HTC Flyer stuck on hboot bootloop - HTC Flyer, EVO View 4G

Hello everyone,
I flashed dexter's jb rom, and missed a step. It would bootloop into htc screen and nothing else. I was able to access clockwork mod and hboot. I uninstalled clockwork mod and re-locked it, so I could use ruu. Now, it won't do anything else other than boot into hboot and turn restart. The light blinks orange a few times, boots and then reboots.
I tried a thread with a similar incident, but it seems like my case is unique. Any help would be appreciated.

destruktor said:
Hello everyone,
I flashed dexter's jb rom, and missed a step. It would bootloop into htc screen and nothing else. I was able to access clockwork mod and hboot. I uninstalled clockwork mod and re-locked it, so I could use ruu. Now, it won't do anything else other than boot into hboot and turn restart. The light blinks orange a few times, boots and then reboots.
I tried a thread with a similar incident, but it seems like my case is unique. Any help would be appreciated.
Click to expand...
Click to collapse
im stuck in the same boat can someone please help us, i've pretty much had a expensive paperweight ever since we bought it

@destruktor Are you S-OFF? S-ON? Bootloader locked or unlocked? Which HBOOT?

I have the same issue, device is now relocked and s-on with hboot 1.11.0011.
I can't seem to find an RUU with hboot 1.11.0003 or 1.11.0000 so that I could s-off again with revolutionary.

yahavrave said:
I have the same issue, device is now relocked and s-on with hboot 1.11.0011.
I can't seem to find an RUU with hboot 1.11.0003 or 1.11.0000 so that I could s-off again with revolutionary.
Click to expand...
Click to collapse
Maybe you should put HC and make sure that it works, in a first time. After that, it will be easier to downgrade &S-OFF it !

djcarlos7777 said:
Maybe you should put HC and make sure that it works, in a first time. After that, it will be easier to downgrade &S-OFF it !
Click to expand...
Click to collapse
I've tried every HC version I could put my hand on but even though installation via RUU seems to finish successfully,
Android does not start, I keep getting a boot-loop.

i have the exact same problem but it hapenned in a different way... i think my battery died, then while it was dead, i put it on the charger, and then it just went in a bootloader loop.... it goes in the bootloader for 1 or 2 seconds, then it restarts, it goes to the bootloader again for 1-2 seconds again and again... it goes on until i pull the power cable... as soon as i plug it to the power, it starts looping like that and never stops for hours...:crying:

@yahavrave : You have several options : you can try to install a custom ROM or, if you're under HC with 1.11.0011, there many tutos to learn how to downgrade to GB everywhere.
@lebs4life : Hold Power button during 10sec, the phone will Power OFF & Reboot, but before it reboots : hold Power button + Volume down to enter in the Fastboot menu. There, you will be able to turn off you're phone, enter in the Recovery to flash a new ROM, ect

