I have a sony ericsson X10, which i rooted and flashed CM7..
since i dont have better understanding of roms and kernels..i dont know how to get kitkat builds by xda for my X10 over cm..
Any help would be very useful...thanks in advance..
Specs:
Android version: 2.3.5
baseband version: 2.1.71
kernel version: 2.9.29-zdzihu-19082011 [email protected] #1
MOD version: ZMOD
Build number: CM7-ZDZIHU-MOD
born_high said:
I have a sony ericsson X10, which i rooted and flashed CM7..
since i dont have better understanding of roms and kernels..i dont know how to get kitkat builds by xda for my X10 over cm..
Any help would be very useful...thanks in advance..
Specs:
Android version: 2.3.5
baseband version: 2.1.71
kernel version: 2.9.29-zdzihu-19082011 [email protected] #1
MOD version: ZMOD
Build number: CM7-ZDZIHU-MOD
Click to expand...
Click to collapse
- Flash Stock GB 2.3.3 from your region using flashtool, or use Sony Update Service return to it.
- Root your X10 with flashtool.
- Flash Kernel required for your desired rom GB / ICS / JB / KK.
- Install rom by following the dev's instructions!
- Done!
JeffreyPiket said:
- Flash Stock GB 2.3.3 from your region using flashtool, or use Sony Update Service return to it.
- Root your X10 with flashtool.
- Flash Kernel required for your desired rom GB / ICS / JB / KK.
- Install rom by following the dev's instructions!
- Done!
Click to expand...
Click to collapse
jajaja You want to kill his Xperia X10 right?? KK Roms (in spanish CACA xD) are unstable in our lovely smartphone, and "The Great Developers" dissapeared some months ago. Tof and "his squad" are not building the Kernel 3.0 for the Xperia X10 anymore :'(
Kitkat cm10-Dekefake
Originally Posted by born_high View Post
I have a sony ericsson X10, which i rooted and flashed CM7..
since i dont have better understanding of roms and kernels..i dont know how to get kitkat builds by xda for my X10 over cm..
Any help would be very useful...thanks in advance..
Specs:
Android version: 2.3.5
baseband version: 2.1.71
kernel version: 2.9.29-zdzihu-19082011 [email protected] #1
MOD version: ZMOD
Build number: CM7-ZDZIHU-MOD
- Flash Stock GB 2.3.3 from your region using flashtool, or use Sony Update Service return to it.
- Root your X10 with flashtool.
- Flash Kernel required for your desired rom GB / ICS / JB / KK.
- Install rom by following the dev's instructions!
- Done!
Phone: Sony Ericsson Xperia X10i (Sensuous Black)
ROM: Somc Debrand Engine Project | RC3
Android version: 4.1.2
Kernel: 2.6.32.4-SDE-v1
Engine: v1.0_RC3
Click to expand...
Click to collapse
Sorry to bother you guys again...but i have rooted, bl unlocked x10 as i said.
trying to flash kitkat cm10-deke fake from here >> http://forum.xda-developers.com/showthread.php?t=2698130
but when in clockworkmod, i tried to restore the backup i created in ext_sd card, it says md5
md5 miss-match
Click to expand...
Click to collapse
tried to fix it by deleting everything on nandroid.md5....And i dont have any space in any folder..
What shall i do now. any help would be very much appreciated
born_high said:
Sorry to bother you guys again...but i have rooted, bl unlocked x10 as i said.
trying to flash kitkat cm10-deke fake from here >> http://forum.xda-developers.com/showthread.php?t=2698130
but when in clockworkmod, i tried to restore the backup i created in ext_sd card, it says md5
tried to fix it by deleting everything on nandroid.md5....And i dont have any space in any folder..
What shall i do now. any help would be very much appreciated
Click to expand...
Click to collapse
Why would you do that? It's exaclty the same as Achotjan's Somc Debrand Engine only modded to look like CM KK! My advise is to flash the latest SDE by Achotjan, it's not a custom rom, it's a firmware and it'll totally blow you away!!! or The latest FeraLab rom and kernel, it's GB on steroids and the most KitKatest of all GB roms also totally mind blowing. Satisfaction guaranteed!
