Related
Attention, Do On Your Own Risk
I am not responsible if there is any damage to your device
And read this carefully
ONLY FOR LG L7 II P713
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Let's get started it
First, check your software, go to settings> about phone> software information
If you are already using firmware p71310e-ESA-XX
You can directly use the apk below to rooting process
download apk from here
- install apk
- open it, and select the Superuser or SuperSU(Recomended use this)
- Click Gandalf
- Reboot
You have succesfully rooted your device
For non p7130e-ESA-XX user
Follow these instruction
>First, Download all these
1. USB Driver
2. KDZ FW Updater
3. Download Firmware LG L7 with Root support from here
4. Choose THA/THAILAND V10E LGP713
5. Download apk from here
Second, install
1. Usb Driver
2. Extract the KDZ FW Updater, find msxml.msi and instali it
3. Connect the device computer, do not forget to check the USB debugging on, once there select the connection notification, select Software LG
4. Open KDZ update
Choose Type =3GQCT
Phone Mode =DIAG
5.Browse File KDZ that you've download, then click ''Launch Software Update"
6. Find some food until the process is done,
cause It's take a long time, between 15-20 minutes, i'm not kidding
7. Install apk
8. Open it, and select the Superuser or SuperSU(Recomended use this)
9. Click/Choose Gandalf
10. Reboot your device
Finally, You have succesfully rooted your device
Special thanks
@alephzain
for this awesome application
Of course, all of these operations need the right Root User
1. Download and unpack this archive boothack+recovery
2. Install the program Gscript.apk on your phone
3. File boothack-cwm.sh put the path /storage/sdcard0/gscript /
4. APPSSBL.bin and recovery.img files put the path /storage/external_SD/
5. Run a previously installed Gscript
6. Press the softkey menu -> Add Script -> Load File -> boothack-cwm.sh -> save (it is added to the list)
7. Click on the saved script boothack-cwm
8. You're done! (the phone will restart in recovery mode)
Known issues at the moment:
1. The problem with the display. Displayed upside down and while navigating jumps in width. At this point in the stage of searching for a solution. Nevertheless, all necessary functions are performed
Solution for bootloop problem while using CWM
solution is: pull out the battery > plug in to USB or charger if you don't have pc > just let it blinks with LG logo > now put your battery in, you will see the battery icon charged > plug out the cable > then turn it on like usual.... wallaa... you got your phone back to home...
after this, please use kdz flasher to remove cwm recovery ( do not wipe data if you won't )
that's all... cheers
credit goes to
thanks @yayakuya for the solution
Reserved
I want to ask something. Will framaroot 1.7.0 work on 10D ? If not, why not using motochoper instead ?
Sent from my LG-P713 using xda app-developers app
thank ,i was rooted for my p713 .
but i can't install recovery .
karkand said:
I want to ask something. Will framaroot 1.7.0 work on 10D ? If not, why not using motochoper instead ?
Sent from my LG-P713 using xda app-developers app
Click to expand...
Click to collapse
nope, 10d didn't working with all framaroot version, you must change you fw
vananuan said:
thank ,i was rooted for my p713 .
but i can't install recovery .
Click to expand...
Click to collapse
open this thread to install cwm
http://forum.xda-developers.com/showthread.php?t=2277972&page=2
follow the instructions
please note this
the recovery doesn't stable yet, don't blame anyone if there's something wrong later
vananuan said:
thank ,i was rooted for my p713 .
but i can't install recovery .
Click to expand...
Click to collapse
Thx. Now my phone root
Sent from my LG-P713 using xda app-developers app
damn... my p713 was v10a
i hate to play with flasher...
but nvm, thanks for those bro,
can't do oplosan shake before breaking the system
yayakuya said:
damn... my p713 was v10a
i hate to play with flasher...
but nvm, thanks for those bro,
can't do oplosan shake before breaking the system
Click to expand...
Click to collapse
you're welcome brother
just shaking the oplosan dance at the same time while you breaking the system
happy dancing and happy flashing
nasheich said:
you're welcome brother
just shaking the oplosan dance at the same time while you breaking the system
happy dancing and happy flashing
Click to expand...
Click to collapse
oi bro...
why after I pull my sdcard out, my phone just going to bootloop...
I still can go to cwm, but why that's only for few seconds then it just reboot it self???
I can't do restore the backup coz it will be rebooted while in the middle of process...
the worst thing, I can't use kdz flasher coz adb can not read my phone while in bootlooping (actually it's readable, but the bootloop is not stucked... it's round over n over again)
so adb just read for a while coz phone turned off n then restarted again...
did you know which buttons combo for bring it to emergency mode?
thanks
yayakuya said:
oi bro...
why after I pull my sdcard out, my phone just going to bootloop...
I still can go to cwm, but why that's only for few seconds then it just reboot it self???
I can't do restore the backup coz it will be rebooted while in the middle of process...
the worst thing, I can't use kdz flasher coz adb can not read my phone while in bootlooping (actually it's readable, but the bootloop is not stucked... it's round over n over again)
so adb just read for a while coz phone turned off n then restarted again...
did you know which buttons combo for bring it to emergency mode?
thanks
Click to expand...
Click to collapse
1. don't use cwm for now, isn't stable yet
2. like Samsung's device, use combination of home+volume down+power to go emergency mode
3. if the number 2 doesn't work, pull out the battery, connect your device to PC(don't use the battery) and go to emergency mode by holding home+volume down+power as fast as you can
4. now flash the stock rom using kdz updater again(make sure you downloaded that)
sorry for late reply, I'm busy dancing oplosan
nasheich said:
1. don't use cwm for now, isn't stable yet
2. like Samsung's device, use combination of home+volume down+power to go emergency mode
3. if the number 2 doesn't work, pull out the battery, connect your device to PC(don't use the battery) and go to emergency mode by holding home+volume down+power as fast as you can
4. now flash the stock rom using kdz updater again(make sure you downloaded that)
sorry for late reply, I'm busy dancing oplosan
Click to expand...
Click to collapse
thanks mate..
ok, now i'll try it then report to you soon...
