Related
Hi guys
After unlocking bootloader on my SE Xperia X10 Mini, I flashed nAa-08 kernel and then MiniCM7-2.1.6. During the installation, however, I noticed that the ROM requires nAa-07 kernel, while I flashed nAa-08. All was still fine, but I would like to know if there are any known problems or if I have to flash nAa-07 kernel
TY
Greetings from Italy
sith.warrior said:
Hi guys
After unlocking bootloader on my SE Xperia X10 Mini, I flashed nAa-08 kernel and then MiniCM7-2.1.6. During the installation, however, I noticed that the ROM requires nAa-07 kernel, while I flashed nAa-08. All was still fine, but I would like to know if there are any known problems or if I have to flash nAa-07 kernel
TY
Greetings from Italy
Click to expand...
Click to collapse
it should not have major problems but it would be much safer and faster if you used the same rom kernel with the latest MiniCM7-2.1.7.i bet you it wont let you down.
I used the latest nAa kernel with his latest MiniCM7-2.1.7 and its just off the hook(VERY FAST AND STABLE)- PERFECT !!!
go here -> http://forum.xda-developers.com/show....php?t=1068553
SENT FROM x10mini pro running nAa MiniCM7-2.1.7
REMEMBER TO HIT THE THANKS BUTTON IF THIS HELPED YOU !!
I could try, but i have X10 Mini, not Pro. Probably a new porting for X10 Mini will arrive in few days
I hope so, at least
Would it be better to reflash nAa-07 kernel for now?
Naa forget to update the updater script, use always the last kernel!
Enviado desde mi E10a.
ChavitoArg said:
Naa forget to update the updater script, use always the last kernel!
Click to expand...
Click to collapse
I think so, too
TY to everybody
The MiniCM installation guide states to flash the latest nAa kernel.
Newer kernels are usually better than older ones.
I doubt nAa would remove features with new kernel versions.
santaranger said:
The MiniCM installation guide states to flash the latest nAa kernel
Click to expand...
Click to collapse
Exactly. I followed the instructions, but CMW Recovery was unable to find the nAa-07 kernel and suggest me to flash it. That's all.
Newer kernels are usually better than older ones.
I doubt nAa would remove features with new kernel versions.
Click to expand...
Click to collapse
It's my first time that I try flashing. Moreover, I have SE X10 Mini for less than a month. I wanted to be sure I have done everything right
sith.warrior said:
Exactly. I followed the instructions, but CMW Recovery was unable to find the nAa-07 kernel and suggest me to flash it. That's all.
It's my first time that I try flashing. Moreover, I have SE X10 Mini for less than a month. I wanted to be sure I have done everything right
Click to expand...
Click to collapse
First of all make sure you have downloaded evrything you need to begin the flashing.
{s1tool, msm7227,LATEST nAa kernel for x10 mini-NOT PRO,LATEST nAa MINICM7,Gapps-gb} THEY ARE ALL LISTED IN THE GUIDE.
1.Bootloader unlock is the forst step but you have to check that your phone can be safely bootloader unlocked. PLEASE HAVE A GOOD READ THROUGH THE GUIDE SO THAT YOU ARE SURE http://forum.xda-developers.com/showthread.php?t=1254225
rember to hit the thanks button if i helped you.
popcaan said:
First of all make sure you have downloaded evrything you need to begin the flashing.
{s1tool, msm7227,LATEST nAa kernel for x10 mini-NOT PRO,LATEST nAa MINICM7,Gapps-gb} THEY ARE ALL LISTED IN THE GUIDE.
1.Bootloader unlock is the forst step but you have to check that your phone can be safely bootloader unlocked. PLEASE HAVE A GOOD READ THROUGH THE GUIDE SO THAT YOU ARE SURE http://forum.xda-developers.com/showthread.php?t=1254225
rember to hit the thanks button if i helped you.
Click to expand...
Click to collapse
Yeah Thanks, all went well. Bootloader was unlocked, nAa-08 kernel was installed. MiniCM7, too.
I wanna just saying that (maybe) there is a minor bug in CWM Recovery. In fact, it doesn't recognise nAa-08 kernel.
