Hi Guys
My S2 never working at all , i don't know if my phone got Soft bricked or hard bricked
anther point , when i connected the phone to charger i feel warmly at the top and around camera at the back
Softbrick = software issue
Hardbrick = hardware issue
You say your phone doesn't work at all.....
A few questions.....
1) can you get into recovery?
2) can you get into download mode?
3) do you get an image of a charging battery when you plug the charger in?
If the answer to the above is 'no, no and no' then you have a hardbrick.
And the options available are (if under warranty) take the phone to samsung for repair.
If out of warranty. ....
Jtag....might work
Replace the motherboard with a board sourced from either a broken donor phone or a new board sourced 'elsewhere'
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
keithross39 said:
Softbrick = software issue
Hardbrick = hardware issue
You say your phone doesn't work at all.....
A few questions.....
1) can you get into recovery?
2) can you get into download mode?
3) do you get an image of a charging battery when you plug the charger in?
If the answer to the above is 'no, no and no' then you have a hardbrick.
And the options available are (if under warranty) take the phone to samsung for repair.
If out of warranty. ....
Jtag....might work
Replace the motherboard with a board sourced from either a broken donor phone or a new board sourced 'elsewhere'
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
all answer no
but when i plug the charger in , the phone Becomes hot at the top , maybe Buttons didn't work ?
up up up
plz
Bricked mate
andrewwright said:
Bricked mate
Click to expand...
Click to collapse
Jig USB will be fixed it ? or not ?
Can try but prob not mate
andrewwright said:
Can try but prob not mate
Click to expand...
Click to collapse
Thanks , i will trying Jig or Jtag if Jig didn't fix
Good luck hope you sort it.
Heat near the camera + no boot = brick
Sent from the little guy
as an update :
Riff Box didn't Revive my phone , also i tried USB Jig
i can't Exchange Motherboard because i need my data .. , So may Power IC damaged ?
No mate...afraid not.....you defo have a brick......
Data likely to be unrecoverable ..
Also because JTAG has been used, warranty is now void.........
Sent from either my S2 or my W via XDA developers app
keithross39 said:
No mate...afraid not.....you defo have a brick......
Data likely to be unrecoverable ..
Also because JTAG has been used, warranty is now void.........
Sent from either my S2 or my W via XDA developers app
Click to expand...
Click to collapse
must i replaced motherboard ?
my phone out of warranty ..
hmmm , i've see this : http://www.youtube.com/watch?v=ce0bCRnY_A0
So , do i replace Power ic before change motherboard ?
You *could* try that....but I wouldn't count on it fixing the problem....and it could end up causing other issues.......
And for info.....The warranty on Samsung phones is 2 years......
Sent from either my S2 or my W via XDA developers app
keithross39 said:
You *could* try that....but I wouldn't count on it fixing the problem....and it could end up causing other issues.......
And for info.....The warranty on Samsung phones is 2 years......
Sent from either my S2 or my W via XDA developers app
Click to expand...
Click to collapse
ok Thx , i'll do that
and my warranty just one year , i bought it since 2011
mobo change.
Sent from the little guy
Related
Hi there Galaxy s2 owners
I was woundering ive had the galaxy s2 for a few days now and recently i flashed chains unsecure kernel, now the thing i noticed is that every time u flash somthing that count goes up. Does any of you Devs know how to reset this counter if so all help would be greatly recieved.
BRONSON29 said:
Hi there Galaxy s2 owners
I was woundering ive had the galaxy s2 for a few days now and recently i flashed chains unsecure kernel, now the thing i noticed is that every time u flash somthing that count goes up. Does any of you Devs know how to reset this counter if so all help would be greatly recieved.
Click to expand...
Click to collapse
solution found by me ur post showed up when I was posting my thread.
look here
dh2311 said:
solution found by me ur post showed up when I was posting my thread.
look here
Click to expand...
Click to collapse
Thanks a lot for this info
can someone explain why the counter going up is a bad thing?
Sandwiches said:
can someone explain why the counter going up is a bad thing?
Click to expand...
Click to collapse
It is not a bad thing, if you have no problems with your phone.