___edit__
kdz won't read the emergency mode!
I was trying those three modes in kdz, but phone can't read it.... :$
yayakuya said:
thanks mate..
ok, now i'll try it then report to you soon...
Click to expand...
Click to collapse
you're welcome
yayakuya said:
thanks mate..
ok, now i'll try it then report to you soon...
___edit__
kdz won't read the emergency mode!
I was trying those three modes in kdz, but phone can't read it.... :$
Click to expand...
Click to collapse
make sure you have install the driver first
use driver from the op
nasheich said:
you're welcome
Click to expand...
Click to collapse
how to read the phone in emergency mode?
the LG United driver only read adb....
any suggestion?
yayakuya said:
how to read the phone in emergency mode?
the LG United driver only read adb....
any suggestion?
Click to expand...
Click to collapse
like in the op, just change the "Phone Mode" to "Emergency Mode" at the KDZ Updater
Second, install
1. Usb Driver
2. Extract the KDZ FW Updater, find msxml.msi and
instali it
3. Connect the device computer,
4. Open KDZ update
Choose Type =3GQCT
Phone Mode =DIAG > change to emergency mode
5.Browse File KDZ that you've download, then click
''Launch Software Update"
6. Find some food until the process is done,
nasheich said:
like in the op, just change the "Phone Mode" to "Emergency Mode" at the KDZ Updater
Second, install
1. Usb Driver
2. Extract the KDZ FW Updater, find msxml.msi and
instali it
3. Connect the device computer,
4. Open KDZ update
Choose Type =3GQCT
Phone Mode =DIAG > change to emergency mode
5.Browse File KDZ that you've download, then click
''Launch Software Update"
6. Find some food until the process is done,
Click to expand...
Click to collapse
like I was mentioned above, I did try those three mode "emergency n cs_emergency mode" but still phone not found...
but nevermind, I've got new solution for it by my self....
if you guys having problem after installing cwm n do normal reboot, it will never bring you to the home screen... it's just bootloop...
solution is: pull out the battery > plug in to USB or charger if you don't have pc > just let it blinks with LG logo > now put your battery in, you will see the battery icon charged > plug out the cable > then turn it on like usual.... wallaa... you got your phone back to home...
after this, please use kdz flasher to remove cwm recovery ( do not wipe data if you won't )
that's all... cheers
I'm not using LG L7 anymore, i was changing about 2 months ago
btw, I'll put it at first page if you don't mind
First of all, This is not entirly my original work. credits goes to quangnhut123 , who modified LG Flash tool for us. I am just sharing this GUIDE for flashing lolipop to L90
Quote:
I have tested this method myself and it is working perfectly for me, but it is also possible that it might not work for you for some reasons, so don't panic, just post your problem or whatever error you are facing (please attach screenshot if possible). I or other thread members will try to troubleshoot it. After resolving the problem I'll update this post, so that other members do not face such problem again.
Quote:
PLEASE, USE THIS TUTORIAL AT YOUR OWN RISK, IF SOMETHING WENT WRONG (because of your stupidity) ME OR XDA WILL NOT RESPONSIBLE FOR YOUR LOSS.
Flashing KDZ file removes Root and CWM, so you will need to root again.
Flashing KDZ file does not wipe your data, but if you get bootloops you need to hard-reset it, so please backup data first.
Note -
EVERYTHING IN THIS ROM IS WORKING Even the Knock Code , Camera ,DOuble Tap, ANd Everything Your DEvice Is Capable Of.
If Due To Some Reason Your Device Slows Down After The Update Please Do A Factory Reset Of the Device It Will Work Fine Again With Lolipop. :good:
1. Download KDZ file
To download KDZ File Of Lolipop for you Device GOTO
https://yadi.sk/d/PRPkYggqf4v4C For lolipop 5.0.2
https://yadi.sk/d/2OoNsU3wf5vku For lolipop 5.0.0
2. Precautions:-
Enable Show Hidden Files in Folder Option (Don't disable this option until kdz flashing process completes) and Delete the LG Mobile Tool folder (if exist) from
C:\ProgramData\
Remove all other USB devices (external HDD, backup drives, other phones, etc.) and cables connected to PC to avoid issued due to voltage loss.
OFFLINE KDZ FLASHING DOES NOT LOOSE PHONE DATA, BUT YOU MUST BACKUP YOUR PHONE IN ANY CASE.
3. Downloads:-
Download The Zip File From Here- http://www.mediafire.com/download/s2qqa3p464pbxp7/LG_Flash_Tool_2014.zip
4. Install LG Drivers (internet required for this):
Extract B2CAppSetup.zip anywhere on PC and Run B2CAppSetup.exe as administrator. Accept Agreement and a window will appear. Click on OK button (Bottom Right) on instructions. Now connect your LG Device to PC in LG Software mode. B2CAppSetup tool will detect it. Now Click on Install USB Drivers (2nd option on Top Left). It will automatically download and install drivers for your device. If Install USB Drivers options goes grey (Disable) after detecting phone, it means latest USB Drivers are already installed.
After installing USB Drivers please REBOOT YOU PC
Now Connect Phone in Software Upgrade Mode: Switch OFF the phone and Press VolumeUP button and insert USB cable into the phone, Now phone should show Firmware Upgrade Mode.
Let windows load any drivers, wait until it finishes. TWO ENTRIES SHOULD APPEAR IN DEVICE MANAGER IF DRIVERS ARE PROPERLY INSTALLED
Download File From Here- http://www.mediafire.com/download/3ir140wxq9mxa31/B2CAppSetup.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After installing device drivers unplug the phone from PC
5. Starting The Installation Process:
Extract LG Flash Tool 2014.zip to A Folder
Note-
Copy The KDZ file to the same folder where all the files of lg Flash Tool 2014 is extracted- [For Better Results]
Open LG Flash Tool 2014 folder and run LGFlashTool2014.exe and administrator.
LG Flash Tool 2014 windows will appear.
Select "3GQCT" in Type of Flash.
Select "EMERGENCY" for PhoneMode.
Select your KDZ file in the Select KDZ File box.
