Hi, I just tried rooting my new Samsung Galaxy S3 through Odin, all was going well until the upgrading stopped after getting to:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
it's like it just froze in the middle of upgrading.
I couldn't add a picture due to the number of my posts.
Would it be safe to remove the usb cable and plug try plugging it through the rear usb slot? On my device's screen it says "do not turn off target!!".
Thanks.
ehrenfest said:
Hi, I just tried rooting my new Samsung Galaxy S3 through Odin, all was going well until the upgrading stopped after getting to:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
You mean you we`re flashing firmware
Click to expand...
Click to collapse
Related
<ID:1/005> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:1/005> Odin v.3 engine (ID:5)..
<ID:0/004> File analysis..
<ID:1/005> File analysis..
<ID:1/005> SetupConnection..
<ID:0/004> SetupConnection..
<ID:1/005> Initialzation..
<ID:1/005> Get PIT for mapping..
<ID:1/005> Firmware update start..
<ID:1/005> boot.bin
<ID:0/004> Can't open the serial(COM) port.
Why does this happen every time I try installing Jelly bean..
Help me guys.. please! THANKS!
Leeblitz said:
<ID:1/005> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:1/005> Odin v.3 engine (ID:5)..
<ID:0/004> File analysis..
<ID:1/005> File analysis..
<ID:1/005> SetupConnection..
<ID:0/004> SetupConnection..
<ID:1/005> Initialzation..
<ID:1/005> Get PIT for mapping..
<ID:1/005> Firmware update start..
<ID:1/005> boot.bin
<ID:0/004> Can't open the serial(COM) port.
Why does this happen every time I try installing Jelly bean..
Help me guys.. please! THANKS!
Click to expand...
Click to collapse
try with a diff USB port alltogether and see, also please kill all the 'Kies' process in the background since it affects with ODIN performance
Sun90 said:
try with a diff USB port alltogether and see, also please kill all the 'Kies' process in the background since it affects with ODIN performance
Click to expand...
Click to collapse
yep i had also experienced the same problem. Just go to Task Manager and try to end all the process with starts with Kies.:good:
Sun90 said:
try with a diff USB port alltogether and see, also please kill all the 'Kies' process in the background since it affects with ODIN performance
Click to expand...
Click to collapse
I did what you told me and this is what happened...
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> Complete(Write) operation failed.
What to do now?
Help me please..
Hi pal...
this same thing is going on http://forum.xda-developers.com/showthread.php?t=1157231
please have a look at it.
Downloaded the firmware
went to the download mode
opened odin
didn't check re-partition
started and this is what i got:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
For 30 min or more till now
Anybody know a solution?
Thanks in advance
Post lacks information .
Magic Ball does not work sorry .
jje
Which firmware were you on, which did you try flashing?
bhaveshkhatri92 said:
Downloaded the firmware
went to the download mode
opened odin
didn't check re-partition
started and this is what i got:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
For 30 min or more till now
Anybody know a solution?
Thanks in advance
Click to expand...
Click to collapse
Unfortunately I think its a problem with internal memory not been able to write on.I think its an SDS, same case of a friend we took it to a repair shop (No warranty ) but they said that only changing the motherboard can fix the problem.
I hope its not your case.If it is and your phone is still on warranty take it to them they will fix it for free.
Hey Guys. I need a Pit File for flashing the G925FXXU1AOE3 DBT Stock Firmware on my Galaxy. I have a 1&1 Branding and the galaxy need a repartition to switch from XEG to DBT.
pit file
I also need this pit file.
Why can't somebody without branding upload his pit file?
Just delete the hidden ImG..from the firmware and you are done...
Alex-V said:
Just delete the hidden ImG..from the firmware and you are done...
Click to expand...
Click to collapse
I just tried that. I opened the firmware with powerarchiver and deleted the hidden.img file. Than I tried to flash with odin, but it still gets stuck in "NAND Write Start!!".
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
chik0 said:
I just tried that. I opened the firmware with powerarchiver and deleted the hidden.img file. Than I tried to flash with odin, but it still gets stuck in "NAND Write Start!!".
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
Click to expand...
Click to collapse
Maybe your ODIN is to old. Had the same with ODIN 3.9 and 3.10 but it works with 3.10.6 ...
hi. i`m trying to fix my phone(samsung sm-g920f) using odin and i have some isues.
i put the phone into odin download mode, i put the firmware in odin and it is remain stuck here
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
i also tryed with smart switch and the software cannot recognize the phone.
i think the previous software was android 5.1.1 indonesian firmware.
the phone is stuck in logo screen.
the phone was working before, but after i wipe the cache and wipe everything ( factory reset) it doesn`t work.
what should i do next because it pissed me off.
Error with the topic
Should be Samsung Galaxy S6, my bad
I have read a lot of information on this forum about how to install a Stock Rom, I'm new on this and I installed a custom rom and everything was working fine until 2 days ago when I ran out of battery and the phone entered a bootloop, I tried to follow a tutorial and end up deleting the OS with the TWRP, bottomline right now I'm using Odin trying to install a Stock Rom but getting an error:
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
I read about flashing the BL before and I extracted the boot.img from the TAR and created a tar.md5 and when trying to use Odin with only the BL I got this:
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
I'm running out of ideas at the moment and would like to request your help
You need to make sure you're using the same version of the firmware or newer.
es0tericcha0s said:
You need to make sure you're using the same version of the firmware or newer.
Click to expand...
Click to collapse
I'm using the latest one avaiable in Sammobile
Just double checking, but you're using the one for the correct model? There's a g900"L" and g900"i"...
es0tericcha0s said:
Just double checking, but you're using the one for the correct model? There's a g900"L" and g900"i"...
Click to expand...
Click to collapse
I'm getting it from,
sammobile.com/firmwares/database/SM-G920I
If you have the serial number, you can try Samsung Smart Switch for PC in Emergency Mode. That might get around these issues you are having...