You can ignore the counting, but if you have a problem and need warranty service from Samsung, they will charge you for the repair as flashing or changing the firmware other then through official means i.e. kies, your warranty is considered null and void.
Phone repairs can sometimes be expensive.
On latest 2.3.4 USB jig will not reset the counter .
jje
JJEgan said:
On latest 2.3.4 USB jig will not reset the counter .
jje
Click to expand...
Click to collapse
I reset my 2.3.5 counter this evening with a USB jig
luster said:
I reset my 2.3.5 counter this evening with a USB jig
Click to expand...
Click to collapse
2.3.5 ???????????????????
jje
JJEgan said:
On latest 2.3.4 USB jig will not reset the counter .
jje
Click to expand...
Click to collapse
Only in the Official 2.3.5 KI Firmwares are fixed.
http://www.xda-developers.com/android/no-more-usb-host-api-support-on-ki-firmware/
m0ngstr0us said:
Only in the Official 2.3.5 KI Firmwares are fixed.
http://www.xda-developers.com/android/no-more-usb-host-api-support-on-ki-firmware/
Click to expand...
Click to collapse
Thanks a misprint .
jje
luster said:
I reset my 2.3.5 counter this evening with a USB jig
Click to expand...
Click to collapse
Yes, many people have done this because they know which package to use.
JJEgan said:
On latest 2.3.4 USB jig will not reset the counter .
jje
Click to expand...
Click to collapse
It will if you use the firmwares from XDA OR use the workaround that we provide.
So there is no way to reset the counter when using the new bootloader yet, not even flashing through the jig (tried that, counter still up)?
Can any one tell me what is the exact specification of the resistance to make a jig . I have searched ebay it cost around 400k whereas i made the jig only for 12 rs . Its not working , i think there must be something wrong with the resistance rating .
Btw i used 2 ,150 ohm connected in series to another 1 ohm. The phone instead of going to dnld mode it boots to the main OS
Sent from my GT-I9100 using Tapatalk
motodude said:
Can any one tell me what is the exact specification of the resistance to make a jig . I have searched ebay it cost around 400k whereas i made the jig only for 12 rs . Its not working , i think there must be something wrong with the resistance rating .
Btw i used 2 ,150 ohm connected in series to another 1 ohm. The phone instead of going to dnld mode it boots to the main OS
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Hi motodude!
300k Ohm bettween 4 and 5 pins.
d3l1 said:
So there is no way to reset the counter when using the new bootloader yet, not even flashing through the jig (tried that, counter still up)?
Click to expand...
Click to collapse
Download the old bootloader from intratechs original firmware thread and flash with Odin. A few posts in from beginning of thread and available to download by itself.
Then you can use the jig.
Sent from my GT-I9100 using XDA App
aceofclubs said:
Download the old bootloader from intratechs original firmware thread and flash with Odin. A few posts in from beginning of thread and available to download by itself.
Then you can use the jig.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I have tried this multiple times and i cant get it to work. I know the jig has worked in the past. is it possible that it has stopped working? or a way to confirm i am using an old bootloader?
Why it is so important to reset the count besides voiding the warranty?
Is the phone going to stop functioning after reaching xx number or is there a maximum number?
Sent from my GT-I9100G using Tapatalk
wcg707 said:
Why it is so important to reset the count besides voiding the warranty?
Is the phone going to stop functioning after reaching xx number or is there a maximum number?
Sent from my GT-I9100G using Tapatalk
Click to expand...
Click to collapse
i dont think there is a limit. i think everyone just assumes there isnt.
I just want to be able to reset mine to 0 just in case i do have problems. atm i cant and would like to do it before i break it (i break lots of things)
Guys, try searching the site a little more.
install the insecure kernel with cwm you want
extract the zimage from this dump it on your internal sd
flash the stock kernel version back over it using odin (resets counter)
reboot to cwm and flash the zimage from within cwm no more counter / triangle
curioct said:
Guys, try searching the site a little more.
<snip>
reboot to cwm and flash the zimage from within cwm no more counter / triangle
Click to expand...
Click to collapse
Maybe it should be you searching the site a little more, as that will most certainly not reset the counter.
