Error with the topic
Should be Samsung Galaxy S6, my bad
I have read a lot of information on this forum about how to install a Stock Rom, I'm new on this and I installed a custom rom and everything was working fine until 2 days ago when I ran out of battery and the phone entered a bootloop, I tried to follow a tutorial and end up deleting the OS with the TWRP, bottomline right now I'm using Odin trying to install a Stock Rom but getting an error:
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
I read about flashing the BL before and I extracted the boot.img from the TAR and created a tar.md5 and when trying to use Odin with only the BL I got this:
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
I'm running out of ideas at the moment and would like to request your help
You need to make sure you're using the same version of the firmware or newer.
es0tericcha0s said:
You need to make sure you're using the same version of the firmware or newer.
Click to expand...
Click to collapse
I'm using the latest one avaiable in Sammobile
Just double checking, but you're using the one for the correct model? There's a g900"L" and g900"i"...
es0tericcha0s said:
Just double checking, but you're using the one for the correct model? There's a g900"L" and g900"i"...
Click to expand...
Click to collapse
I'm getting it from,
sammobile.com/firmwares/database/SM-G920I
If you have the serial number, you can try Samsung Smart Switch for PC in Emergency Mode. That might get around these issues you are having...
Related
Hi, I just tried rooting my new Samsung Galaxy S3 through Odin, all was going well until the upgrading stopped after getting to:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
it's like it just froze in the middle of upgrading.
I couldn't add a picture due to the number of my posts.
Would it be safe to remove the usb cable and plug try plugging it through the rear usb slot? On my device's screen it says "do not turn off target!!".
Thanks.
ehrenfest said:
Hi, I just tried rooting my new Samsung Galaxy S3 through Odin, all was going well until the upgrading stopped after getting to:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
You mean you we`re flashing firmware
Click to expand...
Click to collapse
Hey Guys. I need a Pit File for flashing the G925FXXU1AOE3 DBT Stock Firmware on my Galaxy. I have a 1&1 Branding and the galaxy need a repartition to switch from XEG to DBT.
pit file
I also need this pit file.
Why can't somebody without branding upload his pit file?
Just delete the hidden ImG..from the firmware and you are done...
Alex-V said:
Just delete the hidden ImG..from the firmware and you are done...
Click to expand...
Click to collapse
I just tried that. I opened the firmware with powerarchiver and deleted the hidden.img file. Than I tried to flash with odin, but it still gets stuck in "NAND Write Start!!".
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
chik0 said:
I just tried that. I opened the firmware with powerarchiver and deleted the hidden.img file. Than I tried to flash with odin, but it still gets stuck in "NAND Write Start!!".
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
Click to expand...
Click to collapse
Maybe your ODIN is to old. Had the same with ODIN 3.9 and 3.10 but it works with 3.10.6 ...
hi. i`m trying to fix my phone(samsung sm-g920f) using odin and i have some isues.
i put the phone into odin download mode, i put the firmware in odin and it is remain stuck here
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
i also tryed with smart switch and the software cannot recognize the phone.
i think the previous software was android 5.1.1 indonesian firmware.
the phone is stuck in logo screen.
the phone was working before, but after i wipe the cache and wipe everything ( factory reset) it doesn`t work.
what should i do next because it pissed me off.
My device lost its signal, then after I check IMEI there's no IMEI also, so I search for solution then I found that I have to reinstall the stock rom for my S6 edge.
On the process after so long downloading the rom from sammobile. Im stuck on the process of NAND Write Start!! and nothing is happening. Im using Odin3
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
I WILL PAY TO WHOM WHO WILL FIX MY ISSUE FAST
alph19 said:
My device lost its signal, then after I check IMEI there's no IMEI also, so I search for solution then I found that I have to reinstall the stock rom for my S6 edge.
On the process after so long downloading the rom from sammobile. Im stuck on the process of NAND Write Start!! and nothing is happening. Im using Odin3
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
I WILL PAY TO WHOM WHO WILL FIX MY ISSUE FAST
Click to expand...
Click to collapse
Did you download correct firmware for your phone?
What model you have?
What android version?
Network locked or unlocked?
Which firmware did you try?
