Hi.
I just bought that phone I have problem to update to android 4.1.2 (I have tried by rds and file for motorol razr 910 but didn't work) so I'm looking for rds file with android 4.1.2 to fash it... please if someone have please send me a link... or maybe there is some other option how to do that ?
Any ideas will be more than welcome...
Regards,
siamer
[edit]
really no ideas how to do that ? I read that I should remove CID than my xt910s will be "normal" is it correct ? Please any help...
Hi.
Ok I removed CID and updated to 4.1.2 en.EU retail and is working almost evrything... the problem is that after RDS lite flash I coulden't start android because I was getting black screen with some errors (even fastboot was not working!) so I thgought that now I should try to flash differnt ROM to get working "bootloader" so I used asian ROM and it started and stop on step 6th but:
I can start system by doing: when starting open recovery and than can choose start normal way and than getting some screen with error that cid is wrong bla bla bla so waiting 10 seconds and system is starting
when I just pressing power button getting black screen with "ap fast boot flash mode (S) (Flash Failure) 0A.74 "
how can I just set do get straight that screen with cid problem... I have saved my old cid just in case...
any ideas ??
please help with that...
Related
Hi there,
Although a frequent reader, this i my first post and I NEED YOUR HELP.
Total loser that i am i accidently run the HimaClearJumpCode.exe on my himalaya instead of the HimaGetDeviceData.exe. And as you stated in another topic: (Warning: DO NOT under any circumstances copy and run HimaClearJumpCode.exe on your device as it will render it unbootable. It is used by the upgrade utility to put you device into bootloader mode prior to upgrading.)
I am now properly F*CKED, please help!!!!!!!!! (if there is a way out of this...) Please also note i do not have the proper country id code to install a new ROM ( Orange Netherlands), which is what started this mess.
Humbly hoping for your help...
Arnout
[email protected]
msn: [email protected]
fixed!
thanxs to evert-999 (thanxs, mate!!!!!) i was able to overcome the country id error and install wm2k5. After this everything works again!!!
Only thing weird is i still get a windows mobile 2003 screen when i reboot...does everybody have this?
ba bootloader serial v2.06
I suffered the same. so u have company.
Ifailed in my upgrade on my ba from radio rom v1.12 to v1.13. my ba got stucked in the bootloader mode in the course of upgrading.I cannot secure the ppc data. I have to downgrade it from rom v1.40 to v1.31 to FREE it b4 I upgrade back to rom v1.40 again with radio rom v1.12 I tried twice and the same thing occured. for the time being I have to be contented with my v1.40 and radio rom v1.12.
any insight on where I went wrong?
Stuck in bootloader
I GOT THE SAME PROBLEM-STUNK IN BOOTLOADER...WT CAN I DO??
IS IT GOING TO UPDATE THE ROM?? BUT GOT ANOTHER PROBLEM WHEN I UPDATE IT IN STEP 1 - ERASING THE ROM...STUCK AGAIN...THEN IT SAY ERROR 112.......
I REALLY NEED HELP...
ANYONE CAN HELP ME, PLz email me.....?
thx..
AKELA
[email protected]
After flashing my XDA2 to WM5 3.5a, i've tried merging storage & extended rom to gain memory by following a thread on Airfagev. After doing a hard reset, i found out that my phone is not responding and all i can see are black horizontal lines on the screen w/out backlight. I tried soft resetting it but still it stays the same.
Though i can still put it on bootloader mode, it also wont finish reflashing and an error message appears that goes like this:
ERROR 100: Model ID Error
The ROM image you are trying to use is not designed to work with your Pocket PC.
Is there any way for me to fix this problem? I really need help from anybody who's knowledgeable enough in solving this problem coz' i am new in this field.
Pls. help.
Thanks in advance!
Yoo can use NOID utility for flashing
HimaUpgradeUt_noID.exe
bootloader
Thank you. I can now reflash my device to WM2003 but not to WM5.I think it's because of the bootloader which is v 1.06.Is there any way to change this to v 1.03?
Help pls.
I have killed a touch dual (bad uspl - unlocking) now I have a bricked device ( in tricolors) could someone help me with this rom? (france rom)
please
For all OEM Roms -> http://netrunnerat.4shared.com/
This is a France OEM Rom -> http://www.4shared.com/file/37899406/68f31967/RUU_Nike_HTC_FR_13140609_Signed.html
thank you, man!
but now a have an other problem...
early I`ve tried to restore a original rom thru mtty command - task 32 and other commands.
now when I try to flash a fully original rom, device stuck in 0% upgraiding (I mean a grey backgroung flashing mode stuck in 0%... ) I think I enter a bad command thru mtty - could someone help me to restore original parametrs?
please.
Hi
Have you tried the command "boot" in mtty?
If you had unbricked your phone and are trying to change the Rom, don't forget to use USPL. Tell us if it works (or not ^^')
it show that in device no OS...
but problem left
Uhm ... bad ... the problem is ... at the moment i havent a full FR rom with all parts. what have you try?
MTTY have reboot your device? then its crashs or go back to bootloader? what roms have you try? what SPL version you see in bootloader?