Somebody help me with my issue
I was having RR ROM with Siyah 3.3.3b Kernel and the secondary boot is port JB
I was on the secondary boot and I was restarting I found that the device is crashed
I thought it’s the kernel so I booted the phone to the download mood and flashed a kernel again and its not working also
I tried to add new software from Odin and it was giving me errors like | failed to mount emmc
I searched the internet and by mistake I flashed the device with i9100G PIT files and I re-partitioned the device and also I flashed a new boot loader not only this but also during the flashing process my pc crashed and it restarts leaving my device with no life
I can’t even turn the device on or go to download mood or anything the only thing that let me have a faith that the mobile is still a live that its getting heat while the battery is plugged in
Anyone can help with this?
Hard Brick?
As far a I know flashing a wrong bootloader hard-bricks your phone. the bootloader is what loads first, ans then in turn loads the rest of the system. if your bootloader is broken, it will neither load recovery, DL-Mode nor the system. maybe you can find a solution to this by searching for wrong bootloader or anything of the sort.
if everything fails you would need to get a new motherboard or whatever it is called in an android phone. there are guides in this forum on this, I once used this one: http://forum.xda-developers.com/showthread.php?t=1253969 althogh the photos only seem to work with the old xda2010 theme.
I hope it is not what it looks like and you get your phone up and ruing again.
Bootloader had nothing to do with what went wrong for him. He flashed an I9100G pit file to an I9100.
OP, unfortunately there's nothing you can do at this point short of JTag service, or visiting/sending the phone to a Samsung service center.
find a repair center that preforms jtag near you, it should cost you about 40$
Coirpre said:
As far a I know flashing a wrong bootloader hard-bricks your phone. the bootloader is what loads first, ans then in turn loads the rest of the system. if your bootloader is broken, it will neither load recovery, DL-Mode nor the system. maybe you can find a solution to this by searching for wrong bootloader or anything of the sort.
if everything fails you would need to get a new motherboard or whatever it is called in an android phone. there are guides in this forum on this, I once used this one: http://forum.xda-developers.com/showthread.php?t=1253969 althogh the photos only seem to work with the old xda2010 theme.
I hope it is not what it looks like and you get your phone up and ruing again.
Click to expand...
Click to collapse
thanks for the reply but let me tell you that it has nothing to do with my boot loader I just flashed wrong PIT file
ctomgee said:
Bootloader had nothing to do with what went wrong for him. He flashed an I9100G pit file to an I9100.
OP, unfortunately there's nothing you can do at this point short of JTag service, or visiting/sending the phone to a Samsung service center.
Click to expand...
Click to collapse
remorema said:
find a repair center that preforms jtag near you, it should cost you about 40$
Click to expand...
Click to collapse
am living in Egypt we don't have Jtag services .. i saw what they can make on you-tube and am still in warranty so i don't know what to do should i pass it by the warranty should they let me pay or it will be free ?
From what i've read on this forum its better if you try to send it to samsung for warranty your chances to get it repaired is 50/50 just play dump you have nothing to loose
thanks guys for your reply i think i made an issue with the MB BOIS firmware hence it has to be hard flashed in the warranty so am scheduling the same on next Friday i hope that they will not ask for money as it was on a custom ROM
because here in Egypt Warranty is make fool of us and they always take much money to fix noob issues so guess what they can do regarding mine.
I've got my device from the warranty , its working fine now .. i need to inform you that Warranty in Egypt confirmed that flashing custom ROMs is not voiding the Warranty its just black listing the device in their records .
They are flashing boot loaders smoothly.
Sent from my GT-I9100 using xda premium
moe.nassef said:
I've got my device from the warranty , its working fine now .. i need to inform you that Warranty in Egypt confirmed that flashing custom ROMs is not voiding the Warranty its just black listing the device in their records .
They are flashing boot loaders smoothly.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
u r lucky
its not the same case as evrywhr arnd .. may got the warranty void
i know am lucky lool if any body ia facing the same he/she can ship the device to Egypt and it will get the correct treatment lol
Am proud to have this kind of Samsung store in Egypt
Sent from my GT-I9100 using xda premium
moe.nassef said:
i know am lucky lool if any body ia facing the same he/she can ship the device to egypt and it will get the correct treatment lol
am proud to have this kind of samsung store in egypt
sent from my gt-i9100 using xda premium
Click to expand...
