that, i've tried all of the above still to no avail, having a think about it the phone is partioned for ics, i'm trying to install CM 7.2 which as i understand isn't ICS so.... maybe the error is that it's a different partioning sequence/setup i'm gonna go for CM 10.1 and see if that makes a difference.
to add i'm not sure why everyone rants and raves about CWM, TWRP seems much more complete and advanced do you (or anyone else) know the main differences?
Click to expand...
Click to collapse
TWRP has a completely touch driven interface that is 100% themeable, while CWM has a touch version and non-touch version. Also TWRP has a built in file manger and terminal emulator where as CWM does not. A lot of people like TWRP because it provides a lot of good features with a simple and straightforward yet powerful user interface. I would recommend taking a look at this guide if you want more information on the differences between the two http://www.droidiser.com/2013/04/twrp-vs-clockworkmod-recovery.html?m=1.
Sent from my SCH-I535 using xda premium
ok i managed to do it i can't remember exactly how but some good links and info for anyone who stumbles across this in need of help
i went for cyanogenmod 10.1 to make this work i used this AIO tool - http://forum.xda-developers.com/showthread.php?t=2020737
repartioned with OLD partion layout and BL
installed TWRP (included in the aio)
if you need to reinstall the google play store make sure you have right version if you flash it and get "unfortunately setup wizard has stopped" repeatedly you have the wrong version see this link for which one you need http://wiki.cyanogenmod.org/w/Gapps
obviously make sure you have adb and fastboot setup and drivers too.... it's a long process installing the entire sdk, personally for flashing this once and most definately not inclined to do it again i'd go with just the adb and fastboot rather than the whole sdk
also i found a keyboard error with 10.1 where i'd type 1,2 or 3 characters and the keyboard would minmise not sure if there's a proper fix (i found one thing where you disable the autocorrect but didn't want to do that) so i decided to download and install hackers keyboad which is based on the gingerbread keyboad and is much better and comes with full features and integrates nicely
coupled with the info above from YoyoscratchMC and you should be in the field
good luck to all i was ready to jump out my window with my phone first so i could land as hard as possible on it last night but i got there in the end lol
Hello, thanks for taking a look.
My Eken a90 clone is now merely lighting the backlight of the display and not much else.
My unmodded device went into boot loop after I uninstalled an apk & I decided then was a good time to finally look into rooting it and installing custom firmware as the factory firmware is not available for download from the manufacturer. First I flashed cwm6028-a10-9part-v2.zip and I was able to boot into cwm. Then I flashed cm10_a10_20121011.zip and CM10 installed wonderfully and I was thrilled. Next I was supposed to flash gapps-jb-20121011-signed.zip but did not. I had confused myself and mixed up my steps. Instead I flashed t02_compatibility_1.2.0.zip which may not have been the compatability zip I even needed. I did not realize my error until it was too late and now the device has no display and I cannot enter recovery. I can push files but I cannot flash to it. I have tried pushing the cwm & cm10 .zips to sdcard but this has had no effect I felt I should ask for help. Though I have used android devices for years, this is my first experience with custom firmware.
Rodchenko said:
Hello, thanks for taking a look.
My Eken a90 clone is now merely lighting the backlight of the display and not much else.
My unmodded device went into boot loop after I uninstalled an apk & I decided then was a good time to finally look into rooting it and installing custom firmware as the factory firmware is not available for download from the manufacturer. First I flashed cwm6028-a10-9part-v2.zip and I was able to boot into cwm. Then I flashed cm10_a10_20121011.zip and CM10 installed wonderfully and I was thrilled. Next I was supposed to flash gapps-jb-20121011-signed.zip but did not. I had confused myself and mixed up my steps. Instead I flashed t02_compatibility_1.2.0.zip which may not have been the compatability zip I even needed. I did not realize my error until it was too late and now the device has no display and I cannot enter recovery. I can push files but I cannot flash to it. I have tried pushing the cwm & cm10 .zips to sdcard but this has had no effect I felt I should ask for help. Though I have used android devices for years, this is my first experience with custom firmware.
Click to expand...
Click to collapse
hey dont worry this tablet its almos unbrikable you just need this program LiveSuitPack_v1.07 on your pc, and find the original rom from your tablet and flashed
spideyjab said:
hey dont worry this tablet its almos unbrikable you just need this program LiveSuitPack_v1.07 on your pc, and find the original rom from your tablet and flashed
Click to expand...
Click to collapse
Thanks for that. I downloaded and installed it, drivers and all. Now I'll be good to go if I can find a suitable factory img. I have access to a second unmodded tablet of the same model, perhaps I can get an img file from it somehow.
Lost wifi again! was doing the normal backup and return to stock again to get the wifi back and it packed up on me, no longer accepting touch input. So I am stuck can't try to reload it, in the hope its software. right now its version 2.0.5 or something like that. Can't use the recovery since the touch is not working. Is there any working non-touch recoverys or is there a stock like firmware that can be loaded with out twrp touch. I still can fastboot flash the recoveries none work I have tried all the twrp version I could find.
I can plug a mouse in with a usbtg adapter but that is not useable in twrp.
I have opened it up to make sure a cable was not loose on the screen, and it was not dropped or broken in anyway.