JeffreyPiket said:
Why would you do that? It's exaclty the same as Achotjan's Somc Debrand Engine only modded to look like CM KK! My advise is to flash the latest SDE by Achotjan, it's not a custom rom, it's a firmware and it'll totally blow you away!!! or The latest FeraLab rom and kernel, it's GB on steroids and the most KitKatest of all GB roms also totally mind blowing. Satisfaction guaranteed!
Click to expand...
Click to collapse
Thank you very much for your reply..I will try to do what you mentioned..
Although some links would be very helpful...Thnaks again
Learned my lession
JeffreyPiket said:
Why would you do that? It's exactly the same as Achotjan's Somc Debrand Engine only modded to look like CM KK! My advise is to flash the latest SDE by Achotjan, it's not a custom rom, it's a firmware and it'll totally blow you away!!! or The latest FeraLab rom and kernel, it's GB on steroids and the most KitKatest of all GB roms also totally mind blowing. Satisfaction guaranteed!
Click to expand...
Click to collapse
Hey again jeffeyPiket ,
Yes like i said i have learnt my lessons from trial and error .. as i flashed a ferakernel with walkerlab jb v3 beta 2..
despite all of walkers hard work i have to say this is a very laggy (****ty) and unstable build...(i am not ungrateful ...And he is not releasing the final v3 So I am going to try
Ferakernel v23 + FerarRom39 GB
Click to expand...
Click to collapse
. Hope it will work out as you have said. Thanks a ton for your replies. I hope you would share the cons of feraRom here.
Thank you very much.
got stuck on FERALAB LOGO
JeffreyPiket said:
Why would you do that? It's exaclty the same as Achotjan's Somc Debrand Engine only modded to look like CM KK! My advise is to flash the latest SDE by Achotjan, it's not a custom rom, it's a firmware and it'll totally blow you away!!! or The latest FeraLab rom and kernel, it's GB on steroids and the most KitKatest of all GB roms also totally mind blowing. Satisfaction guaranteed!
Click to expand...
Click to collapse
Hello there,
So i tried to flash your
Quote:
Ferakernel v24 + FeraRomv39 GB
Everything went well. But after AROMA installer Reboot, it gets stuck on FeraLab logo and wont boot up even after 15 minutes.
I have done this whole thing twice with same result. Any solve ????/??
Related
hello ,
i have a X10 mini with miniCM7 2.1.6 firmware and nAa kernel 07 and i have many problem with this rom and this kernel so i would like to restore the SE original kernel and ROm . WHAT SHOULD I DO , help me plz ????
thx
just flash it with flashtool or SEUS, many threads that explain that
how ?? if i flash the stock kernel with flashtool i can 't access to xrecovery or cwm to do the update zip (=install the stock ROM )....
can i use directly http://forum.xda-developers.com/showthread.php?t=1228295 ??
download this and flash with flashtool
problem solved
i will try this i hope it will work !
this download is a kernel or rom or rom+kernel ?
thx for you , GOOD job
If that doesn't work try this. Tutorial made by Emperor.dk so thank him.
HooLIMAN87 said:
If that doesn't work try this. Tutorial made by Emperor.dk so thank him.
Click to expand...
Click to collapse
Not that I ever would go back to stock rom
But I thanked you for helping.
Sent from my E10i using xda premium
I'm using nAa kernel v0.9 and his rom CM7 2.1.7 for x10 mini pro, best rom and kernel for our little phones
SEUS (Sony Ericsson Update Service) is possibly the simplest to go back to stock as you don't have to worry about downloading the right rom and kernel and all of that. Just install, run and have a cup of coffee while you wait.
It doesn't root or install CWM though.
By the way, what problems are you having with the rom and kernel?
Ticklefish said:
SEUS (Sony Ericsson Update Service) is possibly the simplest to go back to stock as you don't have to worry about downloading the right rom and kernel and all of that. Just install, run and have a cup of coffee while you wait.
