Hi, my screen on DX got broken last week and I was wondering if it is possible to replace digitizer only (without display). Is it as easy as in this video? I mean, do I have to disassembly it, or will heatgun be enough? Thanks.
w ww.youtube.com/watch?v=QQO7ZvSa5Lw (I can't post links yet, just remove that space )
P.S. - Question - will method in video work for Desire X as well?
Thanks
Related
Hi
Long story short, I bought on Ebay 2x 8525, one working perfectly, the second one not working (btw I knew it when I bought them...)
The working one has scratches on the screen, not the second one.
I would like to switch the screens.
Is there a manual on how-to-do so easilly?
Thanks
Michel
Either check Mike Channon's dismantling site or go on Youtube and type "8525 screen take apart." There's a full tutorial on how to do it. I would link you, but Youtube is blocked here. It's a very easy task, just don't strip your srews.
Thanks for the tip.
I have seen on Youtube one made by PdaPart.com
But if there was one available that I could print out, that would be awasome
Michel
Hi!
I have an almost same problem. If i buy a Hermes with a broken screen (not know exatcly what part is broken yet) then will i be able to change the screen with my wizard's? (hermes=mda vario2 wizard=mda vario) Please answer what if the lcd and/or the touch-digitalizer layer is broken.
Verymuch thanks
-Reeedim
To cut a long story short I might need to replace the lcd and/or digitiser on an x10 mini....
I only managed to find one tutorial on how to disassemble the handset and it seemed to advise against messing with the screen set up, I just wondered whether anyone had replaced the screen or knows where I can find some information on doing so??
Thanks.
Just bumping this thread, I need to replace the wifes digitizer.
Has anyone found a guide yet?
I've found a few for the mini pro but nothing for the mini.
Nobody??
http://www.ifixit.com/Teardown/Sony-Ericsson-Xperia-X10-Mini-E10i-Teardown/3124/1
hope it helps!
I have trawled the net for weeks on end. It appears no one is selling either the digitizer or lcd/digitizer combo for this unit. My unit's touch panel is cracked and I was hoping I could find a replacement and fix it myself. I can't even find a cheap Chinese knock-off. The closest thing available on the net is the LCD panel without the digitizer. My LCD is working fine.
If anybody has a dead Archos 101 with a good working LCD/Digitizer, I am willing to buy.
Anybody knows the technical specification for the LCD/digitizer? any part numbers? any substitutes that can work? I pulled mine apart but cannot identify any relevant manufacturer code/part numbers.
Thanks folks.
How much do you want to pay?
Sent from my A101IT using xda premium
@pitflyer, PMed you about this.
Anyone know where you can get a replacement screen/Digitizer?
Mine is smashed and parts aren't easy to find for it
If not whats the best way to wipe all personal info from it when screen and touch aren't working? If its going in the bin I'd like to wipe it first
Had the same problem with my A70... you can find the LCD easily, but It seems like it's impossible to get the touch Digitizer ...
perhaps...
fireblade893 said:
... whats the best way to wipe all personal info from it when screen and touch aren't working? If its going in the bin I'd like to wipe it first
Click to expand...
Click to collapse
1) Connect to computer and install new firmware ?
2) Break it open and remove the SD ?
3) Set it on fire ?
4) All of the above in that order !
ericmda said:
Anybody knows the technical specification for the LCD/digitizer? any part numbers? any substitutes that can work? I pulled mine apart but cannot identify any relevant manufacturer code/part numbers.
Thanks folks.
Click to expand...
Click to collapse
Archos 101 IT LCD Touch Screen seems to be a CHI MEI N101L6-L02
http://www.arctablet.com/blog/archos-tablet/inside-archos-101-internet-tablet/
fireblade893 said:
If not whats the best way to wipe all personal info from it when screen and touch aren't working? If its going in the bin I'd like to wipe it first
Click to expand...
Click to collapse
If the display itself is still working, but touchscreen is cracked you might enter recovery and wipe data partition and stuff.
Only power and vol+/vol- buttons are necessary.
arctablet said:
Archos 101 IT LCD Touch Screen seems to be a CHI MEI N101L6-L02
http://www.arctablet.com/blog/archos-tablet/inside-archos-101-internet-tablet/
Click to expand...
Click to collapse
I once did some research on the parts used for the A101 devices.
See this post:
http://forum.xda-developers.com/showpost.php?p=16452190&postcount=12
There's a datasheet collection ready for download.
- TFT-Display is Chimei N101L6-L02
- Touchscreen is probably made by Pixcir using a Touchplus TR16C0 controller
(http://www.pixcir.com.cn/english/index.asp)
Regards,
scholbert
hi , am looking for the touch screen digiitizer for thr archos it101 too, and wondring if u can show me where to get it , thnx
Hi guys, as you can see i am new here
I have htc one x+ and it has cracked screen. I think only touch screen is cracked and LCD is not damaged. I want to know if i am able to change only touch screen, because i heard that its difficult to separate LCD and touch from each other.
Also i want to know if i can change it by one x screen, as long as i am unable to find any screen for x+
I have AT&T version but at the top it says HTC not AT&T, so i cant really understand what to do as long as its a lot of options available on ebay. (Currently i am outside of USA so dont advice me to take the phone for repair, best opinion for me will be if i replace the screen by myself)
hey, hope this might help, i have a euro model(uk version) so i am unsure what screen you need ie frame+lcd+digitizer(it will be either sony or sharp)
does mean you would need to open you phone(voiding any warranty)
http://forum.xda-developers.com/showthread.php?t=2793341
The same problem
I have the same problem and I don't know where i can buy a new one digitizer.
I found this replacement on ebay http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=331071120495
Does anyone knows if this digitizer works in the AT&T version? What did you do OP?
Im not sure where to get the parts but I should warn you to be very careful when replacing it. Its much easier to replace the entire assembly. When you do, make sure to be gentle. When I finally set the screen back in I accidentally pinched the ribbon and the LCD didn't work. Its very fragile! VERY!
Edit: is the at&t screen for the x+ the same as the at&t x?
Sent from my HTC One X+ using XDA Free mobile app
Hi guyz,
I had a cracked screen on my HTC One X+ with a cracked screen
Two things that can help
1) The screen and the digitizer (both) is acutally a one piece hardware. So both have to be replaced.
2) The One X's screen is compatible with the X+'s screen (I've got the one x's screen now)
I'm in India so cant help with places to buy parts from.....but an online (ebay) search might help.
:good:
Hi guys,
My desire 630 back camera is somehow broken. I have called up HTC and they say that warranty doesn't cover physical damage.
Can somebody explain what my options are here to get it repaired or fixed for cheap ?
Can i use any other HTC phones back camera as a replacement for this?
I am not able to upload screenshot because of the 10 post limit but if anybody want to look i can send a pm.
adriansiv said:
Hi guys,
My desire 630 back camera is somehow broken. I have called up HTC and they say that warranty doesn't cover physical damage.
Can somebody explain what my options are here to get it repaired or fixed for cheap ?
Can i use any other HTC phones back camera as a replacement for this?
I am not able to upload screenshot because of the 10 post limit but if anybody want to look i can send a pm.
Click to expand...
Click to collapse
Not possible..to replace different camera..in HTC device you need original support camera
lens
its just the outer lens that got cracked .Not the inside camera.