Not so worrying...Please, try to understand me, i'm just a n00b
sith.warrior said:
Yeah Thanks, all went well. Bootloader was unlocked, nAa-08 kernel was installed. MiniCM7, too.
I wanna just saying that (maybe) there is a minor bug in CWM Recovery. In fact, it doesn't recognise nAa-08 kernel.
Not so worrying...Please, try to understand me, i'm just a n00b
Click to expand...
Click to collapse
Hi did you manage to install and get everything working ??
Before rebooting into CWM you should have the ROM you want to install+THE GAPPS TOO.
Hello : All
My Xperia Neo is 4.0.2A.62 and already root and unlock boot loader.Yesterday i saw Xperia Neo ICS 4.03 Beta V1.2 [4.1.C.0.7] and i updated step by step by in that thread.
At first flash boot with MT15i_Neo_ICS_Kernel_V1.This step with i completed.And then, i boot with clockworkmod recovery and install from sd card and install Xperia Neo ICS 4.03 Beta V1.zip. When i installed Xperia Neo ICS 4.03 Beta V1.zip, no error with completed and finished but when i reboot changed from Sonyericsson to Sony and circle booting.
What i wrong with Xperia Neo ICS 4.03 Beta V1.2 [4.1.C.0.7]?? what i need to do that?? Please Explain me
Best Regards
ppaphyo.
The same problem for me. I open a thread but i have no good answer. I asure you I tried with another custom rom and it does the same result, no flash phone. Another user tell me to try with another ROM and kernel, but i think it doesn't change much. I'll tell you when I flash it.
Anyone can help us? Can't we flash any custom Rom?
emaxxim said:
Anyone can help us? Can't we flash any custom Rom?
Click to expand...
Click to collapse
Guys....pleas if you make question or new thread...make it clear
Ask what you want and we help you....because hard is read this question "help, I'm installed xxxxx.xxxx.xxxx now I'm updated xxxxx.xxx.xxx, then I'm rooted 4 times up to xxx.xxx.school, then installed xxx.xxx.xxx , and then I used this tutorial xxx.xxxx.xxxx and then I did that xxxxxxx....xxxx and that xxxxx.xxxc."
Make it clear what you want!!
And don't take me like negative person I just want help us, but its hard to undestant those questions.
Sent from my MT15i using Tapatalk
What going wrong on the flashing with custom rom, we have root, bootloader unlocked, the flash of the kernel is smooth so the flash of the rom (CWM don't report any error), but something going wrong, because after i reboot the phone after i flash the rom the NEO is stucked with loading Sony boot logo for very long time (I left my phone in this status for almost 30 min, and nothing happened). So Anyone can help us? Or is just our phone?
emaxxim said:
What going wrong on the flashing with custom rom, we have root, bootloader unlocked, the flash of the kernel is smooth so the flash of the rom (CWM don't report any error), but something going wrong, because after i reboot the phone after i flash the rom the NEO is stucked with loading Sony boot logo for very long time (I left my phone in this status for almost 30 min, and nothing happened). So Anyone can help us? Or is just our phone?
Click to expand...
Click to collapse
Kernel.
Sent from my MT15i using Tapatalk
the kernel included in the KA05 Ice Cream release ( i follow step to step the instructions in that thread) and the kernel MT15i_Neo_ICS_Kernel_V1 which is write in the thread for the flash of AOSP 4.0.3 ICS BETA FINAL.
In both occasion I follow step by step the instruction in the thread, so what's going wrong?
emaxxim said:
the kernel included in the KA05 Ice Cream release ( i follow step to step the instructions in that thread) and the kernel MT15i_Neo_ICS_Kernel_V1 which is write in the thread for the flash of AOSP 4.0.3 ICS BETA FINAL.
In both occasion I follow step by step the instruction in the thread, so what's going wrong?
Click to expand...
Click to collapse
OK.
1st. Any roms starting max 5 minutes.!!!
If dont...then is problem in "kernel" or rom itself.