Press "Normal Flash" button. (as pic below)
IMPORTANT: Do not change the names of the KDZ files. (They should look like.... "D41020B_00.kdz" )
Now Again Connect Phone in Software Upgrade Mode: Switch OFF the phone and Press VolumeUP button and insert USB cable into the phone, Now phone should show Firmware Upgrade Mode.
Now "Read Phone Information" box will open with blank information, Just press "Start"
Now "Select country and language" small box will open. Here select "Different Country" and "English" and press "OK"
The utility starts the official LG Mobile Support Tool
Now actual flashing will start, and if your KDZ file is good flashing will end without any issue.
JUST RELAX!! SIT BACK WITH HANDS FOLDED BEHIND HEAD AND WATCH IT HAPPENING.
When it finishes full flashing and phone will start rebooting.
YOU CAN REMOVE CABLE AFTER 100%, AND FLASHING IS FINISHED!!! Close all programs.
DON'T FORGET TO HIT THANKS IF IT HELPED...
.
Lets See It May or May Not Work
Martin213 said:
Nice tut thank you,can this build run on D405n?
Click to expand...
Click to collapse
Well I have Never Tested This On ANy Another Device Except For LG L90 D410
If you want to try this on your Lg L90 D405n i recommend to get a kdz file for your model as a backup
To download KZD for you Device GOTO lg-firmware-rom.com
Enter IMEI no of your device.
TO GET THE IMEI OF YOUR PHONE go to About Phone in settings and get your imei no or else remove the battery and see there it will be written.
Do Post If This Worked On Your Device
Best Of Luck With The Trial :good: :good:
my phone is lg l90 d410(v10d-IND-xx),can i flash using kdz flasher??
will there be any kind of problems???
Will a message box pops up when restart the phone: "this version is not for users"
Other languages
in the window "select country and language" is only available English? happens to have Portuguese?
Perfect
is working perfectly on my L90 d410nh......Thanks
Ya there might be a mag in some of the devices but that is due to network nothing is related to the rom and there will not be anybkind of problem due to it.
Sent from my LG-D410 using XDA Free mobile app
Xzyrate there is only english language option in this rom no other language is present
Wellbi am glad that i could help
Sent from my LG-D410 using XDA Free mobile app
Other languages
OsFreakxx said:
Xzyrate there is only english language option in this rom no other language is present
Wellbi am glad that i could help
Sent from my LG-D410 using XDA Free mobile app
Click to expand...
Click to collapse
Worked in portuguese!
Would this kdz work in 405n variant? Or at least with phew bugs?
I dont think that you should try this its a totally different varient as it has different hardware configuration
Sent from my LG-D410 using XDA Free mobile app
OsFreakxx said:
First of all, This is not entirly my original work. credits goes to quangnhut123 , who modified LG Flash tool for us. I am just sharing this GUIDE for flashing lolipop to L90
Quote:
I have tested this method myself and it is working perfectly for me, but it is also possible that it might not work for you for some reasons, so don't panic, just post your problem or whatever error you are facing (please attach screenshot if possible). I or other thread members will try to troubleshoot it. After resolving the problem I'll update this post, so that other members do not face such problem again.
Quote:
PLEASE, USE THIS TUTORIAL AT YOUR OWN RISK, IF SOMETHING WENT WRONG (because of your stupidity) ME OR XDA WILL NOT RESPONSIBLE FOR YOUR LOSS.
Flashing KDZ file removes Root and CWM, so you will need to root again.
Flashing KDZ file does not wipe your data, but if you get bootloops you need to hard-reset it, so please backup data first.
Note -
EVERYTHING IN THIS ROM IS WORKING Even the Knock Code , Camera ,DOuble Tap, ANd Everything Your DEvice Is Capable Of.
If Due To Some Reason Your Device Slows Down After The Update Please Do A Factory Reset Of the Device It Will Work Fine Again With Lolipop. :good:
1. Download KDZ file
To download KDZ File Of Lolipop for you Device GOTO
https://yadi.sk/d/PRPkYggqf4v4C For lolipop 5.0.2
https://yadi.sk/d/2OoNsU3wf5vku For lolipop 5.0.0
2. Precautions:-
Enable Show Hidden Files in Folder Option (Don't disable this option until kdz flashing process completes) and Delete the LG Mobile Tool folder (if exist) from
C:\ProgramData\
Remove all other USB devices (external HDD, backup drives, other phones, etc.) and cables connected to PC to avoid issued due to voltage loss.
OFFLINE KDZ FLASHING DOES NOT LOOSE PHONE DATA, BUT YOU MUST BACKUP YOUR PHONE IN ANY CASE.
3. Downloads:-
Download The Zip File From Here- http://www.mediafire.com/download/s2qqa3p464pbxp7/LG_Flash_Tool_2014.zip
4. Install LG Drivers (internet required for this):
Extract B2CAppSetup.zip anywhere on PC and Run B2CAppSetup.exe as administrator. Accept Agreement and a window will appear. Click on OK button (Bottom Right) on instructions. Now connect your LG Device to PC in LG Software mode. B2CAppSetup tool will detect it. Now Click on Install USB Drivers (2nd option on Top Left). It will automatically download and install drivers for your device. If Install USB Drivers options goes grey (Disable) after detecting phone, it means latest USB Drivers are already installed.
After installing USB Drivers please REBOOT YOU PC
Now Connect Phone in Software Upgrade Mode: Switch OFF the phone and Press VolumeUP button and insert USB cable into the phone, Now phone should show Firmware Upgrade Mode.
Let windows load any drivers, wait until it finishes. TWO ENTRIES SHOULD APPEAR IN DEVICE MANAGER IF DRIVERS ARE PROPERLY INSTALLED
Download File From Here- http://www.mediafire.com/download/3ir140wxq9mxa31/B2CAppSetup.zip
After installing device drivers unplug the phone from PC
5. Starting The Installation Process:
Extract LG Flash Tool 2014.zip to A Folder
Note-
Copy The KDZ file to the same folder where all the files of lg Flash Tool 2014 is extracted- [For Better Results]
Open LG Flash Tool 2014 folder and run LGFlashTool2014.exe and administrator.