Click to collapse
haha i wish samsung gave international warranrty
neerajganga said:
haha i wish samsung gave international warranrty
Click to expand...
Click to collapse
I'd like to thank you rele for your support in my issue from the beginning.
Sent from my GT-I9100 using xda premium
moe.nassef said:
I'd like to thank you rele for your support in my issue from the beginning.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
haha
cheers mate
glad that ur warranty is not void and u got it fixed
Cheers..!!!
I am seeking the pit file of e210k. Since my touchscreen is no response after I use triangle away to reset flash counter. Please help me to solve this problem. My s3 is vital for me!!!!!
jack0662 said:
I am seeking the pit file of e210k. Since my touchscreen is no response after I use triangle away to reset flash counter. Please help me to solve this problem. My s3 is vital for me!!!!!
Click to expand...
Click to collapse
One the Korean thread two try sammobile .com three Google .
jje
e210k
JJEgan said:
One the Korean thread two try sammobile .com three Google .
jje
Click to expand...
Click to collapse
Do u have solution????
jack0662 said:
Do u have solution????
Click to expand...
Click to collapse
As posted if you cannot use Google Sammobile or Korean thread then no solution .
jje
jack0662 said:
I am seeking the pit file of e210k. Since my touchscreen is no response after I use triangle away to reset flash counter. Please help me to solve this problem. My s3 is vital for me!!!!!
Click to expand...
Click to collapse
i brick my touch 2 times
first in triangleaway 2.36 then send it to warranty n they replaced the whole screen.
second flashing wrong recovery (SHV-E250K = korean note 2) with my SHV-E210K s3, im confused here so my mistake. and send again for screen replacement.
its an issue with triangleaway with version 2.36 and up resetting it will result in hardware brick( touchscreen)so even u use pit file its no use. the only solution is to send it for warranty. but before sending it be sure to reset your counter by using usb otg and mouse to be able to navigate the screen and use triangleaway 2.26 to reset the counter.
here is the guide to reset your counter, this surely help you to claim warranty
http://forum.xda-developers.com/showthread.php?t=2145908&page=2
Can you enter download mode?
Sent from my GT-I9300 using xda premium
My s3 touchscreen has no reponse!
Nick Fury said:
Can you enter download mode?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I can go to download mode. But I am seeking the alternative method beside sent to warrntly.
As long as you can enter download mode then you can flash the stock official firmware through odin and it will sort your problem out my friend
Sent from my GT-I9300 using xda premium
Nick Fury said:
As long as you can enter download mode then you can flash the stock official firmware through odin and it will sort your problem out my friend
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
flashing it with triangle away 2.36 or flashing wrong kernel or recovery( note/note2 ) to your e210k s3 will definitely broke your touch hardware
others and i already tried that with no luck but you can try what he suggest to find out, unfortunately your hardware already died you dont have any option but to replace it by yourself or go to warranty.
Shall I take to to samsung??
chris151722 said:
i brick my touch 2 times
first in triangleaway 2.36 then send it to warranty n they replaced the whole screen.
second flashing wrong recovery (SHV-E250K = korean note 2) with my SHV-E210K s3, im confused here so my mistake. and send again for screen replacement.
its an issue with triangleaway with version 2.36 and up resetting it will result in hardware brick( touchscreen)so even u use pit file its no use. the only solution is to send it for warranty. but before sending it be sure to reset your counter by using usb otg and mouse to be able to navigate the screen and use triangleaway 2.26 to reset the counter.
here is the guide to reset your counter, this surely help you to claim warranty
http://forum.xda-developers.com/showthread.php?t=2145908&page=2
Click to expand...
Click to collapse
Mine is korean version(Parallel import) and I am in Hong Kong! Can I take it to SAMSUNG (HK) to get further repair??
jack0662 said:
Mine is korean version(Parallel import) and I am in Hong Kong! Can I take it to SAMSUNG (HK) to get further repair??
Click to expand...
Click to collapse
i dont know maybe you call them first if your korean s3 is covered in your country or call the store where you bought your phone.
chris151722 said:
i dont know maybe you call them first if your korean s3 is covered in your country or call the store where you bought your phone.
Click to expand...