Related

S-off achieved, but now phone's a brick

I managed to get s-off, but my phone would not boot. I was stuck on a screen that said "JuopunutBear" with an arrow. I did the internal storage fix, now the phone is really screwed. I'm stuck on a white screen with "HTC". I can't boot to recovery and the PC won't recognize phone so ADB commands don't work. Any help would be appreciated.
lithium630 said:
I managed to get s-off, but my phone would not boot. I was stuck on a screen that said "JuopunutBear" with an arrow. I did the internal storage fix, now the phone is really screwed. I'm stuck on a white screen with "HTC". I can't boot to recovery and the PC won't recognize phone so ADB commands don't work. Any help would be appreciated.
Click to expand...
Click to collapse
Get one of the old GB RUU's and run it on your phone. Start again. If your phone was truly bricked, it wouldn't power on and you wouldn't get an LED light when it was plugged in.
lithium630 said:
I managed to get s-off, but my phone would not boot. I was stuck on a screen that said "JuopunutBear" with an arrow. I did the internal storage fix, now the phone is really screwed. I'm stuck on a white screen with "HTC". I can't boot to recovery and the PC won't recognize phone so ADB commands don't work. Any help would be appreciated.
Click to expand...
Click to collapse
This is an easy one, or would have been when you were on the black screen. Well the internal storage fix scares me, but hopefully that wont matter. Typically all you need to do is get the PH file from your rom and place on sd card, boot into hboot, and run the update I believe, then reboot.
This title needs to be edited as it's misleading.
lithium630 said:
I managed to get s-off, but my phone would not boot. I was stuck on a screen that said "JuopunutBear" with an arrow. I did the internal storage fix, now the phone is really screwed. I'm stuck on a white screen with "HTC". I can't boot to recovery and the PC won't recognize phone so ADB commands don't work. Any help would be appreciated.
Click to expand...
Click to collapse
Relax. The S-off process blows out your recovery. You didn't brick your phone.
Put a recovery image on your SD card, go into hboot (from a powered down state, power button and volume down) and let 'er reload recovery. If you can't get the file on your SD card through your phone, pop the SD card into a card reader attached to your PC and stick it on there that way.
Once that's done, remove the image file from your SD card, put your fav ROM on it, and install it from recovery.
You may need to fix your SD card's mount points. Within the thread on S-off, there's a link to the process.
None of the commands work because the phone is not recognized. I cannot boot to hboot. Uh oh.
I had the same screen. Pull the battery and reboot into hboot, volume down+power and run the s-off program again. Something didn't finish and it will pick up where it left off in my experience.
lithium630 said:
None of the commands work because the phone is not recognized. I cannot boot to hboot. Uh oh.
Click to expand...
Click to collapse
What happens when you press power+volume down?
Edit: Also, if you're phone turns on, you're not bricked. It's pretty hard to brick this phone.
tekhna said:
What happens when you press power+volume down?
Edit: Also, if you're phone turns on, you're not bricked. It's pretty hard to brick this phone.
Click to expand...
Click to collapse
Yeap just pull the battery and power on with power and volume down.
This kinda stuff you'll be fine with. Just don't get too creative with "repairs" that aren't posted in here.
tekhna said:
What happens when you press power+volume down?
Edit: Also, if you're phone turns on, you're not bricked. It's pretty hard to brick this phone.
Click to expand...
Click to collapse
As I understand it, the only way to brick a phone is to bork a radio installation.
Dude...pull your battery, put it back in, then power and volume down at the same time. If you can get to hboot, life is good.
After about 30 battery pulls I was able to get to hboot. I have no idea what the issue was. Finally got the phone booting now. I appreciate the replies.
lithium630 said:
After about 30 battery pulls I was able to get to hboot. I have no idea what the issue was. Finally got the phone booting now. I appreciate the replies.
Click to expand...
Click to collapse
Awesome, glad to hear. Did the s-off work?
tekhna said:
Awesome, glad to hear. Did the s-off work?
Click to expand...
Click to collapse
Sure did. Took me a little while to get the wire trick right. I just noticed the sd card is not recognized. I see the fix on the thread. That will be tomorrows project.
Constant reboots
I am able to install roms, but I get constant reboots, every few minutes at best. I tried a few different ICS ROMS. I am running the latest firmware. I BELIEVE with s-off I shouldn't have to flash PH98IMG.zip. I tried fixing permissions also but it has not helped.
How did you get the latest firmware and radios without running the PH98IMG.zip? The ics roms you are installing won't update your firmware.
Sent from my ADR6425LVW using Tapatalk 2
Chillerman said:
How did you get the latest firmware and radios without running the PH98IMG.zip? The ics roms you are installing won't update your firmware.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I relocked the phone and updated it a couple weeks ago. Maybe I need to try it again.
lithium630 said:
I relocked the phone and updated it a couple weeks ago. Maybe I need to try it again.
Click to expand...
Click to collapse
Well the newest leak came out 5/7 and the one before that 5/2 so only a week ago. I would download the newest from Android Police and follow the instructions they give to install, then flash a recovery and install a rooted Rom for this firmware like Scott's.
Sent from my ADR6425LVW using Tapatalk 2
lithium630 said:
I relocked the phone and updated it a couple weeks ago. Maybe I need to try it again.
Click to expand...
Click to collapse
I don't know why you relocked...I think there's a thread about not so good things happening to those who relock after S-off. I downloaded and installed the 5/5 leak as PH98IMG after I S-off'd and reflashed the recovery.
I'm pretty sure my hboot said "locked" straight out of the gate after I did the S-off deed.
douger1957 said:
I don't know why you relocked...I think there's a thread about not so good things happening to those who relock after S-off. I downloaded and installed the 5/5 leak as PH98IMG after I S-off'd and reflashed the recovery.
I'm pretty sure my hboot said "locked" straight out of the gate after I did the S-off deed.
Click to expand...
Click to collapse
Nothing bad happens, you just don't ever get back to "locked" without doing S-off again. You're just at "relocked" like the old days. S-on with an eng hboot on the other hand will brick your device.
That aside, there's no need to unlock if you're S-off. Either flash a patched hboot or just flash a PH98IMG.zip of AmonRa if you don't need fastboot commands (I did the latter).
I flashed the last firmware before S-off. I followed the instructions given. I flashed the latest firmware today and this damn thing still reboots constantly. I flashed the 5-7 firmware then the Venasaur Rom.
lithium630 said:
I flashed the last firmware before S-off. I followed the instructions given. I flashed the latest firmware today and this damn thing still reboots constantly. I flashed the 5-7 firmware then the Venasaur Rom.
Click to expand...
Click to collapse
You need to try installing the radio firmware or just install the complete RUU again. And install a clean copy of the rom, not a nandroid backup. Wipe data, cache, dalvic cache, and system before flashing the rom.
Send me a private message if you would like and I'll help you get it figured out on gtalk.