LG Flash Tool 2014 windows will appear.
Select "3GQCT" in Type of Flash.
Select "EMERGENCY" for PhoneMode.
Select your KDZ file in the Select KDZ File box.
Press "Normal Flash" button. (as pic below)
IMPORTANT: Do not change the names of the KDZ files. (They should look like.... "D41020B_00.kdz" )
Now Again Connect Phone in Software Upgrade Mode: Switch OFF the phone and Press VolumeUP button and insert USB cable into the phone, Now phone should show Firmware Upgrade Mode.
Now "Read Phone Information" box will open with blank information, Just press "Start"
Now "Select country and language" small box will open. Here select "Different Country" and "English" and press "OK"
The utility starts the official LG Mobile Support Tool
Now actual flashing will start, and if your KDZ file is good flashing will end without any issue.
JUST RELAX!! SIT BACK WITH HANDS FOLDED BEHIND HEAD AND WATCH IT HAPPENING.
When it finishes full flashing and phone will start rebooting.
YOU CAN REMOVE CABLE AFTER 100%, AND FLASHING IS FINISHED!!! Close all programs.
DON'T FORGET TO HIT THANKS IF IT HELPED...
Click to expand...
Click to collapse
Im Try to flash but 47% done then software hang n stop
error at startup after phone finished booting up
Hi,
My LG L90 D410 phone started giving the below error at startup after I upgraded to Lollipop 5.0.2. Though everything works fine. please advice.
Thank you
Software Update...
hello...
My d410 got stuck at 54% when it was updating and ever since have been trying do it again but it will still stop at 54%... what can i do to revert it and i have tried factory resetting it but it still not working.... what can i do pls help....
dedoyin said:
hello...
My d410 got stuck at 54% when it was updating and ever since have been trying do it again but it will still stop at 54%... what can i do to revert it and i have tried factory resetting it but it still not working.... what can i do pls help....
Click to expand...
Click to collapse
Are u still facing the issue sorry for late reply i was busy with work
I don't think so those are two completely different variants
HELLO FRIENDS...
Many friend have face this problems i.e no recovery,no splash screen,no system only just a small vibration this is know as Hard-Brick..
This method will 100% works for both Lenovo a6000 and plus...
for this we need the following things....
Firmware-File
QPST Tool
and well working computer or Laptop..
Thing want to know before starting...
We will not use QPST tool for flashing this is optional. After installing QPST tool the error face by most computer will be fixed error like MSVCP100.dll error mostly this problem is face by 64bit OS..If you have installed 64bit try it if it's works then good if not then use your friend's PC which have 32bit OS or install 32bit OS
We will use flash tool which already given in Firmware zip.
Let's Start...:laugh:
After downloading the firmware You'll get firmware folder and Qualcomm Flash Tool and most important drivers folder there will be more files but no use of those file.
STEP 1.First extract this above 3 file in a folder where you want...then click on driver folder and then click on Qualcomm_USB_Driver_Setup.exe......setup will start...select the first option(WWWAN.DHCP........) and then next...further you can do.. while installation if a pop-up comes click on yes(all ways click on yes) after completion of driver installation please reboot or restart you are pc or laptop ..:good:
STEP 2...click on Qualcomm Flash Tool->QcomDLoader.exe if it start then good....and if there is an error like MSVCP100.dll not found or something else
then install QPST tool and run it. After opening it now close it.....Now again click on QcomDLoader.exe this time it will work:good:
then click on Load button(the first icon of the tool) then browse the firmware folder where u have extracted...then click on start(the 3 icon of the flash tool)
STEP 3:..Now remove Your sim card and memory card(if u don't have this then also remove your battery and then put it again)...
Now hold volume+ and volume - button(do not touch power button) and plug in vie usb... the flash will automatically start....
wait till it complete...after finish it will show finish in green color...then unplug the phone and hold power button to start...
This method is same for Lenovo a6000 plus the only different will be....it will show 1GB ram and 8GB internal storage
To fix this install any custom rom..,:good:
This method is tasted by me and it work for me I have Lenovo a6000 plus that's why I am sharing this with you all....
NOTE:-after coming back to KitKat you may face the problem of boot loop for 7.x.x rom or some feature of the rom may not work..to overcome this problem follow this
download this twrp KitKat version(not so important) you can use cwm(not tested) and direct flash the lollipop rom which contain system.img file in it eg. vibe 2.5(tested and works) ,color os 3.1 or any rom which contain system.img and reboot.:good:
do not use any pach file for upgrading to lollipop do direct flash lollipop rom.
I hope this will also work for you...
if this post help's you plz donate me on paytm...no 9763697739
if any problem occurs then please let me know..
Screen Short
This is my phone info after flashing it.....
this is not Lenovo a6000 this SS in of Lenovo a6000 plus
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This after flashing custom Rom
soan0 said:
HELLO FRIENDS...
Many friend have face this problems i.e no recovery,no splash screen,no system only just a small vibration this is know as Hard-Brick..
This method will 100% works for both Lenovo a6000 and plus...
for this we need the following things....
Firmware-File(this is stock rom is for Lenovo a6000 but can be use for Lenovo a6000+)
QPST Tool
and well working computer or Laptop..
Thing want to know before starting...
We will not use QPST tool for flashing this is optional. After installing QPST tool the error face by most computer will be fixed error like MSVCP100.dll error mostly this problem is face by 64bit OS..If you have installed 64bit try it if it's works then good if not then use your friend's PC which have 32bit OS or install 32bit OS
We will use flash tool which already given in Firmware zip.
Let's Start...:laugh:
After downloading the firmware You'll get firmware folder and Qualcomm Flash Tool and most important drivers folder there will be more files but no use of those file.
