:crying::crying: Upgraded to 4.2 using sp flash tools, flashed custom roms, was very satisfied but then a problem occured and i flashed stock 4.1 which created all sorts of problems like flash not working, music and images not being read from the phone,etc. Tried something else flashed custom roms, stock rom etc and got the music and images to be displayed but no luck in flash . Was on Melting Rocks custom rom(credits rmuntazir) and just now flashed jb,still no luck with the camera flash. It was working absolutely fine before. I dont remember when the problem started. Please help me and could you tell me what went wrong?
P.S. Even flash light apps are unable to access it. When I open the app and switch on light there is no change but the app tells that it has switched on flash
Related
Recently I switched back to pacman rom after trying out some of the others roms contained in the development centre. However after performing a full wiped and flash back into PACman rom. Install TB and tries to backup it says my phone is not rooted how come? I tried flashing to other roms like slimbean,revolt and its working fine.
change the kernel (dorminax v8.14 is table for me ), this might be probably the problem
Hi, I have searched and searched but i can't seem to find the sollution for my problem.
I'm Running the ULTIMAROM V15.1 on my GT I-9300 since yesterday and i love it credits to the devellopers!
I have backed up the stock ROM on my laptop, did an EFS backup, went back to factory settings with a ful whipe.
Next i have installed the ultimarom, with full whipe again (ticked all three boxes) and now it's running great and fast
but with some small issues. The worst one is that my camera isn't working anymore, it gives a "camera faillure" notification, and stops.
I'm tried changing kernels, first i runned boeffla, then changed to Trebuchet, no difference, im running the stock S3 cam from
the ultima package..
Is this a more common problem, because I can't seem to find more people having problems with it?
Is there a solution for it?
Malfie said:
Hi, I have searched and searched but i can't seem to find the sollution for my problem.
I'm Running the ULTIMAROM V15.1 on my GT I-9300 since yesterday and i love it credits to the devellopers!
I have backed up the stock ROM on my laptop, did an EFS backup, went back to factory settings with a ful whipe.
Next i have installed the ultimarom, with full whipe again (ticked all three boxes) and now it's running great and fast
but with some small issues. The worst one is that my camera isn't working anymore, it gives a "camera faillure" notification, and stops.
I'm tried changing kernels, first i runned boeffla, then changed to Trebuchet, no difference, im running the stock S3 cam from
the ultima package..
Is this a more common problem, because I can't seem to find more people having problems with it?
Is there a solution for it?
Click to expand...
Click to collapse
Did you try using stock kernel? Maybe flash via recovery the dump of mk6? Running it here with no camera issue
suburbadroid said:
Did you try using stock kernel? Maybe flash via recovery the dump of mk6? Running it here with no camera issue
Click to expand...
Click to collapse
Yey.. That did it.. Pff.. Breaking my skull over this for some time now..
Thought it was better to use a other kernel, turns out it didn't..
Pretty new at this, laerning every step of the way..
THNX!
Hello,
I have been googling and reading all threads about this issue for over a month now, so it's problably something quite special. Every time I try to use an app using a camera or flashlight, it reports with "Can't connect to camera" message. This first happened while trying to flash a Kitkat rom (Artas's CM11) with wrong recovery. So it was not working, I got back to system, flashed the correct recovery via flashify, got back to it and finally flashed the rom. Ever since that the camera has not been working, with one exception - now this is the interesting thing that makes me think it's not a hw problem - while trying to do all kinds of unbricks and resets I know of (flashing all kinds of different roms, CM based, AOSP, of course all kinds of original roms) I decided to go for KDZ - so I got the original bin I found on this forum and got back to v10i and the camera worked! So I was happy that it's solved and decided to stick with stock rom. It updated to JB (the official way) and ever since, it has not been working. I have tried to flash persist images, to mess with permisions and I can't really think of any other way. (Of course I have tried to flash KDZ again the same way, but it did not work, not even on ICS).
Thanks for every idea!
I had my s2 hard bricked and now i got a new motherboard for it, the thing is that on all stock roms (2.3 and 4.1.2) the phone works perfectly but all the custom roms 4.4 5.0 6.0 the cellular does not work, it gives me no service, tried flashing modem from cwm but no change.
i also tried different recoveries etc but custom rom no service
sometimes in custom rom imei used to be blank but it comes back after reboot, in stock no issues at all
any idea what im doing wrong or is there something up with the new board?
thanks,
Update
I was searching and I read somewhere that installing NeatROM by Sale will help, i downloaded and installed it, the good news is that cellular works and i have full 3G access.
Question: How to proceed further?
i could experiment but the thing is that if i flash a non-working rom (no cellular), i will have to flash stock from odin and start all over again
any ideas?
Update 2
i tried NeatROM and it worked perfectly, then i tried installing slimLP and boom, no service again, this time,my IMEI was blank too, so now i'm flashing stockrom again.
any idea anyone please?
well after somehow breaking the miui stock cam when enabling the camera2apk, and being unable to fix it by replacing build.prop, i decided to restore the backup i made in twrp earlier.
restored backup: sticks at MI logo.
tried several times, cleared caches, wiped etc etc.. will not boot after restore.
so i downloaded the stock global rom, and flashed it in twrp: sticks at MI logo. will not boot
downloaded Ressurection Remix rom, flashed that.. works fine. but i want stock or as near as possible for now.
downloaded developer miui rom, flashed that in twrp: stuck at MI logo. will not boot.
tried stock stable rom again... same story, will not boot.
downloaded Miflash, and recommended TGZ archive of ROM. followed instructions and extracted to a folder and browsed to folder with Miflash. hit "refresh"
get error "length cannot be less than zero"
tried using the "mi recovery" method (renaming rom to "update.zip" and power/vol_up)
but for whatever reason, there is no "install update" option even present.
as you can see im having a very frustrating evening. i only wanted to enable the damn google camera.
flash it by edl mode
Sent from my [device_name] using XDA-Developers Legacy app
is there a decent guide for that anywhere? from what ive seen it still requires miflash to be working? which it, frankly, just isnt. but then, nothing is! dont think ive ever had an evening where so many things which are supposed to work all give problems together.
i mean, i could understand if the custom rom was problematic, but its the only thing that *did* work.
404 Not found
well i managed to get a stock rom installed by downloading an older version of miflash... that didnt give any errors and installed the global rom fine.
i would love to know what could be causing all my problems though. seems everthing ive tried should work.
the one that is bugging me more than anything now is that whenever i enable the camera2api, the miui stock camera stops working ( crash on hdr, panorarama mode) and stays broken even if i remove mod.
this should not happen it seems, since there are guides for enabling this and adding the pro features to the camera from higher models.
nobody seems to have an opinion on it, which is very strange considering the number of people who must have done the camera2 mod...
robinlawrie said:
...nobody seems to have an opinion on it, which is very strange considering the number of people who must have done the camera2 mod...
Click to expand...
Click to collapse
I dropped miui long ago, so it is difficult to comment. However, the problem would probably be found in the settings (and/or the drivers in the system). Reinstalling a stock system image and wiping /data (and formatting it, if necessary) should solve the problem. This is, of course, a drastic step - but I would be very surprised if the problem persisted after such a step.
you have to flash lazy flasher after every MIUI stock rom flashing to be able to boot the rom...
google it "lazy flasher'