i have updated my gs3 gt-i9300 from omega 44.1 to 46.1
at the begging i didnt make full wipe or cache or dalvik.. anyway the mobile couldnt operate after installing the rom !! it restarted on the the recovery mode (also it shows a small red vertical red line on the top-left of the screen before entering the recovery mode) ..
i wiped the full wipe cache and dalvik.. then install the rom again... still the same issue.... can anybody help ?
yes, do a full wipe factory reset from recovery and re-flash.
luaymaani said:
i have updated my gs3 gt-i9300 from omega 44.1 to 46.1
at the begging i didnt make full wipe or cache or dalvik.. anyway the mobile couldnt operate after installing the rom !! it restarted on the the recovery mode (also it shows a small red vertical red line on the top-left of the screen before entering the recovery mode) ..
i wiped the full wipe cache and dalvik.. then install the rom again... still the same issue.... can anybody help ?
Click to expand...
Click to collapse
Ask in the rom thread
Related
Hi everyone,
I've installed ICS domination theme on my SGS2 with litening rom 6.1 installed on it.
After the installation, i've got a boot loop with a strange pop up which is
" Select an action
----------------------------------------------
Select an application for the USB device."
So I've wiped user data from the CWM recovery and I tried to install back my insecure rom (litening rom) with odin and also the original one.
The phone reboot well but i still get the pop up and i can't do anything ...
Is there a way to format and start from scratch or a another solution to remove this pop up ?
PS: i don't mind losing all my data.
PS2: sorry for the picture's bad quality (i took from my webcam ...)
ippo.san said:
Hi everyone,
I've installed ICS domination theme on my SGS2 with litening rom 6.1 installed on it.
After the installation, i've got a boot loop with a strange pop up which is
" Select an action
----------------------------------------------
Select an application for the USB device."
So I've wiped user data from the CWM recovery and I tried to install back my insecure rom (litening rom) with odin and also the original one.
The phone reboot well but i still get the pop up and i can't do anything ...
Is there a way to format and start from scratch or a another solution to remove this pop up ?
PS: i don't mind losing all my data.
PS2: sorry for the picture's bad quality (i took from my webcam ...)
Click to expand...
Click to collapse
U said u wiped the user data from CWM but don't wanna lose data??!
Go to CWM>
Mount and storage>format system
And also format cache
Then reflash rom
CHEERS ;-)
Sent from my Galaxy S2 - I9100 with SlimRom!
Hannibal226 said:
U said u wiped the user data from CWM but don't wanna lose data??!
Go to CWM>
Mount and storage>format system
And also format cache
Then reflash rom
CHEERS ;-)
Sent from my Galaxy S2 - I9100 with SlimRom!
Click to expand...
Click to collapse
Thanks for the quick reply !
I said i don't mind (or care) about losing data.
I don't have the mount storage and any format system (otherwise i would have already tried it ) on CWM ... I only get :
-reboot system
-apply update from sdcard
-wipe data/factory reset
-wipe cache partition
My android system recovery is 3e version
ippo.san said:
Thanks for the quick reply !
I said i don't mind (or care) about losing data.
I don't have the mount storage and any format system (otherwise i would have already tried it ) on CWM ... I only get :
-reboot system
-apply update from sdcard
-wipe data/factory reset
-wipe cache partition
My android system recovery is 3e version
Click to expand...
Click to collapse
YOU have no CWM recovery .
Did you follow the do not posts etc boot loop instructions post 1 Q&A
Flash a root and CWM kernel .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
jje
Thanks for the link.
I have succeeded into formating my system then reflash the original rom but now it is stuck at the first black screen with the "samsung galaxy s2" written on it.
So i format system again, format data, cache and reflash the rom ... same thing happened
ippo.san said:
Thanks for the link.
I have succeeded into formating my system then reflash the original rom but now it is stuck at the first black screen with the "samsung galaxy s2" written on it.
So i format system again, format data, cache and reflash the rom ... same thing happened
Click to expand...