STEP 1.First extract this above 3 file in a folder where you want...then click on driver folder and then click on Qualcomm_USB_Driver_Setup.exe......setup will start...select the first option(WWWAN.DHCP........) and then next...further you can do.. while installation if a pop-up comes click on yes(all ways click on yes) after completion of driver installation please reboot or restart you are pc or laptop ..:good:
STEP 2...click on Qualcomm Flash Tool->QcomDLoader.exe if it start then good....and if there is an error like MSVCP100.dll not found or something else
then install QPST tool and run it. After opening it now close it.....Now again click on QcomDLoader.exe this time it will work:good:
then click on Load button(the first icon of the tool) then browse the firmware folder where u have extracted...then click on start(the 3 icon of the flash tool)
STEP 3:..Now remove Your sim card and memory card(if u don't have this then also remove your battery and then put it again)...
Now hold volume+ and volume - button(do not touch power button) and plug in vie usb... the flash will automatically start....
wait till it complete...after finish it will show finish in green color...then unplug the phone and hold power button to start...
This method is same for Lenovo a6000 plus the only different will be....it will show 1GB ram and 8GB internal storage
To fix this install any custom rom..,:good:
This method is tasted by me and it work for me I have Lenovo a6000 plus that's why I am sharing this with you all....
I hope this will also work for you...
if any problem occurs then please let me know..
Click to expand...
Click to collapse
For some people who dont get their phones detected need to open their motherboard and short the two points located beside memory card slot
The Hard Gamer said:
For some people who dont get their phones detected need to open their motherboard and short the two points located beside memory card slot
Click to expand...
Click to collapse
It can be told better with an image, if you can manage :-B
sasukay said:
It can be told better with an image, if you can manage :-B
Click to expand...
Click to collapse
Ok i wil try to find it
nice method thank you for sharing this will help many peoples....
MR.HACKER5476 said:
nice method thank you for sharing this will help many peoples....
Click to expand...
Click to collapse
yes bro i know how it feel when phone get brick...
The phone boots shows logo restarting and it keeps on restarting
chriselanko said:
The phone boots shows logo restarting and it keeps on restarting
Click to expand...
Click to collapse
install any custom rom or do factor reset
if you have done this above but still have the problem then answer my question
u r currently instead rom android version ?
is custom recovery is flashed?
do u have used any patch zip to upgrade or downgrade the android version ?
soan0 said:
install any custom rom or do factor reset
if you have done this above but still have the problem then answer my question
u r currently instead rom android version ?
is custom recovery is flashed?
do u have used any patch zip to upgrade or downgrade the android version ?
Click to expand...
Click to collapse
I am not able to acess recovery mode.
can enter fastboot but not recovery.
I have also attached the screenshot of final status while flashing.
I followed all steps .
bro its taking too much time what to do its tooked about 11 min and still okeep going
soan0 said:
HELLO FRIENDS...
Many friend have face this problems i.e no recovery,no splash screen,no system only just a small vibration this is know as Hard-Brick..
This method will 100% works for both Lenovo a6000 and plus...
for this we need the following things....
Firmware-File(this is stock rom is for Lenovo a6000 but can be use for Lenovo a6000+)
QPST Tool
and well working computer or Laptop..
Thing want to know before starting...
We will not use QPST tool for flashing this is optional. After installing QPST tool the error face by most computer will be fixed error like MSVCP100.dll error mostly this problem is face by 64bit OS..If you have installed 64bit try it if it's works then good if not then use your friend's PC which have 32bit OS or install 32bit OS
We will use flash tool which already given in Firmware zip.
Let's Start...:laugh:
After downloading the firmware You'll get firmware folder and Qualcomm Flash Tool and most important drivers folder there will be more files but no use of those file.
STEP 1.First extract this above 3 file in a folder where you want...then click on driver folder and then click on Qualcomm_USB_Driver_Setup.exe......setup will start...select the first option(WWWAN.DHCP........) and then next...further you can do.. while installation if a pop-up comes click on yes(all ways click on yes) after completion of driver installation please reboot or restart you are pc or laptop ..:good:
STEP 2...click on Qualcomm Flash Tool->QcomDLoader.exe if it start then good....and if there is an error like MSVCP100.dll not found or something else
then install QPST tool and run it. After opening it now close it.....Now again click on QcomDLoader.exe this time it will work:good:
then click on Load button(the first icon of the tool) then browse the firmware folder where u have extracted...then click on start(the 3 icon of the flash tool)
STEP 3:..Now remove Your sim card and memory card(if u don't have this then also remove your battery and then put it again)...
Now hold volume+ and volume - button(do not touch power button) and plug in vie usb... the flash will automatically start....
wait till it complete...after finish it will show finish in green color...then unplug the phone and hold power button to start...
This method is same for Lenovo a6000 plus the only different will be....it will show 1GB ram and 8GB internal storage
To fix this install any custom rom..,:good:
This method is tasted by me and it work for me I have Lenovo a6000 plus that's why I am sharing this with you all....
NOTE:-after coming back to KitKat you may face the problem of boot loop for 7.x.x rom or some feature of the rom may not work..to overcome this problem follow this
download this twrp KitKat version(not so important) you can use cwm(not tested) and direct flash the lollipop rom which contain system.img file in it eg. vibe 2.5(tested and works) ,color os 3.1 or any rom which contain system.img and reboot.:good:
do not use any pach file for upgrading to lollipop do direct flash lollipop rom.
I hope this will also work for you...
if any problem occurs then please let me know..
Click to expand...
Click to collapse
its taking too much time and keep going what to doo
shivanshusuraj said:
its taking too much time and keep going what to doo
Click to expand...
Click to collapse
which buttons u have pressed at the start
bro turn off u r phone then remove u r sim and memory card (not necessary) then press and hold volume + and volume - (don't touch power button )together till u feel a soft vibration then only connect to u r pc
yes i remover all things no sim no memory and i hode both volume key then plug usb
soan0 said:
which buttons u have pressed at the start
bro turn off u r phone then remove u r sim and memory card (not necessary) then press and hold volume + and volume - (don't touch power button )together till u feel a soft vibration then only connect to u r pc
Click to expand...
Click to collapse
yes i remover all things no sim no memory and i hode both volume key then plug usb and then it vibrate and connected but its took 23 min but not done then i remover usb directly
chriselanko said:
I am not able to acess recovery mode.
can enter fastboot but not recovery.
