can i flash this to page plus and still flash other roms - HTC Droid DNA

can i flash this to page plus and still flash other roms like cm10, aokp, miui and all those other guys
PLEASE HELP

?????Link missing?????

johnminator said:
can i flash this to page plus and still flash other roms like cm10, aokp, miui and all those other guys
PLEASE HELP
Click to expand...
Click to collapse
you meant the DNA as "this" ... yes you can flash it to Page Plus ( google it) PP only support 3G, CDMA so you can flash some ROMs no all
when you flash to PP it change the MEID, IMed etc.. so as long the Rom does not require any changes like APN setting or GSM Patches, it
will work ok. You will only need to flash VZW Roms in order to be supported on or by PP.
hope this help
Edit: The DNA have to be modified by the dealer, you will have to send the phone to them. U cant flash a 4G phone to PP through their Web Site.

Related

question i've heard about other LTE roms on our verizon note 2

ok, i unlocked my bootloader using adam's method .On beans rom 7, twrp installed ,working awesome added a couple mods but, my question is this now thats done can we really flash rom's from other us carriers? and, if we do will we have to flash the patch form SCOTTS,ROMS as a base or can we just flash entire rom with no additions ? I ask cause my i605 is set up for tmobile with global apn as, a system app thru titainium backup and is working fine with data but i would like to just go ahead and flash a tmobile rom but ,obviously dont wanna brick can anyone tell me if i can do this with out any issues and if i should expect issues what should i watch out for in a nut shell i want to just go with tmobile rom , not that theres anything wrong with my rom but would like a bit more choices ,NOT TO OFFEND ANY DEV'S of course. But could use a bit of direction i had seen ADAM'S post aboput but cant seem to get clairity on the subject thank you guys .i read to flash rom ,patch,kernel,then modenm , but if im not using verizon and deleted the ver. apns do i need to still in that order ,or at all
DAD12345 said:
ok, i unlocked my bootloader using adam's method .On beans rom 7, twrp installed ,working awesome added a couple mods but, my question is this now thats done can we really flash rom's from other us carriers? and, if we do will we have to flash the patch form SCOTTS,ROMS as a base or can we just flash entire rom with no additions ? I ask cause my i605 is set up for tmobile with global apn as, a system app thru titainium backup and is working fine with data but i would like to just go ahead and flash a tmobile rom but ,obviously dont wanna brick can anyone tell me if i can do this with out any issues and if i should expect issues what should i watch out for in a nut shell i want to just go with tmobile rom , not that theres anything wrong with my rom but would like a bit more choices ,NOT TO OFFEND ANY DEV'S of course. But could use a bit of direction i had seen ADAM'S post aboput but cant seem to get clairity on the subject thank you guys .i read to flash rom ,patch,kernel,then modenm , but if im not using verizon and deleted the ver. apns do i need to still in that order ,or at all
Click to expand...
Click to collapse
I'm on the Tmobile Jedi Rom with Saber Kernel and everything is fine.
Here's what you do:
put rom on SD Card
factory reset/wipe caches
install rom
install modem/radio
install Scott's patch
reboot
NOTE: It's recommended that you flash a Verzion kernel during the install. Even though Saber kernel is working, that doesn't mean that the other kernels from different carriers will work too.
Make sure that you DO NOT flash an International Note 2 rom. Stick with AT&T, Tmobile, and Sprint
ok where do i stick in the kernel
DroidOnRoids said:
I'm on the Tmobile Jedi Rom with Saber Kernel and everything is fine.
Here's what you do:
put rom on SD Card
factory reset/wipe caches
install rom
install modem/radio
install Scott's patch
reboot
NOTE: It's recommended that you flash a Verzion kernel during the install. Even though Saber kernel is working, that doesn't mean that the other kernels from different carriers will work too.
Make sure that you DO NOT flash an International Note 2 rom. Stick with AT&T, Tmobile, and Sprint
Click to expand...
Click to collapse
Ok thank you so do i install all in one flash, and which order do i put the kernel in in that sequence lol .. just super wanna make sure but thank you good s**t:good:

[Q] what is my atrix 4g status?