Something is wrong in updater script or build.prop
Or maybe something is wrong in my recovery? I use CWM, i install it with following the instructions in this thread
HTML:
http://forum.xda-developers.com/showthread.php?t=1364509
in this forum. And if it's wrong what recovery I have to install?
emaxxim said:
Or maybe something is wrong in my recovery? I use CWM, i install it with following the instructions in this thread
HTML:
http://forum.xda-developers.com/showthread.php?t=1364509
in this forum. And if it's wrong what recovery I have to install?
Click to expand...
Click to collapse
http://forum.xda-developers.com/sho...teks Clean OC ICS Beta from 4.1.C.0.6 Sources
Fastboot flash boot boot.img this kernel leave the ics rom on wipe its data /cashe / advanced >dalvik wipe if no boot flash rom again
Let us know what happens
If no good flash aosp smaller rom
http://forum.xda-developers.com/sho....3 ICS BETA FINAL | Fast and Clean | Released
Sent from my MT15i using Tapatalk
WIPE the stuff(system,data,cache,dalvik cache, whatever its written in ROM's first post) before flashing new ROM in zip.
In this case, most likely you didn't wipe/format system partition.
I follow the tips of kormatoes and integrated with the instrucions od madfish and everything is going fine, but there were some problems with that kernel, you kormatoes suggest me, so I tried to opt for the MT15i kernel, and its worked too.
Now I'm trying to install the KA05 Ice Cream Sony ROM, they say its the best custom rom based on ICS for Sony Xperia NEo. If something going wrong can you be at my side?
emaxxim said:
I follow the tips of kormatoes and integrated with the instrucions od madfish and everything is going fine, but there were some problems with that kernel, you kormatoes suggest me, so I tried to opt for the MT15i kernel, and its worked too.
Now I'm trying to install the KA05 Ice Cream Sony ROM, they say its the best custom rom based on ICS for Sony Xperia NEo. If something going wrong can you be at my side?
Click to expand...
Click to collapse
I'm off to work but yes I'll help after if you can wait till 11 pm gmt
Sent from my MT15i using Tapatalk
I just want to thanks all of you who are follow my hard path for this first flash.
Now i've installed KA05 Ice Cream Sony Rom, this is pretty good. i installed the kerne OC, i think its for overcloccking right? How tools can i use to overclock it?
Is this kernel good or I need something different?
emaxxim said:
How tools can i use to overclock it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=505419
hi all,
i am very big trouble.....
i had stock rom installed on my x10i.....after reading a lot about ThGo2 v17.0 rom i decided to install it (not the first rom i installed).....
after following all the steps i.e
1. flashing the th_kernel provided
2. booting to xrecovery and installing the custom rom provided and addons....
the phone did start but was very laggy so i decided to shift to stock kernel and flashed it using flashtool but the flashtool got stuck at 2% and said aborting flash...
so i disconnected the phone and now i am not able to flash any firmware or kernel
plz help as soons as possible
update...
just found out that thGo2 rom made my device xperia arc aka i was in the about phone setting in my rom and found that the phone is not listed as x10i as it should be... it is listed as s0-01c aka xperia arc
rohit25 said:
hi all,
i am very big trouble.....
i had stock rom installed on my x10i.....after reading a lot about ThGo2 v17.0 rom i decided to install it (not the first rom i installed).....
after following all the steps i.e
1. flashing the th_kernel provided
2. booting to xrecovery and installing the custom rom provided and addons....
the phone did start but was very laggy so i decided to shift to stock kernel and flashed it using flashtool but the flashtool got stuck at 2% and said aborting flash...
so i disconnected the phone and now i am not able to flash any firmware or kernel
plz help as soons as possible
Click to expand...
Click to collapse
Cant you enter into flashmode????
Question
Need More details:
1)Locked or Unlocked Bootloader?
2)Which stock kernel you flashed? Downloaded from?
3)[If Locked Bootloader] Can you enter xrecovery? If can, make full wipe, clear cache partition, install new ROM via "install custom zip from SDcard.
4)[If Unlocked Bootloader] Try flash some custom Kernel for Unlocked bootloader like DooMKernel, see whether it reach recovery mode or not.