It doesn't root or install CWM though.
By the way, what problems are you having with the rom and kernel?
Click to expand...
Click to collapse
I was wondering that to..
Usually a simple wipe or maintanence does the trick..
Kaminek said:
i will try this i hope it will work !
this download is a kernel or rom or rom+kernel ?
thx for you , GOOD job
Click to expand...
Click to collapse
that is rom+kernel, just flash it
Kaminek said:
hello ,
i have a X10 mini with miniCM7 2.1.6 firmware and nAa kernel 07 and i have many problem with this rom and this kernel so i would like to restore the SE original kernel and ROm . WHAT SHOULD I DO , help me plz ????
thx
Click to expand...
Click to collapse
Stock!!! Whz would someone wanted to go back on stock?
Have you try minicm7 2.1.7 + nAa 09 kernel ??
I just flashed to miniCM 2.1.7 + nAa-09. Very satisfied! as I always am with MiniCM
Feel-good-story:
I was in the process of buying a new phone about a half a year ago when I decided to try a custom rom (miniCM). After that I felt like I got my new phone, and it's still going strong...
I actually think I would rather use my old Nokia 6100 instead of a X10 mini with stock rom!
Hi,
I want to put the MiniCM7-2.1.9 on my X10 Mini Pro. At the moment I have Froyobread v023f installed
Baseband: M76XX-TSNCJOLYM-53404015
Kernel: 2.6.29 [email protected] #1
Do I HAVE to flash a new kernel (nAa)?
Where can I see that my Bootloader is unlocked?
Greets
You do need that kernel, the rom won't work without it.
Have a look in the Development section for SE Tweaker, that'll tell you if your phone is unlocked.
Sent from my U20i using XDA App
If you never installed a custom kernel, your bootloader is locked so you need to unlock it before installing the kernel.
Latest MiniCM versions (from 2.1.0) need nAa's custom kernel to work so you have to install it or install a previous release of the ROM (I'd suggest 2.0.5)
use this to unlock your bootloader and flash a the nAa kernel - easy and quick
http://forum.xda-developers.com/showthread.php?t=986690
is it possible to flash the kernel after the rom? because I just did, and I got Sony Ericsson logo in screen.. can't install the kernel or go into recovery..
Super-Veloce said:
is it possible to flash the kernel after the rom? because I just did, and I got Sony Ericsson logo in screen.. can't install the kernel or go into recovery..
Click to expand...
Click to collapse
no you can and your doomed.
just joking. remember before installing a rom if the requirements says use this kernel then you should flash the kernel because it is required right? try going back to stock using pc companion or seus
Paddy3103 said:
Hi,
I want to put the MiniCM7-2.1.9 on my X10 Mini Pro. At the moment I have Froyobread v023f installed
Baseband: M76XX-TSNCJOLYM-53404015
Kernel: 2.6.29 [email protected] #1
Do I HAVE to flash a new kernel (nAa)?
Where can I see that my Bootloader is unlocked?
Greets
Click to expand...
Click to collapse
You can put only MiniCM7Pro
http://forum.xda-developers.com/showthread.php?t=1201116
Cordially,
Ra
Paddy3103 said:
Hi,
I want to put the MiniCM7-2.1.9 on my X10 Mini Pro. At the moment I have Froyobread v023f installed
Baseband: M76XX-TSNCJOLYM-53404015
Kernel: 2.6.29 [email protected] #1
Do I HAVE to flash a new kernel (nAa)?
Where can I see that my Bootloader is unlocked?
Greets
Click to expand...
Click to collapse
As far as I know, MiniCM7 works only with his nAa kernel, so your bootloader has to be unlocked. MiniCM Pro by paul-xxx uses stock kernel or custom kernels (nAa kernel with that rom will give a wifi error).
To check if you bootloader is unlocked. Use S1Tool and check the loader version. If it's a lower cased 'r' then it's unlocked, if not there are many tutorials around here to help you unlock your bootloader. Hope this helps.
