What's this ? - It is simple request for GT-P75xx owners to share their build info.
Why ? - Some SGT 10.1 can't run CWM Recovery higher than 5.5.0.4 or JB. We are at least 2 who have started thread about our issues. The links are at the end of this but in short, our tabs hang on a black screen when we flash CWM Recovery 6.x or any JB rom. While trying to find a solution (or at least what's causing this), something interesting came up, our build info seems different.
Partial build info from the 2 tabs that don't work.
Hardware: p3
Board: GT-P7500V on mine, GT-P7510 on the other one
Device: GT-P7500V on mine, GT-P7510 on Adam's
Partial build info from 2 tabs that DO work
Hardware: p3
Board: p3
Device: p4
So we're wondering now if this issue has anything to do with the Board and Device values but data from only 4 tabs is not enough to draw a conclusion.
I want to collect info on tabs that can or can't run CWM 6/JB and compare 5 fields from the build info to see if it's conclusive. If we find only one tab running CWM6/JB that has the model number in the Board and Device fields then we'll know it's not the problem.
This is why I need your help.
If you own a rooted GT-P75xx and wish to help, please use "Android System Info" from the Play Store or any other method you like to get your build info and post the following information.
Your running Android Version and ROM name
CWM Recovery version
Bootloader
Hardware
Board
Device
Model
Product
http://forum.xda-developers.com/newthread.php?do=newthread&f=1192
http://forum.xda-developers.com/showthread.php?t=2376284
To start the list, here's my info.
Android: HC 3.2 stock
Recovery: CWM 5.5.0.4
Bootloader : P7500XXLA1
Hardware : p3
Board : GT-P7500V
Device : GT-P7500V
Modele : GT-P7500V
Product : GT-P7500V
You know, those values are actually in build.prop. I believe mine is p4 because I'm running aosp ROM. For stock based ROMs I think it is P7500/P7510. Hence, yours is P7500V. You can flash cm9 right? Then flash it and check your build.prop.
Sent from my GT-P7500 using Tapatalk HD
eushaun99 said:
You know, those values are actually in build.prop. I believe mine is p4 because I'm running aosp ROM. For stock based ROMs I think it is P7500/P7510. Hence, yours is P7500V. You can flash cm9 right? Then flash it and check your build.prop.
Sent from my GT-P7500 using Tapatalk HD
Click to expand...
Click to collapse
I realize they're in build.prop but I am wondering if the values put there by Samsung are indicative of some different hardware that can't run newer recoveries and JB.
Android: JB 4.2.2
Recovery: TWRP 2.6.0.0 (I had CWM 6.0.3.0 before)
Bootloader: P7500XXLA1
Hardware: p3
Board: p3
Device: p4wifi
Model: GT-P7510
Product: GT-P7510
Here is my infos of my Videotron P7500V after i "Pimped" it to CM10.1
Work flawlessly... And its not a p3 or p4, its a P4TMO so use the Bootloader from the tmobile is version to get it booting past cwm 5.0.3.3 !
Ill post a tutorials as soon as i get on my computer so stay in touch !
BuildInfos
Android version : 4.2.2
Release Codename : REL
API LEVEL : 17
CPU ABI : armeabi-v7a
Manufacturer : samsung
Bootloader : P7500XXLA1
CPU ABI2 : armeabi
Hardware : p3
Radio : T859UVLH6
Board : p3
Brand : samsung
Device : p4tmo
Display : cm_p4tmo-userdebug 4.2.2 JDQ39E eng.jenkins.20130908.101941 test-keys
Fingerprint : samsung/SGH-T859/SGH-T859:4.0.4/IMM76D/VLH6:user/release-keys
Host : cyanogenmod
ID : JDQ39E
Model : SGH-T859
Product : SGH-T859
Tags : test-keys
Type : userdebug
User : jenkins
Sent from my SGH-T859 using xda app-developers app
Related
My tablet is from the chinese one. It is model T02A like the Eken`s one.
