ok so was riding on a kayak, flipped but i held the phone above the water the whole time...guess got some water because of the splash, but the 2 water indicators i see, on battery and under are fine. left the phone in rice for 12 hours. tried turning on and screen flickers some green multi color. i can tell it works, plug in charge led changes, volume buttons work, i can swipe up on screen.
anything i could do?
im rooted, should i have any concerns returning for warranty? if so, anyway to return to stock with screen not working? like i said phone looks like it behaves normal, blue led when starting, charging led when plugged in, volume keys work, can swipe up on screen etc.
thanks
Related
Hello,
I've got an HTC Amaze that's been rooted, but done fine for a few weeks/months, at first it's battery seemed to be the problem, and after replacing it things were normal. Now, the phone doesn't seem to respond or give any sign of life until its plugged in, and the only thing that changes is that the orange light glows. When unplugged the light remains on, but the screen is always dark, yet each of the buttons on the touch screen's face (home, settings, back, search) make the phone rumble when touched and I can access all the files from my laptop. It's functioning, I just can't see anything, no water damage, and no recent falls before it went dark.
It's not a bad usb, but can someone help me fix it?
Yesterday, my phone fell (not very hard, onto a carpeted floor). I picked it up and put it in my pocket without looking.. When I went to check my phone, it was off. I tried to turn it on, but it would only go to the HTC screen, then the screen would go black but the home icons would be lit up. I took the battery out and let it sit for a couple of hours. Tried to put it back in and the phone wouldn't turn on at all. I put it on the charger, it turned red for about 5 seconds, turned off, then repeats. If I try to turn the phone on, the LED light blinks a very dim red for 2 seconds then stops. I can't even hold the volume button and the power button, it just blinks the dim red. As far as I know, it is not rooted. I got it second hand about a year ago after my phone got stolen. I have never had any problems with it other than the camera.. It just stopped working eventually. Help?
Anytime you drop the phone, even if it wasn't a hard hit, it can damage something on the main board, which could be your problem. However, since you say the led is very dim red, that is a sign that the battery itself is damaged and won't charge. I would try to get a cheap battery off ebay to see if that's the problem.
You probably damaged some micro vital componants on your motherboard which is preventing your device to function in a normal way.
must be motherboard, or some other chip
Hi All,
I was out a couple of days back and my battery died. No trouble, come back home and charge it up. Worth noting that in recent months battery performance has been poor with a full charge only lasting about 8hours or so. I put this down to a new ROM I flashed as well as natural deterioration (18 month old S3).
Plug into the wall, red charging LED comes on, but the battery splash screen does not. Tried another charger...same. Thinking nothing of it I go to bed and wake up next morning to be greeted by a green charging LED. However, still no battery splash screen. I try to boot...it doesn't. When I "power on" the bottom LED buttons do light up white and go off after a few seconds. When I press the hold button again, they also come on for a few seconds. If i press the hold button while the button LEDs are on, they go off.
This makes me think the screen has broken as both the hold button and the charging LED is doing what it would do...but without any screen activity. However, it was not dropped or put under any pressure in any way. I have opened it up and also made sure the ribbon is undamaged and connected properly. I have tried calling the phone to no avail. It also does not vibrate or make any noises. Perhaps the battery doesn't have enough juice? Its as if its on the battery splash screen, I just cant see it.
I should mention the screen is infact cracked from an incident about 6-8 months ago. It was however, fully functional. Presumably, this will unfortunately stop me from sending it in. It was also using a flashed rom (CM11) and a flashed kernal (Boeffla).
I used a multimeter and measured 3.96v across the battery so that's fine. I can't test the current as I cant break into the S3 circuit and I dont have a resistor on hand to put some load on it.
Next steps?
adamscybot said:
Hi All,
I was out a couple of days back and my battery died. No trouble, come back home and charge it up. Worth noting that in recent months battery performance has been poor with a full charge only lasting about 8hours or so. I put this down to a new ROM I flashed as well as natural deterioration (18 month old S3).
Plug into the wall, red charging LED comes on, but the battery splash screen does not. Tried another charger...same. Thinking nothing of it I go to bed and wake up next morning to be greeted by a green charging LED. However, still no battery splash screen. I try to boot...it doesn't. When I "power on" the bottom LED buttons do light up white and go off after a few seconds. When I press the hold button again, they also come on for a few seconds. If i press the hold button while the button LEDs are on, they go off.
This makes me think the screen has broken as both the hold button and the charging LED is doing what it would do...but without any screen activity. However, it was not dropped or put under any pressure in any way. I have opened it up and also made sure the ribbon is undamaged and connected properly. I have tried calling the phone to no avail. It also does not vibrate or make any noises. Perhaps the battery doesn't have enough juice? Its as if its on the battery splash screen, I just cant see it.