@Paddy3103
Go to the official page (link below)
http://forum.xda-developers.com/showthread.php?t=1415026
It's got all the details that you'll need just make sure that you read every single line thoroughly.
If you make any mistakes than you can use sony ericsson update service to reset it back to the stock SE rom.
Btw I recommend that you use the flash tool to unlock bootloader and to check if its unlocked as Noobonic said use the SE1Tool.
For me I'd say that MiniCM7 is the best custom rom that exists right now but since we have to flash the nAa kernel it seems kind of risky at first but if you understand the steps and follow it properly than there's not much to worry about.
The other ROM's are also quite good but the MiniCM7 is the best and most stable custom ROM.
1. First download 4.0.3 kernel. (Neo V officially but will work on Neo)
2. Open flashtool 7.0 or newer version and flash just the kernel: untick wipe data/cache and tick exclude system/baseband and no final verification check.
3. Root with DooMLoRD's one click method shown here.
4. Optional: install CWM.
5. Now reflash 4.0.4 kernel using flashtool like shown above.
If you somehow do not have 4.0.4 firmware or if you are not on ICS but you want to update to, follow this guide from where you can download 4.0.3 and 4.0.4 ftf.
is it also applicable on Neo MT15i ? ? ?
buzzzy said:
1. First download 4.0.3 ftf. (neo v official but will work on neo too)
2. Open flashtool 7.0 or newer version and flash just the kernel:
Untick wipe data/cache and tick exclude system/baseband and no final verification check.
3. Root with DooMLoRD's one click method shown here.
4. Optional install CWM.
Now reflash 4.0.4 kernel using flashtool like shown above.
If you somehow do not have 4.0.4 firmware download it from here.
Click to expand...
Click to collapse
will this work on stock kernal and rom,
i have 2.3.4 android version with 2.6.32.9-perf kernal and build number is .62, bootloader locked.. can not unlock it
EDIT::
i have neo not the neov. i have mt15i i think
SSyar said:
is it also applicable on Neo MT15i ? ? ?
Click to expand...
Click to collapse
yes!
Raazax8 said:
will this work on stock kernal and rom,
i have 2.3.4 android version with 2.6.32.9-perf kernal and build number is .62, bootloader locked.. can not unlock it
EDIT::
i have neo not the neov. i have mt15i i think
Click to expand...
Click to collapse
this thread is for 4.0.4 android version but you may try the same steps on your device just with flashing .42 kernel, rooting with zergrush v4 method NOT this one and then reflashing .62 just be sure that nothing bad can happen to your phone if you flash just the kernel
buzzzy said:
this thread is for 4.0.4 android version but you may try the same steps on your device just with flashing .42 kernel, rooting with zergrush v4 method NOT this one and then reflashing .62 just be sure that nothing bad can happen to your phone if you flash just the kernel
Click to expand...
Click to collapse
so this does not make my neo in to ice cream sandwich model. i got that phone but try want to put ics in it.
i know how to flash root etc i done this before but i need to know a way to get ics on stock neo :/
thanks i will hit thanks if u help me here
Raazax8 said:
so this does not make my neo in to ice cream sandwich model. i got that phone but try want to put ics in it.
i know how to flash root etc i done this before but i need to know a way to get ics on stock neo :/
thanks i will hit thanks if u help me here
Click to expand...
Click to collapse
dude if you want ICS on your phone check this out!
download the tft from the 4.0.4 section. just make sure you download the correct ftf in this case for neo?
buzzzy said:
yes!
Click to expand...
Click to collapse
It´s possible to do this procedure without rooting ?
Tuga2010 said:
It´s possible to do this procedure without rooting ?
Click to expand...
Click to collapse
I'm not sure what you want to say. If you are asking about updating to ICS, rooting the phone is optional. Here is how you can update to ICS.
I must have ICS 4.0.4, for I can from 2.3.4.¿?
Sorry muy bad bad bad ... english.
joesser said:
I must have ICS 4.0.4, for I can from 2.3.4.¿?