Answer these and I can help
Some stuff about my device:
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730G/XTC/download/J730GDXU5BRJ1/238833/
I flashed this ROM quite some time ago:
https://forum.xda-developers.com/galaxy-j7-2017/development/cleannouga-romj730f-t3730638
I liked it but I thought about flashing back to stock but Odin (I use 3.12) always fails to write NAND and also freezes my phone to Download Mode whenever I attempt flashing the stock firmware. I searched a lot but nothing seemed to work. I haven't tried the methods used in older versions (e.g. 4.4) so someone might help me link to a working guide or who can help me in this thread.
This is an option that I don't know if it would work. I have a friend with a same but stock device and I plan on flashing TWRP on his phone to backup. Can I transfer that backup file and transfer and restore it on mine? Thanks!
Edit: I dunno if not flashing the latest firmware fails the flash but I'm will try the latest one in case the first one wasn't
Edit2: Okay so I flashed the newly downloaded one but it took too fast (around just 2 seconds) so it probably did not flash everything.
Log:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> sboot.bin.lz4
<ID:0/004> param.bin.lz4
<ID:0/004> cm.bin.lz4
<ID:0/004> boot.img.lz4
<ID:0/004> recovery.img.lz4
<ID:0/004> system.img.lz4
<ID:0/004> userdata.img.lz4
<ID:0/004> modem.bin.lz4
<ID:0/004> cache.img.lz4
<ID:0/004> hidden.img.lz4
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
And it didn't return to normal. Please help. Thanks
akiota said:
Some stuff about my device:
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730G/XTC/download/J730GDXU5BRJ1/238833/
I flashed this ROM quite some time ago:
https://forum.xda-developers.com/galaxy-j7-2017/development/cleannouga-romj730f-t3730638
I liked it but I thought about flashing back to stock but Odin (I use 3.12) always fails to write NAND and also freezes my phone to Download Mode whenever I attempt flashing the stock firmware. I searched a lot but nothing seemed to work. I haven't tried the methods used in older versions (e.g. 4.4) so someone might help me link to a working guide or who can help me in this thread.
This is an option that I don't know if it would work. I have a friend with a same but stock device and I plan on flashing TWRP on his phone to backup. Can I transfer that backup file and transfer and restore it on mine? Thanks!
Edit: I dunno if not flashing the latest firmware fails the flash but I'm will try the latest one in case the first one wasn't
Edit2: Okay so I flashed the newly downloaded one but it took too fast (around just 2 seconds) so it probably did not flash everything.
Log:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> sboot.bin.lz4
<ID:0/004> param.bin.lz4
<ID:0/004> cm.bin.lz4
<ID:0/004> boot.img.lz4
<ID:0/004> recovery.img.lz4
<ID:0/004> system.img.lz4
<ID:0/004> userdata.img.lz4
<ID:0/004> modem.bin.lz4
<ID:0/004> cache.img.lz4
<ID:0/004> hidden.img.lz4
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
And it didn't return to normal. Please help. Thanks
Click to expand...
Click to collapse
Good night
I suggest for You
1. Copy all files to SD
2. Enter stock recovery
3. Factory reset wipe all data
4. Download Odin
5. Install twrp
6. Flash custom ROM 8.1
7. I suggest Maef ROM or E dos
If this ROM runs perfectly
Alternate with custom or stock
Good luck
hacker812c said:
Good night
I suggest for You
1. Copy all files to SD
2. Enter stock recovery
3. Factory reset wipe all data
4. Download Odin
5. Install twrp
6. Flash custom ROM 8.1
7. I suggest Maef ROM or E dos
If this ROM runs perfectly
Alternate with custom or stock
Good luck
Click to expand...
Click to collapse
Thanks so much. I'd like it to be as stock as it can though so as I asked earlier, is it possible to restore a backup from another similar device? If not, then I'll do everything according to what you suggested..
akiota said:
Thanks so much. I'd like it to be as stock as it can though so as I asked earlier, is it possible to restore a backup from another similar device? If not, then I'll do everything according to what you suggested..
Click to expand...
Click to collapse
Maef ROM is stock
Use Helios Kernel is stable and Magnific
thanks for the tutorials, having the same issue
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> Total Binary size: 2801 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)