Sincerely,
whitefang
If can, pls kindly hit thanks button as an appreciation
YES
THeLogiC said:
Cant you enter into flashmode????
Click to expand...
Click to collapse
yes i can enter the flashmode but as i connect the phone via the usb cable the flashtool displays
flashing started
flashing ending
ERROR
not a noob
whitefang3456 said:
Need More details:
1)Locked or Unlocked Bootloader?
2)Which stock kernel you flashed? Downloaded from?
3)[If Locked Bootloader] Can you enter xrecovery? If can, make full wipe, clear cache partition, install new ROM via "install custom zip from SDcard.
4)[If Unlocked Bootloader] Try flash some custom Kernel for Unlocked bootloader like DooMKernel, see whether it reach recovery mode or not.
Sincerely,
whitefang
If can, pls kindly hit thanks button as an appreciation
Click to expand...
Click to collapse
the bootloader is unlocked
the kernel flashed was X10_2.3.3_Th_kernel-n1.1-BootManager-v2.0
the rom installed was ThGo2 v17
no i am not able to flash to any other kernel.... but i am able to enter flashmode
it says error in flashtool
THE ROM MADE MY PHONE PHONE SO-01C AS THE MODEL NUMBER IN SETTINGS ABOUT PHONE....
so i am getting forece close when try repairing my phone using seus
Download 2.3.3 stock firmware and flash it through flashtool
Sent from my X10i
didnt work
THeLogiC said:
Download 2.3.3 stock firmware and flash it through flashtool
Sent from my X10i
Click to expand...
Click to collapse
i already did that have a repository of all the roms and kernel on my hdd.....didnt work though
so went to the blog and updated my kernel from thjap.org... turns out every1 was compalining of the rom being laggy and the kernel used was older version so updated it and then came back to FXP125.....
the BEST rom out there :victory:
anyway a BIG THANKS 2 ALL
rohit25 said:
i already did that have a repository of all the roms and kernel on my hdd.....didnt work though
so went to the blog and updated my kernel from thjap.org... turns out every1 was compalining of the rom being laggy and the kernel used was older version so updated it and then came back to FXP125.....
the BEST rom out there :victory:
anyway a BIG THANKS 2 ALL
Click to expand...
Click to collapse
yes cm7.2 is great
Hi Guys!
I had root my Xperia Mini Pro and instal CWM.
I'am on GB.
When i instal a ROM, Real ICS or Real ICS lite, i can see only sony ericsson logo.
I waiting during 15min, and nothing has change.
Now I unlock bootloader , but i always see only sony ericsson logo, when i start the phone after rom installing.
What can I do?
I never had there problems with my old x10.
PS: "From the downloads section, download kernel installation package and extract the folder."
Where is this section? Where can i download kernel instalation package? (http://forum.xda-developers.com/showpost.php?p=27376017&postcount=2)
I'am sorry for my very bad english.
every rom has its specified kernel
For stock based ICS Roms you can flash
Rage Kernel(v3.2)
Krsh Kernel
Mesa kernel
for CM 9.0 flash the kernel included the zip file by FXP
there are some kernels for GB roms as well you can search them
So, if i want to instal RealICS rom, i must instal first the rom and next i instal specified kernel with fastboot, yes?
Beacuse RealICS dont work with stock kernel.
PS: If i flash Krsh kernel and next i instal a stock rom with flashtool, Krsh kernel is remplaced for stock kernel?
First kernel, then rom.
And, make sure u have unlocked bootloader to install custom kernel.
Or, u can use rom which based on official ics. Like expeacer rom.
Sent from my Nokia 3310
Hmm, it is complicated ; o
I'm sure, my bootloader is unlocked. I check in system info.
I'am on Stock GB , rooted with CWM and unlocked bootloader.
And now i want to instal RealICS. I have to instal Krsh kernel for ICS, but i have GB. How i do? First i have to instal Rooted ICS ? And later i instal Krsh kernel for ICS and I instal RealICS rom?
Or can i instal RealICS with rooted GB?