Sorry muy bad bad bad ... english.
Click to expand...
Click to collapse
you must be on 4.0.4 but I posted a link in the previous posts how to update to 4.0.4 if it is still not available in your country.
Is The Kernel Updated To 3.0.x in ICS 4.0.4
Works!!!
I confirm that this works.
From 4.0.4 (4.1.B.0.431) then flashed the kernel (4.1.A.0.562) and followed the doomlords guide and back to (4.1.B.0.431).
Phone (Xperia NEO) rooted =) locked BL thanks man.
Ok I'm a noob. Where the hell is the thank button
ok i need to post first to see the thank button.
Works great.
I've bootlooped my phone several times before, with the other tuts, but this works great.
Works here, locked bootloader.
imranaryan said:
Is The Kernel Updated To 3.0.x in ICS 4.0.4
Click to expand...
Click to collapse
no.. but lets hope they will update it because as far as I know 3.0 is very battery friendly
ics 4.0.4 kernel
where is the link for ics 4.0.4 kernel?
i dont want to download the whole rom.
karan.26 said:
where is the link for ics 4.0.4 kernel?
i dont want to download the whole rom.
Click to expand...
Click to collapse
lol and how do you expect to have 4.0.4 if you don't want to download the whole rom?
you wanted to ask for a 4.0.3 kernel?
if yes, get it from here: http://forum.xda-developers.com/showpost.php?p=26798415&postcount=141
I meant,i am already on ics 4.0.4.
to root it,i need to flash first the kernel of 4.0.3 and then 4.0.4.
so,download link for 4.0.4 kernel?
karan.26 said:
I meant,i am already on ics 4.0.4.
to root it,i need to flash first the kernel of 4.0.3 and then 4.0.4.
so,download link for 4.0.4 kernel?
Click to expand...
Click to collapse
Ok, use same link above.
Guys,
Did anyone had luck flashing CM9 RC1 on Xperia Ray?
I'm struggling to get this working.
kgthenerd said:
Guys,
Did anyone had luck flashing CM9 RC1 on Xperia Ray?
I'm struggling to get this working.
Click to expand...
Click to collapse
i've tryied some time before, it works, but if i remember well i need to flash the fxp128 kernel.
paolinhos said:
i've tryied some time before, it works, but if i remember well i need to flash the fxp128 kernel.
Click to expand...
Click to collapse
That's lame.
I remember that I could use CM7 ROMs in my old Xperia X8 with stock kernel. It was a stupid move trying to unlock the bootloader to change kernel, I just bricked my phone.
I have tried, but it has some problems (automatic light sensor doesn't work for me) and wifi drops signal sometimes. Stay @ fxp 9.0 :cyclops:
El Brillantinas said:
That's lame.
I remember that I could use CM7 ROMs in my old Xperia X8 with stock kernel. It was a stupid move trying to unlock the bootloader to change kernel, I just bricked my phone.
Click to expand...
Click to collapse
You can use cm7 with stock kernel?
Really?
paolinhos said:
You can use cm7 with stock kernel?
Really?
Click to expand...
Click to collapse
I was running XRay Kernel on stock rom
it was good but i need CM9. But for some reason it is not working
paolinhos said:
You can use cm7 with stock kernel?
Really?
Click to expand...
Click to collapse
Yes, I did when I had my Xperia X8 alive. Check their section, they have a lot of ROMs based in CM7 Android 2.3.7 that work in stock kernel.The only neccesary things are root and CMW.
As I said, my big error was trying to unlock the bootloader just to use a ROM that needed a custom kernel, I don't know why I did it when other ROMs always worked fine, like GingerDX... I bricked my X8 forever, that's why I bought my Ray and I won't mess with the bootloader again.