[Q] Hardware failure? Unable to RUU.

Hello all, I need some help if there are any ideas what could be going on with this phone. I can usually fix my own phone problems, but this one has stumped me...
I bought a rezound dirt cheap that was stuck on the white HTC screen and would not boot into the stock rom. At the time I bought it, it was s-on and I could get in the HBOOT and run fastboot commands.
Since buying it, I have tried many things to get this thing working. I've tried to RUU (with PH98IMG and .exe) and apparently after it completes it is once again in a boot loop on the white HTC screen. I have been able to unlock and flash a custom recovery onto it (amon-ra) and install any cm/aokp rom onto it and boot into that. The only issue with that is when in the rom, my wifi and bluetooth will not connect at all. It wont even toggle on in settings and it is not greyed out. 4G and everything else seems to work ok.
At this time, I'm thinking there is some kind of hardware failure but I'm open to suggestions.
In summary...
I have been able to s-off
I have tried different firmware combos of HBOOTs/radios
I have flashed custom recoveries and roms and can boot into them without wifi or bluetooth
I have been unsuccessful to RUU to anything stock, it'll just boot loop the white HTC screen
Right now, I have installed Tron 2.1 onto it. I did notice post:http://forum.xda-developers.com/showthread.php?t=2272781&highlight=no+wifi
When I go into system/lib, there was no /modules folder. I went ahead and created it and put in bcmdhd.ko and rebooted, but still no go. I'm not sure why the /modules folder was missing, but this reaches the extent of my knowledge on what is supposed to be there.
I believe I have tried everything and done fairly thorough searches to get this phone working properly and am at a loss what to do next. If anybody has a thought of something to try, I'm all for it. Fortunately if this phone doesnt work out, its not a big deal to me.
I don't want this to sound like another "stuck on HTC screen" thread. I have been through all those and this doesn't seem like the same problem.
Your help is greatly appreciated!
tacoman said:
Hello all, I need some help if there are any ideas what could be going on with this phone. I can usually fix my own phone problems, but this one has stumped me...
I bought a rezound dirt cheap that was stuck on the white HTC screen and would not boot into the stock rom. At the time I bought it, it was s-on and I could get in the HBOOT and run fastboot commands.
Since buying it, I have tried many things to get this thing working. I've tried to RUU (with PH98IMG and .exe) and apparently after it completes it is once again in a boot loop on the white HTC screen. I have been able to unlock and flash a custom recovery onto it (amon-ra) and install any cm/aokp rom onto it and boot into that. The only issue with that is when in the rom, my wifi and bluetooth will not connect at all. It wont even toggle on in settings and it is not greyed out. 4G and everything else seems to work ok.
At this time, I'm thinking there is some kind of hardware failure but I'm open to suggestions.
In summary...
I have been able to s-off
I have tried different firmware combos of HBOOTs/radios
I have flashed custom recoveries and roms and can boot into them without wifi or bluetooth
I have been unsuccessful to RUU to anything stock, it'll just boot loop the white HTC screen
Right now, I have installed Tron 2.1 onto it. I did notice post:http://forum.xda-developers.com/showthread.php?t=2272781&highlight=no+wifi
When I go into system/lib, there was no /modules folder. I went ahead and created it and put in bcmdhd.ko and rebooted, but still no go. I'm not sure why the /modules folder was missing, but this reaches the extent of my knowledge on what is supposed to be there.
I believe I have tried everything and done fairly thorough searches to get this phone working properly and am at a loss what to do next. If anybody has a thought of something to try, I'm all for it. Fortunately if this phone doesnt work out, its not a big deal to me.
I don't want this to sound like another "stuck on HTC screen" thread. I have been through all those and this doesn't seem like the same problem.
Your help is greatly appreciated!
