Downloaded the firmware
went to the download mode
opened odin
didn't check re-partition
started and this is what i got:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
For 30 min or more till now
Anybody know a solution?
Thanks in advance
Post lacks information .
Magic Ball does not work sorry .
jje
Which firmware were you on, which did you try flashing?
bhaveshkhatri92 said:
Downloaded the firmware
went to the download mode
opened odin
didn't check re-partition
started and this is what i got:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
For 30 min or more till now
Anybody know a solution?
Thanks in advance
Click to expand...
Click to collapse
Unfortunately I think its a problem with internal memory not been able to write on.I think its an SDS, same case of a friend we took it to a repair shop (No warranty ) but they said that only changing the motherboard can fix the problem.
I hope its not your case.If it is and your phone is still on warranty take it to them they will fix it for free.
Related
Hello, sorry to cause distubance but I have a problem.
First of all, my S2 was branded to 3 UK so I tried to debrand using:
http://forum.xda-developers.com/showthread.php?t=1064894
I did everything and started flashing but ODIN is stuck at:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> cache.img
Click to expand...
Click to collapse
It has been in cache.img for around an hour and it has not changed.
Please help!!!
Did you extract the tar file from the zip .
If so reflash with ODIN ..
jje
JJEgan said:
Did you extract the tar file from the zip .
If so reflash with ODIN ..
jje
Click to expand...
Click to collapse
Yes I did, and I tried to reflash but now it is stuck on:
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
Click to expand...
Click to collapse
Please help.
Hello, I did battery pull and it is not stuck on SetupConnection anymore but I am back to where I started, it is stuck on:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> cache.img
Click to expand...
Click to collapse
Please help as I cannot use my phone anymore!
Does it normally take this long? Should I exit Kies in the background?
Pull battery .
Download i suggest KE7
CWP UK version
http://www.multiupload.com/U1WNFZ88L0
Flash with Odin as per instructions .
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Why people flash software without reading first is beyond my understanding. You must turn off kies as it should not be running at all when using Odin
hondaguy said:
Why people flash software without reading first is beyond my understanding. You must turn off kies as it should not be running at all when using Odin
Click to expand...
Click to collapse
I'm retrying and turned off all Kies processes.
I'm using the KE7 that JJE asked me to use.
It is currently on:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Sbl.bin
Click to expand...
Click to collapse
And I have the feeling it will take a LONG time.
If there is anything else I can do to fix my phone please help.
Make sure you're using the Samsung USB cable and KIES is also closed and not running in the system tray.
Hello, I tried to flash the KE7 in ODIN but it said failed after an hour.
My phone still boots into download mode so it isnt broken.
Can someone please recommend another ROM or anything else I can do to get it back to normal? Please?
Thats either something wrong with the phone now. or you are not following instructions . Flashing via Odin is a short job not an hour long one .
Personally i would restore 3 firmware that came with the phone .
jje
I'll try reflashing the original three firmware.
Anything else?
Hi, I just tried rooting my new Samsung Galaxy S3 through Odin, all was going well until the upgrading stopped after getting to:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
it's like it just froze in the middle of upgrading.
I couldn't add a picture due to the number of my posts.
Would it be safe to remove the usb cable and plug try plugging it through the rear usb slot? On my device's screen it says "do not turn off target!!".
Thanks.
ehrenfest said:
Hi, I just tried rooting my new Samsung Galaxy S3 through Odin, all was going well until the upgrading stopped after getting to:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
You mean you we`re flashing firmware
Click to expand...
Click to collapse
hello guys
i was try repartition my samsung galaxy s3 i9300
i set odin on PIT and then still running more than 5 hours and show this status
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
and program still running .... is Odin partitioning my EMMC but slow or stopped???
should i interrupt process or not???
thx
speedman2202 said:
hello guys
i was try repartition my samsung galaxy s3 i9300
i set odin on PIT and then still running more than 5 hours and show this status
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
and program still running .... is Odin partitioning my EMMC but slow or stopped???
should i interrupt process or not???
thx
Click to expand...
Click to collapse
same as my situation ,but i'm on note 2. it should be that long. if yours are not rooted and it just happened like this then probably it may be a ic or motherboard issue.
currently my device is soft bicked when i flash a rom it says
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> factoryfs.img
<ID:0/007> NAND Write Start!!
<ID:0/007> <ID:0/007> Complete(Write) operation failed.
when i flash a kernel or a rom with the pit it says
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
plz help
sabirchowdhury said:
currently my device is soft bicked when i flash a rom it says
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> factoryfs.img
<ID:0/007> NAND Write Start!!
<ID:0/007> <ID:0/007> Complete(Write) operation failed.
when i flash a kernel or a rom with the pit it says
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
plz help
Click to expand...
Click to collapse
make sure keis is installed
reply
Thanks for replying but..
kies is/was already installed ( and thats what it showed)
sabirchowdhury said:
Thanks for replying but..
kies is/was already installed ( and thats what it showed)
Click to expand...
Click to collapse
You need to be more precise:
1. What's your device (If I remember correctly, it is a 4.0 I won't advance further to give false information)
2. What rom are you trying to flash
Upon receiving those informations, we can better help you.
1 . my device - yp-gi1cw ( international version ) / samsung galaxy player/wifi 4.2
2 . my rom - The rooted ROM of this thread http://forum.xda-developers.com/showthread.php?t=1884071
Ive flashed a kernel sucsess but now the rom
still the same problem
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> factoryfs.img
<ID:0/007> NAND Write Start!!
<ID:0/007> <ID:0/007> Complete(Write) operation failed.
ive just fixd it the broblem was my usb kept disconnetcting
i found out because it stopped at different places i fixed it by holding it in with force and staying in that position for 10 mins thanks for the help
My device lost its signal, then after I check IMEI there's no IMEI also, so I search for solution then I found that I have to reinstall the stock rom for my S6 edge.
On the process after so long downloading the rom from sammobile. Im stuck on the process of NAND Write Start!! and nothing is happening. Im using Odin3
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
I WILL PAY TO WHOM WHO WILL FIX MY ISSUE FAST
alph19 said:
My device lost its signal, then after I check IMEI there's no IMEI also, so I search for solution then I found that I have to reinstall the stock rom for my S6 edge.
On the process after so long downloading the rom from sammobile. Im stuck on the process of NAND Write Start!! and nothing is happening. Im using Odin3
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
I WILL PAY TO WHOM WHO WILL FIX MY ISSUE FAST
Click to expand...
Click to collapse
Did you download correct firmware for your phone?
What model you have?
What android version?
Network locked or unlocked?
Which firmware did you try?
Answer these and I can help