Hello, sorry to cause distubance but I have a problem.
First of all, my S2 was branded to 3 UK so I tried to debrand using:
http://forum.xda-developers.com/showthread.php?t=1064894
I did everything and started flashing but ODIN is stuck at:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> cache.img
Click to expand...
Click to collapse
It has been in cache.img for around an hour and it has not changed.
Please help!!!
Did you extract the tar file from the zip .
If so reflash with ODIN ..
jje
JJEgan said:
Did you extract the tar file from the zip .
If so reflash with ODIN ..
jje
Click to expand...
Click to collapse
Yes I did, and I tried to reflash but now it is stuck on:
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
Click to expand...
Click to collapse
Please help.
Hello, I did battery pull and it is not stuck on SetupConnection anymore but I am back to where I started, it is stuck on:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> cache.img
Click to expand...
Click to collapse
Please help as I cannot use my phone anymore!
Does it normally take this long? Should I exit Kies in the background?
Pull battery .
Download i suggest KE7
CWP UK version
http://www.multiupload.com/U1WNFZ88L0
Flash with Odin as per instructions .
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Why people flash software without reading first is beyond my understanding. You must turn off kies as it should not be running at all when using Odin
hondaguy said:
Why people flash software without reading first is beyond my understanding. You must turn off kies as it should not be running at all when using Odin
Click to expand...
Click to collapse
I'm retrying and turned off all Kies processes.
I'm using the KE7 that JJE asked me to use.
It is currently on:
<ID:0/009> Added!!
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> Sbl.bin
Click to expand...
Click to collapse
And I have the feeling it will take a LONG time.
If there is anything else I can do to fix my phone please help.
Make sure you're using the Samsung USB cable and KIES is also closed and not running in the system tray.
Hello, I tried to flash the KE7 in ODIN but it said failed after an hour.
My phone still boots into download mode so it isnt broken.
Can someone please recommend another ROM or anything else I can do to get it back to normal? Please?
Thats either something wrong with the phone now. or you are not following instructions . Flashing via Odin is a short job not an hour long one .
Personally i would restore 3 firmware that came with the phone .
jje
I'll try reflashing the original three firmware.
Anything else?
Related
Downloaded the firmware
went to the download mode
opened odin
didn't check re-partition
started and this is what i got:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
For 30 min or more till now
Anybody know a solution?
Thanks in advance
Post lacks information .
Magic Ball does not work sorry .
jje
Which firmware were you on, which did you try flashing?
bhaveshkhatri92 said:
Downloaded the firmware
went to the download mode
opened odin
didn't check re-partition
started and this is what i got:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
For 30 min or more till now
Anybody know a solution?
Thanks in advance
Click to expand...
Click to collapse
Unfortunately I think its a problem with internal memory not been able to write on.I think its an SDS, same case of a friend we took it to a repair shop (No warranty ) but they said that only changing the motherboard can fix the problem.
I hope its not your case.If it is and your phone is still on warranty take it to them they will fix it for free.
currently my device is soft bicked when i flash a rom it says
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> factoryfs.img
<ID:0/007> NAND Write Start!!
<ID:0/007> <ID:0/007> Complete(Write) operation failed.
when i flash a kernel or a rom with the pit it says
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
plz help
sabirchowdhury said:
currently my device is soft bicked when i flash a rom it says
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> factoryfs.img
<ID:0/007> NAND Write Start!!
<ID:0/007> <ID:0/007> Complete(Write) operation failed.
when i flash a kernel or a rom with the pit it says
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Can't open the serial(COM) port.
plz help
Click to expand...
Click to collapse
make sure keis is installed
reply
Thanks for replying but..
kies is/was already installed ( and thats what it showed)
sabirchowdhury said:
Thanks for replying but..
kies is/was already installed ( and thats what it showed)
Click to expand...
Click to collapse
You need to be more precise:
1. What's your device (If I remember correctly, it is a 4.0 I won't advance further to give false information)
2. What rom are you trying to flash
Upon receiving those informations, we can better help you.
1 . my device - yp-gi1cw ( international version ) / samsung galaxy player/wifi 4.2
2 . my rom - The rooted ROM of this thread http://forum.xda-developers.com/showthread.php?t=1884071
Ive flashed a kernel sucsess but now the rom
still the same problem
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> factoryfs.img
<ID:0/007> NAND Write Start!!