But i want the original firmware wich was crane-evb:4.0.3 IML74K 20120328 eng test-keys
But i cant find it in the net i found a similar one but my toch keys like home back don`t work cuz the firmware i use is made for physical keys. I hope you can provide me with this one i want. Thanks
Have you tried contacting the people you bought it from originally, I know it will be difficult to find the actual firmware on the web, although you have a clue that it was 20120328 that may not have been the actual version. The only way of finding the actual version would be to look in the /mnt/flash/ text file if it was updated correctly.
I contact with them and they send me the firmware for it.
Sent from my T02A using XDA
smyrfcheto said:
I contact with them and they send me the firmware for it.
Sent from my T02A using XDA
Click to expand...
Click to collapse
Hi,
Please can you share if you have a copy as I would also like to keep it as a backup
I can share it to you but I am on a hollyday till Wensday. When i got back home i will give it to you. It is a stock rom but it is rooted
I have same problem
When you share the link pls give me too
Hello, I need firmware for t02a . The ones on the website (T02) doesn't let me use the touch screen.
If anyone manages to find the T02A firmware, I need it too. My touchscreen also doesn't work (well, it does, but the axes are reversed) with the T02 firmware from Eken's website.
Here is my firmware. I am using it and i don`t have any problems
Part1 - http://www.mediafire.com/?wa3sjiqeeqyjve4
Part2 - http://www.mediafire.com/?xfb4kjmdd6d677x
Just download the two files. Unrar them with winrar. Install LiveSuite and flash your tablet EKEN T02A
If you have any problems after the flashing of this firmware just say here to discuss them and find a solution
And if you want use this tewal http://www.mediafire.com/?j0nb38frzefn6c6 for vold.fstab . There is a thread for it how to make it ---> http://forum.xda-developers.com/showthread.php?t=1680771
Thanks for posting the firmware, but are you sure this is the correct image? It has the same CRC32 as the T02 firmware currently available from the eken.com/support webpage, and has the same touchscreen axis problem on my unit.
Do you know what firmware you tried that didn't work for your unit? Maybe that is the one I need...
(As an aside, I forgot that I may not actually have the Eken T02A, although that's what it identified itself as in the system menus. It is an iRulu 7" tablet purchased from ACCDEPOT, I was reminded yesterday. I assumed they were just reselling the Eken under a different name, but maybe not.)
I contacted the folks that I purchased the tablet from, and they were able to get me a firmware file that fixed my tablet. (At least, the touchscreen works again. Which was my biggest concern.)
Thanks again for your help!
I have tried all roms for just T02A model.. EKEN, MID and etc. And all works correctly for me. So don`t look the cover of the tablets. They may be the same but the parts may be from different model.
Our tablets are different. So my rom will have problems with your tablet..Atleast you have 256 RAM i have 512. This is one of the differences between our tablets. I am glad that you have found fix for your touch screen
zdooder said:
I contacted the folks that I purchased the tablet from, and they were able to get me a firmware file that fixed my tablet. (At least, the touchscreen works again. Which was my biggest concern.)
Thanks again for your help!
Click to expand...
Click to collapse
Would you be kind to share the firmware?
The firmware image they sent me is titled:
sun4i_crane_t02a_mxc622x_v1.2敏锐
I don't have enough posts to post the links I guess (heh, too much lurking), but PM me if you need it and I can send you the links that way.