I guess is due the different kernel architectures, or it's because SONY allowed to unlock bootloaders on the Xperia 2011 line, but it's very disappointing that most of the ROMs for Xperia Ray need unlocked bootloaders and customized kernels. That's why Hybrid 3.2, Superleggera and MIUI for locked bootloaders are a bless for us. @JJ Doctor, @arcatarc and @OatnezrA are true heroes :good:
El Brillantinas said:
Yes, I did when I had my Xperia X8 alive. Check their section, they have a lot of ROMs based in CM7 Android 2.3.7 that work in stock kernel.The only neccesary things are root and CMW.
As I said, my big error was trying to unlock the bootloader just to use a ROM that needed a custom kernel, I don't know why I did it when other ROMs always worked fine, like GingerDX... I bricked my X8 forever, that's why I bought my Ray and I won't mess with the bootloader again.
I guess is due the different kernel architectures, or it's because SONY allowed to unlock bootloaders on the Xperia 2011 line, but it's very disappointing that most of the ROMs for Xperia Ray need unlocked bootloaders and customized kernels. That's why Hybrid 3.2, Superleggera and MIUI for locked bootloaders are a bless for us. @JJ Doctor, @arcatarc and @OatnezrA are true heroes :good:
Click to expand...
Click to collapse
Dont know mate, I got ray and neo v on my table ready to get out of sony stock and for some reason i just cant install it on them.
May be i will never by an another sony phone again :angel:
In last 12hrs i tried almost everything, flashed FXP129 CM9 no luck, tried to flash official cm9 rc1 same thing no damn luck.
this ray is booloader unlocked via s1tool, rooted and has cwm recovery but i still cant flash any rom on it. It's frustrating :silly:
dont use FXP129 kernel its a bad kernel . and when you flash rom did you flash the kernel ? because CM9 RC1 kernel is also a bad kernel . the best working kernel is FXP 128 and the FXP128 rom .
-Jesco- said:
dont use FXP129 kernel its a bad kernel . and when you flash rom did you flash the kernel ? because CM9 RC1 kernel is also a bad kernel . the best working kernel is FXP 128 and the FXP128 rom .
Click to expand...
Click to collapse
as i say...
-Jesco- said:
dont use FXP129 kernel its a bad kernel . and when you flash rom did you flash the kernel ? because CM9 RC1 kernel is also a bad kernel . the best working kernel is FXP 128 and the FXP128 rom .
Click to expand...
Click to collapse
Thanks for the info mate, Now i'm on JJHybrid ROM with sirkay's XRay kernel. Working good lets see what happens :victory:
kgthenerd said:
Dont know mate, I got ray and neo v on my table ready to get out of sony stock and for some reason i just cant install it on them.
May be i will never by an another sony phone again :angel:
In last 12hrs i tried almost everything, flashed FXP129 CM9 no luck, tried to flash official cm9 rc1 same thing no damn luck.
this ray is booloader unlocked via s1tool, rooted and has cwm recovery but i still cant flash any rom on it. It's frustrating :silly:
Click to expand...
Click to collapse
What if you try to re-lock your bootloader?
Device : St15i
Sw: .42
Rooted and BL unlocked. I flashed Naa's latest kernel and i also flashed a bunch of roms with none of them worked.
Tried eRRo rom and blanks screen all the way. * waited 20 mins *
Also NextGen v3 it din't want to install it self...
And i tried to install these roms a couple times.
And sometimes i get a yellow light in led notification led. And sometimes reboot to recovery... anyone???
So you doing something wrong.
For example for: Viper Xperia V7 ROM
-Flash ICS kernel whatever you want I would prefer Kappa 1.6
-you need flash Official 4.1.B.0.587, Android 4.0.4 ICS
-And follow step by step to flash the ROM
I think I hleped
prototype1 said:
So you doing something wrong.
For example for: Viper Xperia V7 ROM
-Flash ICS kernel whatever you want I would prefer Kappa 1.6
-you need flash Official 4.1.B.0.587, Android 4.0.4 ICS
-And follow step by step to flash the ROM
I think I hleped
Click to expand...
Click to collapse
Thank you. I would give you a beer or a pizza if you were here
Spevky said:
Thank you. I would give you a beer or a pizza if you were here
Click to expand...
Click to collapse
This would be great :good: