problem... - LG Optimus L9 P760, P765, P768, P769

today i tried to do the official update in my lg l9 p760 (tried to update in v20c)...when the phone rebooted it went to clockwork...and it keeps rebooting there...i tried to flash kdz unsucesfull..and i also tried to restore a nandroid backup unsucesfull...any ideas???

nikos134 said:
today i tried to do the official update in my lg l9 p760 (tried to update in v20c)...when the phone rebooted it went to clockwork...and it keeps rebooting there...i tried to flash kdz unsucesfull..and i also tried to restore a nandroid backup unsucesfull...any ideas???
Click to expand...
Click to collapse
Check out Fastboot located somewhere around here. It can help with erasing user data, system, etc....then use the offline flashing method. Good luck!

I finaly did it...i was able to get my phone in spftware mode using cold-boot and then i used the oficial lg software update mode..and i did recovery..so if anyone has a similar probem and flasing ofline does not work he can try flashe it online using lg software

Related

[HELP]Hard Bricked Optimus L3 (e400) [PLEASE]

I recently rooted & flashed custom rom (CM 9) on my Optimus L3.Then i wanted to flash it back to stock after i got bored of the ICS rom, and followed a KDZ Updater guide, and now my device is bricked. If i try to turn it on, it will boot loop forever.The KDZ proccess was perfect, i had no errors (atleast i think i dont).I really need help to save my phone.
Used Windows7, had LG PC Suite IV Installed, i disabled LG Modem, I was in Emergency mode, .kdz used *V10H_00*.
no1thedark said:
I recently rooted & flashed custom rom (CM 9) on my Optimus L3.Then i wanted to flash it back to stock after i got bored of the ICS rom, and followed a KDZ Updater guide, and now my device is bricked. If i try to turn it on, it will boot loop forever.The KDZ proccess was perfect, i had no errors (atleast i think i dont).I really need help to save my phone.
Used Windows7, had LG PC Suite IV Installed, i disabled LG Modem, I was in Emergency mode, .kdz used *V10H_00*.
Click to expand...
Click to collapse
I also tried LGMDP, but it doesn't recognize my phone, since i somehow can't manage to install the drivers correctly since it can't boot..
format your phone by going into stock recovery.. i guess you can make it if you are getting your phone to bootloader
Sent from my GT-N7000 using Tapatalk 2

Cant get out of cwm

Hi i am using p760 stock rom jb , rooted and bootloader is unlocked and a new update come out v20i i think and i downloaded it there wass a message" if i want to install this click this the phone will reboot once or twice " but when the phone rebooting i got in to the cwm so i was like ok i clicked reboot system now expecting new update installed but it just get me in cwm again and again a try to remove the battery and turn on phone but it still gets me in the cwm, i tried to full wipe didnt help and backup didnt help too.What should i do ? please help
you need to restore your device by flashing KDZ file via LGMobile Support Tool...
here you'll find how to...
You can also use "Upgrade Recovery" option from LGMobile Support Tool so no need to follow the thread linked above, but with this method you'll completely erase your phone, internal SD card included
omg i am frustrated i cant get kdz method working just getting error after error , and i cant install lg support tool it is stuck while install , is there any other solutions ?

[Q] Problema With a P768g

Hello Guys, I need your help with a major problem with my phone a P768G, the thing is that i try to unlock my bootloader, I alredy made it once with another phone, so that wasn't so hard, for that I changed my stock kdz for V10A open europe for P760, and after that to V20A y succeed in the unlock, so I wanted to try CM11 so y fastboot and flash CWM, when I changed to CWM I wipe system, dalvik cache and all the things that the guide said but when I tried to flash the rom, I get a error that says status 7 and i get confused cause never get that before, i try to reboot to get more information and surprise get stucked at lg logo and bootloops, and back to CWM, i tryed to flash kdz from lg software but things stops at 15% and say that dont recognize my phone, also when i try to hard reset the phone just turn off, Im panicking and don't know what to do, I appreciate all your help. Sorry for my english but i dont get much practice.
fullking said:
Hello Guys, I need your help with a major problem with my phone a P768G, the thing is that i try to unlock my bootloader, I alredy made it once with another phone, so that wasn't so hard, for that I changed my stock kdz for V10A open europe for P760, and after that to V20A y succeed in the unlock, so I wanted to try CM11 so y fastboot and flash CWM, when I changed to CWM I wipe system, dalvik cache and all the things that the guide said but when I tried to flash the rom, I get a error that says status 7 and i get confused cause never get that before, i try to reboot to get more information and surprise get stucked at lg logo and bootloops, and back to CWM, i tryed to flash kdz from lg software but things stops at 15% and say that dont recognize my phone, also when i try to hard reset the phone just turn off, Im panicking and don't know what to do, I appreciate all your help. Sorry for my english but i dont get much practice.
Click to expand...
Click to collapse
What is the exact "Status 7 error" output?
Status 7 error can be caused by trying to install a ROM that is not specifically designed for your phone model a P768, and you try to flash a P760 CM11 ROM. When flashing that ROM the updater script checks the device model/ID and if it doesn't match that of the ROM being flashed, it will abort the installation.
Make sure that your flashing the proper CM11 ROM for your specific device.
Status 7 error can also be caused by, installing the wrong or improper CWM recovery version for your device and or ROM being flashed.
Double check that the recovery version you installed is the correct CWM recovery for your device and/or the CM11 ROM that your trying to flash. CM11 also requires a specific CWM recovery version to be flashed.
Thanks for your answer, I solved this way, I get back to the especific rom for my device, I can only do that trough the automatic lg support tool, cause when I tryed to flash get error of disconnected phone at 15%, later I saw that I need a specific recovery to flash the rom, so I downloaded and send it to the phone, after that I could flash the rom without problems and I'm now rocking my phone with KitKat :laugh:
Thank you. I was really scary but now I know that can get restored thru the lg utility.
Sorry for my english.
fullking said:
Thanks for your answer, I solved this way, I get back to the especific rom for my device, I can only do that trough the automatic lg support tool, cause when I tryed to flash get error of disconnected phone at 15%, later I saw that I need a specific recovery to flash the rom, so I downloaded and send it to the phone, after that I could flash the rom without problems and I'm now rocking my phone with KitKat :laugh:
Thank you. I was really scary but now I know that can get restored thru the lg utility.
Sorry for my english.
Click to expand...
Click to collapse
Awesome! Glad that you got your device fixed. :good:

My L7 II is stuck on emergency mode!

Hello,
I'm having the biggest problem I've ever faced with a device. I rooted it, installed CWM and installed CM. I wanted to install another rom, so I deleted everything. I went to install it but the phone had shut down. I turned it on but it ended up going in a bootloop. I tried to install a KDZ but without any luck. It is now stuck on emergency mode. ADB won't recognize it. Is there anything I can do?
an.punker said:
Hello,
I'm having the biggest problem I've ever faced with a device. I rooted it, installed CWM and installed CM. I wanted to install another rom, so I deleted everything. I went to install it but the phone had shut down. I turned it on but it ended up going in a bootloop. I tried to install a KDZ but without any luck. It is now stuck on emergency mode. ADB won't recognize it. Is there anything I can do?
Click to expand...
Click to collapse
Hello, please be more specific. What rom did you install, what files did you delete(wipes). What error is it giving, what kdz you tried.
I RECOMMEND you to re-download kdz because I once downloaded V10J KDZ from lg-phone-firmware.com but it was corrupted, so I downloaded one from a thread by maxx_hr(V20B) and it flashed without any errors.

Bootloop after Nandroid restore

Hey guys,
I made a nandroid backup with trwp as soon as I got it installed, now I wanted to sell the device and wanted to restore the nandroid, had at last the Fulmics Rom installed. I booted into trwp made a factory reset (that maybe was wrong), then I restored the backup, it got to 100% then it rebooted and I was in a bootloop.
When I booted into the recovery trwp was still there and I tried to wipe everything but it was not possible because I got an error that it's not mounted.
After that I tried to run an update throug LG Bridge, but every time it stops after 10% and it says that the device cannot be updated.
And now I cannot go into recovery, it always starts in Download Mode, I tried through LGUP but it doesnt recognize the Model, it says Unknown.
Fastboot is also not responding, just says waiting for any device. It's a European Model that was Vodafone branded.
I'm out of ideas, any thoughts or is it dead?
Try using LG Bridge, there is an option to reboot original recovery and then try LG Up.
Sent from my LG-H850 using Tapatalk
Stransky said:
Try using LG Bridge, there is an option to reboot original recovery and then try LG Up.
Sent from my LG-H850 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply, I fixed it with with Uppercut!!! I thought it was dead, but uppercut with LGUP worked.
I flashed the KDZ and then it had a system error when it booted up, I booted in recovery then and it erased everything and then it booted up normaly!!

Categories

Resources