<ID:0/007> <ID:0/007> Complete(Write) operation failed.
ive just fixd it the broblem was my usb kept disconnetcting
i found out because it stopped at different places i fixed it by holding it in with force and staying in that position for 10 mins thanks for the help
I have a SM-N900P ON ANDROID 4.4.4. Rooted the device with CF Auto Root. Baseband/software version is now n900pvpudnk4. I found a 4.4 version of cwm and twrp. Upgraded my odin from 3.0.7 to 3.0.9. For some reason I cannot get the device to flash either of these recoveries. Odin gives these messages:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
The device then reboots and gives me message:
<ID:0/003> Removed!!
But when I reboot into recovery it just goes into download mode again. Any suggestions?
Hardware version n900p.12
Kernel 3.4.0-2593013 [email protected] #1
Are you entering download from a completely powered off state?
Sent from my SM-N900P using Tapatalk 2
penywyse said:
I have a SM-N900P ON ANDROID 4.4.4. Rooted the device with CF Auto Root. Baseband/software version is now n900pvpudnk4. I found a 4.4 version of cwm and twrp. Upgraded my odin from 3.0.7 to 3.0.9. For some reason I cannot get the device to flash either of these recoveries. Odin gives these messages:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
The device then reboots and gives me message:
<ID:0/003> Removed!!
But when I reboot into recovery it just goes into download mode again. Any suggestions?
Hardware version n900p.12
Kernel 3.4.0-2593013 [email protected] #1
Click to expand...
Click to collapse
Upgrading odin from 3.07 to 3.09 won't make any difference. You are doing something else wrong. Since you did not list which box you used i.e. should be the PDA box, please click on "rom flashing basics in my signature " all the info you need is there including the links you need. Enjoy !!!
To ensure your doing all the steps right go on YouTube and search for Sprint Galaxy Note 3 Odin and follow the video step by step.
Error with the topic
Should be Samsung Galaxy S6, my bad
I have read a lot of information on this forum about how to install a Stock Rom, I'm new on this and I installed a custom rom and everything was working fine until 2 days ago when I ran out of battery and the phone entered a bootloop, I tried to follow a tutorial and end up deleting the OS with the TWRP, bottomline right now I'm using Odin trying to install a Stock Rom but getting an error:
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
I read about flashing the BL before and I extracted the boot.img from the TAR and created a tar.md5 and when trying to use Odin with only the BL I got this:
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
I'm running out of ideas at the moment and would like to request your help
You need to make sure you're using the same version of the firmware or newer.
es0tericcha0s said:
You need to make sure you're using the same version of the firmware or newer.
Click to expand...
Click to collapse
I'm using the latest one avaiable in Sammobile
Just double checking, but you're using the one for the correct model? There's a g900"L" and g900"i"...
es0tericcha0s said:
Just double checking, but you're using the one for the correct model? There's a g900"L" and g900"i"...
Click to expand...
Click to collapse
I'm getting it from,
sammobile.com/firmwares/database/SM-G920I
If you have the serial number, you can try Samsung Smart Switch for PC in Emergency Mode. That might get around these issues you are having...
My device lost its signal, then after I check IMEI there's no IMEI also, so I search for solution then I found that I have to reinstall the stock rom for my S6 edge.
On the process after so long downloading the rom from sammobile. Im stuck on the process of NAND Write Start!! and nothing is happening. Im using Odin3
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
I WILL PAY TO WHOM WHO WILL FIX MY ISSUE FAST
alph19 said:
My device lost its signal, then after I check IMEI there's no IMEI also, so I search for solution then I found that I have to reinstall the stock rom for my S6 edge.
On the process after so long downloading the rom from sammobile. Im stuck on the process of NAND Write Start!! and nothing is happening. Im using Odin3
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
I WILL PAY TO WHOM WHO WILL FIX MY ISSUE FAST
Click to expand...
Click to collapse
Did you download correct firmware for your phone?
What model you have?
What android version?
Network locked or unlocked?
Which firmware did you try?
Answer these and I can help