Click to collapse
If you're experiencing a bootloop
http://forum.xda-developers.com/showthread.php?t=1108499
Other wise check that you've flashed everything properly
it's not a boot loop as my phone doesn't even boot ...
ippo.san said:
it's not a boot loop as my phone doesn't even boot ...
Click to expand...
Click to collapse
yeah sorry about that realised later.
Try wiping from CWM or flashing official stock firmware all over again
I have fixed my problem.
It was soft bricked so I have follow one thread: http://forum.xda-developers.com/showthread.php?t=1457458
Anyway, thanks everyone for answering me !
Hello guys,
Just got my new I9100 yesterday.
Phone Specs:
PDA: I9100XWKL1
Phone : I9100DDKL1
CSC: I9100DDKL1
I flashed CF Root I9100XWKL1 and rooted my phone. Later I downloaded official MIUI and flashed it via CWM Recovery. Wiped cache and Dalvik cache. Now the phone is stuck at MI logo. I just hear the galaxy sII startup tone and the phone shows logo and does not moves ahead. What to do now guys? Have I went somewhere wrong?? Guide me
Try reflashing the rom without any wipe.
Or boot into recovery if you can & do a wipe/factory reset.
m2smoe said:
Try reflashing the rom without any wipe.
Click to expand...
Click to collapse
I tried reflashing still stuck at logo.
MistahBungle said:
Or boot into recovery if you can & do a wipe/factory reset.
Click to expand...
Click to collapse
Done. Booted now after factory reset Thanks
As strange as this may sound, I usually wipe cache and dalvik before flashing the ROM...I had similar issues with CM7 when I wiped cache and dalvik after install. Enter recovery again, wipe cache and dalvik and flash ZIP, then reboot and see...
Otherwise, the only other possible explaination is that the first bootup does take some time...but usually never pauses or stops the animation.
0semaj0 said:
As strange as this may sound, I usually wipe cache and dalvik before flashing the ROM...I had similar issues with CM7 when I wiped cache and dalvik after install. Enter recovery again, wipe cache and dalvik and flash ZIP, then reboot and see...
Otherwise, the only other possible explaination is that the first bootup does take some time...but usually never pauses or stops the animation.
Click to expand...
Click to collapse
Hmmm that's not very strange. Also I was considering that first boot will take time as dalvik cache is prepared and then system gets running. But the wait time was abnormal in first case.
Sent from my GT-I9100 using Tapatalk
Hi guys,
I just flashed criskelo rom to my phone, but I tried to do a hard reset using the code (*2767....) and now my phone is stuck on the boot screen (SAMSUNG). I've waited a long time already, left it over night and nothing.
Also I tried to recover the back up I made with CWM, but I'm again stuck on boot screen...
Any ideas on what I can do??
Thanks
go to recovery, do a data reset and wipe cache..hope this helps..worked for me a few times.
ahmedmaaiee said:
go to recovery, do a data reset and wipe cache..hope this helps..worked for me a few times.
Click to expand...
Click to collapse
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Ryudo0 said:
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Click to expand...
Click to collapse
have you tried flashing to the stock rom using Odin?
Ryudo0 said:
Already tried data/factory reset, wipe cache partition and wip Dalvik Cache. Still not working :crying:
Click to expand...
Click to collapse
Try either flashing a stock firmware through Odin, or go into recovery and format /system in addition to wiping data, cache and Dalvik, and install the ROM zip again.
Arachnid92 said:
Try either flashing a stock firmware through Odin, or go into recovery and format /system in addition to wiping data, cache and Dalvik, and install the ROM zip again.
Click to expand...
Click to collapse
OMG THX...
I just flashed a stock firmware through ODIN and it's ALIVE!! Thanks...
(before i flashed on ODIN I restarted my laptop and it was stuck on BOOT... its like a curse omg... i had to go to safe mode to make it work again...)
Its all working now thanks
EDIT: Well... i rooted the phone again, flashed the rom, but this time I tried to make the wipe cache and factory reset through the CWM (volup+home+power), but I got stuck on boot screen again.... Guess I'll have to stay with the rom but without wiping it
Ryudo0 said:
OMG THX...
I just flashed a stock firmware through ODIN and it's ALIVE!! Thanks...
