Some stuff about my device:
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730G/XTC/download/J730GDXU5BRJ1/238833/
I flashed this ROM quite some time ago:
https://forum.xda-developers.com/galaxy-j7-2017/development/cleannouga-romj730f-t3730638
I liked it but I thought about flashing back to stock but Odin (I use 3.12) always fails to write NAND and also freezes my phone to Download Mode whenever I attempt flashing the stock firmware. I searched a lot but nothing seemed to work. I haven't tried the methods used in older versions (e.g. 4.4) so someone might help me link to a working guide or who can help me in this thread.
This is an option that I don't know if it would work. I have a friend with a same but stock device and I plan on flashing TWRP on his phone to backup. Can I transfer that backup file and transfer and restore it on mine? Thanks!
Edit: I dunno if not flashing the latest firmware fails the flash but I'm will try the latest one in case the first one wasn't
Edit2: Okay so I flashed the newly downloaded one but it took too fast (around just 2 seconds) so it probably did not flash everything.
Log:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> sboot.bin.lz4
<ID:0/004> param.bin.lz4
<ID:0/004> cm.bin.lz4
<ID:0/004> boot.img.lz4
<ID:0/004> recovery.img.lz4
<ID:0/004> system.img.lz4
<ID:0/004> userdata.img.lz4
<ID:0/004> modem.bin.lz4
<ID:0/004> cache.img.lz4
<ID:0/004> hidden.img.lz4
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
And it didn't return to normal. Please help. Thanks
akiota said:
Some stuff about my device:
https://www.sammobile.com/firmwares/galaxy-j7-pro/SM-J730G/XTC/download/J730GDXU5BRJ1/238833/
I flashed this ROM quite some time ago:
https://forum.xda-developers.com/galaxy-j7-2017/development/cleannouga-romj730f-t3730638
I liked it but I thought about flashing back to stock but Odin (I use 3.12) always fails to write NAND and also freezes my phone to Download Mode whenever I attempt flashing the stock firmware. I searched a lot but nothing seemed to work. I haven't tried the methods used in older versions (e.g. 4.4) so someone might help me link to a working guide or who can help me in this thread.
This is an option that I don't know if it would work. I have a friend with a same but stock device and I plan on flashing TWRP on his phone to backup. Can I transfer that backup file and transfer and restore it on mine? Thanks!
Edit: I dunno if not flashing the latest firmware fails the flash but I'm will try the latest one in case the first one wasn't
Edit2: Okay so I flashed the newly downloaded one but it took too fast (around just 2 seconds) so it probably did not flash everything.
Log:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> sboot.bin.lz4
<ID:0/004> param.bin.lz4
<ID:0/004> cm.bin.lz4
<ID:0/004> boot.img.lz4
<ID:0/004> recovery.img.lz4
<ID:0/004> system.img.lz4
<ID:0/004> userdata.img.lz4
<ID:0/004> modem.bin.lz4
<ID:0/004> cache.img.lz4
<ID:0/004> hidden.img.lz4
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
And it didn't return to normal. Please help. Thanks
Click to expand...
Click to collapse
Good night
I suggest for You
1. Copy all files to SD
2. Enter stock recovery
3. Factory reset wipe all data
4. Download Odin
5. Install twrp
6. Flash custom ROM 8.1
7. I suggest Maef ROM or E dos
If this ROM runs perfectly
Alternate with custom or stock
Good luck
hacker812c said:
Good night
I suggest for You
1. Copy all files to SD
2. Enter stock recovery
3. Factory reset wipe all data
4. Download Odin
5. Install twrp
6. Flash custom ROM 8.1
7. I suggest Maef ROM or E dos
If this ROM runs perfectly
Alternate with custom or stock
Good luck
Click to expand...
Click to collapse
Thanks so much. I'd like it to be as stock as it can though so as I asked earlier, is it possible to restore a backup from another similar device? If not, then I'll do everything according to what you suggested..
akiota said:
Thanks so much. I'd like it to be as stock as it can though so as I asked earlier, is it possible to restore a backup from another similar device? If not, then I'll do everything according to what you suggested..
Click to expand...
Click to collapse
Maef ROM is stock
Use Helios Kernel is stable and Magnific
thanks for the tutorials, having the same issue
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> Total Binary size: 2801 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> cm.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Related
Hello, I am having trouble flashing a stock rom (as I am soft-bricked).
I originally tried the rom from here but that gave me an error similar to the error that the person had in the following thread.
I found this thread: http://forum.xda-developers.com/showthread.php?t=2433963&page=2 but when I tried to flash the provided ROM it gave me this error on ODIN:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
The error on the download screen is as follows:
SW REV. CHECK FAIL : fused : 5, Binary : 3
Not sure what to do here. Can't seem to flash anything with out it giving me some sort of error.
What I was doing that soft bricked me was I successfully rooted and then tried to flash TWRP onto my phone. Now it just boots straight into download mode, or if I boot it into download and cancel just reboots into download mode.
Any help? Thanks!
EDIT: Found another thread after further research. Think I found a working recovery. Trying to flash this. No errors so far. Will get back to you if it works.