What is the clock speed of your processor? Can you post me the kernel version, baseband version, the firmware version form the system/about tablet menu
I'm not 100% sure about the CPU speed. I've seen it referred to as 1.2GhZ but I suspect it might be 1GhZ. /proc/cpuinfo shows:
Code:
Processor : ARMv7 Processor rev 2 (v71)
BogoMIPS : 1001.68
Features : smp half thumb fastmult vfp edsp neon vfpw3
CPU implementor : 0x41
CPU architecture : 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun4i
Revision : 0000
System/About tablet shows:
Code:
Model number: T02A
Android version: 4.0.3
Baseband version: 1.2
Kernel version: 3.0.8+ [email protected] #1
Build number: crane_evb_v13-eng 4.0.3 IML74K 20120423 test-keys
Hi i udpated mi firmware and now have the same problem no touch screen and no camera on my t02, please post on mediafire this firmware image file.
zdooder said:
I'm not 100% sure about the CPU speed. I've seen it referred to as 1.2GhZ but I suspect it might be 1GhZ. /proc/cpuinfo shows:
Code:
Processor : ARMv7 Processor rev 2 (v71)
BogoMIPS : 1001.68
Features : smp half thumb fastmult vfp edsp neon vfpw3
CPU implementor : 0x41
CPU architecture : 7
CPU variant : 0x3
CPU part : 0xc08
CPU revision : 2
Hardware : sun4i
Revision : 0000
System/About tablet shows:
Code:
Model number: T02A
Android version: 4.0.3
Baseband version: 1.2
Kernel version: 3.0.8+ [email protected] #1
Build number: crane_evb_v13-eng 4.0.3 IML74K 20120423 test-keys
Click to expand...
Click to collapse
Is that build number from your most recent firmware flash provided by the seller? Also, do you notice the screen transitions (like opening settings, etc) to be extremely slow?
P.S. Does anyone know if there is a CM9 rom for this device?
Thank you!
The 20120423 build number is from the recovery flash I got from the seller.
I haven't noticed any slow screen transitions or program startups (although I would say that this tablet is not as snappy as my Motorola Xoom, but that could be differences in CPU, RAM, etc.). I tried opening the Settings and it came up in less than a second. I tried opening Netflix and it came up in about 4 seconds. While not steller performance, I consider that acceptable.
zdooder said:
The 20120423 build number is from the recovery flash I got from the seller.
I haven't noticed any slow screen transitions or program startups (although I would say that this tablet is not as snappy as my Motorola Xoom, but that could be differences in CPU, RAM, etc.). I tried opening the Settings and it came up in less than a second. I tried opening Netflix and it came up in about 4 seconds. While not steller performance, I consider that acceptable.
Click to expand...
Click to collapse
dude, I have send you a PM regarding the eken t02 firmware link: sun4i_crane_t02a_mxc622x_v1.2敏锐... pls quickie-reply to me once u send the link back via PM...cheers
Hello all,
I bought an a-pad/e-pad which came in a Superpad 3 box. Upon research it is a very hard device to locate. I am looking to root it and install a custom rom to speed up and customize the device (as we all do).
I also understand there is not much development but surely there must be one person that can point me in the direction? There is 2 roms I found for a similar device the Flytouch but I am uncertain that the rom will work on the device.
The roms I have found is Tim6a and Axlien
About Device
Model Number: Android P1001R
Android version: V2.3 2011-12-07 (001112)
Kernel Version: 2.6.32.9 [email protected] #232
Build Number: FRF85B
I downloaded the "Device Info" app to see more of the details. This is what I got:
Hardware
Manufacturer: Unknown
Model: Mercury
Hardware: imapx200
Board: Unknown
Device: Mercury
Brand: Generic
CPU: ARMv6-Compatible processor rev 5 (v6l)
Software
Android Version 2.2 - Was advertised with 2.3 !!!
Bootloader: Unknown
Unfortunately this sounds like it is a clone. The apads that I know of are all ARMv7 compatible processors. That and the fact that the About device lists the version as V2.3 2011-12-07 which would be GB but yet it is truly 2.2 just changed to say 2.3 and probably skinned to look and act a little like GB.
I'm looking for some advice about rooting my android device. I'd like su permission, so I can remove protected bloatware, use apps such as Root Explorer, etc.
The device is listed on Amazon as an Allwinner A13 (correct, I think) with Android 4.0. However, on my "tablet information" screen, the Android version is given as 4.1.1.