Thank you for the answer for the old question.
I want to install http://forum.xda-developers.com/showthread.php?t=2167927 this.
I have epinter CM10.1 now.
What I need to do?
Do I need just enter the CWM and wiped everything and then flash the zip file?
or I need to do something more?
OLD:
I rooted my device with some quick root tool. (I don't remember where I found the guild).
I have unlocked my bootloader too. (I don't really remember but I think I made that with a guild from androidadvices. His title is :"How to Unlock Motorola Atrix 4G Mobile Phone")
My device is bought from ORANGE. (I think that I belong to Bell's group of ROMs. not AT&T).
I have flashed CM10 by epinter and then CM10.1 by epinter.
Now I want to give the phone to my little brother and I want to flash a ROM with all the webtop apps and blur apps.
I want a ROM with the minimum bugs. I prefer based of official 2.3.6 ROM
What ROM can you suggest me?
Do I need to do some changes with the phone before wipeing everything in the CWM and flashing ROMs ?
Thanks ahead.
This is based on 2.3.6 and is an updated version of a rom that many of us used for a long time as our daily driver.
http://forum.xda-developers.com/showthread.php?t=2167927
mizaro said:
I rooted my device with some quick root tool. (I don't remember where I found the guild).
I have unlocked my bootloader too. (I don't really remember but I think I made that with a guild from androidadvices. His title is :"How to Unlock Motorola Atrix 4G Mobile Phone")
My device is bought from ORANGE. (I think that I belong to Bell's group of ROMs. not AT&T).
I have flashed CM10 by epinter and then CM10.1 by epinter.
Now I want to give the phone to my little brother and I want to flash a ROM with all the webtop apps and blur apps.
I want a ROM with the minimum bugs. I prefer based of official 2.3.6 ROM
What ROM can you suggest me?
Do I need to do some changes with the phone before wipeing everything in the CWM and flashing ROMs ?
Thanks ahead.
Click to expand...
Click to collapse
Nottachtrix for sure will be the best option, there is another v2 version with a lot of things in the installer
coolloser said:
This is based on 2.3.6 and is an updated version of a rom that many of us used for a long time as our daily driver.
http://forum.xda-developers.com/showthread.php?t=2167927
Click to expand...
Click to collapse
joelorona said:
Nottachtrix for sure will be the best option, there is another v2 version with a lot of things in the installer
Click to expand...
Click to collapse
Wow, The answer is given very quickly and it very good. Thank you both
Do I need to do some changes with the phone before wipeing everything in the CWM and flashing ROMs ?