EDIT2: Got it to work! I used this if anyone else had a similar issue.
Medinita said:
Hello, I am having trouble flashing a stock rom (as I am soft-bricked).
I originally tried the rom from here but that gave me an error similar to the error that the person had in the following thread.
I found this thread: http://forum.xda-developers.com/showthread.php?t=2433963&page=2 but when I tried to flash the provided ROM it gave me this error on ODIN:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
The error on the download screen is as follows:
SW REV. CHECK FAIL : fused : 5, Binary : 3
Not sure what to do here. Can't seem to flash anything with out it giving me some sort of error.
What I was doing that soft bricked me was I successfully rooted and then tried to flash TWRP onto my phone. Now it just boots straight into download mode, or if I boot it into download and cancel just reboots into download mode.
Any help? Thanks!
EDIT: Found another thread after further research. Think I found a working recovery. Trying to flash this. No errors so far. Will get back to you if it works.
EDIT2: Got it to work! I used this if anyone else had a similar issue.
Click to expand...
Click to collapse
The reason it failed in the first place, just so you're aware and for others who encounter your thread, you tried flashing a firmware older than the one installed on your phone, perhaps from an OTA or just straight up an older rom, and the FAIL (Auth) error is what happens when you do that. You have to flash with a rom version that is the same as or newer than what's on your phone.
flashed a rom in a slot instead of stock... so now its all jacked up.. when i try wipe on odin or downgrade i get this (below)
Just tried the nc5 upgrade ap... now it auto boots to recovery and says E: Failed to mount... crap I have work in morning
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> system.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Frustratez said:
flashed a rom in a slot instead of stock... so now its all jacked up.. when i try wipe on odin or downgrade i get this (below)
Just tried the nc5 upgrade ap... now it auto boots to recovery and says E: Failed to mount... crap I have work in morning
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> system.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
UPDATE: Gf walks in says hey try to flash the upgrade then the downgrade... I do it ... s4 set up is now on my screen.. lmao wtf? weird fix but oh well
Hey everyone
Having read many threads on this issue I would appreciate help for my specific case. I got a defective device from a friend that wouldn't start anymore (introductory Samsung animation was playing repeatedly). I then tried to flash "GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9" to eventually install CM 10.1.3 and then factory reset to make sure the brick bug is not an issue. However, I was not able to flash CWM, because it gets stuck at "NAND Write Start" and eventually fails (see below). Interestingly, I flashed another i9100 flawlessly only a few days ago with the exact same setting. Nonetheless I tried different Odin versions as well as different usb ports and cables.
I have no idea what kind of kernel or android version was running on the device and I can now only get into download mode.
When reading this guide I came across two problems. First, flashing a kernel - some other thread recommended "Siyah-s2-v5.0.1" - was unsuccessful. Second, I wasn't sure if I should try to flash the ICS version mentioned in this thread.
Some mentioned falling back to flashing PIT-files, but because recovery mode is not available, I cannot use the "emmc partition scanner" to identify the correct PIT-file to flash.
I would really like to save this device, so someone else may enjoy using it again in the future. Thanks in advance for any help!
Cheers
sNiXx
ODIN 3.09
Code:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> zImage
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ODIN 1.3
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Could anyone please help me out with this issue? I would appreciate it, if I could get the device running again.
Thanks in advance for help or tips!
as the title say i was rooting my SM-G925i by a rom that i got from here XDA and after it says pass phone stuck and give me that error i googled it and found many solutions and I've tried it all and same thing i downloaded many firmwere and the official one tried to re-root or install another custom room and the same everytime i use odin to flash anyone of it i get the same error fail with this status
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1005)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can't find i solution for that and i used twrp and it worked and i got pass so normally i got into the recovery mode of twrp but i don't even have the ROM on my mobile to install it so it wont work can any one please tell me how to fix this ?!
Error with the topic
Should be Samsung Galaxy S6, my bad
I have read a lot of information on this forum about how to install a Stock Rom, I'm new on this and I installed a custom rom and everything was working fine until 2 days ago when I ran out of battery and the phone entered a bootloop, I tried to follow a tutorial and end up deleting the OS with the TWRP, bottomline right now I'm using Odin trying to install a Stock Rom but getting an error:
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
I read about flashing the BL before and I extracted the boot.img from the TAR and created a tar.md5 and when trying to use Odin with only the BL I got this:
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
I'm running out of ideas at the moment and would like to request your help
You need to make sure you're using the same version of the firmware or newer.
es0tericcha0s said:
You need to make sure you're using the same version of the firmware or newer.
Click to expand...
Click to collapse
I'm using the latest one avaiable in Sammobile
Just double checking, but you're using the one for the correct model? There's a g900"L" and g900"i"...
es0tericcha0s said:
Just double checking, but you're using the one for the correct model? There's a g900"L" and g900"i"...
Click to expand...
Click to collapse
I'm getting it from,
sammobile.com/firmwares/database/SM-G920I
If you have the serial number, you can try Samsung Smart Switch for PC in Emergency Mode. That might get around these issues you are having...