Here's all the info from the "about tablet" tab on the settings screen:
Model number: Q88.
Android version: 4.1.1
Baseband version: v0.4rc3
Kernel version: 3.0.8+ [email protected] #284
Build number: nuclear_evb-eng 4.1.1 JRO03C 20130531 test-keys
The device arrived with no clear documentation, and it's a bit hit-and-miss what you end up with, with these - my friend ordered the same item and ended up with a device with different apps installed, and his device was already rooted when he took it out of the box!
Is there a way to root without using a computer? (I don't have ready access to a PC right now.) I've tried Poot and a couple of other apps, but no luck so far.
Thanks in advance for any help; I'll be eternally grateful.
Sent from my Q88 using xda app-developers app
I need help too... My version is 4.2.2... Model Q88.. Firmware/v0.4rc3.. Kernel 3.0.8+ [email protected] #40. Build number- nuclear_xw711-eng 4.2.2 JDQ39 20130626 test-keys..... PLEASE!!!! Help us... We gladly appreciated....
Sent from my PC36100 using xda premium
Ah, someone in the same boat. Have you found any more info on rooting these, since your post? They obviously can be rooted - as I said, I know someone with the same model, Q88, that already had full root access, straight out of the box.
Let me know if you find anything out; I'm still looking.
With the poot/ministro method, I'm just getting an error message about a "daemon has materialised". It hasn't harmed my device, but neither am I any closer to su permission.
[rant]We really shouldn't have to jump through any hoops to get control over our own devices. Imagine if you bought a PC, and you didn't have admin access to Windows. If you ask why, you're told: "well, you might delete your system files, and we can't trust you not to!"[/rant]
Sent from my Q88 using xda app-developers app
My tablet is a allwinner a13 too. And this process worked flawlessly. But you have to use a computer.
http://forum.xda-developers.com/showthread.php?t=2166967
Sent from my Luna TAB07-100 using xda app-developers app
Cheers, I'll have to work on getting hold of a PC to use, to try that method. Thanks for the post.
Sent from my Q88 using xda app-developers app
Matthew_Shute said:
I'm looking for some advice about rooting my android device. I'd like su permission, so I can remove protected bloatware, use apps such as Root Explorer, etc.
The device is listed on Amazon as an Allwinner A13 (correct, I think) with Android 4.0. However, on my "tablet information" screen, the Android version is given as 4.1.1.
Here's all the info from the "about tablet" tab on the settings screen:
Model number: Q88.
Android version: 4.1.1
Baseband version: v0.4rc3
Kernel version: 3.0.8+ [email protected] #284
Build number: nuclear_evb-eng 4.1.1 JRO03C 20130531 test-keys
The device arrived with no clear documentation, and it's a bit hit-and-miss what you end up with, with these - my friend ordered the same item and ended up with a device with different apps installed, and his device was already rooted when he took it out of the box!
Is there a way to root without using a computer? (I don't have ready access to a PC right now.) I've tried Poot and a couple of other apps, but no luck so far.
Thanks in advance for any help; I'll be eternally grateful.
Sent from my Q88 using xda app-developers app
Click to expand...
Click to collapse
Use Uberizer v1.8 which can be found at techknow.me
Hello. Can anyone help me to root my tablet? It's Mytec MT737.
BuildInfos:
Android Version : 4.2.2
Release Codename: REL
API LEVEL : 17
CPU ABI : armeabi-v7a
Hardware: sun8i
Board : exdroid
Brand: Allwinner-Tablet
Device: polaris-p1
Display : GT736FB25Cd-TPa2-V1.0.0.0-20140327release
Please, anyone.. Help me..
FYI, already tried One Click Root, Kingo Root, E-Root, Myamar Root, Master Root....No luck..Cant root either..FYI also, i cant detect where my adb on sdcard.. and....theres no auto install phone device when i connected my tablet to PC via USB..Please9.. Help me......ANyone????Tysm for advance....