I have also attached the screenshot of final status while flashing.
I followed all steps .
Click to expand...
Click to collapse
bro now u can flash custom recovery i.e TWRP,CWM as par u r android version
i think u know that how to do ..if not then plz check how to flash twrp or cwm in Lenovo a6000
shivanshusuraj said:
yes i remover all things no sim no memory and i hode both volume key then plug usb and then it vibrate and connected but its took 23 min but not done then i remover usb directly
Click to expand...
Click to collapse
u r drivers are install properly plz check which phone do u have
if u have serious problem then whatsapp me 9763697739
shivanshusuraj said:
yes i remover all things no sim no memory and i hode both volume key then plug usb and then it vibrate and connected but its took 23 min but not done then i remover usb directly
Click to expand...
Click to collapse
if it possible to format u r pc then do it and again do all the step if not then try this hole guide in u r friend pc
Still Bootlooping / no recovery
soan0 said:
bro now u can flash custom recovery i.e TWRP,CWM as par u r android version
i think u know that how to do ..if not then plz check how to flash twrp or cwm in Lenovo a6000
Click to expand...
Click to collapse
1) Flashed Sucessfully the given frimware using the tool in the folder.
2) Phone still in boot loop.
3) Tried to flash Twrp image you mentioned in this thread, it flashed sucessfully but cannot able to acess recovery by hardware button combinations or by any means.
4)Tried Flashing Vibe 2.5 Lollipop ROM using fastboot ( using command fastboot update E:\vibe.zip ). It showing errors like
" archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
"
5) Please help me with this and tell me where was I wrong. Am not a PRO, just a beginner So please give detailed instructions if am wrong. Thank you @soan0
chriselanko said:
1) Flashed Sucessfully the given frimware using the tool in the folder.
2) Phone still in boot loop.
3) Tried to flash Twrp image you mentioned in this thread, it flashed sucessfully but cannot able to acess recovery by hardware button combinations or by any means.
4)Tried Flashing Vibe 2.5 Lollipop ROM using fastboot ( using command fastboot update E:\vibe.zip ). It showing errors like
" archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
"
5) Please help me with this and tell me where was I wrong. Am not a PRO, just a beginner So please give detailed instructions if am wrong. Thank you @soan0
Click to expand...
Click to collapse
Bro after flashing wait for few min it take time to boot up
And try to flash vibeui 2.5 by twrp which i have given the link if still have a problem then whatsapp me or call so that i can understand u r problem correctly
9763697739
soan0 said:
Bro after flashing wait for few min it take time to boot up
And try to flash vibeui 2.5 by twrp which i have given the link if still have a problem then whatsapp me or call so that i can understand u r problem correctly
9763697739
Click to expand...
Click to collapse
After flashing , i just power on the device and left it. it just keeps on restarting. (ie what i mentioned as boot loop).
I cannot acess TWRP then how can i flash vibe 2.5 using it.
Sry I didnt get you, I send the video of the phone in your whatsapp number.
even using " fastboot boot twrp.img" command it is showing sucessful in cmd promt but while device keeps restarting
chriselanko said:
I am not able to acess recovery mode.
can enter fastboot but not recovery.
I have also attached the screenshot of final status while flashing.
I followed all steps .
Click to expand...
Click to collapse
If you can't enter recovery your simplest method would be flashing recovery through fastboot mode..
Hi there!
I ported this TWRP recovery from Mi pad 3 and it works perfectly! It was tested on official firmware TOS-V2.01-A921 (Phoenix OS), I don't know will it work on older firmwares or not (try at your own risk). All user data and storage will be fully erased!
Step 1
First of all you need to unlock bootloader. It's required ADB to be installed on your PC, because it will be done via fastboot.
Follow this steps:
-connect the tablet to pc, (first you have to enable OEM unlocking and USB debugging in Developer options)
- reboot the tablet in fastboot mode, hold buttons “power+Vol +” at startup, choose fastboot mode with Vol+ button, valid with Vol-
- open a command prompt in adb folder, then “fastboot devices”, then “fastboot oem unlock”, it should say “OKAY, finished”
Now it's done.
Step 2
Download this archive and unpack it (contains everything you need) - https://mega.nz/#!C1w0GaAI!Zw1QXuAgBLNOjymsWanQPuoKr8N6IhPAhuZy1yjlv-k
- Install MTK drivers
- Click on Flash_tool.exe
- Select "scatter-Loading" and search MT8173_Android_scatter.txt
- Press "recovery" and add path (choose) recovery file - TWRP 3.2.3
- Select "Download Only"
- Turn off your tablet and wait some seconds
- Press “Download” button in FlashTool programm to start
- Connect your tablet into the computer via USB data cable holding volume + button (do not press power button!).
- The process will start and a red progress bar will appear after color purple, yellow. Finally, green circles should display.
That's all. Now you should flash TWRP: hold buttons “power+Vol +” at startup, choose recovery mode with Vol+ button, valid with Vol- (alike in step 1)
If you face Error message like this:
BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)
Obtain DRAM Failed!
Please check your load matches to your target which is to be downloaded.
Do this steps: choose scatter load -> load TWRP file ->[/B ]Push download button -> plug in the usb cable without pushing volume up
Step 3
Now it is required to format internal storage to be displayed properly (you will see 0 mb storage size). Just go to wipe section and choose "wipe data" option (write "yes" on keybord and accept).
After this reboot recovery ( go to reboot section -> reboot recovery)
Step 4
Connect tablet to PC and copy Magisk package to internal storage (Magisk should be flashable via TWRP in .zip format and can be found in appropriative thread). I've succesfully installed Magisk v17.1.
Afterwards, go to install section -> install package and reboot device (no wipes after installation are required). If it will ask for installing TWRP app , just cancel that.
All above-described actions should be fully completed, sure nothing is missed ! Because in this case your tablet will not boot!