Click to expand...
Click to collapse
i would like you to do the following.
flash this http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
2 times. it will make sure we have a solid base to work on.
after that has ran 2 times. boot into the stock rom one time.
after that flash this https://dl.dropboxusercontent.com/u/12405441/new.global.firm.PH98IMG.zip
once this is done let it boot into the rom.
from here you should be good to flash any rom that is out there to date. (note please dont restore any system data, only app data)
ALSO MAKE SURE YOU HAVE 100% battery. doing an ruu can brick the phone if its interrupted.
report back when done
Thanks for replying. I have flashed that RUU several times in a row in the past, but I'm redownloading it now to make sure my copy isnt corrupt. Earlier experience when I double flashed this it still remained a white HTC screen loop.
Currently estimated at 6hrs to download, so I wont be able to reply for a bit with my findings...
tacoman said:
Thanks for replying. I have flashed that RUU several times in a row in the past, but I'm redownloading it now to make sure my copy isnt corrupt. Earlier experience when I double flashed this it still remained a white HTC screen loop.
Currently estimated at 6hrs to download, so I wont be able to reply for a bit with my findings...
Click to expand...
Click to collapse
When the Rezound first came out a bunch of people had boot loop problems because the phone was set to wcdma or some such thing instead of cdma. I'm just a noob hack but that's my memory of it. The cure was to boot without the back cover on which contains the antenna and then change the setting.
Ok, I have re downloaded the AndroidPolice RUU and flashed twice, but was not able to boot into it no matter how long I waited (20 min+). It would just loop the HTC white screen. I then went ahead and flashed your global update firmware and have the same result after waiting (20 min+), it just loops the HTC white screen.
I have tried this process several times last night, but still no progress.
As the phone sits now:
*** UNLOCKED ***
VIGOR PVT SHIP S-OFF RL
HBOOT-2.28.0000
RADIO-2.23.10.0123r/2.23.10.0124r
OpenDSP-v14.6.0.7708.00.0507
eMMC-boot
Sep 20 2012, 17:40:22
tacoman said:
Ok, I have re downloaded the AndroidPolice RUU and flashed twice, but was not able to boot into it no matter how long I waited (20 min+). It would just loop the HTC white screen. I then went ahead and flashed your global update firmware and have the same result after waiting (20 min+), it just loops the HTC white screen.
I have tried this process several times last night, but still no progress.
As the phone sits now:
*** UNLOCKED ***
VIGOR PVT SHIP S-OFF RL
HBOOT-2.28.0000
RADIO-2.23.10.0123r/2.23.10.0124r
OpenDSP-v14.6.0.7708.00.0507
eMMC-boot
Sep 20 2012, 17:40:22
Click to expand...
Click to collapse
You need stock recovery and a locked bootloader
- "Is it dark in there?"
drynyks said:
You need stock recovery and a locked bootloader
- "Is it dark in there?"
Click to expand...
Click to collapse
S/he ran the RUU so they are stock.
Sounds like the symptoms of a kernel issue. Try pulling the boot.img from this stock OTA ROM and flashing it.
http://forum.xda-developers.com/showthread.php?t=2260154
fastboot flash boot boot.img
I have the exact same you. Been this way for months. Maybe once a month BT/Wifi will turn on but only for a few hours maybe. Phone will reboot itself and come back up with the 2 broken again.
feralicious said:
S/he ran the RUU so they are stock.
Sounds like the symptoms of a kernel issue. Try pulling the boot.img from this stock OTA ROM and flashing it.
http://forum.xda-developers.com/showthread.php?t=2260154
fastboot flash boot boot.img
Click to expand...
Click to collapse
Well I finally booted into stock sense after flashing that boot.img which is a big step from before. For a brief moment, it saw wifi networks in my office but when I went to connect to one, wifi died and it no longer sees any wifi network. Bluetooth appears to still be an issue as well, i.e. will not turn on.
Flyhalf205 said:
I have the exact same you. Been this way for months. Maybe once a month BT/Wifi will turn on but only for a few hours maybe. Phone will reboot itself and come back up with the 2 broken again.