new to the forum and device

Hi, just bought an og ,coming from HTC phone. There r some new things it looks like. What is a EFS ? Back up EFS partition ? I'm gonna used the my att og on straight talk , any things I should watch out for ? Should stay 100 % stock until service is activated? I'm looking for a near stock stable optimized rom, any to recommend ? Which kernel is good for it ? Htcs have hboot , it looks like lgs use different things , how do I go around flashing radios ? Excuse me for throwing out tons of noob questions , gonna start somewhere
0 help lol
Welcome. There is a zip file that you put on your external SD card somewhere in the optimus g forums that will backup your efs partition.
Edit: I found it for you if you haven't had any luck finding it. Also.. The efs supposedly holds your imei number and stuff.
http://forum.xda-developers.com/showthread.php?t=2164749
Sent from my Optimus G using xda app-developers app
Ic, so how would EFS be deleted ? always just had CDMA phones, never heard of ESNs deleted by mistake. Are radios to be flashed in recovery too ? My HTC flashes radios in fastboot.
Optimus 3D
optimusv45 said:
Ic, so how would EFS be deleted ? always just had CDMA phones, never heard of ESNs deleted by mistake. Are radios to be flashed in recovery too ? My HTC flashes radios in fastboot.
Click to expand...
Click to collapse
It is real, there are a lot of hard bricks because of it, look in the Optimus 3D P920 forum, a lot people lost their IMEI and couldn't get it going. And yes, you can flash different radios
whats a very stable and optimized near stock rom for this phone ? what kernel can go with it ?
optimusv45 said:
whats a very stable and optimized near stock rom for this phone ? what kernel can go with it ?
Click to expand...
Click to collapse
MysteryEmotion's eg8 ROM is the newest and may have the best chance of being actively maintained in the future. He also builds his own kernel with tweaks.
Ic, what version android is MysteryEmotion's eg8 ROM ? Has anyone tried houstonn's Stock 4.1.2 Jelly Bean LG-E970 At&t ? I don't need the latest version android or anything , mostly seeking for stability and everything work.
optimusv45 said:
Ic, what version android is MysteryEmotion's eg8 ROM ? Has anyone tried houstonn's Stock 4.1.2 Jelly Bean LG-E970 At&t ? I don't need the latest version android or anything , mostly seeking for stability and everything work.
Click to expand...
Click to collapse
Mystery's eg8 is based on 20j 4.1.2 stock with addons and enhancements. I think Houstonn's is a port from another OG that was released with jellybean before AT&T got the update.
Can you please clarify a bit? Do you mean stock LG or stock Google/Android.
Stock LG: Either go with MysteryEmotion's eg8 Or SnowJBLeaopard's SnowJB -almost forgot SlickRom, that is super debloated, but not really to my liking. (forgot who posted it)
Stock Google/Android: Either Shelnutt's Unofficial 10.1 Or houstonn's Vanilla Rootbox. The latter has a lot of "bells and whistles" while the former is basically stock. Also should mention TuxAttack's Beanstalk. Also a lot of bells and whistles though.
optimusv45 said:
whats a very stable and optimized near stock rom for this phone ? what kernel can go with it ?
Click to expand...
Click to collapse
Personally I would go with dvhexers CM 10.1.2, and his included kernel is quite good. This is stock android/CM though, with a bit of searching and patience you can run LG Home on top of this, with the original weather/clock and calendar.
i.e.
http://forum.xda-developers.com/showthread.php?t=2198225
So then you have the best of both. Too many options for you not to get out there any try a few. But @dvhexers CM10.1 I think was perfectly stable.
I am using the JellyBean ROM. I have been on it for about a month now and haven't had any issues that wasn't caused by me
Though, other than that I suggest mysteryemotionz
okay, I'll probably go with ME eg8 and his V6.1 kernel for 4.1.2. just being on the safe side , should i flash a JB radio for this rom ? if yes, do i flash in RECOVERY ? i have found a radio called CWM-ATTJB-Radio, is this the right one ? I am being carefully about this because my HTC flash radios in Hboot with PG86IMG files... as far as flashing kernel, do u guys recommend flashing with Flash Image GUI for this phone ? and is wiping Dalvik always needed for flashing kernels for this phone ? i thanked everyone that helped.
theregkid said:
I am using the JellyBean ROM. I have been on it for about a month now and haven't had any issues that wasn't caused by me
Though, other than that I suggest mysteryemotionz
Click to expand...
Click to collapse
Hi theregkid, a month of stability is very good. can you tell me which JellyBean ROM you are referring to ? ME's eg8 ?
optimusv45 said:
Hi theregkid, a month of stability is very good. can you tell me which JellyBean ROM you are referring to ? ME's eg8 ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2359068
Sorry, for some reason I called the ROM 'Beanstalk' Jellybean.
It was ported from the infuse 4G. I have tried just about every ROM and this one is my favorite.
Maybe it is just me, but again I haven't had any real issue with it. I did have a kernel crash from MysteryEmotionz kernel though. I then flashed Smoochas and all is good.
The crash occurred whenever I tried to run a QR code app. (any QR code app)
optimusv45 said:
okay, I'll probably go with ME eg8 and his V6.1 kernel for 4.1.2. just being on the safe side , should i flash a JB radio for this rom ? if yes, do i flash in RECOVERY ? i have found a radio called CWM-ATTJB-Radio, is this the right one ? I am being carefully about this because my HTC flash radios in Hboot with PG86IMG files... as far as flashing kernel, do u guys recommend flashing with Flash Image GUI for this phone ? and is wiping Dalvik always needed for flashing kernels for this phone ? i thanked everyone that helped.
Click to expand...
Click to collapse
ME's eg8 is modified stock, it should come with his kernel already. Yes the radio's flash in CWM as zips, you can manually push with ADB/Fastboot commands, but why bother.
What are you referring to by "Flash image GUI" ? If you mean "clockwork mod recovery" or "TWRP" then yes. Once you download the freegee app from the market, it will give you the option for either, choose which ever you like more, personally I prefer CWM. Yes always wipe dalvik cache after you flash a kernel, so it can recreate the DEX files for that particular kernels methods of execution.
[r.]GimP said:
ME's eg8 is modified stock, it should come with his kernel already. Yes the radio's flash in CWM as zips, you can manually push with ADB/Fastboot commands, but why bother.
What are you referring to by "Flash image GUI" ? If you mean "clockwork mod recovery" or "TWRP" then yes. Once you download the freegee app from the market, it will give you the option for either, choose which ever you like more, personally I prefer CWM. Yes always wipe dalvik cache after you flash a kernel, so it can recreate the DEX files for that particular kernels methods of execution.
Click to expand...
Click to collapse
Flash image GUI is an image flashing app from the market. MiRaGe, known for his rom and kernel works for Optimus V and HTC Evo V 4G, recommends flashing his kernels with this app. I have been using it to flash kernels. So i was just wondering if this would work with kernels for this phone , i guess every phone is different.
optimusv45 said:
Flash image GUI is an image flashing app from the market. MiRaGe, known for his rom and kernel works for Optimus V and HTC Evo V 4G, recommends flashing his kernels with this app. I have been using it to flash kernels. So i was just wondering if this would work with kernels for this phone , i guess every phone is different.
Click to expand...
Click to collapse
I'm not familiar with those apps, and don't recall seeing them mentioned here at all. FWIW, I personally avoid any apps that flash things. They may make things convenient, but I've seen too many issues caused on too many devices by apps that flash stuff.
Just read the relevant threads to learn about what you are doing, and flash manually from recovery. That way, you're in control of what you're doing. Less chance of snafus caused by incompatibilities...
i am in complete stock . rg8 is 700 mb ?.... most roms i use for my HTC are around 150..
Thanks everyone for all the help. Now I'm running eg8 , everything seems fine execept the first time I took a picture had a very strange crash. The screen went blank and codes started rolling up the screen , it went on for about 3 minutes then phone restarted itself ...