Click to collapse
No Samsung will only repair korean variants in korea.
Also, the touchscreen is pretty much done. The note2 kernel has a higher voltage for the touch controller and it's too high for the S3. iirc anyways.
The same thing happaned to Erica one of the XDA tv guys :3
xSpeced said:
No Samsung will only repair korean variants in korea.
Also, the touchscreen is pretty much done. The note2 kernel has a higher voltage for the touch controller and it's too high for the S3. iirc anyways.
The same thing happaned to Erica one of the XDA tv guys :3
Click to expand...
Click to collapse
yes i think you are right cos the size of the screen of note/2 is bigger compare to s3 thats why it needs higher voltage and this causes the failing of touch hardwares.
I got a good news! I take it to the seller they said they have two method to solve this problem. First is change the monitor but it expense ($1800HKD), another is change the bus of the LCD it cost 800HKD (100USD). Obviously, i choose second method!
i updated my galaxy S2 i9100 to official ics rom than rooted it via odin , than flashed a custom kernel and successfully entered to the clockwork mod then wiped data and my screen went black and my phone is dead :crying: .. . .
i tried to go to download mode and recovery but no response from the device the computer cant seems find the device while connected to the PC .. no response from the device when connected to the charger
is there i can do to turn this piece of plastic to a phone again except changing the mother board . .
shohag_prince said:
i updated my galaxy S2 i9100 to official ics rom than rooted it via odin , than flashed a custom kernel and successfully entered to the clockwork mod then wiped data and my screen went black and my phone is dead :crying: .. . .
i tried to go to download mode and recovery but no response from the device the computer cant seems find the device while connected to the PC .. no response from the device when connected to the charger
is there i can do to turn this piece of plastic to a phone again except changing the mother board . .
Click to expand...
Click to collapse
ICS 4.0.4?If so,then it's EMMC brick bug.
GamingDj said:
ICS 4.0.4?If so,then it's EMMC brick bug.
Click to expand...
Click to collapse
can it be fixed bro??? @GamingDj
I hope for your sake this is not the case.....but it sounds like another case of ics brickbug......
Can you tell us which kernel you flashed (provide a link if you can) and what (odin) method you used to root.....
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
keithross39 said:
I hope for your sake this is not the case.....but it sounds like another case of ics brickbug......
Can you tell us which kernel you flashed (provide a link if you can) and what (odin) method you used to root.....
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
i did this to my device almost 2 week ago and upgraded my HDD so unfortunately i don't have the back up and can't remember the kernel version or which file i used to root it
maybe luck is not on my side after all ... .
Ok....to recap......
Can you enter recovery mode?
Can you enter download mode?
Do you get the battery icon on the screen when you plug the charger in?
Does the area below the main camera get warm when you attempt to charge?
If your answers are 'no', 'no', 'no' and yes.....then more than likely it IS brickbug.......
Which brings me to my next question.......
Ignoring the fact that you rooted (this is now undetectable) are you under warranty?
Samsung are aware that *some* of their phones will fail if a wipe or kies update is performed on them. So as long as you tell them........
'I tried to update with kies and then the phone switched off and wouldn't switch on again'
then they *should* repair the phone under warranty.
Just DON'T mention XDA or rooting or odin or brickbug......or anything else like that and you should be ok.....
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Had the same problem with my old s2.The phone doesn't boot into recovery or download mode if the battery is dead,Make sure the battery is alright and try again.I had to replace my battery.
If all is well,then its EMMC brick.
Service centre.
keithross39 said:
Ok....to recap......
Can you enter recovery mode?
Can you enter download mode?
Do you get the battery icon on the screen when you plug the charger in?
Does the area below the main camera get warm when you attempt to charge?
If your answers are 'no', 'no', 'no' and yes.....then more than likely it IS brickbug.......
Which brings me to my next question.......
Ignoring the fact that you rooted (this is now undetectable) are you under warranty?
Samsung are aware that *some* of their phones will fail if a wipe or kies update is performed on them. So as long as you tell them........
'I tried to update with kies and then the phone switched off and wouldn't switch on again'
then they *should* repair the phone under warranty.
Just DON'T mention XDA or rooting or odin or brickbug......or anything else like that and you should be ok.....