Click to expand...
Click to collapse
Unfortunatly that doesnt sound very good for me if you've been battling this wifi/BT problem for months.
synisterwolf said:
i would like you to do the following.
flash this http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
2 times. it will make sure we have a solid base to work on.
after that has ran 2 times. boot into the stock rom one time.
after that flash this https://dl.dropboxusercontent.com/u/12405441/new.global.firm.PH98IMG.zip
once this is done let it boot into the rom.
from here you should be good to flash any rom that is out there to date. (note please dont restore any system data, only app data)
ALSO MAKE SURE YOU HAVE 100% battery. doing an ruu can brick the phone if its interrupted.
report back when done
Click to expand...
Click to collapse
can you explain what you mean by flash the ruu twice once I have saved it to the root of my sd card? Does that just mean get to the bootloader, watch as it reads the the ph98img file and let it do that twice, or do I need to reboot in between, or do I need to put in a command?
fivedezs said:
can you explain what you mean by flash the ruu twice once I have saved it to the root of my sd card? Does that just mean get to the bootloader, watch as it reads the the ph98img file and let it do that twice, or do I need to reboot in between, or do I need to put in a command?
Click to expand...
Click to collapse
when you let hboot flash the zip, the first time is super short. it updates hboot, stock recovery, and splash i think. then it will reboot back to bootloader and ask to be flashed again. this time it will take some time to update because it does the whole system.
---------- Post added at 08:25 AM ---------- Previous post was at 08:24 AM ----------
tacoman said:
Well I finally booted into stock sense after flashing that boot.img which is a big step from before. For a brief moment, it saw wifi networks in my office but when I went to connect to one, wifi died and it no longer sees any wifi network. Bluetooth appears to still be an issue as well, i.e. will not turn on.
Click to expand...
Click to collapse
something doesnt seem right. the RUU would have flashed the boot.img for you. can you link me to the downloaded ruu that you have? also before you run the ruu did you do fastboot oem lock the bootloader?
Edit:
i remember an old trick from the inc days. after the RUU boot back into hboot and do a "factory reset" then boot into the phone. it use to fix the radio errors somewhere getting after a RUU. no clue why we did it. it just worked. try that when you are on stock recovery locked bootloader
Here is the RUU I have re downloaded. It was also the original I used in the past on my other Rezound
https://www.dropbox.com/s/1570h8l0ba1u7qp/rezound_AndroidPolice_4.03.605.2_PH98IMG.zip
I have also tried the RUU 3.14.605.12.exe and a couple other different RUU versions, but have the same issue with that as well. Even on MicroMod777's OTA-Global-Stock-4.05.605.14 710RD-Rooted 5/1/13 flashed through amon-ra, I get the bootloop. I have done these as locked and unlocked bootloader with no difference. I have also tried the factory reset with locked bootloader.... no go with that either.
I was only able to finally boot in to stock by fastboot flashing the boot.img, and that is where this phone sits now. My major issue at this point is I dont have wifi or bluetooth and have dug through numerous posts and tried different things, and nothing is working on it. What was strange as I said in my previous post, the very first time I was able to boot into stock sense by flashing the boot.img, it briefly saw wifi networks but disappeared and disabled as soon as I tried to connect to one. I have not been able to replicate that since then.
On a sidenote and possibly related, since this phone has been sitting at my desk I decided to try and flash Newt's NOS JB v1.0.0 ROM and it bootloops also at the droid eye screen. I never was able to get it going on this phone. My other rezound boots this just fine.
I think I have reached the limits of my android knowledge of what to try on this thing. I am satisfied with it not having wifi/bluetooth since my wife wont be using those features. I would like to understand what the heck is going on though.