Hi all
I've rooted and flashed my past few HTC devices without issue thanks to all the great info here, but have now stumbled onto a more challenging android handset!
My nephew has purchased a cheap HTC One M8 copycat from a market seller here in Taiwan, with the expected result being that he's somewhat disappointed with the end result! It's now fallen to me to see if I can do anything with it. Since it's a copycat I have absolutely no idea what it really is on the inside.
I ran VROOT on it as I heard that worked quite well with Spreadtrum devices which I gathered this to be. VROOT was successful in rooting it, but since then is unable to connect or recognise the device. In Windows Device Manager I can see the phone connected as a YunOs phone, but there is still an incomplete (yellow exclamation marked) Spreadtrum device that has yet to install correctly.
I've included below all of the information that I can get from the handset - if anyone thinks its possible to flash any kind of standard AOSP rom onto this device I'd be glad to hear any and all advice you can give!
Code:
### About ###
Model Number: One
Android Version: 4.1.0
Baseband Version: DM_Base_12A_W12.43 | sc6820_modem | 11-02-2012 17:53:08
Kernel Version: 2.6.35.7
Software Version: AD15_YLSM_V1.1.8
Hardware Version: V1.0.1
### Some extra (possibly relevant) info provided by System Info for Android (by ElectricSheep) ###
Android ID: eefdfdad09d60485
Release Codename: REL
API Level: 10
CPU ABI: armeabi-v7a
Manufacturer: sprd
Bootloader: Unknown
CPU ABI2: armeabi
Hardware: SP8810
Board: sp6820gb-ad15r480x854
Brand: sprd
Device: hsdroid
Display: AD15_YLSM_V1.1.8
### Windows Device Manager ###
YunOS ACB Interface: USB\VID_1782&PID_5D04&REV_0229&MI_01
Spreadtrum Phone: USB\VID_1782&PID_5D04&REV_0229&MI_03
Also some pics of the handset if anyone is at all interested in the latest knock-off M8 on the market...!
There really is not much you can do. No kernel source or even stock roms for it.
zelendel said:
There really is not much you can do. No kernel source or even stock roms for it.
Click to expand...
Click to collapse
That was what I feared. In that case I will use it as an excellent opportunity for experimentation and potentially irreversible damage!
For anyone stumbling onto this thread, here are the resources I've found so far to help you out.
Windows drivers (SCI-android-usb-driver-jungo-v4) [http://bit.ly/Zl4562]
Rooting tool (VROOT) [http://www.mgyun.com/en/getvroot]
Full backup instructions [http://forum.xda-developers.com/showpost.php?p=39270468&postcount=1]
File archive (including a full backup from my device for those in need) [http://1drv.ms/1qTPx6s]
I'll update as and when I have more...