I should mention the screen is infact cracked from an incident about 6-8 months ago. It was however, fully functional. Presumably, this will unfortunately stop me from sending it in. It was also using a flashed rom (CM11) and a flashed kernal (Boeffla).
I used a multimeter and measured 3.96v across the battery so that's fine. I can't test the current as I cant break into the S3 circuit and I dont have a resistor on hand to put some load on it.
Next steps?
Click to expand...
Click to collapse
Try to put it in odin mode (power+vol down+home then press vol up to agree that you are now in odin mode). You should see it in odin.
If you dont see it, your battery or energy system of your phone is broken. Otherwise your screen is probably broken?.
_Beni_ said:
Try to put it in odin mode (power+vol down+home then press vol up to agree that you are now in odin mode). You should see it in odin.
If you dont see it, your battery or energy system of your phone is broken. Otherwise your screen is probably broken?.
Click to expand...
Click to collapse
I've managed to get it into download mode and too show up in odin. I can also get it to show the files in Windows if i wait after holding the power button.
This all indicates it is in fact booting up and the screen is broken...
...BUT...no sound...no vibration...and no calls received
Its as if its only half on. Beginning to suspect a catastophic motherboard failure. Is it possible the battery is at fault? Its as if a whole power rail providing for the phone receiver, loudspeaker, vibrator and screen has gone.
adamscybot said:
I've managed to get it into download mode and too show up in odin. I can also get it to show the files in Windows if i wait after holding the power button.
This all indicates it is in fact booting up and the screen is broken...
...BUT...no sound...no vibration...and no calls received
Its as if its only half on. Beginning to suspect a catastophic motherboard failure. Is it possible the battery is at fault? Its as if a whole power rail providing for the phone receiver, loudspeaker, vibrator and screen has gone.
Click to expand...
Click to collapse
Can you try this?
https://www.google.com/android/devicemanager
and let it ring?
I just got my new Kingzone K1. Charged battery and then booted phone, after a few minutes the screen just started getting dim. Has a faint glow if held in dark area. I have tried Volume+ and power button and will not do anything but a slight vibrate and the dim screen. I have the phone plugged into the charger. Phone has solid green light. I don't know if this means it is charged or is charging. The only thing I know to do is send it back unless someone has ideas on getting it started or factory reset.
Thanks
My galaxy S3 is showing a very weird problem. I was using the phone and before reaching home the battery when completely flat. When I arrived home and plugged the phone to the wall charger the screen remains dark, black. Now the battery is full charged (green light) but the screen remains to the same estate. When someone calls me the phone rings. When I plug it to the computer I can see the files inside the different drives. I reinstalled the OS that is 4.3 but still same problem. I didn't drop the phone and It didn't have any shock.
That is weird. I am thinking of a dead screen but before going for a chirgucal operation on my beloved phone I wanted to ask if that couldn't be a software problem.
Happy to hear from your experiences.
Boot into download mode, volume down + home then power button. If the screen is dead in download then it is hardware.
jacdem said:
My galaxy S3 is showing a very weird problem. I was using the phone and before reaching home the battery when completely flat. When I arrived home and plugged the phone to the wall charger the screen remains dark, black. Now the battery is full charged (green light) but the screen remains to the same estate. When someone calls me the phone rings. When I plug it to the computer I can see the files inside the different drives. I reinstalled the OS that is 4.3 but still same problem. I didn't drop the phone and It didn't have any shock.
That is weird. I am thinking of a dead screen but before going for a chirgucal operation on my beloved phone I wanted to ask if that couldn't be a software problem.
Happy to hear from your experiences.
Click to expand...
Click to collapse
never heard this type of problem
try to go into recovery and check if it displays anything
If successful do factory reset
In download mode i can see nothing. That is really weird. I am letting the battery drain completely and i will check. Thank you for your replies
I wanted to upgrade so far what i am getting. The screen while dark, black is reacting to touch actions: for exemple when i lock the phone with the power button i can hear the lock sound;when i unlock with the lide action on the screen, I can hear the unlocking sound. I think that must be a weird system problem. If the screen was broken will it react to such touch actions?
Lide=slide. I can actually take a call with the slide action on the screen. When someone calls me i just have to slide my finder at the proper place on the screen to take the call. I need help please.
Most probably its the hardware. Your LED seems to be ditching you. And yes a bad led can still response to touch despite of being black all the way. Actually it's the digitizer that responds to the touch NOT the LED itself.
In your cas3 so far from your feedback I can say that you are having a bad LED everything else including the digitizer is working well.
Sent from my GT-I9300
Thank you i w
ill try it check it tomorrow. I will try to install another firmware, may be 4.0.4. The one i was using i just installed it 2 days ago.