NIKI100
SPL 1.16.0000
CPLD-4
a have added you in ICQ - could you go there, I`ll be wait you there - it`s faster, please.
send me a message
it`s seem to me that we have a bad france rom - cus I choose an other rom - Rus rom - process stopping on 2% - with ID-problem ) (I`m not make an Hardspl..)
could you check it?
Can you send me the link of this rom! I need it for my OEM Rom collection!
Next ... if it stops via 2% with ID Problem -> your device isnt cid unlocked!! This is your main Problem!
Yeah, I know it, I wrote that in my first message.
so, I could solve this problem if I have a flashing original rom.
history:
thank you, man!
but now a have an other problem...
early I`ve tried to restore a original rom thru mtty command - task 32 and other commands.
now when I try to flash a fully original rom, device stuck in 0% upgraiding (I mean a grey backgroung flashing mode stuck in 0%... ) I think I enter a bad command thru mtty - could someone help me to restore original parametrs?
it`s seem to me that we have a bad france rom - cus I choose an other rom - Rus rom - process stopping on 2% - with ID-problem ) (I`m not make an Hardspl..)
could you check it?
so could you flash your working device with francerom -to check - rom are flashing?
http://rapidshare.com/files/8878378....411.09_Radio_Nike_1.58.16.27_signed_Ship.exe
One question ... what was your first Rom on your phone? I want know the shipped rom!
touch dual - orange, france.
i cant explane ... no rom in my OEM folder can flash your device without Hardspl or uspl is installed!!! you need MTTY and use command "boot" to start your os! then you flash again! if your OS partition is deleted with useing Task 32 ... you have a problem!!! your device has a FR CID ... only a original FR rom can flash your device and i havent see a original FR rom in the moment! this is why i collect them! this is in a lot errors the best way to fix!
ok, but finally thanks for help.
ok, finally thanks for help.
I have a Niki100 that can't boot, it stops in the screen that shows "smart mobility" and at the bottom the info in red letters.
Here he shows
M 04
B 04
R 1.58.16.27
G 25.61.30.03H
D 1.31
I can boot it to the 3 colors screen, when connec't the cable at the white stripe it changes from serial to usb, but can't flash any rom it stops at 0% with error! At this screen it shows:
niki100
SPL-1.16.0000
CPLD-4
Already tried several official rom's some gives me ID error because it's locked to vodafone, but also tried an Vodafone spanish rom and got update error.
From the versions it's something wrong? It's not my pda I'm used to work with an Prophet, I don't know niki's spl, hard spl, etc... stuff...
Can anyone help?
Do a hard reset, if it boots then do hardspl and after flash rom of your choice.
Still the same! This is a rom problem...
Have you read any of the threads about flashing????; you have to HardSpl first your device before anything else, then the CID Unlock and then you can flash any ROM; (I recomend HardSpl 1.22)
I've the same issue ...
I've "hardspl" my device before ... but now no access at all to the device
it's stock on the HTC logo...
I can't go to the rainbow boot ... the PC don't see it
help please
carlosmozas said:
Have you read any of the threads about flashing????; you have to HardSpl first your device before anything else, then the CID Unlock and then you can flash any ROM; (I recomend HardSpl 1.22)
Click to expand...
Click to collapse
I get the pda already at this state... I didn't do anything yet to him!
I too have the same issue
I too tried many options... nothing working....
Still i have an option left, i heard that you can boot ROM from SD Card, this may help us to proceed further(avoid boot issues)... Let me try and update you
marciton said:
I've the same issue ...
I've "hardspl" my device before ... but now no access at all to the device
it's stock on the HTC logo...
I can't go to the rainbow boot ... the PC don't see it
help please
Click to expand...
Click to collapse
Already try the sd method and some roms tells wrong vendor other (Vodafone) just stays at "loading..."
No boot, the device is hung, no way out ...
marciton said:
I've the same issue ...
I've "hardspl" my device before ... but now no access at all to the device
it's stock on the HTC logo...
I can't go to the rainbow boot ... the PC don't see it
help please
Click to expand...
Click to collapse
I have the same issue:
after I have flashed new Insomnia 3.01 ROM,
the phone will not install any software first and than freezed.
After I have take the battery out and put it on again,
device has stopped responding and boots no more, shows HTC Logo with
radio version etc.
Could anybody help me?
Okay guy's, I'm not sure if this will help you or you already tried but read this http://forum.xda-developers.com/showthread.php?p=2183617 maybe this will help.
Wish you all GOODLUCK
I was trying to follow instructions here: http://forum.xda-developers.com/showthread.php?t=395945 to unlock my phone, I got as far as flashing the radio but at 95% done.. it failed. I have tried taking the battery out, hard resetting the phone but now whenever I go to flash the radio with 1.00.000.0 (in the instructions above) or my original radio 1.58.16.27 - it gets to the percentage screen and just hangs on 0%, then the ROM update utility says its failed. I've well and truly messed it up - when using the ROM update utility it's blank under current image version now and whenever I power on the phone it's always on the following boot screen:
NIKI200
SPL-1.16.0000
CPLD-4
I just can't do anything with it, help!!
Any help is much appreciated! Thanks
Try to flash the original rom
Have tried this, it does the same thing.. just hangs
Read this thread http://forum.xda-developers.com/showthread.php?t=390606
Thanks for your help, MTTY sorted this