[Q] (URGENT)PLEASE HELP I dun goofed with my Aria.

So yesterday I had my Aria in my pocket and I guess the power button got nudged and the screen turned on, lo and behold I pull my phone out of my pocket to find the lovely words written on the screen that too many pattern attempts have been attempted and that the device is locked. Only problem is I use this phone for everything but the phone function, I don't even have a sim in there. So with WiFi off, and no mobile network I was stuck for a bit. But then I finally sat down with it and luckily I had kept USB debugging on so I used adb to hack it. And that is where my urgent problem starts. After finally unlocking it I decided to might as well upgrade it, it was running 2.0.2 I believe Liberated ROM with CWM. So I started browsing around because I haven't really worked with this phone before all that much, I ended up reflashing to stock rom and then was going to use a nifty tool to get my hboot to 1.02, well it worked, the nifty tool flashed my hboot alright, along with my ROM and everything else there was. I am now stuck with a brick, the phone goes to the boot logo and then reboots... over and over and over until I pull the battery. I was charging the phone the whole time while working on it and after the tool was done flashing the hboot I unplugged the phone and a long list of errors ran down the screen of files that the OS was missing. I can get into fastboot, haven't had luck with any reflashs, adb is dud (while in recovery computer recognizes the adb connection but adb only lists the device as inactive. Ever since I lost my Inspire 4G this was my only working mobile device. If you have any tips tricks or clues as to how or if it is possible to come back from this destruction I am all ears.
Thank you in advance :fingers-crossed:
To clarify a bit further, the part that screwed me was the Upgrade HTC Gratia HBOOT for AlpharevX S-OFF tool. It was chugging along just fine up until the very end. The original sites listed for making a gold card are all dead but I managed to find a working one. Now I am trying to figure out what went wrong and why.
LIBERTY PVT SHIP S-ON
HBOOT-1.02.0000
MICROP-031b
TOUCH PANEL-STN21_03
RADIO-7.13.35.13
Nov 4 2010,23:12:58
The time and date are frozen
First you should S-OFF your phone with revolutionary. Then you need to flash a working recovery image and reflash ROM from there. Should work. If this still doesn't work, flash a modified hboot from the Development forum and see if you have any luck with that...
dansou901 said:
First you should S-OFF your phone with revolutionary. Then you need to flash a working recovery image and reflash ROM from there. Should work. If this still doesn't work, flash a modified hboot from the Development forum and see if you have any luck with that...
Click to expand...
Click to collapse
I cannot get revolutionary to find the device, the system version is 2.37.709.11 and I cannot do anything, if I try flashing anything the sig verification always fails.
(EDIT: Well I got lucky, found an asian RUU with same version, reflashed phone, S-Off, flashed unofficial CWM recovery and unofficial cyanogen 11.)
The problem I was having with revolutionary not recognizing the device was because my hboot version was too old (0.57). I used this AT&T Update package to get back to stock 2.2 and revolutionary worked straight away.
HTC_Aria_for_ATT_Android_2.2_ROM_Update.exe
http://www.mediafire.com/download/mch2657rdy8aqct/HTC_Aria_for_ATT_Android_2.2_ROM_Update.exe