I know its probably dumb but i got it free and tried to identify device and hardware for days. I would like the Stock firmware so i can root and install custom
reply to myself?? whatever...this is what i found so far, dont know if the info is spoofed or what
Using Inware app
System
OS= Android version Oreo 8.1
Released with Oreo 8.0
Sec. Patch= April5, 2021
Build #= OPM2.171019.012 release-keys
Build ID= OPM2.171019.012
Board=sp7731e_ih10
HARDWARE=sp7731e_1h10
Kernel Ver.= 4.4.83
BaseBand ver.=FM_17C_W18.39.6_P23|sc7731e_modem| 11-20-202004:14:57
Fingerprint= SPRD/sp7731e_1h10_native/sp7731e_1h10:8.1.0/ OPM2.171019.012/30609:user/release-keys
DEVICE
Brand= Welcome
Manufacturer= Welcome
Product=S21PLUS_Ultra
Model= S21+Ultra
IDENTIFIERS
Android ID= 00d569d809b53e65
GFS ID= 3f56385f8e4806a8
HARDWARE=Spreadtrum SC7731e
Supported ABIS= armeabi-v7a, armeabi
CORES= 4
CLUSTERS= 1
core1-4 usage= 768-1300mhz
GPU
VENDOR= ARM
Renderer= Mali-T820
within the inware app i installed something called "mediaDRM"
Algorithms= AES/CBC/NoPadding,HmacSHA256
Device Unique ID= wRsR4QUSyieSTzkRtypqqbRVMHBosbICDM1yOR2xmg=
vendor= Google
Version= v5.1.0-android
Security level= L3
CLEAR KEY CDM
Vendoe= Google
Version= 1.0
ok sorry if i put this info i the wrong place..just need help so i can hopefully ROOTand possible install custom ROM. Would love to make sure all Chinese crap is off phone
RAMBO=NOOB said:
reply to myself?? whatever...this is what i found so far, dont know if the info is spoofed or what
Using Inware app
System
OS= Android version Oreo 8.1
Released with Oreo 8.0
Sec. Patch= April5, 2021
Build #= OPM2.171019.012 release-keys
Build ID= OPM2.171019.012
Board=sp7731e_ih10
HARDWARE=sp7731e_1h10
Kernel Ver.= 4.4.83
BaseBand ver.=FM_17C_W18.39.6_P23|sc7731e_modem| 11-20-202004:14:57
Fingerprint= SPRD/sp7731e_1h10_native/sp7731e_1h10:8.1.0/ OPM2.171019.012/30609:user/release-keys
DEVICE
Brand= Welcome
Manufacturer= Welcome
Product=S21PLUS_Ultra
Model= S21+Ultra
IDENTIFIERS
Android ID= 00d569d809b53e65
GFS ID= 3f56385f8e4806a8
HARDWARE=Spreadtrum SC7731e
Supported ABIS= armeabi-v7a, armeabi
CORES= 4
CLUSTERS= 1
core1-4 usage= 768-1300mhz
GPU
VENDOR= ARM
Renderer= Mali-T820
within the inware app i installed something called "mediaDRM"
Algorithms= AES/CBC/NoPadding,HmacSHA256
Device Unique ID= wRsR4QUSyieSTzkRtypqqbRVMHBosbICDM1yOR2xmg=
vendor= Google
Version= v5.1.0-android
Security level= L3
CLEAR KEY CDM
Vendoe= Google
Version= 1.0
ok sorry if i put this info i the wrong place..just need help so i can hopefully ROOTand possible install custom ROM. Would love to make sure all Chinese crap is off phone
Click to expand...
Click to collapse
very similiar to the itel a33 software(w5001).......any ideal out there
To install a Custom ROM it's not required that phone's actual Android gets rooted beforehand, but a suitable Custom Recovery got flashed.
jwoegerbauer said:
To install a Custom ROM it's not required that phone's actual Android gets rooted beforehand, but a suitable Custom Recovery got flashed.
Click to expand...
Click to collapse
hey thank you for the response, fortunately do have adb and fastboot and i had at least accomplished a connection from phone to comp.., unfortunately i broke that phone and have moved on to a maxwest nitro 5p, which i am attempting to unlock the bootloader. apparently the bootloader has to be unlocked in order to ROOT and install twrp and so on.. any help on the nitro 5p would be greatly appreciated, also i had this post somewhere else when i made it and some senior member moved it here
i dont kno where to post things
Start a new thread titled "Maxwest Nitro 5P - How to root / unlock bootloader"
I am working on a very similar device from OP. Welcome splash, very similar results from inware, and CPU Info. Original owner bought it from Wish, advertised as S21+Ultra, the specs are spoofed under settings, ie. S21+Ultra, Android 10, 12GB RAM, etc
The closest I have found so far is Winstar SP7731e Kimfly Mito A67, but all the sites I have found so far for firmware are paywalled.
I was trying to find a way to backup the device without root, or custom recovery, before trying too much with it. Unfortunately, it seems as though there is a lack of information, or I have no idea where to look.
Any new info, or leads would be much appreciated.