So, that's all ! Let me know if you face any issues. Enjoy
Custom ROMs for TWRP can be found here:
Modified stock ROM - https://forum.xda-developers.com/android/help/firmware-modified-stock-rom-v2-01-t3894124
ASUS ZenUI ROM - https://forum.xda-developers.com/android/help/firmware-asus-zenui-rom-teclast-t8-t3898591
MIUI 10 ROM (stable!) - https://forum.xda-developers.com/android/help/firmware-miui-10-rom-teclast-t8-beta-t3910219
Pixel Experience ROM - https://forum.xda-developers.com/android/help/firmware-pixel-experience-rom-teclast-t8-t3919512
>> P.S. In the nearest future I will release some custom ROM'S for our device, at least Stock ROM for flashing via TWRP with ROOT added.
This will be amazing - THANK YOU!
Thank you for your tuto.
I want to put your asus rom in my teclast T8.
On my computer flash tool don't seems to work. I have a screen sp flash tool is loading and then, nothing.
I am on Win10 and try all compatibility mods and admin mod..
Any idea ?
naonilio said:
Thank you for your tuto.
I want to put your asus rom in my teclast T8.
On my computer flash tool don't seems to work. I have a screen sp flash tool is loading and then, nothing.
I am on Win10 and try all compatibility mods and admin mod..
Any idea ?
Click to expand...
Click to collapse
Try to install drivers for win 10 from: https://forum.xda-developers.com/showthread.php?t=1982587. For me it works perfectly on win 7,8. But it is recommended to use version of SP flashtool I attached here for our device.
Sword900 said:
Try to install drivers for win 10 from: https://forum.xda-developers.com/showthread.php?t=1982587. For me it works perfectly on win 7,8. But it is recommended to use version of SP flashtool I attached here for our device.
Click to expand...
Click to collapse
Looks that this issue is caused by very unfortunate folder naming in zip archive. Remove "," from folder names and you should be fine . Just remember to do that also for folder T8 TWRP RECOVERY - otherwise you will face "scatter file invalid" error later.
hello sword900,
i have downloaded your mtkflash tool but i have always an issue with the download of your recovery to the tablet.
every time, i have an flash error 4051 dram or so.
i have many tried this with different mtk drivers and disabling windows driver signature but it wont work.
after that i have installed the last official firmware V2.01-A921.
the installation was successful and that approved that my setup is ok.
i think there is a mistake between the recovery file and the scatter information.
have you any idea, what i can do to solve this problem?
thanks in advance
dreas
ok, i have found the solution. with an other flash tool and scatter file it works.
now i have tried the asus and stock rom.
it seems to be that the asus rom has gps funktionality. nice!
dreas74 said:
ok, i have found the solution. with an other flash tool and scatter file it works.
now i have tried the asus and stock rom.
it seems to be that the asus rom has gps funktionality. nice!
Click to expand...
Click to collapse
Yeah, this recovery works only on last firmware TOS v2.01. As I know, our device is not supplied with GPS module, so it won't work. Anyway let me know about your experience after testing my ROMs
dreas74 said:
ok, i have found the solution. with an other flash tool and scatter file it works.
now i have tried the asus and stock rom.
it seems to be that the asus rom has gps funktionality. nice!
Click to expand...
Click to collapse
I also solve mi matter with an other flash tool and scatter file !
I am on the asus ROM for the moment and that's working like a charm, thank you for your work.
---------- Post added at 11:04 PM ---------- Previous post was at 11:02 PM ----------
alex.niemnozka said:
Looks that this issue is caused by very unfortunate folder naming in zip archive. Remove "," from folder names and you should be fine . Just remember to do that also for folder T8 TWRP RECOVERY - otherwise you will face "scatter file invalid" error later.
Click to expand...
Click to collapse
I can confirm, I lost probably many thousands of my hairs with that problem !
Tried somebody this solution on 1.10? Will it work, or i have to update to TOS-V2.01-A921?
Teclastt8 said:
Tried somebody this solution on 1.10? Will it work, or i have to update to TOS-V2.01-A921?
Click to expand...
Click to collapse
You can try this but I don't think stock firmware will boot after this. So, you can install twrp and flash custom ROM. Anyway all your data will be lost...
Sword900 said:
You can try this but I don't think stock firmware will boot after this. So, you can install twrp and flash custom ROM. Anyway all your data will be lost...
Click to expand...
Click to collapse
:good: Thank you! I don't want to use the original, I want to use your asus rom, just asked it because i want to know that the 2.01 is necessary or not.
Excuse my bad English!
Another question... if i want back the original 1.10, i only need install it via SP flash tool?
Teclastt8 said:
:good: Thank you! I don't want to use the original, I want to use your asus rom, just asked it because i want to know that the 2.01 is necessary or not.
Excuse my bad English!
Another question... if i want back the original 1.10, i only need install it via SP flash tool?
Click to expand...
Click to collapse
Yeah, you should do firmware upgrade via SP flash tool in this case.
Hi, i have tried to install TWRP for a couple days now on my Teclast T8. Tried several different drivers, scatter-files and Smart Phone Flash Tool. Any hints that i have missed?
Error message with included Smart Phone Flash Tool, scatter and TWRP.
BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)
Obtain DRAM Failed!
Please check your load matches to your target which is to be downloaded.
Windows 10 10.0.17763
Build Number in Android: TOS V2.01_20180612
MediaTek USB Port (COM3) Driver 3.0.1504.0
pB2NP said:
Hi, i have tried to install TWRP for a couple days now on my Teclast T8. Tried several different drivers, scatter-files and Smart Phone Flash Tool. Any hints that i have missed?
Error message with included Smart Phone Flash Tool, scatter and TWRP.
BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL (5054)
Obtain DRAM Failed!
Please check your load matches to your target which is to be downloaded.
Windows 10 10.0.17763
Build Number in Android: TOS V2.01_20180612
MediaTek USB Port (COM3) Driver 3.0.1504.0
Click to expand...
Click to collapse
Just read some previous posts, it should help. Remove all commas,spaces etc in all folders' names. If not - try to use another scatter file and version of SP flashtool.
Sword900 said:
Just read some previous posts, it should help. Remove all commas,spaces etc in all folders' names. If not - try to use another scatter file and version of SP flashtool.