I'am lost ; |
D'oh. They already gave the answer yet u still ask the same question again.
U need to read, lots and lots of reading.
- turn off the phone
- boot to fastboot and flash ICS kernel
- when booting up ..enter cwm
- flash rom
- reboot
an0nym0us_ , that's right i have to read a lot. Beacuse i not understend a lot of words.
And i want to be sure for the instalation, beacuse i try a lot of times, and i had always sony logo.
Thanks for all the anwers ; )
Now i go to instal the rom.
I follow caer_ayu's tuto.
do a full wipe
and
format system (optional)
before flashing new roms
good luck m8
My guess is u didn't do wipe data in recovery before flashing the rom, hence the stuck at boot.
Good luck.
First things look complicated. Once you understood the basics all is much easier.
Most custom roms need custom kernels. Custom kernels can only flashed with unlocked bootloader.
Gesendet von meinem WT19i mit Tapatalk 2
I did all wipes and formats. But with the stock kernel , RealICS dosen't work.
But now, i had follow caer_ayu's mini tuto and that's work!
Thanks for you all, for all anwers! THANKS!
I was confused with kernel instalation, now all is ok.
Thanks one again!
And sorry for my bad english.
exiProx said:
I did all wipes and formats. But with the stock kernel , RealICS dosen't work.
But now, i had follow caer_ayu's mini tuto and that's work!
Thanks for you all, for all anwers! THANKS!
I was confused with kernel instalation, now all is ok.
Thanks one again!
And sorry for my bad english.
Click to expand...
Click to collapse
Good luck man, and beside learning to flashing, learn also to click thanks button. Easier than texting . For those who helped u.
Sent from my Nokia 3310
I have a sony ericsson X10, which i rooted and flashed CM7..
since i dont have better understanding of roms and kernels..i dont know how to get kitkat builds by xda for my X10 over cm..
Any help would be very useful...thanks in advance..
Specs:
Android version: 2.3.5
baseband version: 2.1.71
kernel version: 2.9.29-zdzihu-19082011 [email protected] #1
MOD version: ZMOD
Build number: CM7-ZDZIHU-MOD
born_high said:
I have a sony ericsson X10, which i rooted and flashed CM7..
since i dont have better understanding of roms and kernels..i dont know how to get kitkat builds by xda for my X10 over cm..
Any help would be very useful...thanks in advance..
Specs:
Android version: 2.3.5
baseband version: 2.1.71
kernel version: 2.9.29-zdzihu-19082011 [email protected] #1
MOD version: ZMOD
Build number: CM7-ZDZIHU-MOD
Click to expand...
Click to collapse
- Flash Stock GB 2.3.3 from your region using flashtool, or use Sony Update Service return to it.
- Root your X10 with flashtool.
- Flash Kernel required for your desired rom GB / ICS / JB / KK.
- Install rom by following the dev's instructions!
- Done!
JeffreyPiket said:
- Flash Stock GB 2.3.3 from your region using flashtool, or use Sony Update Service return to it.
- Root your X10 with flashtool.
- Flash Kernel required for your desired rom GB / ICS / JB / KK.
- Install rom by following the dev's instructions!
- Done!
Click to expand...
Click to collapse
jajaja You want to kill his Xperia X10 right?? KK Roms (in spanish CACA xD) are unstable in our lovely smartphone, and "The Great Developers" dissapeared some months ago. Tof and "his squad" are not building the Kernel 3.0 for the Xperia X10 anymore :'(
Kitkat cm10-Dekefake
Originally Posted by born_high View Post
I have a sony ericsson X10, which i rooted and flashed CM7..
since i dont have better understanding of roms and kernels..i dont know how to get kitkat builds by xda for my X10 over cm..
Any help would be very useful...thanks in advance..
Specs:
Android version: 2.3.5
baseband version: 2.1.71
kernel version: 2.9.29-zdzihu-19082011 [email protected] #1
MOD version: ZMOD
Build number: CM7-ZDZIHU-MOD
- Flash Stock GB 2.3.3 from your region using flashtool, or use Sony Update Service return to it.