(before i flashed on ODIN I restarted my laptop and it was stuck on BOOT... its like a curse omg... i had to go to safe mode to make it work again...)
Its all working now thanks
EDIT: Well... i rooted the phone again, flashed the rom, but this time I tried to make the wipe cache and factory reset through the CWM (volup+home+power), but I got stuck on boot screen again.... Guess I'll have to stay with the rom but without wiping it
Click to expand...
Click to collapse
If I remember correctly, Criskelo ROM does not require you to wipe anything if you're coming from a stock ROM (it does everything through the install script). So just install it and live happily ever after
getting stuck on the boot screen is normal...i did twice already while flashing new rooms...usualy for forgeting to wipe. reflashing the stock rom always works.
First of all.. hello
Today I installed the dpichanger app from google store. I changed the the dpi and it asked for a restart. After restart its stuck at the yellow triangle. At first I did the following:
Wipe data/Factory reset
Wipe batt stats
Wipe dalvik cache
No luck what so ever. Then I thought I bricked it and decided to install RootBox JB on the device. I did a format system and all the above steps. Status 7 again.
What ca I do?
I was running the stock leaked ICS I9100_CODE_I9100XXLQ5_CL753921_REV02_user_low_ship (GT-I9100-MULTI-CSC-OXALQ5.tar and MODEM_I9100XXLQ5_REV_02_CL1165929.tar too).
CWM is 5.5.0.4. What should I do?
I can't reinstall the images though Odin.... how should I proceed to get my phone back functioning? Is my device bricked....?
adi003 said:
First of all.. hello
Today I installed the dpichanger app from google store. I changed the the dpi and it asked for a restart. After restart its stuck at the yellow triangle. At first I did the following:
Wipe data/Factory reset
Wipe batt stats
Wipe dalvik cache
No luck what so ever. Then I thought I bricked it and decided to install RootBox JB on the device. I did a format system and all the above steps. Status 7 again.
What ca I do?
I was running the stock leaked ICS I9100_CODE_I9100XXLQ5_CL753921_REV02_user_low_ship (GT-I9100-MULTI-CSC-OXALQ5.tar and MODEM_I9100XXLQ5_REV_02_CL1165929.tar too).
CWM is 5.5.0.4. What should I do?
I can't reinstall the images though Odin.... how should I proceed to get my phone back functioning? Is my device bricked....?
Click to expand...
Click to collapse
Can you not boot into download mode or CWM at all?
ChrisRHolstein said:
Can you not boot into download mode or CWM at all?
Click to expand...
Click to collapse
yes i can
Try another ZIP
Help ! I Flashed CM12 and it worked good , but after some days i wanted to go back to stock ROM (KitKat 4.4.2) i tried to flash it with Odin3 everything went well .. i wiped data/factory reset , wiped Cache partition , wiped dalvik cache but im still stuck at Samsung logo Help Me pleasee
Bassel Atef said:
Help ! I Flashed CM12 and it worked good , but after some days i wanted to go back to stock ROM (KitKat 4.4.2) i tried to flash it with Odin3 everything went well .. i wiped data/factory reset , wiped Cache partition , wiped dalvik cache but im still stuck at Samsung logo Help Me pleasee
Click to expand...
Click to collapse
don't flash odin stock package over custom rom directly. do wip data/factory reset before flashing odin rom. the first boot will take several minutes so be patient.
don't forget to use last odin version 3.09 or 3.10
I Did and i formated my internal storge before using Odin3 and wiped data / factory reset and wiped Cache Partition and Dalvik Cache before and after using Odin3 but still stuck at Samsung logo help me please
Bassel Atef said:
I Did and i formated my internal storge before using Odin3 and wiped data / factory reset and wiped Cache Partition and Dalvik Cache before and after using Odin3 but still stuck at Samsung logo help me please
Click to expand...
Click to collapse
are you sur that you flash the correct firmeware. i think there is several galaxy s3 neo models. so cheek if it is correct firmeware. or just maybe your firmeware that you flash is damaged.
also you can cheek " nand erase all " option in odin . after flash is complette go to recovery and wip cache an factory reset (compulsory).