I have a SM-N900P ON ANDROID 4.4.4. Rooted the device with CF Auto Root. Baseband/software version is now n900pvpudnk4. I found a 4.4 version of cwm and twrp. Upgraded my odin from 3.0.7 to 3.0.9. For some reason I cannot get the device to flash either of these recoveries. Odin gives these messages:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
The device then reboots and gives me message:
<ID:0/003> Removed!!
But when I reboot into recovery it just goes into download mode again. Any suggestions?
Hardware version n900p.12
Kernel 3.4.0-2593013 [email protected] #1
Are you entering download from a completely powered off state?
Sent from my SM-N900P using Tapatalk 2
penywyse said:
I have a SM-N900P ON ANDROID 4.4.4. Rooted the device with CF Auto Root. Baseband/software version is now n900pvpudnk4. I found a 4.4 version of cwm and twrp. Upgraded my odin from 3.0.7 to 3.0.9. For some reason I cannot get the device to flash either of these recoveries. Odin gives these messages:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
The device then reboots and gives me message:
<ID:0/003> Removed!!
But when I reboot into recovery it just goes into download mode again. Any suggestions?
Hardware version n900p.12
Kernel 3.4.0-2593013 [email protected] #1
Click to expand...
Click to collapse
Upgrading odin from 3.07 to 3.09 won't make any difference. You are doing something else wrong. Since you did not list which box you used i.e. should be the PDA box, please click on "rom flashing basics in my signature " all the info you need is there including the links you need. Enjoy !!!
To ensure your doing all the steps right go on YouTube and search for Sprint Galaxy Note 3 Odin and follow the video step by step.
Related
hi guys .......... good morning from saudi arabia
my question is my device(Samsung Galaxy S II I9100) does not get access to download jelly bean because (odin v1.83) stoped while downloading, the main problem is i follow the instruction literally and . after that,its say (firmware upgrade encountered an issue please select recovery mode in kies and try again )
then i tried to download it again and that what is happened :-
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> data.img
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
is sopped in (<ID:0/003> hidden.img) every single time
now guys help me please your man in trouble.
this is my first participating :victory:
Download 1.85 or 3.04 I think 1.83 incompatible with sgs2 and see in task manager is Kies on if yes then kill it...
Regards,
Paulius
hi guys .......... good morning from saudi arabia
my question is my device(Samsung Galaxy S II I9100) does not get access to download jelly bean because (odin v1.83) stoped while downloading, the main problem is i follow the instruction literally and . after that,its say (firmware upgrade encountered an issue please select recovery mode in kies and try again )
then i tried to download it again and that what is happened :-
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> data.img
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
is sopped in (<ID:0/003> hidden.img) every single time
now guys help me please your man in trouble.
this is my first participating
yooogh said:
hi guys .......... good morning from saudi arabia
my question is my device(Samsung Galaxy S II I9100) does not get access to download jelly bean because (odin v1.83) stoped while downloading, the main problem is i follow the instruction literally and . after that,its say (firmware upgrade encountered an issue please select recovery mode in kies and try again )
then i tried to download it again and that what is happened :-
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> data.img
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
is sopped in (<ID:0/003> hidden.img) every single time
now guys help me please your man in trouble.
this is my first participating
Click to expand...
Click to collapse
Download the latest Odin from here
Make sure you've installed the right firmware with the right kernil for your device. Re-install the firmware after making sure it is the right one. Search the forum's threads to check some how-to guides of how to flash ROMs and/or Kernels.
Let me know what happens with you!
Don't duplicate threads...
Happy new year
Paulius
I recently installed Omega ROM and to my luck the wifi stopped working. I tried the steps they recommended and did exactly what they told me except I used the regular Odin program instead of the mobile. I tried flashing the modems on both the pda and phone section in odin and this is what happened:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Can anyone help with this? Im so tired of not having wifi..
Flash back to stock and start over doing the directions to the T.
Short answer - just reflash kernel, if it does not help - reflash your ROM and then kernel again. And if this does not help - you can always back to stock with full wipe (backup your data before).
My device lost its signal, then after I check IMEI there's no IMEI also, so I search for solution then I found that I have to reinstall the stock rom for my S6 edge.
On the process after so long downloading the rom from sammobile. Im stuck on the process of NAND Write Start!! and nothing is happening. Im using Odin3
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
I WILL PAY TO WHOM WHO WILL FIX MY ISSUE FAST
alph19 said:
My device lost its signal, then after I check IMEI there's no IMEI also, so I search for solution then I found that I have to reinstall the stock rom for my S6 edge.
On the process after so long downloading the rom from sammobile. Im stuck on the process of NAND Write Start!! and nothing is happening. Im using Odin3
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
I WILL PAY TO WHOM WHO WILL FIX MY ISSUE FAST
Click to expand...
Click to collapse
Did you download correct firmware for your phone?
What model you have?
What android version?
Network locked or unlocked?
Which firmware did you try?
Answer these and I can help
Hello,
yesterday i decided to install a new custom rom. Had Note 7 ROM running for a half year.
At first i updated TWRP, after that my touchpad is not working correctly.(also in TWRP) I have to click 1 inch above the buttons to hit them...
So after a few tries to get a new ROM running(tried a few), finally one worked, but the problem with the touchscreen was still there. After that, i decided to install the stock firmware. Downloaded it from SAMMobile, but even that i can't install in Odin.
I already tried to wipe the complete phone with twrp and tried it with Pit file, but i get still the same error in Odin.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone help?