- Root your X10 with flashtool.
- Flash Kernel required for your desired rom GB / ICS / JB / KK.
- Install rom by following the dev's instructions!
- Done!
Phone: Sony Ericsson Xperia X10i (Sensuous Black)
ROM: Somc Debrand Engine Project | RC3
Android version: 4.1.2
Kernel: 2.6.32.4-SDE-v1
Engine: v1.0_RC3
Click to expand...
Click to collapse
Sorry to bother you guys again...but i have rooted, bl unlocked x10 as i said.
trying to flash kitkat cm10-deke fake from here >> http://forum.xda-developers.com/showthread.php?t=2698130
but when in clockworkmod, i tried to restore the backup i created in ext_sd card, it says md5
md5 miss-match
Click to expand...
Click to collapse
tried to fix it by deleting everything on nandroid.md5....And i dont have any space in any folder..
What shall i do now. any help would be very much appreciated
born_high said:
Sorry to bother you guys again...but i have rooted, bl unlocked x10 as i said.
trying to flash kitkat cm10-deke fake from here >> http://forum.xda-developers.com/showthread.php?t=2698130
but when in clockworkmod, i tried to restore the backup i created in ext_sd card, it says md5
tried to fix it by deleting everything on nandroid.md5....And i dont have any space in any folder..
What shall i do now. any help would be very much appreciated
Click to expand...
Click to collapse
Why would you do that? It's exaclty the same as Achotjan's Somc Debrand Engine only modded to look like CM KK! My advise is to flash the latest SDE by Achotjan, it's not a custom rom, it's a firmware and it'll totally blow you away!!! or The latest FeraLab rom and kernel, it's GB on steroids and the most KitKatest of all GB roms also totally mind blowing. Satisfaction guaranteed!
JeffreyPiket said:
Why would you do that? It's exaclty the same as Achotjan's Somc Debrand Engine only modded to look like CM KK! My advise is to flash the latest SDE by Achotjan, it's not a custom rom, it's a firmware and it'll totally blow you away!!! or The latest FeraLab rom and kernel, it's GB on steroids and the most KitKatest of all GB roms also totally mind blowing. Satisfaction guaranteed!
Click to expand...
Click to collapse
Thank you very much for your reply..I will try to do what you mentioned..
Although some links would be very helpful...Thnaks again
Learned my lession
JeffreyPiket said:
Why would you do that? It's exactly the same as Achotjan's Somc Debrand Engine only modded to look like CM KK! My advise is to flash the latest SDE by Achotjan, it's not a custom rom, it's a firmware and it'll totally blow you away!!! or The latest FeraLab rom and kernel, it's GB on steroids and the most KitKatest of all GB roms also totally mind blowing. Satisfaction guaranteed!
Click to expand...
Click to collapse
Hey again jeffeyPiket ,
Yes like i said i have learnt my lessons from trial and error .. as i flashed a ferakernel with walkerlab jb v3 beta 2..
despite all of walkers hard work i have to say this is a very laggy (****ty) and unstable build...(i am not ungrateful ...And he is not releasing the final v3 So I am going to try
Ferakernel v23 + FerarRom39 GB
Click to expand...
Click to collapse
. Hope it will work out as you have said. Thanks a ton for your replies. I hope you would share the cons of feraRom here.
Thank you very much.
got stuck on FERALAB LOGO
JeffreyPiket said:
Why would you do that? It's exaclty the same as Achotjan's Somc Debrand Engine only modded to look like CM KK! My advise is to flash the latest SDE by Achotjan, it's not a custom rom, it's a firmware and it'll totally blow you away!!! or The latest FeraLab rom and kernel, it's GB on steroids and the most KitKatest of all GB roms also totally mind blowing. Satisfaction guaranteed!
Click to expand...
Click to collapse
Hello there,
So i tried to flash your
Quote:
Ferakernel v24 + FeraRomv39 GB
Everything went well. But after AROMA installer Reboot, it gets stuck on FeraLab logo and wont boot up even after 15 minutes.
I have done this whole thing twice with same result. Any solve ????/??