Click to expand...
Click to collapse
Thanks for replying!
As you can see in this picture i have replaced the spaces in folder and file names.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Could you please refer to other scatter files that may work? I have tried with SP flashtool v 5.1824 aswell, but it's the same error there.
If I remember correctly, I did it that way:
scatter load->Twrp load->Push download button->without push volume up, plug in the usb cable
Try this, if nothing else can help.
Teclastt8 said:
If I remember correctly, I did it that way:
scatter load->Twrp load->Push download button->without push volume up, plug in the usb cable
Try this, if nothing else can help.
Click to expand...
Click to collapse
Yeeez... That worked. Thanks a lot.
@Sword900, could you add this in the description for other frustrated people like me?
I have two new T8, when i try to start new instalation latest version of facebook, messenger, instagram apps, apps can not start. App closed, send report or restart it. Not working. Tried with 1.10 and 2.10 firmware but result is the same. Others apps or games are ok. Any idea to fix it? Thank you.
Error
Deleted.
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
ankitnaik16 said:
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
Click to expand...
Click to collapse
Having the same problem. Is there a firmware available online for flashing?
Cedric Miraflor said:
Having the same problem. Is there a firmware available online for flashing?
Click to expand...
Click to collapse
it is possible to flash with sp tool but it require scatter file can someone provide scatter file of realme 6
ankitnaik16 said:
it is possible to flash with sp tool but it require scatter file can someone provide scatter file of realme 6
Click to expand...
Click to collapse
By using sp tool is it required for the device to go to fast boot mode? because currently we cant access fastboot using power down with power button
Cedric Miraflor said:
By using sp tool is it required for the device to go to fast boot mode? because currently we cant access fastboot using power down with power button
Click to expand...
Click to collapse
SP Tool work in Download Mode it can be access by pressing volume up + volume down key while phone is off
I see. Im just waiting for somebody with the scatter file for this device
ankitnaik16 said:
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
Click to expand...
Click to collapse
You can't flash it through SP flash or any flash tool. Realme Doesn’t allow user to flash it by their own though Xaomi Samsung Allow user to flash their own Android. I also tried but after downloaded 12 GB file its need authenticating id provided by Realme. Just take it to care and let them fix it. Never buy Realme ?
RantiHasan said:
You can't flash it through SP flash or any flash tool. Realme Doesn’t allow user to flash it by their own though Xaomi Samsung Allow user to flash their own Android. I also tried but after downloaded 12 GB file its need authenticating id provided by Realme. Just take it to care and let them fix it. Never buy Realme
Click to expand...
Click to collapse
You Are right Never Buy Realme
I finally went to service center process is too slow and tedious
Going to sell this phone and buy oneplus nord
ankitnaik16 said:
1.unlock bootloader
2.flashed magsik boot.img
3.lock bootloader
4. infinity bootloop cant enter fastboot mode
Click to expand...
Click to collapse
i think realme dont allow you install patched boot when bootloader locked, you should leave bootloader unlocked and never locked it again if you want modified your device.
Same
just like me bro After I can't enter the system (bootloop) now I can't enter recovery mode, and again I want to flash Realme 6 but can't, I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment,
Letinamazuki said:
just like me bro After I can't enter the system (bootloop) now I can't enter recovery mode, and again I want to flash Realme 6 but can't, I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment,
Click to expand...
Click to collapse
You find solutions
I have same issue. I went to sc and they said they couldn't detect the phone on pc, then they provide one only solution which to replace the whole circuit board
did anyone found any solution?
2021, Please, i want any solution
solution is in the link below
[GUIDE] UNBRICK/DOWNGRADE YOUR REALME 6/6I(INDIA)/6S USING SPFLASH TOOL FOR FREE!
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY...
forum.xda-developers.com
mercan01 said:
solution is in the link below
[GUIDE] UNBRICK/DOWNGRADE YOUR REALME 6/6I(INDIA)/6S USING SPFLASH TOOL FOR FREE!
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX2001, RMX2002 and RMX2003 ONLY...
forum.xda-developers.com
Click to expand...
Click to collapse
I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment, the phone in eternal black screen
erickdiazw said:
I can't even enter EDL mode,(power & button plus + minus) on my PC was only detected for a moment, the phone in eternal black screen
Click to expand...
Click to collapse
I have the same issue. Did you find any solution?
The solution is easy, just need follow de guide,
1 install python and LibUSB Win
2 the phone is black screen, just press power putton and volume + for 10 seconds (The Phone will reboot, stop pressing buttons)
3 (You need be fastt) instantly press power button and volume -, connect the phone to pc and next press volume +, dont stop pressing (Lib USB Win already installed and open on your PC)
4 Select Mediatek On LibUSB Win, install, and all its ready,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5 The phone automatically reboots, you need to do step 2 and 3 again, but instead of LIbUSB WIn it will be brom.bat
6 If you followed all this steps good, your phone be ready to unbrick
erickdiazw said:
The solution is easy, just need follow de guide,
1 install python and LibUSB Win
2 the phone is black screen, just press power putton and volume + for 10 seconds (The Phone will reboot, stop pressing buttons)
3 (You need be fastt) instantly press power button and volume -, connect the phone to pc and next press volume +, dont stop pressing (Lib USB Win already installed and open on your PC)
4 Select Mediatek On LibUSB Win, install, and all its ready,
5 The phone automatically reboots, you need to do step 2 and 3 again, but instead of LIbUSB WIn it will be brom.bat
6 If you followed all this steps good, your phone be ready to unbrick
Click to expand...
Click to collapse
Hi @erickdiazw
This is for MediaTek chipset , any solution for Qualcomm Chipset?
I have a hardbricked Realme 6 Pro device because of re-lock bootloader
gaduaxe said:
Hi @erickdiazw
This is for MediaTek chipset , any solution for Qualcomm Chipset?
I have a hardbricked Realme 6 Pro device because of re-lock bootloader
Click to expand...
Click to collapse
I'm sorry bro, i have Realme 6 with MediaTek, idk for Qualcomm :c