[Q] Can I remove radio .zip from Cyanogenmod 10.2?

So I flashed my HTC Droid DNA to Page Plus Cellular. That worked out all fine and dandy, however, the guy I paid to do this service for me warned me that if I flash a custom ROM it would break the radio flash. I had actually pre-flashed Cyanogenmod prior to flashing PPC, but he had me restore stock Andriod because, evidently, Cyanogenmods 10 and 11 do not include DIAG mode. So, my quesion is, IF I remove whatever .zip from the Cyanogenmod package that contains radio information, AND THEN flash Cyanogenmod using TWRP, would this break my carrier flash to PPC??? Thanks in advance for any help.
JACKc2402 said:
So I flashed my HTC Droid DNA to Page Plus Cellular. That worked out all fine and dandy, however, the guy I paid to do this service for me warned me that if I flash a custom ROM it would break the radio flash. I had actually pre-flashed Cyanogenmod prior to flashing PPC, but he had me restore stock Andriod because, evidently, Cyanogenmods 10 and 11 do not include DIAG mode. So, my quesion is, IF I remove whatever .zip from the Cyanogenmod package that contains radio information, AND THEN flash Cyanogenmod using TWRP, would this break my carrier flash to PPC??? Thanks in advance for any help.
Click to expand...
Click to collapse
In theory it should work..... replace the cm10 radio with the ppc radio(if compatible with cm) then flash as normal. It's not suggested you do this but it is interesting I would look into flashing radios and such first and make a backup of it current radio and all necessary files along with it... And always make a nandroid before you flash anything just in case... Although I could be wrong I'm not sure I don't mess with radios much...... (all in the name of discovery)
Sent from my HTC6435LVW using Tapatalk 2
Ok edit: was doing some research I guess you can do it to any rom except cm based (unless you get the cm team help you because I'm sure it's possible) was looking around The threads and found how to flash to Page Plus and resulting working on custom Rom.
Sent from my HTC6435LVW using Tapatalk

Do I Need GApps? HELP :(

So I Download A PORT ROM that did not require GApps to be flashed!
But For My Base ROM i got A CyanogenMOD that does require GApps To Be Flashed
"I ported it successfully but its 300MB+ Approx and While Compressed is 250MB."
So i imported "port files" TO "base Cyanogen", do i need to flash GApps WITH IT OR NOT?
I Think Not because all Port Apps are Transferred to Base Apps Right?
Thankyou, Regards "e-mTz303" with your Help I'll Be Able To Release The ROM! Just some Confusions
No idea.
e-mtz said:
So I Download A PORT ROM that did not require GApps to be flashed!
But For My Base ROM i got A CyanogenMOD that does require GApps To Be Flashed
"I ported it successfully but its 300MB+ Approx and While Compressed is 250MB."
So i imported "port files" TO "base Cyanogen", do i need to flash GApps WITH IT OR NOT?
I Think Not because all Port Apps are Transferred to Base Apps Right?
Thankyou, Regards "e-mTz303" with your Help I'll Be Able To Release The ROM! Just some Confusions
Click to expand...
Click to collapse
I have no idea and hope someone joins the thread.
But good luck--what you're doing sounds exciting.
I'm Gonna Flash
pbergonzi said:
I have no idea and hope someone joins the thread.
But good luck--what you're doing sounds exciting.
Click to expand...
Click to collapse
This is Where I Get Startled. I make my ROM, and even i don't want to Flash it, Its just that its my First Phone and i seriously don't want it getting Bricked. After 2, 3 Months If I get The Xperia Z1 , I'm Gonna Try not to break this phone with my ROM's
Until Then why don't you try my prev. Amaze ROM. "WARNING PHONE MAY BRICK"
Here's The Link
http://forum.xda-developers.com/amaze-4g/development/rom-ultimate-rom-v1-0-1-t3114155
idunno about that
e-mtz said:
This is Where I Get Startled. I make my ROM, and even i don't want to Flash it, Its just that its my First Phone and i seriously don't want it getting Bricked. After 2, 3 Months If I get The Xperia Z1 , I'm Gonna Try not to break this phone with my ROM's
Until Then why don't you try my prev. Amaze ROM. "WARNING PHONE MAY BRICK"
Here's The Link
http://forum.xda-developers.com/amaze-4g/development/rom-ultimate-rom-v1-0-1-t3114155
Click to expand...
Click to collapse
You want others to flash the rom you're hesitant to flash?
There is an unbricking project.
I am currently using a OnePlus One--gone are my days of flashing on the Amaze 4G..., I think.

Categories

Resources