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
the answer is "no","no","no' and "yes" and unfortunately i am out of warranty so should i assume the motherboard is permanently
dead ?? @keithross39 and tnx for answering
vish91 said:
Had the same problem with my old s2.The phone doesn't boot into recovery or download mode if the battery is dead,Make sure the battery is alright and try again.I had to replace my battery.
If all is well,then its EMMC brick.
Click to expand...
Click to collapse
after you replaced ur battery ware u able to go to download mode despite of the EMMC brick ether way i m going to change the battery and see if it works. . . thnx for replying ... @vish91
MistahBungle said:
Service centre.
Click to expand...
Click to collapse
unfortunately may be yes . . . :crying:
shohag_prince said:
the answer is "no","no","no' and "yes" and unfortunately i am out of warranty so should i assume the motherboard is permanently
dead ?? @keithross39 and tnx for answering
Click to expand...
Click to collapse
If it is the emmc brickbug (and it's looking like it is) not even samsung can bring that main board back to life...sorry mate. ..
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Painful mistake. Hate reading threads like this.
keithross39 said:
if it is the emmc brickbug (and it's looking like it is) not even samsung can bring that main board back to life...sorry mate. ..
sent from my rooted, de bloated, stock jb powered s2 via philz kernel and xda developers app
Click to expand...
Click to collapse
. .. . .
andrewwright said:
Painful mistake. Hate reading threads like this.
Click to expand...
Click to collapse
Painful indeed . . .. . .. .
was there anything i could have done to prevent this .. . ????
From what I can tell 4.0.4 was the problem. Soon as you factory reset the phone dies. Sam knows about this that makes it even worst. Sorry to hear about your dead s2
keithross39 said:
If it is the emmc brickbug (and it's looking like it is) not even samsung can bring that main board back to life...sorry mate. ..
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
was there any thing i could have done to prevent this bro .. . . .????
Stay well away from 4.0.4 firmware and factory reset. Even with a custom kernel I think is a bad move to stay on it.
andrewwright said:
From what I can tell 4.0.4 was the problem. Soon as you factory reset the phone dies. Sam knows about this that makes it even worst. Sorry to hear about your dead s2
Click to expand...
Click to collapse
at least its good to know that its not my fault . . .. tnx bro. . .:good:
Some will say its your fault for not reading. Not me this is a dirty samsung problem and they should of recalled ALL the faulty handset's as I think they are faulty and pull the 4.0.4 from every were. Can I ask were did you get that firmware from?
hi alll..
i have samsung galaxy s3 having android 4.1.1 stock and m having charging problem..
sometimes my phone gets full charge in 2 hrs and sometimes it takes 5 hrs..m using samsung stock charger which comes with the phone..
plzzz help me frnzzz..m worried coz its just 10 days since i purchase my phone....
what should be the problem??
plzzz reply as soon as possible....
First update to the latest 4.1.2, the version you're on will kill the phone's nand memory.
Get a replacement charger and lead, the stock one is useless. I use the older style Samsung one, with the integral flat ribbon lead.
I would return to the seller.
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
JJEgan said:
I would return to the seller.
Basics read first.
http://forum.xda-developers.com/showthread.php?t=2344125
Critical you read the first two posts .
Click to expand...
Click to collapse
so it means there is problem in my charger...not in my phone hardware..right???
deven17 said:
so it means there is problem in my charger...not in my phone hardware..right???
Click to expand...
Click to collapse
Who knows without testing.
Test cable |Test Charger Test Phone
Your phone is under warranty now .
You play with firmwares in ignorance and you may void warranty .
JJEgan said:
Who knows without testing.
Test cable |Test Charger Test Phone
Your phone is under warranty now .
You play with firmwares in ignorance and you may void warranty .
Click to expand...
Click to collapse
bro i hve never tried to root my phone...i am using android 4.1.2 given by samsung bydefault...
and thanx fr reply...
can u tell me how to check if there is problem in my phone hardware...
deven17 said:
bro i hve never tried to root my phone...i am using android 4.1.2 given by samsung bydefault...
and thanx fr reply...
can u tell me how to check if there is problem in my phone hardware...
Click to expand...
Click to collapse
Repeat take it to a service centre bro