Anyone who can hear my call HELP!
theskyisoutthere said:
Lost wifi again! was doing the normal backup and return to stock again to get the wifi back and it packed up on me, no longer accepting touch input. So I am stuck can't try to reload it, in the hope its software. right now its version 2.0.5 or something like that. Can't use the recovery since the touch is not working. Is there any working non-touch recoverys or is there a stock like firmware that can be loaded with out twrp touch. I still can fastboot flash the recoveries none work I have tried all the twrp version I could find.
I can plug a mouse in with a usbtg adapter but that is not useable in twrp.
I have opened it up to make sure a cable was not loose on the screen, and it was not dropped or broken in anyway.
Anyone who can hear my call HELP!
Click to expand...
Click to collapse
You can use open recovery script to still use TWRP without touch. So you are saying you have no touch in Android or TWRP right? What happened right before the touch stopped working?
attempted to unroot
aicjofs said:
You can use open recovery script to still use TWRP without touch. So you are saying you have no touch in Android or TWRP right? What happened right before the touch stopped working?
Click to expand...
Click to collapse
I attempted unroot as I have had to do before to get wifi back working. I did a wipe and restore the factory firmware then reset to do that whole wifi issue fix process and poof no more touch in either place but I can hook up a mouse in the android system. I can go in to twrp but the only twrp for this is touch. I am almost positive that my restore to factory backup was bad /corrupt because that's when it happened. Also the firmware verson also the apps and all were not removed so I am assuming it went bad doing the firmware. I don't care about loosing things. I have stock firmwares but can't load it. IF I had a non touch way to replace the firmware I think that would fix it all.
Anyideas how to push a firmware for that nabi 2 deal. or a place I can get the .win image to push it (if that would even work) I have a 19. something .win one but I tried to push it and it writes but does not apply it even after factory reset following that. Just stuck here now.
theskyisoutthere said:
I attempted unroot as I have had to do before to get wifi back working. I did a wipe and restore the factory firmware then reset to do that whole wifi issue fix process and poof no more touch in either place but I can hook up a mouse in the android system. I can go in to twrp but the only twrp for this is touch. I am almost positive that my restore to factory backup was bad /corrupt because that's when it happened. Also the firmware verson also the apps and all were not removed so I am assuming it went bad doing the firmware. I don't care about loosing things. I have stock firmwares but can't load it. IF I had a non touch way to replace the firmware I think that would fix it all.
Anyideas how to push a firmware for that nabi 2 deal. or a place I can get the .win image to push it (if that would even work) I have a 19. something .win one but I tried to push it and it writes but does not apply it even after factory reset following that. Just stuck here now.
Click to expand...
Click to collapse
If you have touch in Android install this https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager push your backup and use the program to make the open recovery script for you.
no touch anywhere. and no wifi!
Like I said no wifi and no touch at all anywhere So going online Iis a no go. I can use a mouse on the android system. Also I beleve my backup firmware is what caused the issue with the touch. Again this is a nabi 2 so now its been reset no file manager either access a apk from the sdcard if I could get the apk for that.
update
browser loaded the twrpmanager apk with that installed stock image now wifi works but no touch still what am I missing with the touch? Trying the stock update to see if that corrects anything I doubt it though
over post sorry
I know I am over posting on my own thread... sorry about that.
Had a thought. Since I am not great at describing what I need to accomplish here, try to work with me on this.
I need to just complete start over GO FOR BROKE format and push out the rom with adb How can I get started to do this and what do I need?
I feel that something in the touch input is not working based on some part of the rom is hosed. even tried the original recovery gives that android error icon thingy and I see nothing till she restarts nothing changes.
OK if you want to go for broke... You have to have an external SD card for this. TWRP must be installed
Hook Nabi up via USB can be in Android or TWRP
1) Download this: Nabi 2 stock
2) Unzip the NABI2STOCK.zip
3) Go here: http://forum.xda-developers.com/wiki/Fuhu_nabi_2
4) Grab either the 2.0.5 or 2.1.27 stock rom
5) Put the downloaded ROM zip in the "install" folder that was made in #2. Dont unzip, just download it straight to the install folder
6) Run 205.bat or 2127.bat depending on which ROM you chose.
The script will extract the ROM from the zip, copy the stock ROM to your external SD card, create an openrecoveryscript that will format system, format data, and restore Boot and System partition. Data will be left blank. This erases everything, except hidden partitions and recovery partition.
downloading will update when its done
downloading now will update when I run it. I hope things fixes it. as I have hosed it so far.
I get an error
I get an error
mkdir: can't create directory /external_sd card/twrp/backups/015d2a50211c1a19/abcdstock or something like says directory does not exist odd error it went thought its cycle and exited after that.
I do have an external sd card in it and it is working. did not know if that was an sd card error or what
no touch still
sadly no touch still.
Should I assume its hardware now? or do I have any hope its software?
The version and all changed so I know it did something but no touch
theskyisoutthere said:
sadly no touch still.
Should I assume its hardware now? or do I have any hope its software?
The version and all changed so I know it did something but no touch
Click to expand...
Click to collapse
It seems hardware now, but it is odd that touch went out when you were doing things to it. Still under warranty? Have you taken it apart and seen if anything is wrong?