Need Help Booting Verizon One Max

Hello everyone, been a while that I've messed with an HTC phone but here is the run down. I traded for this Verizon HTC One Max and it came with Candy5 rom installed. Everything was working fine until yesterday it randomly shut down and would not turn back on (none of the tricks with the hardware buttons worked). The Back and Home button were lit up so I decided to let it die. This morning I turned it back on but it would only boot loop with no chances of getting into TWRP. I tried ADB and nothing. After searching, I got my hands on a Verizon RUU and decided to use it. It detected the phone and it went through the process and gave me the "congrats" prompt. It rebooted on its own and got stuck in a boot loop at the HTC Logo screen. I still have access to the HBOOT screen. Here are my stats:
RELOCKED
T6WL PVT SHIP S-OFF RH
CID-VZW__001
HBOOT 2.49.0000
Radio -1.36.60.0520
OpenDSP v33.120.274_T6.0029
I tried a factory reset and that did not work either. I just want to go back to stock and get this thing back up. Any help? This is the RUU I used.:
0P3PIMG_T6_WL_K44_SENSE60_VZW_MR_VERIZON_WWE_3.09.605.2_HSM_Radio_1.36.60.0520_NV_VZW_4.60_002_release_385874_signed_1
I also used an Encrypted zip as well. I did notice that when I turn it off and then charge it, TWRP boots up but it glitches out with the battery charging animation. I tried to quickly press on some of the buttons like Wipe or Reboot but they don't work.
bor3d2damax said:
Hello everyone, been a while that I've messed with an HTC phone but here is the run down. I traded for this Verizon HTC One Max and it came with Candy5 rom installed. Everything was working fine until yesterday it randomly shut down and would not turn back on (none of the tricks with the hardware buttons worked). The Back and Home button were lit up so I decided to let it die. This morning I turned it back on but it would only boot loop with no chances of getting into TWRP. I tried ADB and nothing. After searching, I got my hands on a Verizon RUU and decided to use it. It detected the phone and it went through the process and gave me the "congrats" prompt. It rebooted on its own and got stuck in a boot loop at the HTC Logo screen. I still have access to the HBOOT screen. Here are my stats:
Unlocked
T6WL PVT SHIP S-OFF RH
CID-VZW__001
HBOOT 2.49.0000
Radio -1.36.60.0520
OpenDSP v33.120.274_T6.0029
I tried a factory reset and that did not work either. I just want to go back to stock and get this thing back up. Any help? This is the RUU I used.:
0P3PIMG_T6_WL_K44_SENSE60_VZW_MR_VERIZON_WWE_3.09.605.2_HSM_Radio_1.36.60.0520_NV_VZW_4.60_002_release_385874_signed_1
Click to expand...
Click to collapse
Right after running the RUU. Have you tried going to HBOOT and selecting Factory Reset?
Flyhalf205 said:
Right after running the RUU. Have you tried going to HBOOT and selecting Factory Reset?
Click to expand...
Click to collapse
Yes I have. It only reboots back into bootloop. I dont think it has recovery either
bor3d2damax said:
Yes I have. It only reboots back into bootloop. I dont think it has recovery either
Click to expand...
Click to collapse
You can always try this way but it's basically the same way as running the RUU... Look at the bottom at this page. http://www.verizonwireless.com/support/htc-one-max-update/
Flyhalf205 said:
You can always try this way but it's basically the same way as running the RUU... Look at the bottom at this page. http://www.verizonwireless.com/support/htc-one-max-update/
Click to expand...
Click to collapse
I just tried it and it came back saying there is no software for my phone. I used an Encrypted RUU.zip and then flashed a TWRP zip. Everything seems to be flashing perfectly but it just refuses to boot! I did notice that when I turn it off and then charge it, TWRP boots up but it glitches out with the battery charging animation. I tried to quickly press on some of the buttons like Wipe or Reboot but they don't work. Tried relocking it and now it says RELOCKED. This is going down hill.
Any update on this Bor? This seems exactly as what is happening tome just now....the battery with the TWRP glitch and all. I'm all ears to hear if you are up and running again....and hopefully without a complete re-flash as I haven't made a nandroid backup of my CM12.1 build!

HTC EVO 3D - Long Story - Trying to get back to GB with issues (Details in thread)

Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help

Categories

Resources